Share variables internally across functions - c

Suppose I have a function like this:
static int init_processing(char *buf, FILE *stream, enum operationMode mode) {
/* save index of `stream' in current operations */
/* start processing */
/* save some important variables for continue_processing */
off_t position;
enum operationMode _mode;
return num_processing_operations_left;
}
.. that I would be calling occasionally. And I have another function that does the actual processing I want:
static int continue_processing(FILE *stream) {
/* lookup the index of `stream' in current operations */
/* do some stuff */
/* save some static variables */
static off_t left = position;
static void *some_ptr;
return --num_processing_operations_left;
}
I also have a cleaning function to invoke when finishing up a certain operation:
static int end_processing(FILE *stream) {
/* check */
if (num_processing_operations_left)
return 1;
/* clean everything */
return 0;
}
As you can see, this related functions technique is very familiar that it is used by the standard library itself (e.g [malloc, free, realloc], [fdopen, fopen, fclose]).
What I want to achieve here, is how to share some variables across a bunch of functions ?
I thought of two solutions:
Put each set of functions in a file of their own, providing static variables valid only for the file itself.
Use only one function that takes an extra enum parameter as a mode and structure the function accordingly.
But these solutions aren't actually solutions, they're just workarounds to cope with the problem. So, is there any standard technique to share variables among functions ?

Create a context structure keeping all you need:
struct Context
{
FILE * stream;
off_t position;
unsigned num_processing_operations_left;
/* define some more important variables */
}
and pass it to all functions in question:
static int init_processing(struct Context * pctx, char *buf, enum operationMode mode);
static int continue_processing(struct Context * pctx);
static int end_processing(struct Context * pctx);
int main(void)
{
struct Context ctx = {0};
/* init ctx here */
int result = init_processing(&ctx, ...);
...
result = continue_processing(&ctx);
...
result = end_processing(&ctx);
...
}

Related

Tcl pathInFilesystemProc get current filesystem

When creating a vfs using the tcl api how do you get the current filesystem in Tcl_Filesystem.pathInFilesystemProc
My code looks something like this:
typedef struct {
FILE* dbFile;
/*...*/
} FSBackend;
void createFS(const char* dbFile)
{
FSBackend* fsback = (FSBackend*)malloc(sizeof(FSBackend));
initDb(fsback,dbFile);
Tcl_Filesystem tfs;
tfs.typeName="Db Fs";
tfs.structureLength = sizeof(Tcl_Filesystem);
tfs.version = TCL_FILESYSTEM_VERSION_1;
tfs.pathInFilesystemProc = inFsProc;
/*...*/
Tcl_FSRegister((void*),tfs);
}
int inFsProc(Tcl_Obj* pathPtr,ClientData* cd)
{
/* How do I get my FSBackend struct here */
FSBackend* bk = /* ? */
int len;
const char* searchPath = Tcl_GetStringFromObj(pathPtr,&len);
char* foundPath = findFileInDb(searchPath,bk);
if (foundPath == 0) {
return -1;
}
cd = buildInternalRep(foundPath,bk);
return TCL_OK;
}
/**
...
*/
int main()
{
createFS("db1.db");
createFS("db2.db");
}
How do I, in inFsProc get back the struct I passed into Tcl_FSRegister?
The Tcl_FSData function says it can get it but I would then need to get a Tcl_Filesystem pointer
That's a weird one. The clientData handle there is not used to specify a mount point, but rather a separate capability of the filesystem type. Tcl's internal use of Tcl_FSRegister doesn't use it at all. The code which is as close as anything to a canonical use of it is the tclvfs package.
https://github.com/tcl-mirror/tclvfs/blob/master/generic/vfs.c#L385 shows us the use:
static void
Vfs_RegisterWithInterp(interp)
Tcl_Interp *interp;
{
ClientData vfsAlreadyRegistered;
/*
* We need to know if the interpreter is deleted, so we can
* remove all interp-specific mounts.
*/
Tcl_SetAssocData(interp, "vfs::inUse", (Tcl_InterpDeleteProc*)
Vfs_UnregisterWithInterp, (ClientData) 1);
/*
* Perform one-off registering of our filesystem if that
* has not happened before.
*/
vfsAlreadyRegistered = Tcl_FSData(&vfsFilesystem);
if (vfsAlreadyRegistered == NULL) {
Tcl_FSRegister((ClientData)1, &vfsFilesystem);
Tcl_CreateExitHandler(VfsExitProc, (ClientData)NULL);
Tcl_CreateThreadExitHandler(VfsThreadExitProc, NULL);
}
}
As you can see, the clientData there is really just being used as a marker so the code knows whether to do one-time initialisation.
To discover what the mount mapping is, you'll need to keep internal structures. You're strongly recommended to make the Tcl_Filesystem structure instance itself be global (or rather static at file scope) in your code.

