I am trying to setup zookeeper on ec2 two instances. as given here and here.
I am trying to run zookeeper which fails with an error:
command: bin/zkCli.sh -server localhost:2181
> 2015-03-15 00:22:35,644 [myid:] - INFO [main:ZooKeeper#438] - Initiating client connection, connectString=localhost:2181 sessionTimeout=30000 watcher=org.apache.zookeeper.ZooKeeperMain$MyWatcher#3ff0efca
Welcome to ZooKeeper!
2015-03-15 00:22:35,671 [myid:] - INFO [main-SendThread(localhost:2181):ClientCnxn$SendThread#975] - Opening socket connection to server localhost/127.0.0.1:2181. Will not attempt to authenticate using SASL (unknown error)
JLine support is enabled
2015-03-15 00:22:35,677 [myid:] - WARN [main-SendThread(localhost:2181):ClientCnxn$SendThread#1102] - Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:739)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
[zk: localhost:2181(CONNECTING) 0] 2015-03-15 00:22:36,796 [myid:] - INFO [main-SendThread(localhost:2181):ClientCnxn$SendThread#975] - Opening socket connection to server localhost/127.0.0.1:2181. Will not attempt to authenticate using SASL (unknown error)
2015-03-15 00:22:36,797 [myid:] - WARN [main-SendThread(localhost:2181):ClientCnxn$SendThread#1102] - Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
zoo.cfg as bellow
tickTime=2000
initLimit=10
syncLimit=5
dataDir=/var/lib/zookeeper
clientPort=2181
server.1=localhost:2888:3888
server.2=<My ec2 private IPs>:2889:3889
also I have created myId file as on both ec2 instances - /var/lib/zookeeper/myid
I also tried to edit /ect/hosts file but still facing the same issue.
also how I can start both of the zookeeper instances by 1 command?
Note: Server get started successfully if I tried with bin/zkCli.sh start command.
Thanks in advance!
look zk log zookeeper.out，if there have connection limit error, configure the following to zoo.cfg.
# the maximum number of client connections.
# increase this if you need to handle more clients
maxClientCnxns=60
This is temporary error , for mine after some time , It gone away :-
This is my zoo.conf file ::-
Dir=../data
clientPort=2181
tickTime=2000
initLimit=5
This error occurred when I forgot to run% ZOOKEEPER_HOME% \ bin \ zkserver.cmd
By running, the problem has been resolved.
Correct this property on the server.properties
default would be localhost change it to match the zookeeper server starup ip and port
zookeeper.connect=0.0.0.0:2181
Related
I am trying to import data from SQL Server to Google Cloud Storage which I will later on upload to BigQuery. I am doing all of this through Google's Cloud Shell.
I have done the initial steps of downloading Sqoop and Sql server JDBC file and downloading and then uploading it to a specific google cloud storage. I have also created a Google Dataproc cluster to submit the Sqoop job but when I try to use the submission code it throws me a couple of error.
I am following this process (https://medium.com/datamindedbe/import-sql-server-data-in-bigquery-d640441d5d56), in my case I am trying to extract one table first.Code to submit a job through dataproc
WHAT I HAVE TRIED
I do have the SQL server jdbc .jar (mssql-jdbc-8.2.1.jre8.jar) file
in cloud storage with other dependent files
I have also checked my TCP/IP connection in my SQL Server 2014 and it
is in the recommended state as the error suggests
CODE I USED TO SUBMIT A SQOOP JOB TO DATAPROC CLUSTER
CLUSTERNAME="sqoop-cluster"
BUCKET="gs://sqoop-bucket-20092021"
libs=`gsutil ls $BUCKET/jars | paste -sd, --`
JDBC_STR="jdbc:sqlserver://RUKSQLRS01:1433;databaseName=RUKDataWarehouse"
SQL_USER="RUKSQLDataWarehouse_Reporting"
SQL_PASS="gs://sqoop-bucket-20092021/creds/sqoop.password"
TABLE="LBD_Task"
SCHEMA="dbo"
gcloud dataproc jobs submit hadoop \
--region europe-west2 \
--cluster="$CLUSTERNAME"\
--jars=$libs \
--class=org.apache.sqoop.Sqoop \
-- \
import \
-Dorg.apache.sqoop.splitter.allow_text_splitter=true \
-Dmapreduce.job.user.classpath.first=true \
--connect "$JDBC_STR" \
--username "$SQL_USER" \
--password-file "$SQL_PASS" \
--table "$SCHEMA.$TABLE" \
--warehouse-dir "$BUCKET/output/$TABLE" \
--num-mappers 1 \
--as-avrodatafile
ERROR I AM GETTING
21/09/22 11:30:46 WARN tool.SqoopTool: $SQOOP_CONF_DIR has not been set in the environment. Cannot check for additional configuration.
