I am trying to use a Lookup task in SSIS. The source is a table in a SQL server, and the lookup table belongs to an Oracle Database.
until now I've got the next schema:
As you can see, I have not problems by wathching the preview of the lookup table, but when I try to execute the task I'm getting ONLY this error message:
[Lookup [2]] Error: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "OLEDB STBY" failed with error code 0xC0202009.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Until now I have no found a solution for this.
As a provider I am using the Native OLEDB\Microsoft OLE DB Provider for Oracle, but I have used the Oracle Provider for OLE DB with the same result.
Regards.
Finally I found the solution. After several tests I proved by changing the ProtectionLevel of the packet and the project and now I can FINALLY download data from my Oracle source.
Related
I am running an SSIS package that uses OLEDB connections to fetch data from and Oracle 10.2.0.5.0 database and insert it into an SQLServer 2012 (11.0.6260)
I get the following error.
Time: 2021-02-05 01:13:55 AM
Task: Data Flow Task
Error Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
followed by
Time: 2021-02-05 01:13:55 AM
Task: Data Flow Task
Error Description: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC0202009. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
There are no keys or constraints on the destination table.
Both of the dataflow tasks have CommandTimeout set to 0.
All of the other packages with the same source and destination databases run without any problem.
Edit 2
This particular package runs fine on our test/development environment.
I have sinced run the package several times and noticed that the source query returns about 4500 records but only about 500 are inserted into the destination database.
End Edit 2
Is there anything else that I can check for?
Edit 1
The Error message is as it appears in service manager.
The log files just before the error are below.
The source Query is quite along running query. It takes approximately 9 minutes.
End Edit 1
Logging into the oracle database directly with the user that is used for our integrations and running the query gave the following error.
After increasing the size of the user profile the query returned data and the integrations ran correctly.
I have a package that connects to two different DBs, does some calculations, and then inserts values into each DB. The package worked great in our old env, but migrating it over to the new one has proven pretty unpleasant. We had to switch from Windows Auth to SQL Auth and the Connection Manager test works fine, but I'm getting the following error when attempting to execute my SSIS package from Visual Studio:
SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER.
The AcquireConnection method call to the connection manager "DB1"
failed with error code 0xC0202009. There may be error messages posted
before this with more information on why the AcquireConnection method
call failed.
[SSIS.Pipeline] Error: OLE DB Source failed the pre-execute phase and returned error code 0xC020801C.
What has me really puzzled is the failing task isn't even the first time that connection is used in the package. Just before reaching that Dataflow task, an Execute SQL Task fires against the same connection and is successful. I can also go into the task itself and hit "Preview" and it returns data.
Does anyone have any ideas where else to look?
I've tried:
setting to 32bit Execution
deleting and recreating the task
delay validation = true
Closed. This question needs debugging details. It is not currently accepting answers.
Edit the question to include desired behavior, a specific problem or error, and the shortest code necessary to reproduce the problem. This will help others answer the question.
Closed 5 years ago.
Improve this question
For the past week I've been working on creating a package in SSIS that will extract, transform, and then load data from an Access database into a SQL Server database. Initially I created two separate packages to handle migrating bits of data from the same table in Access, transforming it, and then loading it into two different tables in SQL Server. Those worked on their own separately, but now I am trying to fold them into one package.
From what I've investigated, this is more than feasible (having a package with one data flow with two sources and destinations) but for some reason I can't get it to work. Looking into the error codes I got, people suggested using data conversion, but I previously had errors thrown at me regarding data types that I have solved using data conversion.
The errors that SSIS throws at me when I run the package are as follows:
Error: 0xC0202009 at Data Flow Task, InfoTable [52]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80004005 Description: "Unspecified error".
Error: 0xC020901C at Data Flow Task, InfoTable [52]: There was an error with InfoTable.Inputs[OLE DB Destination Input].Columns[Copy of Parameter] on InfoTable.Inputs[OLE DB Destination Input]. The column status returned was: "The value violated the integrity constraints for the column.".
Error: 0xC0209029 at Data Flow Task, InfoTable [52]: SSIS Error Code DTS_E_INDUCEDTRANSFORMFAILUREONERROR. The "InfoTable.Inputs[OLE DB Destination Input]" failed because error code 0xC020907D occurred, and the error row disposition on "InfoTable.Inputs[OLE DB Destination Input]" specifies failure on error. An error occurred on the specified object of the specified component. There may be error messages posted before this with more information about the failure.
Error: 0xC0047022 at Data Flow Task, SSIS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "InfoTable" (52) failed with error code 0xC0209029 while processing input "OLE DB Destination Input" (65). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
Thank you in advance for any help that can be given!
I was able to figure it out; it was due to the data I was trying to load that contained some null values. Normally this would be fine, but my SQL Server database (specifically the table that the data is being loaded into) is setup to not allow Nulls. I believe this is what was causing the issue even with the "allow nulls" on the OLE DB Destination > table or view - fast load checked.
The solution seems to be either fixing the SQL Server table to accept Nulls or not trying to load nulls into the table. I did the latter and everything worked ok (didn't even need a data conversion).
I can't say for sure without seeing everything in detail, but based on the error and your description of the problem, I suspect you have a foreign key relationship and some of that data is being loaded before the primary key gets loaded. If so, look at adding a precedence constraint to load the first table followed by the second using two separate data flows in the same package.
I am trying to take a table from a SQL Server database and place it into an excel document. It is a simple Source SQL Server to Destination of an Excel 97-2003 document. When I try to run this task though, I get the following error. I don't have Excel open and cannot seem to figure out why this is stopping me from doing this. I am on a 64-Bit Windows 7 computer.
Error: 0xC020801C at Data Flow Task 1, Excel Destination [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task 1, SSIS.Pipeline: Excel Destination failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task 1, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task 1: There were errors during task validation.
You need to change the property
1)Right Click on the first Folder on Solution Explorer
2)Click on Properties and go Config. Debugging Prop. and set 'run64bitRuntime' to False
Visit this site if there is a confusion.
** https://imgalib.wordpress.com/2013/01/24/how-to-solve-ssis-error-code-0xc020801c0xc004700c0xc0047017/
I'm trying to use a foreach loop container to import several excel files into a table, I specified the folder and the files I'm going to use (*.xls), after that I created a path variable then I went to the excel source connection and in the "Expression" property I selected the variable. I created the foreach container but, the excel source's connectionString only shows Provider=Microsoft.Jet.OLEDB.4.0;, so it means it's not taking the variable value. What can I do to solve that?
Note: I'm using SQL Server 2012
ADDITIONAL INFORMATION:
Error at Data Flow Task [Excel Source [20]]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error at Data Flow Task [SSIS.Pipeline]: Excel Source failed validation and returned error code 0xC020801C.
Error at Data Flow Task [SSIS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
Error at Package [Connection manager "Excel Connection Manager"]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D.
(Microsoft.DataTransformationServices.VsIntegration)
Check the link below where I answer mainly focus on RUN64BITS TO FALSE instead of TRUE.
Execel Source ERROR
Running a SQL 2012 SSIS Package via an MVC Website fails with:
The Script Task is corrupted.
and
There were errors during task validation.
Runs perfectly from with in BIDS.
To resolve it I set the Project Property:
Run64BitRunTime = False
Security = DontSaveSensitive
In the Package I set:
DelayValidation = True
Security = DontSaveSensitive
This still failed. I came across this which indicates that Script Tasks are the problem.
So I removed the script task and it worked straight away.