I have a stored procedure with 3 nested loops which works perfectly in Query Analyzer.
I need to create an SSRS report to output the data from the stored procedure.
The stored procedure uses several variables to hold calculated data for the output as it loops through the code.
How do I pull those variables onto my SSRS report? When I add the variables as parameters, SSRS errors with "parameter is missing a value". The value is derived from the stored procedure. I have not found a way to make this connection.
Its very annoying but you can only return one set of rows from a proc and for you to pass back anything it has to be in that table. So you will have to add columns to the passed back table which will contain the values you want on your report. I know this means that if you have a thousand rows these values will repeat 1 thousand times but that is the only way to return them.
Related
I have a SSRS report with 20 different datasets with some calculated columns in each.
I want to take few fields from all data sets including some calculated columns and insert them into a SQL table.
I want to do this for each month so that I can see the trends during a period. Is there any way to do that with out editing the data sets?
Can I refer the fields that I need by referring to Textbox4 and insert them into a SQL table? What is the easy way to do without touching data sets?
There is most likely alot better solution than using SSRS to update a SQL database. I am not proposing this as the best solution but rather a way to achieve what was asked.
You could create a dataset that runs a stored procedure you can pass the data as parameters to. The Sproc would do the insert into your chosen table and you can pass in the parameters from your original dataset however you see fit. You could even setup a second report with the Stored procedure Dataset that you can call on command by having an action event on an item to call the report. (I had a subreport embedded in a column of a tablix configured so it would only update with values from that row for instance).
To clarify:
Create a subreport that accepts the data you want to insert as a parameter for each column
Instead of adding a normal Dataset, have it call a stored procedure that inserts as you require
Add the subreport to your main report to be called once its run and configure the required parameters to be passed through.
There will be better, more efficient, cleaner ways to do this, but I found the above to work for my purposes since I was limited by time and resources. But I would still recommend you seek other solutions if possible.
I am currently working with a stored procedure that performs some background processes and then returns one of two results tables.
If it works ok I get a one column table that says success, if it doesn't then I get a four column table with various error data.
While this is fine if you just execute the code from .net, I now need to execute this from within another stored procedure. While I don't need the output, I do need the background processes to take place. I'd usually insert the output into a table, but can't in this case as the columns in the output varies dependent on the result, and as such cannot define a table that it can insert into.
Easiest answer would be to rewrite the outputs of the background SP to be consistent but this isn't an option. I've even tried wrapping this inside a UDF but the stored procedure can't be called from with a function.
Whatever solution I finally use it must work on versions from SQL Server 2008 R2 up to 2016.
Does anybody have any suggestions?
Many thanks,
Mat.
I would image you could create a SP that inserts the result of the inner SP into a temporary table using the hack below.
Insert results of a stored procedure into a temporary table
If that blocks the ouput then you can return no data.
I have a stored procedure which extracts data and dump into a temp table. I have created a ssrs report to extract data from the stored procedure. But I believe ssrs is not able to identify the temp table and retrieve data to the report because to test my report I dropped the stored procedure and re-created, but without executing the stored procedure I tried to run the report. But still it shows data. I want to know how ssrs identify the temp table and extract data to the report.
There may be two possibilities.
The first is that even though you dropped the Stored Procedures you don't say that you dropped the Temp table. Depending on if you used #Temp or ##Temp, the temporary table may persist.
The second possibility is that you are seeing the stored data from Visual Studio. If you check your RDL file location, there should be a .DATA file with the data that SSRS retrieves. Many times it will re-use this data if nothing has changed with parameters or query changes.
So, similar to "SQL Server compare results of two queries that should be identical", I need to compare the output of two stored procedures to ensure the new version is generating equivalent output to the old version. The tricky part is that my SP outputs six tables of differing widths.
I started writing a hybrid version of them that would compare each of the tables individually, but it's a pretty complex SP, so I was hoping there was an easier way.
I tried using EXCEPT as in the linked question, but it looks like that will only compare one table to one other table.
Easy option 1: Output the stored procedure results to a text file (one per procedure version) and use a diff tool/editor to make sure they are the same.
Easy option 2: Write the stored procedure results to a table/temp table (per return table per procedure) and write sql to compare the results. Just count the rows in each result table and then do a count of the union (not union all) of both tables. Repeat for each result table.
You can capture multiple result sets in .NET (C# or VB) quite easily. You can create a DataAdapter and DataSet, and use the DataAdapter.Fill() method to populate the DataSet. Each result set will be stored as a DataTable within that DataSet. Then you just need to loop through the DataTables collection in each DataSet and compare them. You can find more info on this MSDN page: Populating a DataSet from a DataAdapter
This can be done in either SQLCLR if you want to run it as a stored procedure or user-defined function, OR it can be a stand-alone console application. Running it as a SQLCLR stored procedure is quite convenient, but given that you will be stored all results for all 6 result sets, and for both stored procedures that you are testing, that might require too much memory. In that case, the console app is the the way to go.
The only thing I can think of is add an additional parameter to your both of (New/old) stored procedures to handle which result it should return like.
Exec usp_proc #var1 , #var2 , #ResultSet = 1
The above execution should return the first result set and if you pass #ResultSet = 2 it should return second result set and so on.....
do this with both stored procedure and then compare the result sets group by group (using except will do the trick).
I have a stored proc in sql-server and one of the parameters it returns is a string with the query parameters. I display those query parameters at the top of the report. That works great if something is found, not so great if nothing was found.
We have tried returning two query results, one the data set that I will make the report from (which includes the query parameters), the other the query parameter string. Crystal appears to only see the first data set, and this very old discussion (http://www.sqlteam.com/forums/topic.asp?TOPIC_ID=42462) says that is not something that will work. But that was over 5 years ago, and I'm hoping things have changed.
The problem, is if nothing is returned, the report is so blank that the person doesn't even know what query parameters they used. If they could see that they queried something that doesn't return any results, that would be useful.
So, if I have at the end of my stored proc:
SELECT * FROM [#ResultSet]
select #SearchCriteria as SearchCriteria
I'd like to be able to display the SearchCriteria even if there is nothing in the #ResultSet. Can it be done with this version of Crystal? Is there another way to do this?
Unless as stated by the first answer the results of one procedure have the same number of columns of another procedure (this includes type), if this is the case you can UNION the results or UNION ALL the results (if you want duplicates) to get ONE resultant set.
If the types or columns are not the same then you cannot do this. The only other option you can do is to merge all the relevant data into a temp table and then return the results from that temp table (SELECT * FROM #temp)
How are you currently able to display the parameters when results are found?
You haven't mentioned how you are using the Crystal Report in your environment.
Typically, I've done criteria display by passing the parameters to the Crystal Report as Report Parameters, and then using them in fields. This assumes you are calling it from a client application in some way.
Another option is to load the results into client datatables and binding to that as a datasource, it's certainly possible to handle the multiple result sets that way.