Configure Parameters of LED Trigger from Kernel Space

I'm working on an embedded project. Our board is using Linux kernel v3.16.7. I'm working on supporting a couple of peripheral LEDs that monitor activity. I've successfully modified the boot procedure to load the drivers and create sysfs entries in /sys/class/leds/, which is great. I've also attached a oneshot trigger to the leds so I can echo 1 > shot from within /sys/class/leds/actled1\:green/ and the led blinks. Exactly what I want.
However, I want to configure the delays for each LED when I instantiate the driver during boot, and I'm not clear on how to do that. The driver creates sysfs entries in /sys/class/leds/actled1\:green/ called delay_on and delay_off, and I can write to them from userspace to configure the delays, but it should be possible to set their initial values from from kernel space during instantiation. I also want to be able to set the invert parameter (which is just another sysfs entry just like the delays).
How can I configure the parameters of an led trigger when I instantiate the driver from kernel space?
Below is how I instantiate the LED GPIOs. First I set up the structs required:
static struct gpio_led my_leds[] __initdata = {
{
.name = "actled1:green",
.default_trigger = "oneshot"
.gpio = ACTIVITY_LED_GPIO_BASE + 0,
.active_low = true,
},
{
.name = "actled2:red",
.default_trigger = "oneshot"
.gpio = ACTIVITY_LED_GPIO_BASE + 1,
.active_low = true,
},
};
static struct gpio_led_platform_data my_leds_pdata __initdata = {
.num_leds = ARRAY_SIZE(my_leds),
.leds = my_leds,
};
Then, I call this function to create the platform devices:
static int __init setup_my_leds (void)
{
struct platform_device *pdev;
int ret;
pdev = platform_device_alloc("leds-gpio", -1);
if (!pdev) {
return -ENOMEM;
}
ret = platform_device_add_data(pdev,
&my_leds_pdata,
sizeof(my_leds_pdata));
if (ret < 0) {
platform_device_put(pdev);
return ret;
}
ret = platform_device_add(pdev);
if (ret < 0) {
platform_device_put(pdev);
return ret;
}
return 0;
}
The definition for the gpio_led struct is in include/linux/leds.h line 327, and the definition for gpio_led_platform_data is in line 341 of the same file. The definition of platform_device_add_data is in drivers/base/platform.c line 284.
It may be useful to look at the source for the oneshot trigger (drivers/leds/trigger/ledtrig-oneshot.c) in order to answer the question. Also relevant is the "leds-gpio" driver (drivers/leds/leds-gpio.c).
I suspect the answer is somewhere in drivers/base/platform.c and the associated documentation, but I'm not seeing any functions that deal with the data I need.
To address some of the information that I inadvertently left out:
the boot loader sets the kernel arguments, and we can't modify the boot loader. that's fine; the values i want to set are constants and i can hard-code them in.
the driver is baked into the kernel at compile time (and, i presume, loaded by the bootloader) rather than loading a .ko with modprobe later.
i would love a general way to set arbitrary trigger parameters, not only oneshot's delay_on / delay_off. for example, oneshot's invert parameter.
i'm totally fine modifying oneshot / creating new triggers. in fact, once i get it working with oneshot, i'll need to create a new trigger that expands upon oneshot (which is also the reason i need to set arbitrary parameters).
There are a few issues and I think I've found the solutions, but even though you provided a good deal of info, there were some things missing, so I'll enumerate for all possible scenarios, so be patient ...
(1) Getting the initial values you want to set. I presume you have already figured this out, but ... You can get these from kernel cmdline parsing (e.g. you add the values to /boot/grub2/grub.cfg as myleds.delay_on=.... If you're loading via modprobe, you set a module parameter. These could also be a config file as in myleds.config_file=/etc/sysconfig/myleds.conf
(2) You could set them inside your setup_my_leds [except for the recalcitrance of oneshot_trig_activate--which we'll deal with soon enough]. From drivers/base/platform.c:
/**
* arch_setup_pdev_archdata - Allow manipulation of archdata before its used
* #pdev: platform device
*
* This is called before platform_device_add() such that any pdev_archdata may
* be setup before the platform_notifier is called. So if a user needs to
* manipulate any relevant information in the pdev_archdata they can do:
*
* platform_device_alloc()
* ... manipulate ...
* platform_device_add()
*
