I have these tables:
Table A(Column1a, Column2a, Column3a);
Table B(Column1b);
Column1b values can be 0,1,2,3,4 or 5.
I want to count the number of 0,1,2,3 values in Column1b then store it in Column1a.
Column2a value will be the count of Column1b where the value is 1.
Column3a value will be the count of Column1b where the value is 2 or 3.
Thanks in advance guys!
INSERT INTO table_a (Column1a, Column2a, Column3a)
SELECT SUM(CASE WHEN Column1b IN (0,1,2,3) THEN 1 ELSE 0 END),
SUM(CASE WHEN Column1b = 1 THEN 1 ELSE 0 END),
SUM(CASE WHEN Column1b IN (2,3) THEN 1 ELSE 0 END)
FROM table_b
Related
Select p.pnum,
SUM(CASE WHEN P.NegativeScreen = 'Type99' THEN 1 ELSE 0 END) TotalDetected,
SUM(IIF(P.IsPositive = 1, 1,0)) TotalP,
SUM(CASE WHEN (P.MethId NOT IN (4, 8, 10, 25) THEN 1 ELSE 0 END) Total,
SUM(CASE WHEN (P.MethID IN (34,64) ) THEN 1 ELSE 0 END) TotalVal1,
SUM(CASE WHEN (P.MethID IN (16,64) ) THEN 1 ELSE 0 END) TotalVal2,
SUM(CASE WHEN (P.MethID IN (2,4,6,11,13,14,15,18,21,22,24,28,30,31) OR (P.MethID
= 1 AND P.TotalCount IS NOT NULL)) THEN 1 ELSE 0 END) TotalMethOther,
FROM tbl_plt p
GROUP BY P.PNum
Notice that the above query has all the fields from the tbl_plt table and SUM() is done on the fields.
Notice where I have MethID mentioned above. I need to check if those MethID exist in the tbl_plt table and if they exist in another table called TblOther. If so, tally it up accordingly.
Here is the fields in TblOther Table. Note that in TblOther table, we can have multiple PNums but the MethID will be different. Also note that for not all pNums will have entries in the TblOther table.
ID PNum MethID
1 232 32
2 232 64
3 232 10
4 104 14
5 104 54
6 22 4
7 4 13
I tried with LEFT JOIN with TblOther table but things gets messy as with the left join, it also tallies up incorrectly for places like:
SUM(CASE WHEN P.NegativeScreen = 'Type99' THEN 1 ELSE 0 END) TotalDetected,
SUM(IIF(P.IsPositive = 1, 1,0)) TotalP,
As an example for where I have:
SUM(CASE WHEN (P.MethID IN (34,64) ) THEN 1 ELSE 0 END)
it needs get the count of how many MethID exist in both the tblOther and tbl_plt for where MethID is 34 or 64 for the associated PNum.
It needs to do similarly for other places where MethID is mentioned.
I don't know enough about TblOther or it's join, but I suspect you might need to do the same group by (i.e., PNum) on it before joining on PNum. Then the left join will match either 0 or 1 records. Be sure to account for the null if there is no match.
You could start by getting the list of distinct PNum and MethIDs to use and then do your summing based on that list:
;WITH entries as (
SELECT DISTINCT PNum, MethID
FROM tblOther)
SELECT *
FROM entries
INNER JOIN tbl_plt
ON entries.PNum = tbl_plt.PNum
AND entries.MethID = tbl_plt.MethID
GROUP BY entries.PNum
I need some help with my query...I am trying to get a count of names in each house, all the col#'s are names.
Query:
SELECT
House#,
COUNT(CASE WHEN col#1 IS NOT NULL THEN 1 ELSE 0 END) +
COUNT(CASE WHEN col#2 IS NOT NULL THEN 1 ELSE 0 END) +
COUNT(CASE WHEN col#3 IS NOT NULL THEN 1 ELSE 0 END) AS count
FROM
myDB
WHERE
House# IN (house#1, house#2, house#3)
GROUP BY
House#
Desired results:
house 1 - the count is 3
house 2 - the count is 2
house 3 - the count is 1
...with my current query the results for count would be just 3's
COUNT by design doesn't count NULL values.
SELECT House#,
COUNT(col1#) + COUNT(col2#) + COUNT(col3#) AS count
FROM myDB
WHERE House# IN (house#1,house#2,house#3)
GROUP BY House#;
I have data for my Student in my lookupdata table (Enrolled, Droped Out, Canclled, all with ldTypeID = 129). The rest of my data is stored in vStudent. I need to write proc which will give me a report of all my Student, the Male and Female but per different Country. Where did I go wrong with my code?
Student Status Total Number Total # Males Total # Females
Enrolled
Dropped Out
Cancelled
Graduated
CREATE PROCEDURE [dbo].[pr_ReportPerCountry]
#CountryID int
AS
DELETE FROM ReportData WHERE rdTypeID = 2
INSERT INTO ReportData
(
rdSortBy,
rdTypeID,
rdName1,
rdValue1,
rdValue2,
rdValue3,
)
Select
0 AS SoryBy,
2 AS rdTypeID,
finalStudentStatus,
sum (case when peFinalStatusID in (303) then 1 else 0 end) as TotalEnrolled,
sum(case when (peFinalStatusID in (303) and peSexID=7) then 1 else 0 end) as MaleEnrolled,
sum(case when (peFinalStatusID in (303) and peSexID=8) then 1 else 0 end) as FemaleEnrolled
from vStudentPerson
left join (SELECT ldLookupDataID,ldValue FROM LookupData
WHERE ldTypeID = 129
group by ldLookupDataID,ldValue
) sta on peFinalStatusID=sta.ldLookupDataID
WHERE peFinalStatusID in (297,298,299,303) and peCountryofResidencyID = 0 or peCountryofResidencyID=#CountryID
I find solution, thanks anyway.
