Is it possible to define a char with a variable length?
I have a char "name" (member of a struct named "person") with a length of 25 but I want it to be a variable length between the values 1 and 25, because I want to generate random strings of that char with different sizes and not always with the same length (25). One of the parameters of the method is sizeof(n.name).
Note: n is a struct (struct person n).
The struct "person" is defined this way:
struct person{
int c;
char name[25];
};
Anyone?
struct person{
int c;
char name[]; /* Variable length array */
};
I think this should serve your purpose.
Else you can have dynamic memory allocation using
char *name;
name is a pointer and memory should be allocated and it can be done using malloc()
You can use a flexible array. It must be the last data member of a structure.
struct person{
int c;
char name[];
};
The memory for a structure with a flexible array has to be allocated dynamically.
From the C Standard (6.7.2.1 Structure and union specifiers)
the flexible array member is ignored. In particular, the size of the
structure is as if the flexible array member were omitted except that
it may have more trailing padding than the omission would imply. Howev
er, when a . (or ->) operator has a left operand that is (a pointer
to) a structure with a flexible array member and the right operand
names that member, it behaves as if that member were replaced with the
longest array (with the same element type) that would not make the
structure larger than the object being accessed; the offset of the
array shall remain that of the flexible array member, even if this
would differ from that of the replacement array. If this array would
have no elements, it behaves as if it had one element but the behavior
is undefined if any attempt is made to access that element or to
generate a pointer one past it.
And there is an example of its using
20 EXAMPLE 2 After the declaration:
struct s { int n; double d[]; };
the structure struct s has a flexible array member d. A typical way to use this is:
int m = /* some value */;
struct s *p = malloc(sizeof (struct s) + sizeof (double [m]));
and assuming that the call to malloc succeeds, the object pointed to by p behaves, for most purposes, as if
p had been declared as:
struct { int n; double d[m]; } *p;
(there are circumstances in which this equivalence is broken; in particular, the offsets of member d might
not be the same).
Or you could declare a pointer to char and dynamically allocate only the array itself
struct person{
int c;
char *name;
};
char[25] lets you store C strings of length between zero and 24, inclusive (one character is needed for '\0' terminator).
You can use one of two solutions:
Use a flexible array member, or
Use a pointer.
The first solution lets you keep the name together with the rest of the struct, but you would not be able to make arrays of these structs:
struct person{
int c;
char name[];
};
See this Q&A for more information on flexible array members. You need a compiler compatible with C99 to use flexible array members.
The second solution takes slightly more memory, but the size of your struct does not change, making it possible to use it in an array:
struct person{
int c;
char *name;
};
A better way to do this is to use the strings library and declare the variable 'name' of type string.
#include<string>
struct person{
int c;
string name;
};
Related
I have a task to do and the content of the task is:
Please suggest a definition of linked list, which will keep the person's name and age in a flexible structure. Then write the procedure for inserting elements with the given name and age.
What exactly is a flexible structure? How to define it? And then how to malloc the size?
typedef struct Test {
int age; // ?
char name[?]; // ?
struct Test * next;
}Structure;
int main(void) {
Structure *one = malloc(???);
}
You are on the right track. However, there is no "flexible structure". You want to use a flexible array member (avail since C99) in a struct:
typedef struct {
int age;
size_t name_size; // size of the array, not length of the name!
char name[]; // Flexible array member
} Structure;
int main(void) {
Structure *one = malloc(sizeof(*one) + SIZE_OF_NAME_ARRAY);
}
Note I added a name_size field. C does not store the size of allocated arrays, so you might need this for safe copy/compare, etc. (prevent buffer overflows).
Using *one makes this term independent of the actual type used. The size of such a struct is as if the arrray had zero elements. However, it will be properly aligned, so it can differ from the same struct without the array.
Also note that you have to change the allocated size if you use other than a char array to something like sizeof(element_type) * ARRAY_SIZE. This is not necessary for chars, as their size is defined by the standard to be 1.
my guess: a flexible struct would be one that could handle any age and any name.
A unsigned int field would handle any age (within reason).
A char * field would handle any name.
The struct itself would be:
struct nameAge { unsigned int age; char * pName; };
an instance of the struct would be:
struct nameAge myNameAge;
Setting the age field would be:
myNameAge.age = ageValue;
Setting the name field would be:
myNameAge.name = malloc( numCharactersInName+1 );
strcpy( myNameAge.name, nameString );
How the code obtained the ageValue for age and/or the characters for NameString is up to the programmer to decide/implement.
I have looked around but have been unable to find a solution to what must be a well asked question.