* And if they don't care they can just call platform_device_register() and
* everything will just work out.
*/
So, with that in mind, let's change your setup function slightly:
static int __init setup_my_leds (void)
{
struct platform_device *pdev;
int ret;
// get initial values you want to set, possibly storing away for later use
my_leds_get_init_values(...);
pdev = platform_device_alloc("leds-gpio", -1);
if (!pdev) {
return -ENOMEM;
}
// Choice (1): set your initial values in my_leds_pdata here
my_leds_set_init_values(&my_leds_pdata);
// NOTE: just does kmemdup and sets pdev->dev.platform_data
ret = platform_device_add_data(pdev,
&my_leds_pdata,
sizeof(my_leds_pdata));
if (ret < 0) {
platform_device_put(pdev);
return ret;
}
// Choice (2): set your initial values in pdev->dev.platform_data here
my_leds_set_init_values(pdev->dev.platform_data);
ret = platform_device_add(pdev);
if (ret < 0) {
platform_device_put(pdev);
return ret;
}
return 0;
}
(3) Unfortunately, since you're using .default_trigger = "oneshot", the above data will get blasted by oneshot_trig_activate in drivers/leds/trigger/ledtrig-oneshot.c. So, we need to deal with that.
Option (A): Assuming you can rebuild the whole kernel as you choose, just modify oneshot_trig_activate in ledtrig-oneshot.c and remove the the lines that use DEFAULT_DELAY. This is only really useful if you know that it's not used by anything else in your system that might need the default values.
Option (B): If you're not allowed to modify ledtrig-oneshot.c, but are allowed to add new triggers to drivers/leds/trigger, copy the file to (e.g.) ledtrig-oneshot2.c and do the changes there. You'll need to change the .name to .name = "oneshot2". The easy way [in vi, of course :-)] is :%s/oneshot/oneshot2/g. You'll also need to add a new entry in the Kconfig and Makefile for this. Then, change your struct definition to use the new driver: .default_trigger = "oneshot2"
Option (C): Assuming you can't [or don't want to] touch the drivers/leds/trigger directory, copy ledtrig-oneshot.c to your driver directory [renaming as appropriate]. Do the edits from option (B) above there. With some trickery in your Makefile, you can get it to build both my_led_driver.ko and ledtrig-oneshot2.ko. You'll need modify your Kconfig, possibly adding a depends on LED_TRIGGERS for the led trigger driver. You could also put the two into separate subdirectories and the individual Makefile/Kconfig might be simpler: my_led/my_driver and my_led/my_trigger
Option (C) would be more work up front, but might be cleaner and more portable in the long run. Of course, you could do option (A) for proof-of-concept, then do option (B), and do the "final ship" as option (C).
An alternate way for when you set the initial values: Remember the comment for my_leds_get_init_values was possibly storing away for later use. You could change oneshot2_trig_activate to call it instead of using DEFAULT_DELAY. I don't like this quite as much and prefer the solutions that simply neuter oneshot_trig_activate's offensive behavior. But, with some testing, you may find that this is the way you have to do it.
Hopefully, the above will work. If not, edit your question with additional info and/or restrictions [and send me a comment], and I'll be glad to update my answer [I've been doing drivers for 40+].
UPDATE: Okay, herein is a fully annotated and modified LED trigger driver that you can use as a drop in replacement for drivers/led/trigger/ledtrig-oneshot.c.
Because the invert parameter can not be passed directly through any standard struct you have access to in your setup function [i.e. it's stored in a private struct inside the trigger driver], remove the "Choice (1)" and "Choice (2)". We'll set them all at once inside the [modified] oneshot_trig_activate.
Also, the init parameters you want must be set up and stored as globals by the my_leds_get_init_values so the trigger driver can find them. That is, there is no way to do this cleanly (e.g. with a pointer to a private struct that gets passed around) as the structs you have access to in setup don't have a field for this. See the top part of the trigger driver for discussion on this.
My first step was to annotate the base driver with descriptive comments. There were no comments in it, except for K&R style for copyright and a single one-liner. My annotations are ANSI ("//") comments.
If I were taking over the driver, I would add these and leave them in. However, my level of comments might be considered "over-commenting" according to the kernel style guide and might be considered "cruft", particularly for a driver that is this straightforward.
