I'm trying to perform inner join and then left join in same sql query.
But the left join is not working. It is not showing the null values
I've two tables EVENT_INVITATIONS and USERINFO which has 2 records when joined.
so, the join query goes like this :
select * from [UandMePROD].[dbo].EVENT_INVITATIONS EI
join [UandMePROD].[dbo].USERINFO UI on EI.USER_ID = UI.USER_ID and EI.EVENT_ID=11033
It gives out 2 records.
So, I'm performing a left join with another table CLIENT_CONTACTS which has only 1 matching record in it.
So, actually it should show the null value to the unmatched record. but it is not showing the second record. It is showing only 1 record which is matched(join)
My failed sql query :
select * from [UandMePROD].[dbo].EVENT_INVITATIONS EI
join [UandMePROD].[dbo].USERINFO UI on EI.USER_ID = UI.USER_ID
left join CLIENT_CONTACTS CC on UI.MOBILENO=CC.MOBILE_NUMBER
where cc.CLIENT_ID=20111 and EI.EVENT_ID=11033
can you please tell me where I'm doing mistake?
I need the 2 records.
Since you are doing a left join, cc.CLIENT_ID is null for all the values which only exist in CLIENT_CONTACTS and your where clause Where cc.CLIENT_ID = 20111
converts your LEFT JOIN into INNER JOIN. Adding this filter in ON clause solves the issue.
select *
from [UandMePROD].[dbo].EVENT_INVITATIONS EI
inner join [UandMePROD].[dbo].USERINFO UI on EI.[USER_ID] = UI.[USER_ID]
left join CLIENT_CONTACTS CC on UI.MOBILENO = CC.MOBILE_NUMBER
and cc.CLIENT_ID = 20111
where EI.EVENT_ID=11033
You should not specify EI.EVENT_ID on WHERE clause. Those limit your results after the join. You should specify EI.EVENT_ID in an ON clause.
select * from [UandMePROD].[dbo].EVENT_INVITATIONS EI join [UandMePROD].[dbo].USERINFO UI on EI.USER_ID = UI.USER_ID AND (EI.EVENT_ID=11033 or EI.EVENT_ID is null) left join CLIENT_CONTACTS CC on UI.MOBILENO=CC.MOBILE_NUMBER where cc.CLIENT_ID=20111
Providing some suggestions,since it is not possible to say what is happening with out table data
Left join should show null values from output of first inner join eventhough there are no mobile number matches,so try removing where condition and see if you are getting any result
Related
This is a stored procedure to select the full details of a wine.
It takes as a parameter a storage location ID.
This builds properly and is similar in structure to many sp's I have written that work,
however it returns no data. Is there something I am missing?
CREATE PROCEDURE [sp_retrieveInventory_Full]
(
#StorageLocationID [int]
)
AS
BEGIN
SELECT [WineName],
[RackID],
[RackColumn],
[RackRow],
[WineTypeID],
[WineVarietyID],
[VintnerName],
[dbo].[Vintner].[Country],
[dbo].[Vintner].[StateProvince],
[dbo].[Vintner].[Region],
[VendorName],
[Vintage],
[PurchaseDate],
[PurchasePrice],
[BottleSizeID],
[ABV],
[DrinkByDate],
[FoodType],
[TastingNotes],
[RatedBy],
[RatingScore]
FROM [dbo].[StorageLocation]
INNER JOIN [dbo].[Wine]
ON [dbo].[StorageLocation].[WineID] = [dbo].[Wine].[WineID]
INNER JOIN [dbo].[Vintner]
ON [dbo].[Vintner].[VintnerID] = [dbo].[Wine].[VintnerID]
INNER JOIN [dbo].[Vendor]
ON [dbo].[Vendor].[VendorID] = [dbo].[Wine].[VendorID]
INNER JOIN [dbo].[Pairing]
ON [dbo].[Pairing].[PairingID] = [dbo].[Wine].[PairingID]
INNER JOIN [dbo].[Rating]
ON [dbo].[Rating].[RatingID] = [dbo].[Wine].[RatingID]
WHERE [dbo].[StorageLocation].[StorageLocationID] = #storageLocationID
END
GO
When a query reruns no result it's because no records exists that satisfy the conditions in it's where clause, or, in case of queries that contains inner joins, at least one of the joins on condition returns no records.