21/09/22 11:30:46 INFO sqoop.Sqoop: Running Sqoop version: 1.4.7
21/09/22 11:30:48 WARN sqoop.ConnFactory: $SQOOP_CONF_DIR has not been set in the environment. Cannot check for additional configuration.
21/09/22 11:30:48 INFO manager.SqlManager: Using default fetchSize of 1000
21/09/22 11:30:48 INFO tool.CodeGenTool: Beginning code generation
21/09/22 11:31:02 ERROR manager.SqlManager: Error executing statement: com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host RUKSQLRS01, port 1433 has failed. Error: "RUKSQLRS01. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall.".
com.microsoft.sqlserver.jdbc.SQLServerException: The TCP/IP connection to the host RUKSQLRS01, port 1433 has failed. Error: "RUKSQLRS01. Verify the connection properties. Make sure that an instance of SQL Server is running on the host and accepting TCP/IP connections at the port. Make sure that TCP connections to the port are not blocked by a firewall.".
at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDriverError(SQLServerException.java:227)
at com.microsoft.sqlserver.jdbc.SQLServerException.ConvertConnectExceptionToSQLServerException(SQLServerException.java:284)
at com.microsoft.sqlserver.jdbc.SocketFinder.findSocket(IOBuffer.java:2435)
at com.microsoft.sqlserver.jdbc.TDSChannel.open(IOBuffer.java:635)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:2010)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:1687)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectInternal(SQLServerConnection.java:1528)
at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:866)
at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:569)
at java.sql.DriverManager.getConnection(DriverManager.java:664)
at java.sql.DriverManager.getConnection(DriverManager.java:247)
at org.apache.sqoop.manager.SqlManager.makeConnection(SqlManager.java:904)
at org.apache.sqoop.manager.GenericJdbcManager.getConnection(GenericJdbcManager.java:59)
at org.apache.sqoop.manager.SqlManager.execute(SqlManager.java:763)
at org.apache.sqoop.manager.SqlManager.execute(SqlManager.java:786)
at org.apache.sqoop.manager.SqlManager.getColumnInfoForRawQuery(SqlManager.java:289)
at org.apache.sqoop.manager.SqlManager.getColumnTypesForRawQuery(SqlManager.java:260)
at org.apache.sqoop.manager.SqlManager.getColumnTypes(SqlManager.java:246)
at org.apache.sqoop.manager.ConnManager.getColumnTypes(ConnManager.java:327)
at org.apache.sqoop.orm.ClassWriter.getColumnTypes(ClassWriter.java:1872)
at org.apache.sqoop.orm.ClassWriter.generate(ClassWriter.java:1671)
at org.apache.sqoop.tool.CodeGenTool.generateORM(CodeGenTool.java:106)
at org.apache.sqoop.tool.ImportTool.importTable(ImportTool.java:501)
at org.apache.sqoop.tool.ImportTool.run(ImportTool.java:628)
at org.apache.sqoop.Sqoop.run(Sqoop.java:147)
at org.apache.hadoop.util.ToolRunner.run(ToolRunner.java:76)
at org.apache.sqoop.Sqoop.runSqoop(Sqoop.java:183)
at org.apache.sqoop.Sqoop.runTool(Sqoop.java:234)
at org.apache.sqoop.Sqoop.runTool(Sqoop.java:243)
at org.apache.sqoop.Sqoop.main(Sqoop.java:252)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at com.google.cloud.hadoop.services.agent.job.shim.HadoopRunClassShim.main(HadoopRunClassShim.java:19)
21/09/22 11:31:02 ERROR tool.ImportTool: Import failed: java.io.IOException: No columns to generate for ClassWriter
at org.apache.sqoop.orm.ClassWriter.generate(ClassWriter.java:1677)
at org.apache.sqoop.tool.CodeGenTool.generateORM(CodeGenTool.java:106)
at org.apache.sqoop.tool.ImportTool.importTable(ImportTool.java:501)
at org.apache.sqoop.tool.ImportTool.run(ImportTool.java:628)
at org.apache.sqoop.Sqoop.run(Sqoop.java:147)
at org.apache.hadoop.util.ToolRunner.run(ToolRunner.java:76)
at org.apache.sqoop.Sqoop.runSqoop(Sqoop.java:183)
at org.apache.sqoop.Sqoop.runTool(Sqoop.java:234)
at org.apache.sqoop.Sqoop.runTool(Sqoop.java:243)
at org.apache.sqoop.Sqoop.main(Sqoop.java:252)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:498)
at com.google.cloud.hadoop.services.agent.job.shim.HadoopRunClassShim.main(HadoopRunClassShim.java:19)
This seems to be a networking issue. Your SQL server is outside of GCP and you are trying to access it through hostname. You need to use either external IP and setup firewall rules on the SQL server side to allow accessing from GCP, or setup VPN between your GCP VPC network and the SQL server's network and access SQL server through internal IP.