Next step was to add the necessary changes. All places that have additions/changes are marked with a comment block that starts with "C:". These are the important places to look. Note that these comments are legitimate candidates to leave in. In other more complex drivers, the level of commenting is up to the author. The "C:" is just to highlight the places for you.
With the annotations, a straight line read through might be easier now. Also, a diff -u might also help. If you've got everything under git, so much the better.
Because of all this, I'd remove the "Option (A)" [direct modification of the original file] and do "Option (B)" or "Option (C)" only.
The trigger driver uses all static definitions, so the global edit I suggested before is not needed. I did do .name = "myled_oneshot";, so you'll need to match that with .default_trigger = "myled_oneshot";. Feel free to use my_leds_whatever to be consistent with your existing naming convention. When I do this for myself, I usually use my initials, so it becomes ce_leds_whatever--YMMV
Anyway, here's the entire modified trigger driver. Note that I've done the editing, but I've not tried to compile/build it.
/*
* One-shot LED Trigger
*
* Copyright 2012, Fabio Baltieri <fabio.baltieri#gmail.com>
*
* Based on ledtrig-timer.c by Richard Purdie <rpurdie#openedhand.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/ctype.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include "../leds.h"
// C: we need to get access to the init data populated by the setup function
// we have the "clean way" with a struct definition inside a header file and
// the "dirty way" using three separate int globals
// in either case, the externs referenced here must be defined in the "my_leds"
// driver as global
// C: the "clean way"
// (1) requires that we have a path to the .h (e.g. -I<whatever)
// (2) this would be easier/preferable for the "Option (C)"
// (3) once done, easily extensible [probably not a consideration here]
#ifdef MYLED_USESTRUCT
#include "whatever/myled_init.h"
extern struct myled_init myled_init;
// C: the "ugly way"
// (1) no need to use a separate .h file
// (2) three separate global variables is wasteful
// (3) more than three, and we really should consider the "struct"
#else
extern int myled_init_delay_on;
extern int myled_init_delay_off;
extern int myled_init_invert;
#endif
#define DEFAULT_DELAY 100
// oneshot trigger driver private data
struct oneshot_trig_data {
unsigned int invert; // current invert state
};
// arm oneshot sequence from sysfs write to shot file
static ssize_t led_shot(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
led_blink_set_oneshot(led_cdev,
&led_cdev->blink_delay_on, &led_cdev->blink_delay_off,
oneshot_data->invert);
/* content is ignored */
return size;
}
// show invert state for "cat invert"
static ssize_t led_invert_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
return sprintf(buf, "%u\n", oneshot_data->invert);
}
// set invert from sysfs write to invert file (e.g. echo 1 > invert)
static ssize_t led_invert_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
unsigned long state;
int ret;
ret = kstrtoul(buf, 0, &state);
if (ret)
return ret;
oneshot_data->invert = !!state;
if (oneshot_data->invert)
led_set_brightness_async(led_cdev, LED_FULL);
else
led_set_brightness_async(led_cdev, LED_OFF);
return size;
}
// show delay_on state for "cat delay_on"
static ssize_t led_delay_on_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return sprintf(buf, "%lu\n", led_cdev->blink_delay_on);
}
// set delay_on from sysfs write to delay_on file (e.g. echo 20 > delay_on)
static ssize_t led_delay_on_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
unsigned long state;
int ret;
ret = kstrtoul(buf, 0, &state);
if (ret)
return ret;
led_cdev->blink_delay_on = state;
return size;
}
// show delay_off state for "cat delay_off"
static ssize_t led_delay_off_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return sprintf(buf, "%lu\n", led_cdev->blink_delay_off);
}
// set delay_off from sysfs write to delay_off file (e.g. echo 20 > delay_off)
static ssize_t led_delay_off_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
unsigned long state;
int ret;
ret = kstrtoul(buf, 0, &state);
if (ret)
return ret;
led_cdev->blink_delay_off = state;
return size;
}
// these are the "attribute" definitions -- one for each sysfs entry
// pointers to these show up in the above functions as the "attr" argument