The easiest way to figure out what join is messing up your query is to start removing the joins one by one, but to do that, you have to first change the select clause.
What I like to do is this: Start with all the joins except the last one - see if it returns any records:
SELECT 1
FROM [dbo].[StorageLocation]
INNER JOIN [dbo].[Wine]
ON [dbo].[StorageLocation].[WineID] = [dbo].[Wine].[WineID]
INNER JOIN [dbo].[Vintner]
ON [dbo].[Vintner].[VintnerID] = [dbo].[Wine].[VintnerID]
INNER JOIN [dbo].[Vendor]
ON [dbo].[Vendor].[VendorID] = [dbo].[Wine].[VendorID]
INNER JOIN [dbo].[Pairing]
ON [dbo].[Pairing].[PairingID] = [dbo].[Wine].[PairingID]
-- INNER JOIN [dbo].[Rating]
-- ON [dbo].[Rating].[RatingID] = [dbo].[Wine].[RatingID]
WHERE [dbo].[StorageLocation].[StorageLocationID] = #storageLocationID
If not, comment out the next join and run the query again. Rinse and repeat.
Please note, however, that there might be more than one inner join that prevents the query from returning records.
We have many complex queries which involve a lot of columns and joins (see the example below) that are implemented as views.
In some cases these queries return duplicate rows which then have to be programmatically removed by the consuming app. Therefore, we would like to enhance the SQL query to eliminate the duplicates, and speed up the retrieval process.
I know that I can use OVER / PARTITION BY logic to do this, but I am not sure of how to modify the queries to obtain a working syntax.
Here is an example:
SELECT
Main.MfgOrder.OrderNumber,
Main.MfgOrder.DesignBOMID,
Main.Design_Plant.PlantID,
Main.MfgOrder_Operation.OrderOpID,
Main.MfgOrder_Operation.DesignOpID,
Main.MfgOrder_Operation.OpSeq,
Main.MfgOrder_Operation.Description,
Main.MfgOrder_Operation.CompletionStatus,
Main.MfgOrder__Shift.OrderShiftID,
Main.MfgOrder__Shift.WorkCenterMachineID,
Main.MfgOrder___Event.OrderEventID,
Main.MfgOrder____Reel.OrderReelID,
Main.MfgOrder____Reel.ReelNumber,
Main.MfgOrder____Reel.Location,
Main.MfgOrder____Reel.Test_Status AS Test_Status_Reel,
Main.MfgOrder____Reel.Test_Disposition AS Test_Disposition_Reel,
Main.MfgOrder____Reel.LabReleased,
Main.MfgOrder____Reel.ShipReelsBypassSet,
Main.MfgOrder_____Length.OrderLengthID,
Main.MfgOrder_____Length.LengthType,
Main.MfgOrder_____Length.LocationOnReel,
Main.MfgOrder_____Length.LocationOnLength,
Main.MfgOrder_____Length.TrialNumber,
Main.MfgOrder_____Length.SampleNumber,
Main.MfgOrder_____Length.PrintNumber,
Main.MfgOrder_____Length.Test_Status AS Test_Status_Length,
Main.MfgOrder_____Length.Test_Category,
Main.MfgOrder_____Length.Test_Disposition AS Test_Disposition_Length,
Main.MfgOrder_____Length.SampleSubmittedBy,
Main.MfgOrder_____Length.SampleSubmittedDate,
Main.MfgOrder_____Length.BypassTesting,
Main.MfgOrder_____Length_OperatorQty.Sample1Destination,
Main.MfgOrder_____Length_OperatorQty.Sample2Destination,
Main.MfgOrder_____Length_OperatorQty.Sample3Destination,
Main.MfgOrder______Component.OrderComponentID,
Main.MfgOrder______Component.DesignComponentID,
Main.MfgOrder______Component.ItemNo,
Main.MfgOrder_______Test.LabTestID,