I have a SolrCloud cluster (6.6) setup with external Zookeeper Ensemble (3.4.8) of 5 nodes. Recently, one machine (ip1:port1) that run 1 Zookeeper with id=1 went down. This is what I've done to replace zookeeper:
Start zookeeper in another machine with the same id (=1).
Change zoo.cfg in 4 live zookeeper to match new zookeeper server and restart.
Update ZK_HOST variable in solr.in.sh to match new zookeeper server.
Restart solr.
After that, my solr cluster seemed to functioning well, but in solr.log, it looked like solr client and zookeeper servers still try to connect to the old zookeeper:
Solr log
2017-12-01 15:04:38.782 WARN (Timer-0-SendThread(ip1:port1)) [ ] o.a.z.ClientCnxn Client session timed out, have not heard from server in 30029ms for sessionid 0x0
2017-12-01 15:04:40.807 WARN (Timer-0-SendThread(ip1:port1)) [ ] o.a.z.ClientCnxn Client session timed out, have not heard from server in 31030ms for sessionid 0x0
Zookeeper log:
2017-12-01 13:53:57,972 [myid:] - INFO [main-SendThread(ip1:port1):ClientCnxn$SendThread#1032] - Opening socket connection to server ip1:port1. Will not attempt to authenticate using SASL (unknown error)
2017-12-01 13:54:03,972 [myid:] - WARN [main-SendThread(ip1:port1):ClientCnxn$SendThread#1162] - Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.NoRouteToHostException: No route to host
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1141)
2017-12-01 13:54:05,074 [myid:] - INFO [main-SendThread(ip1:port1):ClientCnxn$SendThread#1032] - Opening socket connection to server ip1:port1. Will not attempt to authenticate using SASL (unknown error)
2017-12-01 13:54:06,974 [myid:] - WARN [main-SendThread(ip1:port1):ClientCnxn$SendThread#1162] - Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
I've done some search in add/remove zookeeper but didn't find a document for it. My zookeeper version (3.4.7) is not supported for dynamic reconfiguration (which is in zookeeper 3.5).
Is there a way I can manually remove/add zookeeper server from ensemble?
Thanks for your attention!
details : Mule 3.8, CassendraDB downloaded from mulesoft exchange, Cassandra version 3.x, port no : 9042.
The Following error occurs when I test connection in cassandra connector configuration.