Here is the code I have:
#include <stdlib.h>
struct my_struct {
int n;
char s[]
};
int main()
{
struct my_struct ms;
ms.s = malloc(sizeof(char*)*50);
}
and here is the error gcc gives me:
error: invalid use of flexible array member
I can get it to compile if i declare the declaration of s inside the struct to be
char* s
and this is probably a superior implementation (pointer arithmetic is faster than arrays, yes?)
but I thought in c a declaration of
char s[]
is the same as
char* s
The way you have it written now , used to be called the "struct hack", until C99 blessed it as a "flexible array member". The reason you're getting an error (probably anyway) is that it needs to be followed by a semicolon:
#include <stdlib.h>
struct my_struct {
int n;
char s[];
};
When you allocate space for this, you want to allocate the size of the struct plus the amount of space you want for the array:
struct my_struct *s = malloc(sizeof(struct my_struct) + 50);
In this case, the flexible array member is an array of char, and sizeof(char)==1, so you don't need to multiply by its size, but just like any other malloc you'd need to if it was an array of some other type:
struct dyn_array {
int size;
int data[];
};
struct dyn_array* my_array = malloc(sizeof(struct dyn_array) + 100 * sizeof(int));
Edit: This gives a different result from changing the member to a pointer. In that case, you (normally) need two separate allocations, one for the struct itself, and one for the "extra" data to be pointed to by the pointer. Using a flexible array member you can allocate all the data in a single block.
You need to decide what it is you are trying to do first.
If you want to have a struct with a pointer to an [independent] array inside, you have to declare it as
struct my_struct {
int n;
char *s;
};
In this case you can create the actual struct object in any way you please (like an automatic variable, for example)
struct my_struct ms;
and then allocate the memory for the array independently
ms.s = malloc(50 * sizeof *ms.s);
In fact, there's no general need to allocate the array memory dynamically
struct my_struct ms;
char s[50];
ms.s = s;
It all depends on what kind of lifetime you need from these objects. If your struct is automatic, then in most cases the array would also be automatic. If the struct object owns the array memory, there's simply no point in doing otherwise. If the struct itself is dynamic, then the array should also normally be dynamic.
Note that in this case you have two independent memory blocks: the struct and the array.
A completely different approach would be to use the "struct hack" idiom. In this case the array becomes an integral part of the struct. Both reside in a single block of memory. In C99 the struct would be declared as
struct my_struct {
int n;
char s[];
};
and to create an object you'd have to allocate the whole thing dynamically
struct my_struct *ms = malloc(sizeof *ms + 50 * sizeof *ms->s);
The size of memory block in this case is calculated to accommodate the struct members and the trailing array of run-time size.
Note that in this case you have no option to create such struct objects as static or automatic objects. Structs with flexible array members at the end can only be allocated dynamically in C.
Your assumption about pointer aritmetics being faster then arrays is absolutely incorrect. Arrays work through pointer arithmetics by definition, so they are basically the same. Moreover, a genuine array (not decayed to a pointer) is generally a bit faster than a pointer object. Pointer value has to be read from memory, while the array's location in memory is "known" (or "calculated") from the array object itself.
The use of an array of unspecified size is only allowed at the end of a structure, and only works in some compilers. It is a non-standard compiler extension. (Although I think I remember C++0x will be allowing this.)
The array will not be a separate allocation for from the structure though. So you need to allocate all of my_struct, not just the array part.
What I do is simply give the array a small but non-zero size. Usually 4 for character arrays and 2 for wchar_t arrays to preserve 32 bit alignment.
Then you can take the declared size of the array into account, when you do the allocating. I often don't on the theory that the slop is smaller than the granularity that the heap manager works in in any case.
Also, I think you should not be using sizeof(char*) in your allocation.
This is what I would do.
struct my_struct {
int nAllocated;
char s[4]; // waste 32 bits to guarantee alignment and room for a null-terminator
};
int main()
{
struct my_struct * pms;
int cb = sizeof(*pms) + sizeof(pms->s[0])*50;
pms = (struct my_struct*) malloc(cb);
pms->nAllocated = (cb - sizoef(*pms) + sizeof(pms->s)) / sizeof(pms->s[0]);
}
I suspect the compiler doesn't know how much space it will need to allocate for s[], should you choose to declare an automatic variable with it.
I concur with what Ben said, declare your struct
struct my_struct {
int n;
char s[1];
};
Also, to clarify his comment about storage, declaring char *s won't put the struct on the stack (since it is dynamically allocated) and allocate s in the heap, what it will do is interpret the first sizeof(char *) bytes of your array as a pointer, so you won't be operating on the data you think you are, and probably will be fatal.
It is vital to remember that although the operations on pointers and arrays may be implemented the same way, they are not the same thing.
Arrays will resolve to pointers, and here you must define s as char *s. The struct basically is a container, and must (IIRC) be fixed size, so having a dynamically sized array inside of it simply isn't possible. Since you're mallocing the memory anyway, this shouldn't make any difference in what you're after.