static DEVICE_ATTR(delay_on, 0644, led_delay_on_show, led_delay_on_store);
static DEVICE_ATTR(delay_off, 0644, led_delay_off_show, led_delay_off_store);
static DEVICE_ATTR(invert, 0644, led_invert_show, led_invert_store);
static DEVICE_ATTR(shot, 0200, NULL, led_shot);
// activate the trigger device
static void oneshot_trig_activate(struct led_classdev *led_cdev)
{
struct oneshot_trig_data *oneshot_data;
int rc;
// create an instance of the private data we need
oneshot_data = kzalloc(sizeof(*oneshot_data), GFP_KERNEL);
if (!oneshot_data)
return;
// save the pointer in the led class struct so it's available to other
// functions above
led_cdev->trigger_data = oneshot_data;
// attach the sysfs entries
rc = device_create_file(led_cdev->dev, &dev_attr_delay_on);
if (rc)
goto err_out_trig_data;
rc = device_create_file(led_cdev->dev, &dev_attr_delay_off);
if (rc)
goto err_out_delayon;
rc = device_create_file(led_cdev->dev, &dev_attr_invert);
if (rc)
goto err_out_delayoff;
rc = device_create_file(led_cdev->dev, &dev_attr_shot);
if (rc)
goto err_out_invert;
// C: this is what the driver used to do
#if 0
led_cdev->blink_delay_on = DEFAULT_DELAY;
led_cdev->blink_delay_off = DEFAULT_DELAY;
#endif
led_cdev->activated = true;
// C: from here to the return is what the modified driver must do
#ifdef MYLED_USESTRUCT
led_cdev->blink_delay_on = myled_init.delay_on;
led_cdev->blink_delay_off = myled_init.delay_off;
oneshot_data->invert = myled_init.invert;
#else
led_cdev->blink_delay_on = myled_init_delay_on;
led_cdev->blink_delay_off = myled_init_delay_off;
oneshot_data->invert = myled_init_invert;
#endif
// C: if invert is off, nothing to do -- just like before
// if invert is set, we implement this as if we just got an instantaneous
// write to the sysfs "invert" file (which would call led_invert_store
// above)
// C: this is a direct rip-off of the above led_invert_store function which
// we can _not_ call here directly because we don't have access to the
// data it needs for its arguments [at least, not conveniently]
// so, we extract the one line we actually need
if (oneshot_data->invert)
led_set_brightness_async(led_cdev, LED_FULL);
return;
// release everything if an error occurs
err_out_invert:
device_remove_file(led_cdev->dev, &dev_attr_invert);
err_out_delayoff:
device_remove_file(led_cdev->dev, &dev_attr_delay_off);
err_out_delayon:
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
err_out_trig_data:
kfree(led_cdev->trigger_data);
}
// deactivate the trigger device
static void oneshot_trig_deactivate(struct led_classdev *led_cdev)
{
struct oneshot_trig_data *oneshot_data = led_cdev->trigger_data;
// release/destroy all the sysfs entries [and free the private data]
if (led_cdev->activated) {
device_remove_file(led_cdev->dev, &dev_attr_delay_on);
device_remove_file(led_cdev->dev, &dev_attr_delay_off);
device_remove_file(led_cdev->dev, &dev_attr_invert);
device_remove_file(led_cdev->dev, &dev_attr_shot);
kfree(oneshot_data);
led_cdev->activated = false;
}
/* Stop blinking */
led_set_brightness(led_cdev, LED_OFF);
}
// definition/control for trigger device registration
// C: changed the name to "myled_oneshot"
static struct led_trigger oneshot_led_trigger = {
.name = "myled_oneshot",
.activate = oneshot_trig_activate,
.deactivate = oneshot_trig_deactivate,
};
// module init function -- register the trigger device
static int __init oneshot_trig_init(void)
{
return led_trigger_register(&oneshot_led_trigger);
}
// module exit function -- unregister the trigger device
static void __exit oneshot_trig_exit(void)
{
led_trigger_unregister(&oneshot_led_trigger);
}
module_init(oneshot_trig_init);
module_exit(oneshot_trig_exit);
MODULE_AUTHOR("Fabio Baltieri <fabio.baltieri#gmail.com>");
MODULE_DESCRIPTION("One-shot LED trigger");
MODULE_LICENSE("GPL");
As you can see in ledtrig-oneshot.c, the delay is always initialized with DEFAULT_DELAY. Unfortunately, if you want to be able to configure a different value at startup, this is a mechanism you will have to implement..
As Craig answered it should be from kernel command line options, but there could be a problem with embedded systems where the boot-loader passes the command line parameters and the boot-loaders cannot be modified, they are usually OTP . In that case I see only 2 options
hard coding in the kernel init function
as mac address is stored in eeprom for the nic driver to read, if the values can be stored in a flash (nor) and the value read on boot. This can be done after creating the mtd partitions during kernel boot.