Error : org.mule.api.ConnectionException: Read a negative frame size (-2147483648)! at com.mulesoft.mule.cassandradb.CassandraDBConnector.connect(CassandraDBConnector.java:101) at com.mulesoft.mule.cassandradb.connectivity.CassandraDBConnectorConnectionFactory.makeObject(CassandraDBConnectorConnectionFactory.java:52) at org.apache.commons.pool.impl.GenericKeyedObjectPool.borrowObject(GenericKeyedObjectPool.java:1220) at com.mulesoft.mule.cassandradb.connectivity.CassandraDBConnectorConnectionManager.acquireConnection(CassandraDBConnectorConnectionManager.java:269) at com.mulesoft.mule.cassandradb.connectivity.CassandraDBConnectorConnectionManager.test(CassandraDBConnectorConnectionManager.java:351) at org.mule.tooling.metadata.api.utils.ConnectionTester.internalTestConnection(ConnectionTester.java:88) at org.mule.tooling.metadata.api.utils.ConnectionTester.testConnectionFor(ConnectionTester.java:113) at org.mule.tooling.messageflow.action.TestConnectorConnectionFromMuleConfigAction$1$1$1$1.call(TestConnectorConnectionFromMuleConfigAction.java:68) at org.mule.tooling.messageflow.action.TestConnectorConnectionFromMuleConfigAction$1$1$1$1.call(TestConnectorConnectionFromMuleConfigAction.java:1) at org.mule.tooling.utils.SilentRunner.run(SilentRunner.java:25) at org.mule.tooling.core.StudioDesignContextRunner.runSilentWithMuleProject(StudioDesignContextRunner.java:17) at org.mule.tooling.core.StudioDesignContextRunner.runSilentWithMuleProject(StudioDesignContextRunner.java:37) at org.mule.tooling.messageflow.action.TestConnectorConnectionFromMuleConfigAction$1$1$1.run(TestConnectorConnectionFromMuleConfigAction.java:65) at java.lang.Thread.run(Unknown Source) Caused by: org.mule.api.ConnectionException: Read a negative frame size (-2147483648)! at com.mulesoft.mule.cassandradb.CassandraDBUtils.getClient(CassandraDBUtils.java:90) at com.mulesoft.mule.cassandradb.CassandraDBConnector.connect(CassandraDBConnector.java:94) ... 13 more
How can I resolve this error ?
There are a number of potential config changes that you can try.
Check the following in the cassandra.yaml
authenticator: org.apache.cassandra.auth.PasswordAuthenticator
rpc_address: 0.0.0.0
... and consequently ...
broadcast_rpc_address: NOT 0.0.0.0 eg 1.2.3.4
start_rpc: to true
This is because the MuleSoft cassandraDB connector uses apache thrift and not a native connection. You will also need to set the host and Port in the connection settings in studio to be 0.0.0.0 and 9160 respectively. Trst with a blank username/password pair and it should show a correct connection.
I am trying to implement solrcloud.I foollowed doc from official resource https://cwiki.apache.org/confluence/display/solr/Getting+Started+with+SolrCloud .It works fine with embeded zookeper but it is recomended to use external zookeper. I insalled zookeper on my system created data dictionary zookeper on my home folder.I created sub folders named 1 and 2 and created myid file with text 1 and two respectively i each folder as mentioned in doc.I created config files for zookeper zoo.cnfg
clientPort=2181
initLimit=5
syncLimit=2
server.1=localhost:2879:3879
server.2=localhost:2888:3888
and zoo2.cnfg
initLimit=5
syncLimit=2
clientPort=2182
server.1=localhost:2878:3878
server.2=localhost:2888:3888
Next I run cd
bin/zkServer.sh start zoo.cfg
bin/zkServer.sh start zoo2.cfg
And its started sucessfully. next I run
bin/solr start -e cloud -z localhost:2181,localhost:2182
system ask me no of shards etc like in getting started i select port for node1 8990 and for node 2 8991. It gives error
Waiting to see Solr listening on port 8991 [/] Still not seeing Solr listening on 8991 after 30 seconds!
WARN - 2015-10-30 09:47:04.827; [ ] org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
WARN - 2015-10-30 09:47:05.929; [ ] org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
WARN - 2015-10-30 09:47:06.030; [ ] org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
WARN - 2015-10-30 09:47:07.131; [ ] org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
WARN - 2015-10-30 09:47:07.232; [ ] org.apache.zookeeper.ClientCnxn$SendThread; Session 0x0 for server null, unexpected error, closing socket connection and attempting reconnect
java.net.ConnectException: Connection refused
at sun.nio.ch.SocketChannelImpl.checkConnect(Native Method)
at sun.nio.ch.SocketChannelImpl.finishConnect(SocketChannelImpl.java:744)
at org.apache.zookeeper.ClientCnxnSocketNIO.doTransport(ClientCnxnSocketNIO.java:361)
at org.apache.zookeeper.ClientCnxn$SendThread.run(ClientCnxn.java:1081)
Where I am missing ? gone through many docs but apche doc is not proper for external zookeper setup.
Your Zookeeper ensemble must have an impair number of nodes : 1, 3, 5, etc...
If you want to test ZK clustering feature than you have to set up at least 3 ZK instances. In this case, don't forget :
To set correctly the ZK server id in the file myid, that must be created in the directory dataDir, referenced by your zoo.cfg.