Basically you're saying, s will indicate a memory location. Note that you can still access this later using notation like s[0].
pointer arithmetic is faster than arrays, yes?
Not at all - they're actually the same. arrays translate to pointer arithmetics at compile-time.
char test[100];
test[40] = 12;
// translates to: (test now indicates the starting address of the array)
*(test+40) = 12;
Working code of storing array inside a structure in a c, and how to store value in the array elements Please leave comment if you have any doubts, i will clarify at my best
Structure Define:
struct process{
int process_id;
int tau;
double alpha;
int* process_time;
};
Memory Allocation for process structure:
struct process* process_mem_aloc = (struct process*) malloc(temp_number_of_process * sizeof(struct process));
Looping through multiple process and for each process updating process_time dyanamic array
int process_count = 0;
int tick_count = 0;
while(process_count < number_of_process){
//Memory allocation for each array of the process, will be containting size equal to number_of_ticks: can hold any value
(process_mem_aloc + process_count)->process_time = (int*) malloc(number_of_ticks* sizeof(int));
reading data from line by line from a file, storing into process_time array and then printing it from the stored value, next while loop is inside the process while loop
while(tick_count < number_of_ticks){
fgets(line, LINE_LENGTH, file);
*((process_mem_aloc + process_count)->process_time + tick_count) = convertToInteger(line);;
printf("tick_count : %d , number_of_ticks %d\n",tick_count,*((process_mem_aloc + process_count)->process_time + tick_count));
tick_count++;
}
tick_count = 0;
the code generated will be identical (array and ptr). Apart from the fact that the array one wont compile that is
and BTW - do it c++ and use vector
I have this struct:
typedef struct SomeStruct {
char someString[];
} SomeStruct;
This produces an error since someString's size is not defined when initialized.
I want to make someString an array of strings, but I will not know the size of the array at the time of initialization. (The elements that will be in the array will depend on user input later in the program).
Is it possible to initialize this as an array of strings without knowing the size of the array?
Yes, the C standard talks about this in 7.2.18-26. What you are describing is known as a flexible array member of a struct. From the standard:
As a special case, the last element of a structure with more than one named member may have an incomplete array type; this is called a flexible array member.
Essentially what it is saying is, if the last member of the struct is an array of undefined size (as might be the case for runtime sizes), then when using the struct, you would allocate the appropriate size of your struct including how large you want the string to be. For example:
typedef struct SomeStruct {
char someString[];
} SomeStruct;
has the flexible array member someString. A common way to use this is:
SomeStruct *p = malloc(sizeof (SomeStruct) + str_size);
Assuming that the call to malloc succeeds, the object pointed to by p behaves, for most purposes, as if p had been declared as:
struct {char someString[str_size]; } *p;
Read the standard for more detail. The buzzword flexible array member will show up a lot of information too. The wikipedia is a good place to start.
You can use a structure with flexible array. For example
typedef struct SomeStruct
{
size_t n;
char someString[];
} SomeStruct;
where n is used to store the number of elements in the array.
Then you can create objects of the structure the following way
SomeStruct *s = malloc( sizeof( SomeStruct ) + 10 * sizeof( char[100] ) );
s->n = 10;
If you can't use a dynamic array (it sounds like this, if you get a compile error for it), you can actually overrun the array, as long as it's at the end of the struct, and as long as you can actually access that memory. Example:
#include <stdio.h>
#include <stdlib.h>
typedef struct SomeStruct {
char someString[10];
} SomeStruct;
int main (void)
{
// Allocate 4x space, so we have room to overrun
SomeStruct *p = malloc(sizeof(SomeStruct) * 4);
p->someString[38] = 'a';
printf("%c\n", p->someString[38]);
}
Of course, you still have to actually allocate the space, so it may not be so useful to you depending on your case.
I want to declare a int num in struct S. Then the same struct should also have a array B of size num(So B will access num from it's own struct).
while in a function, I can do,
func(int A)
{
int max=A; //I could use A directly, I am just trying to explain my plan.
int B[max];
}
same won't work for struct as such,
struct S {
int num;
int data[num]; //this is wrong, num is undeclared
};
Is there any way I can do this?
Use a flexible array member:
struct S {
int num;
int data[];
};
int x = 42;
struct S *p = malloc(sizeof (struct S) + sizeof (int [x]));
p->num = x;
There are several problems with
struct S {
int num;
int data[num];
};
that cause it to not work the way you want to.
The first is that the num being used in the array member declaration isn't the same num that's the member of the struct type; the compiler treats the num in the array declaration as a regular identifier (i.e., it assumes there's a different variable named num in the same scope as the struct declaration)1.