Main.MfgOrder_______Test.OrderTestID,
Main.MfgOrder_______Test.TestComplete,
Main.MfgOrder_______Test.TestStatus,
Main.MfgOrder________Marker2.OrderMarkerID,
Master.Color.ColorName,
Master.LabTest.ExcludeFromPassFail,
CASE
WHEN Main.Design_Component.Component_Label IS NULL
THEN 'Unknown'
ELSE Main.Design_Component.Component_Label
END AS Component_Label
FROM
Main.MfgOrder
INNER JOIN
Main.Design__BOM ON Main.MfgOrder.DesignBOMID = Main.Design__BOM.DesignBOMID
INNER JOIN
Main.Design_Plant ON Main.Design__BOM.DesignPlantID = Main.Design_Plant.DesignPlantID
INNER JOIN
Main.MfgOrder_Operation ON Main.MfgOrder.OrderNumber = Main.MfgOrder_Operation.OrderNumber
INNER JOIN
Main.MfgOrder__Shift ON Main.MfgOrder_Operation.OrderOpID = Main.MfgOrder__Shift.OrderOpID
INNER JOIN
Main.MfgOrder___Event ON Main.MfgOrder__Shift.OrderShiftID = Main.MfgOrder___Event.OrderShiftID
INNER JOIN
Main.MfgOrder____Reel ON Main.MfgOrder___Event.OrderEventID = Main.MfgOrder____Reel.OrderEventID
INNER JOIN
Main.MfgOrder_____Length ON Main.MfgOrder____Reel.OrderReelID = Main.MfgOrder_____Length.OrderReelID
LEFT OUTER JOIN
Main.MfgOrder______Component ON Main.MfgOrder_____Length.OrderLengthID = Main.MfgOrder______Component.OrderLengthID
LEFT OUTER JOIN
Main.MfgOrder_______Test ON Main.MfgOrder______Component.OrderComponentID = Main.MfgOrder_______Test.OrderComponentID
LEFT OUTER JOIN
Main.MfgOrder________Marker2 ON Main.MfgOrder_______Test.OrderTestID = Main.MfgOrder________Marker2.OrderTestID
LEFT OUTER JOIN
Main.Design_Component ON Main.MfgOrder______Component.DesignComponentID = Main.Design_Component.DesignComponentID
LEFT OUTER JOIN
Master.Color ON Main.MfgOrder______Component.TapeColorID = Master.Color.ColorNumber
LEFT OUTER JOIN
Master.LabTest ON Main.MfgOrder_______Test.LabTestID = Master.LabTest.LabTestID
LEFT OUTER JOIN
Main.MfgOrder_____Length_OperatorQty ON Main.MfgOrder______Component.OrderLengthID = Main.MfgOrder_____Length_OperatorQty.OrderLengthID
you can use row_number as below: Below query will not select duplicate only on OrderNumber, if you need to add other columns you add accordingly
Select * from (
Select
RowN = Row_Number() over( partition by Main.MfgOrder.OrderNumber order by Main.MfgOrder.OrderNumber),
--- All your select columns and all your query with joins
) a
Where a.RowN = 1
Is the entire row duplicated exactly? If so then just add DISTINCT
SELECT DISTINCT
...
FROM
...
If you are getting duplicate rows where most columns the same but some columns are different then GROUP BY the columns that are the same and select MIN(column_name) for the ones that are causing the extra rows to appear.
I am new to MS SQL and am having trouble joining 4 tables within a query.
I am trying to join Orders, Order Lines, Client, and Picked tables to create a query to show quantity ordered and picked for a client. If I comment out the last inner join for Picked, I get the correct results. When I include the inner join for Picked the query returns results but data that should be in the Picked fields is NULL. One order line can have 1 or more Picked lines.