Separate the dataDir and dataLogDir for each ZK instance.
I'm having issues running an xDebug session when I've connected to the DBGp proxy successfully. I'm using both local and remote SSH tunnels for port 9000 (xdebug), and 9001 for a (xdebug DBGp client).
] The code is being debugged remotely, the xDebug server is running on an Amazon EC2 instance
] I am using Zend Studio for my local debugging client on my Macbook
] I am running a remote SSH tunnel for port 9000 "ssh ec2-user#X.X.X.X -R 9000/127.0.0.1/9000"
As of here, I'm able to successfully use xDebug, but then I run into issues running the proxy
But then I start running into issues running the proy:
] I then run the dbgp proxy on the remote server
./pydbgpproxy
INFO: dbgp.proxy: starting proxy listeners. appid: 20906
INFO: dbgp.proxy: dbgp listener on 127.0.0.1:9000
INFO: dbgp.proxy: IDE listener on 127.0.0.1:9001
] I then setup a local SSH tunnel for port 9001 - "ssh ec2-user#X.X.X.X -L 9001/127.0.0.1/9001"
] From Zend Studio I'm able to connect successfully to the DBGp server, where "SessionName" is the name of my session
INFO: dbgp.proxy: Server:onConnect ('127.0.0.1', 51828) [proxyinit -p 9000 -k SessionName -m 0]
] When I trigger a remote xdebug debugging sessions using my session name, it fails like so.
INFO: dbgp.proxy: connection from 127.0.0.1:39172 [<__main__.sessionProxy instance at 0x122e0e0>]
INFO: dbgp.proxy: connection from 127.0.0.1:39173 [<__main__.sessionProxy instance at 0x7f87980210e0>]
INFO: dbgp.proxy: connection from 127.0.0.1:39174 [<__main__.sessionProxy instance at 0x7f87980243b0>]
INFO: dbgp.proxy: connection from 127.0.0.1:39175 [<__main__.sessionProxy instance at 0x7f879814c878>]
INFO: dbgp.proxy: connection from 127.0.0.1:39176 [<__main__.sessionProxy instance at 0x7f87800a2368>]
INFO: dbgp.proxy: connection from 127.0.0.1:39177 [<__main__.sessionProxy instance at 0x123cb48>]
INFO: dbgp.proxy: connection from 127.0.0.1:39178 [<__main__.sessionProxy instance at 0x12387e8>]
INFO: dbgp.proxy: connection from 127.0.0.1:39179 [<__main__.sessionProxy instance at 0x122ec68>]
INFO: dbgp.proxy: connection from 127.0.0.1:39180 [<__main__.sessionProxy instance at 0x124fb48>]
INFO: dbgp.proxy: connection from 127.0.0.1:39181 [<__main__.sessionProxy instance at 0x7f8798047dd0>]
INFO: dbgp.proxy: connection from 127.0.0.1:39182 [<__main__.sessionProxy instance at 0x1244d88>]
ERROR: dbgp.proxy: Unable to connect to the server listener 127.0.0.1:9000 [<__main__.sessionProxy instance at 0x7f8790025878>]
Traceback (most recent call last):
File "./pydbgpproxy", line 222, in startServer
File "/usr/lib64/python2.6/socket.py", line 184, in __init__
error: [Errno 24] Too many open files
WARNING: dbgp.proxy: Unable to connect to server with key [SessionName], stopping request [<__main__.sessionProxy instance at 0x7f8790025878>]
WARNING: dbgp.proxy: Exception in _cmdloop [[Errno 104] Connection reset by peer]
INFO: dbgp.proxy: session stopped
It actually shows those lines like "INFO: dbgp.proxy: connection from 127.0.0.1:39179 [<main.sessionProxy instance at 0x122ec68>]" almost 50x more than what I copied and pasted here for brevity.
It seems like I got it to work but it's erring out. I'm currently using the pydbgpproxy phyton script, version 7 from: http://code.activestate.com/komodo/remotedebugging/. I tried the version 8 script but it just errors. I also tried the pydbgpprox, version 6, but it still has the same exact issue.
IN SUMMARY: xDebug is running on the server, I can connect to it normally without proxy. With the proxy I can connect to it successfully to, but then running a script it encounters this werid error.
Does anyone know what this issue might be caused from?