The second problem is that a struct or union type may not have a variable-length array as a member2. However, the last member in the struct may have an incomplete array type:
struct S {
int num;
int data[];
};
Unfortunately, you're still kind of stuck here; if you create an instance of struct S like
struct S foo;
it doesn't actually allocate any space for the array. You'd need to allocate the struct dynamically:
/**
* Note that sizeof doesn't try to actually dereference foo below
*/
struct S *foo = malloc( sizeof *foo + N * sizeof *foo->arr );
to allocate space for the array itself. Note that you cannot declare an array of struct S or use it as a member of another structure or union type if the last member has an incomplete array type. 3
Honestly, your best option is to define the struct as
struct S {
size_t num;
int *data;
};
and then allocate the memory for data as a separate operation from allocating memory for the struct object itself:
struct S foo;
foo.num = some_value();
foo.data = malloc( sizeof *foo.data * foo.num );
Since struct S now has a known size, you can declare arrays of it, and you can use it as a member of another struct or union type:
struct S blah[10];
struct T {
struct S s;
...
};
1. C supports four different name spaces - label names (disambiguated by label syntax), struct/union/enum tag names (disambiguated by the presence of the struct, union, or enum keyword), struct and union member names (disambiguated by the . and -> component selection operators), and everything else. Since the num in your array declaration is not an operand of . or ->, the compiler treats it as a regular variable name.
2. 6.7.2.1/9: "A member of a structure or union may have any complete object type other than a variably modified type."
2. 6.2.7.1/3: A structure or union shall not contain a member with incomplete or function type (hence,
a structure shall not contain an instance of itself, but may contain a pointer to an instance
of itself), except that the last member of a structure with more than one named member
may have incomplete array type; such a structure (and any union containing, possibly
recursively, a member that is such a structure) shall not be a member of a structure or an
element of an array.
First of all, the member num is not declared until the end of the struct definition, which ends at the last }.
Second, how would it make sense to set the array size to be the value of an uninitialized variable?
What I think you attempt to do with int B[max] is to create a variable length array (VLA). But that won't work either, as they are explicitly forbidden inside structs. 6.7.2.1/9:
A member of a structure or union may have any complete object type other than a
variably modified type.
What you could do instead is to declare a flexible array member, as demonstrated in the answer by Ouah.
The reason the compiler complains when you "flexibly declare" the array in the struct in global memory, is because global memory can only be allocated (declared) at compile-time and at compile time all sizes must be known. (The value of a variable is not known at compile time by definition.)
The reason it accepts a flexible array in a function, is because the function's local variables are created at the moment the function is entered and then the compiler can accept a variable size. (It boils down to the compiler allocating more memory on the stack and offsetting all accesses to local variables with the size - but different compilers could have a different approach.)
#include <stdio.h>
int size;
struct S {
int num;
int a[size]; // illegal: size must be known at compile time
};
int f(int size)
{
int a[size]; // legal as a is allocated on the stack
....
}
The following would be legal:
#include <stdio.h>
#define A_SIZE 10
struct S {
int num;
int a[A_SIZE]; // legal: A_SIZE is known at compile time
};
P.s.: I am not a C99 programmer; I may have some mistakes here.
I have a task to do and the content of the task is:
Please suggest a definition of linked list, which will keep the person's name and age in a flexible structure. Then write the procedure for inserting elements with the given name and age.
What exactly is a flexible structure? How to define it? And then how to malloc the size?
typedef struct Test {
int age; // ?
char name[?]; // ?
struct Test * next;
}Structure;
int main(void) {
Structure *one = malloc(???);
}
You are on the right track. However, there is no "flexible structure". You want to use a flexible array member (avail since C99) in a struct:
typedef struct {
int age;
size_t name_size; // size of the array, not length of the name!
char name[]; // Flexible array member
} Structure;
int main(void) {
Structure *one = malloc(sizeof(*one) + SIZE_OF_NAME_ARRAY);
}
Note I added a name_size field. C does not store the size of allocated arrays, so you might need this for safe copy/compare, etc. (prevent buffer overflows).
Using *one makes this term independent of the actual type used. The size of such a struct is as if the arrray had zero elements. However, it will be properly aligned, so it can differ from the same struct without the array.
Also note that you have to change the allocated size if you use other than a char array to something like sizeof(element_type) * ARRAY_SIZE. This is not necessary for chars, as their size is defined by the standard to be 1.
my guess: a flexible struct would be one that could handle any age and any name.
A unsigned int field would handle any age (within reason).
A char * field would handle any name.
The struct itself would be:
struct nameAge { unsigned int age; char * pName; };
an instance of the struct would be:
struct nameAge myNameAge;
Setting the age field would be:
myNameAge.age = ageValue;
Setting the name field would be:
myNameAge.name = malloc( numCharactersInName+1 );
strcpy( myNameAge.name, nameString );
How the code obtained the ageValue for age and/or the characters for NameString is up to the programmer to decide/implement.