SELECT W_Warehouse, OH.OrderID, OH.RequiredDate, C.Client, OL.LineNbr, OL.QtyOrd, P.QtyPick
FROM Order
INNER JOIN Warehouse on Order.OH_WHS = Warehouse.W_PK
INNER JOIN Client on Order.O_Client = Client.C_PK
INNER JOIN OrderLine on Order.O_PK = OrderLine.OL_PK
INNER JOIN Picked on OrderLine.O_PK = Picked.P_PK
WHERE C.CLIENT = 'WENDYS'
Without knowing the data in the tables it is difficult to answer precisely.
But as you say you have 1+ rows in the Picked table, you probably want to do aggregation with GROUP BY and SUM()
Maybe this is what you're looking for:
SELECT
W.W_Warehouse,
OH.OrderID,
OH.RequiredDate,
C.Client,
OL.LineNbr,
OL.QtyOrd,
P.QtyPick
FROM
Order OH
INNER JOIN Warehouse W on OH.OH_WHS = W.W_PK
INNER JOIN Client C on OH.O_Client = C.C_PK
INNER JOIN OrderLine OL on OH.O_PK = OL.OL_PK
CROSS APPLY (
select sum(QtyPick) as QtyPick
from Picked P
where OL.O_PK = P.P_PK
) P
WHERE
C.CLIENT = 'WENDYS'
It calculates the sum of QtyPick separately so it doesn't increase the number of lines in the result.
I have a problem with running a T-SQL query to join 3 tables, dimStores, fctSales, dimDates.
I need to retain all rows from dimStores (list of selected stores) and dimDates (selection of dates) and matching details from fctSales. I can only join them via fctSales table that has keys for stores and dates.
I tried left outer join to get full list of selected Stores and then Right outer join to get all Dates but never was able to get both at the same time.
dimStores (StoreName)
fctSales (StoreName, DateKey)
dimDates (Date)
SELECT
st.StoreName
,sa.SaleItem
,dd.DateKey
From dimStores as st
Left outer join fctSales as sa on st.StoreName = sa.StoreName
right outer join dimDates as dd on dd.DateKey = sa.DateKey
WHERE dd.DateKey between 20150101 and 20150115
and sa.StoreName in ('Aka','Bink','Gil')
Please help
give it a try
with the left join with the fact you did in fact keep the Stores but with the right join on date, only the stores with data on that date would be considered
To keep all the stores on every possible date full outer join both to get all the combinations and only then join with the data.
SELECT
st.StoreName
,sa.SaleItem
,dd.DateKey
From dimStores as st
full outer join dimDates as dd on
1=1
Left outer join fctSales as sa on
st.StoreName = sa.StoreName and
dd.DateKey = sa.DateKey
WHERE
dd.DateKey between 20150101 and 20150115 and
sa.StoreName in ('Aka','Bink','Gil')
My query is not joining the three tables in SQL Server.
Code:
SELECT Ledger.ledger_id,
Ledger.std_reg_id,
Ledger.fee_of_month,
Ledger.ledger_date,
Ledger.fees,
Other_Fees.other_fees_id,
Other_Fees.title
FROM Ledger
INNER JOIN Other_Fees
ON Ledger.other_fees_id = Other_Fees.other_fees_id
INNER JOIN Std_Profile
ON Ledger.std_reg_id = Std_Profile.std_reg_id
An INNER JOIN will only return records that match in both tables. It's possible that between the 3 tables, there's no identically matching data. Try using a LEFT JOIN and see if it returns anything. By using a LEFT JOIN, you should at least get everything back from dbo.Ledger.
Also, you should probably alias your tables like such:
SELECT
L.ledger_id,
L.std_reg_id,
L.fee_of_month,
L.ledger_date,
L.fees,
F.other_fees_id,
F.title
FROM dbo.Ledger L
LEFT JOIN dbo.Other_Fees F
ON L.other_fees_id = F.other_fees_id
LEFT JOIN dbo.Std_Profile P
ON L.std_reg_id = P.std_reg_id