How avoid using global variable when using nftw

I want to use nftw to traverse a directory structure in C.
However, given what I want to do, I don't see a way around using a global variable.
The textbook examples of using (n)ftw all involve doing something like printing out a filename. I want, instead, to take the pathname and file checksum and place those in a data structure. But I don't see a good way to do that, given the limits on what can be passed to nftw.
The solution I'm using involves a global variable. The function called by nftw can then access that variable and add the required data.
Is there any reasonable way to do this without using a global variable?
Here's the exchange in previous post on stackoverflow in which someone suggested I post this as a follow-up.
Using ftw can be really, really bad. Internally it will save the the function pointer that you use, if another thread then does something else it will overwrite the function pointer.
Horror scenario:
thread 1: count billions of files
thread 2: delete some files
thread 1: ---oops, it is now deleting billions of
files instead of counting them.
In short. You are better off using fts_open.
If you still want to use nftw then my suggestion is to put the "global" type in a namespace and mark it as "thread_local". You should be able to adjust this to your needs.
/* in some cpp file */
namespace {
thread_local size_t gTotalBytes{0}; // thread local makes this thread safe
int GetSize(const char* path, const struct stat* statPtr, int currentFlag, struct FTW* internalFtwUsage) {
gTotalBytes+= statPtr->st_size;
return 0; //ntfw continues
}
} // namespace
size_t RecursiveFolderDiskUsed(const std::string& startPath) {
const int flags = FTW_DEPTH | FTW_MOUNT | FTW_PHYS;
const int maxFileDescriptorsToUse = 1024; // or whatever
const int result = nftw(startPath.c_str(), GetSize, maxFileDescriptorsToUse , flags);
// log or something if result== -1
return gTotalBytes;
}
No. nftw doesn't offer any user parameter that could be passed to the function, so you have to use global (or static) variables in C.
GCC offers an extension "nested function" which should capture the variables of their enclosing scopes, so they could be used like this:
void f()
{
int i = 0;
int fn(const char *,
const struct stat *, int, struct FTW *) {
i++;
return 0;
};
nftw("path", fn, 10, 0);
}
The data is best given static linkage (i.e. file-scope) in a separate module that includes only functions required to access the data, including the function passed to nftw(). That way the data is not visible globally and all access is controlled. It may be that the function that calls ntfw() is also part of this module, enabling the function passed to nftw() to also be static, and thus invisible externally.
In other words, you should do what you are probably doing already, but use separate compilation and static linkage judiciously to make the data only visible via access functions. Data with static linkage is accessible by any function within the same translation unit, and you avoid the problems associated with global variables by only including functions in that translation unit that are creators, maintainers or accessors of that data.
The general pattern is:
datamodule.h
#if defined DATAMODULE_INCLUDE
<type> create_data( <args>) ;
<type> get_data( <args> ) ;
#endif
datamodule.c
#include "datamodule.h"
static <type> my_data ;
static int nftwfunc(const char *filename, const struct stat *statptr, int fileflags, struct FTW *pfwt)
{
// update/add to my_data
...
}
<type> create_data( const char* path, <other args>)
{
...
ret = nftw( path, nftwfunc, fd_limit, flags);
...
}
<type> get_data( <args> )
{
// Get requested data from my_data and return it to caller
}