INSERT INTO ReportData
(
rdSortBy,
rdTypeID,
rdName1,
rdValue1,
rdValue2,
rdValue3
)
Select
0 AS SoryBy,
1 AS rdTypeID,
academicYear,
count (pePersonID) as TotalAwarded,
sum (case when peSexID = 7 then 1 else 0 end ) as TotalAwardedMale,
sum (case when peSexID = 8 then 1 else 0 end ) as TotalAwardedFemale
from vStudentPerson
left join (SELECT * FROM vStudentPersonScholarship) sch on pePersonID=sch.psPersonID
where (#CountryID = -1 or peCountryofResidencyID = #CountryID) and psScholarahipRenewalsTypeID=281
group by sch.academicYear
Here is the Table :
If OBJECT_ID ('tempdb..##SelfCount') Is not null
drop table #SelfCount
create table #SelfCount (CanID int , CanType int)
insert into #SelfCount (CanID, CanType)
values
(1,0),
(2,0),
(1,1),
(2,1),
(1,2),
(1,2),
(1,0)
CanID CanType
1 0
2 0
1 1
2 1
1 2
1 2
1 0
I'm Expecting the result to be like this
CanID Self Spouse Dependent
1 2 1 2
2 1 1 0/NULL --It doesn't matter if it's nUll or 0
I wrote this query
select CanID,
case
When CanType = 0 then count(CanType)
end as [self],
case
when CanType = 1 then count(CanType)
end as [Spouse],
Case
When CanType = 2 then count(CanType)
end as [Dependent]
from #SelfCount
Group by CanID, CanType
But the Result Set is like this :
CanID Self Spouse Dependent
1 2 NULL NULL
2 1 NULL NULL
1 NULL 1 NULL
2 NULL 1 NULL
1 NULL NULL 2
I've tried the Recursive method, If anyone could provide both Recursive as well as Set processing method, it'll be greatly appreciated.
By including the CanType in the group by clause, you're getting a separate result row per distinct value of CanType (and CanId, since it's also contained in the group by clause).
Instead, you should only have CanId in the group by clause, and apply different counts on case expressions:
SELECT CanID,
COUNT (CASE CanType WHEN 0 THEN 1 END) AS [Self],
COUNT (CASE CanType WHEN 1 THEN 1 END) AS [Spouse],
COUNT (CASE CanType WHEN 2 THEN 1 END) AS [Dependent],
FROM #SelfCount
GROUP BY CanID
May be this is what you need:
select CanID,
sum(case when CanType = 0 then 1 else 0 end) as [Self],
sum(case when CanType = 1 then 1 else 0 end) as [Spouse],
sum(case when CanType = 2 then 1 else 0 end) as [Dependent]
from #SelfCount
group by CanID
You can try with PIVOT:
select
CanID,
[0] as Self,
[1] as Spouse,
[2] as Dependent
from tab
pivot
(
count (CanType)
for CanType IN ([0], [1], [2])
) as pvt
Basically, it will group by all columns not declared inside the PIVOT clause (actually, just the CanID) and then create three aggregation COUNT columns, one FOR each CanType IN the list of values. If you need to count more values, just define them in the IN clause and in the SELECT clause.
SELECT Column_A, SUM(CASE WHEN COLUMN_B = 'x' THEN 1 ELSE 'SET SUM TO 0' END) as total
FROM table
GROUP BY Column_A
ORDER BY Month
Is there a way to set the value of sum to 0 , I am trying to find the sum of last consecutive x value for cloumn_B if the consecution breaks I need to set the sum to 0
Table
ColumnA Column B Month
A x 1
A x 2
A x 3
A y 4
B x 1
B y 2
B x 3
B x 4
C x 1
C x 2
C y 3
C x 4
The expected result is:
A 0
B 2
C 1
EDIT:
DECLARE #TEMP TABLE (columnA varchar(50), maxMonth int )
INSERT INTO #TEMP (columnA, maxMonth)
SELECT columnA, MAX([Month]) FROM [table]
WHERE columnB != 'x'
GROUP BY columnA
SELECT original.columnA, SUM(CASE when original.[Month] > withMax.maxMonth THEN 1 ELSE 0 END) AS TOTAL
FROM #TEMP withMax JOIN [table] original ON withMax.columnA = original.columnA
WHERE original.columnB = 'x'
GROUP BY original.columnA
This query should work for you.
Just try this
SELECT Column_A, SUM(CASE WHEN COLUMN_B = 'x' THEN 1 ELSE 0 END) as total
FROM table
GROUP BY Column_A
ORDER BY some_date
SUM cannot be used for non-numeric data types
If you use, you will get error
Operand data type char is invalid for sum operator.
SELECT Column_A, ISNULL(CAST(SUM(CASE WHEN COLUMN_B = 'x' THEN 1 END) AS VARCHAR),'SET SUM TO 0') AS total
FROM table
GROUP BY Column_A
ORDER BY some_date