creating C threads from text file

Let's say I have a text file composed like this
#####
typeofthread1
#####
typeofthread2
etc...
in my main I want to read that file, get the strings typeofthread1, typeofthread2 and create different threads using
pthread_t threads[NUM_THREADS];
for (i=0;i<NUM_THREADS;i++)
pthread_create(&threads[i], NULL, -> HERE <- , void * arg);
how can I put the just read typeofthread1, typeofthread2 strings into -> HERE <- making the main create two threads that point to two different thread prototype?
I want to do this because I want to create a program that creates different types of threads, depending on what I want to do, and choosing that from text file (sort of a configuration file)
any suggestion?
Map the string names to function pointers.
void * thread_type_1 ( void * );
void * thread_type_2 ( void * );
typedef void * (*start_routine_t)(void *);
typedef struct mapping_t {
const char * name;
start_routine_t function;
} mapping_t;
const mapping_t mappings[] = {
{"thread-type-1", &thread_type_1},
{"thread-type-2", &thread_type_2},
};
const size_t mapping_count =
sizeof(mappings)/sizeof(mappings[0]);
To select the proper thread function, loop over items in mappings and grab the function when the name matches.
start_routine_t get_start_routine ( const char * name )
{
size_t i;
for ( i=0; i < mapping_count; ++i )
{
if (strcmp(name,mappings[i].name) == 0) {
return mappings[i].function;
}
}
return NULL;
}
In wherever you launch the thread, you can use this as:
start_routine_t start_routine;
/* find start routine matching token from file. */
start_routine = get_start_routine(name);
if (start_routine == NULL) {
/* invalid type name, handle error. */
}
/* launch thread of the appropriate type. */
pthread_create(&threads[i], NULL, start_routine, (void*)arg);
A better approach would be to create a default thread_dispatch function that you launch all your pthreads with. This dispatch function would take a structure that contained a void* to a structure that contained the thread-specific data, and a string that specified the type of the thread-function you wanted to run. You could then, using a look-up table mapping the string to the function-pointer type created in a code-module, find the appropriate function pointer, and pass the thread-specific data to that function. So this would look something like the following:
typedef struct dispatch_data
{
char function_type[MAX_FUNCTION_LENGTH];
void* thread_specific_data;
} dispatch_data;
void* thread_dispatch(void* arg)
{
dispatch_data* data = (dispatch_data*)arg;
//... do look-up of function_pointer based on data->function_type string
return function_pointer(data->thread_specific_data);
}

Counting system calls

I have this .c file that counts the system calls that linux calls. These are just the main functions. There were a couple of other things that I had to do, like create an array
unsigned long syscall_counts[345];
and then in another file with some assembly I incremented the array with the command:
incl syscall_counts(,%eax,4)
// This function is called each time the application calls read(). It starts the process of
// accumulating data to fill the application buffer. Return a pointer representing the current
// item. Return NULL if there are no more items.
//
static void *counter_seq_start(struct seq_file *s, loff_t *record_number)
{
if (*record_number > 347)
return NULL;
return (void*)s;
}
// This function is called to compute the next record in the sequence given a pointer to the
// current record (in bookmark). It returns a pointer to the new record (essentially, an updated
// bookmark) and updates *record_number appropriately. Return NULL if there are no more items.
//
static void *counter_seq_next(struct seq_file *s, void *bookmark, loff_t *record_number)
{
unsigned long *temp_b =(unsigned long*) bookmark;
(*temp_b)++;
if (*temp_b > 345)
return NULL;
return (void*)temp_b;
}
// This function is called whenever an application buffer is filled (or when start or next
// returns NULL. It can be used to undo any special preparations done in start (such as
// deallocating auxillary memory that was allocated in start. In simple cases, you often do not
// need to do anything in this function.
//
static void counter_seq_stop(struct seq_file *s, void *bookmark)
{
}
// This function is called after next to actually compute the output. It can use various seq_...
// printing functions (such as seq_printf) to format the output. It returns 0 if successful or a
// negative value if it fails.
//
static int counter_seq_show(struct seq_file *s, void *bookmark)
{
loff_t *bpos = (loff_t *) bookmark;
seq_printf(s, "value: %Ld\n", *bpos);
return 0;
}
// Define the only file handling function we need.
static int counter_open(struct inode *inode, struct file *file)
{
return seq_open(file, &counter_seq_ops);
}
my output is very strange:
Anyone have any idea where the issue is?
Don't you think :
static int counter_seq_show(struct seq_file *s, void *bookmark) {
unsigned long *bpos = (unsigned long *) bookmark;
seq_printf(s, "value: %Ld\n", *bpos);
return 0;
}
Or even
static int counter_seq_show(struct seq_file *s, void *bookmark) {
seq_printf(s, "value: %lu\n", *((unsigned long *)bpos));
return 0;
}
I haven't fully understood your program but I saw two different ways you cast 'bookmark'. In one function you cast it to be 'unsigned long *' and other you do 'loff_t *' (long int). Ideally they should be the same, but are you doing it this way for some reason ?
HTH

Resources