I am trying to install the matlab-psychtoolbox-3 and I recieve this error:
$ sudo apt-get install matlab-psychtoolbox-3
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package matlab-psychtoolbox-3
Can anybody tell me how to solve the problem?
I guess this is old, but for anyone struggling with this error while installing psych-toolbox this is how to solve it. Basically, the error is because the neurodebian package is not installed in your system. To do so, run: sudo apt-get install neurodebian
Once you do this, then follow the next step, i.e., sudo apt-get install matlab-psychtoolbox-3
Then you are all set.
assuming that you've added the neurodebian ppa to your system witch is the easyest way to get the psychtoolbox to ubuntu
try to update your packet list with sudo apt-get update and then try to install again with sudo apt-get install matlab-psychtoolbox-3
if that doesn’t help check your software sources and see if the neurodebian nonfree ppa is installed (all matlab stuff is part of the nonfree branch).
if you got the free branch installed remove it put add the non free branch:
wget -O- http://neuro.debian.net/lists/trusty.de-md.full | sudo tee /etc/apt/sources.list.d/neurodebian.sources.list
sudo apt-key adv --recv-keys --keyserver hkp://pgp.mit.edu:80 2649A5A9
that should do the trick
Related
I'm trying to build a custom docker container using the RHEL 8 UBI. As part of this I want to install the MSSQL 17 ODBC driver.
I've followed the steps outlined in Microsofts Documentation here:
https://learn.microsoft.com/en-us/sql/connect/odbc/linux-mac/installing-the-microsoft-odbc-driver-for-sql-server?view=sql-server-ver15#redhat17
And added the Microsoft repo to my yum.repos.d directory however when I try to build the container I get the following error: nothing provides e2fsprogs needed by msodbcsql17-17.6.1.1-1.x86_64
When I dug a bit further into this it looks as though it looks as though for RHEL-7 Microsoft suggest installing e2fsprogs manually you can see that here: https://learn.microsoft.com/en-us/sql/connect/odbc/linux-mac/installing-the-microsoft-odbc-driver-for-sql-server?view=sql-server-ver15#offline-installation
This unfortunately isn't possible in RHEL-8 as e2fsprogs-static has been removed: https://access.redhat.com/documentation/en-us/red_hat_enterprise_linux/8/html-single/considerations_in_adopting_rhel_8/index#removed-packages_changes-to-packages
The full output from the build is:
$ docker build -f ./test.dockerfile -t daark:1 .
Sending build context to Docker daemon 25.77MB
Step 1/7 : FROM registry.redhat.io/ubi8/ubi
---> a1f8c9699786
Step 2/7 : RUN curl https://packages.microsoft.com/config/rhel/8/prod.repo > /etc/yum.repos.d/mssql-release.repo
---> Using cache
---> 90b3e1514239
Step 3/7 : RUN yum search odbc
---> Using cache
---> b26f78d0da28
Step 4/7 : RUN yum search msodbcsql17
---> Using cache
---> c6f7751b97dc
Step 5/7 : ENV ACCEPT_EULA=Y
---> Using cache
---> 2b0003944673
Step 6/7 : RUN yum install -y unixODBC unixODBC-devel
---> Using cache
---> 1d0b8c594905
Step 7/7 : RUN yum install -y msodbcsql17
---> Running in 67c30e75fb42
Updating Subscription Management repositories.
Unable to read consumer identity
This system is not registered to Red Hat Subscription Management. You can use subscription-manager to register.
Last metadata expiration check: 0:08:11 ago on Wed Aug 5 09:36:32 2020.
Error:
Problem: cannot install the best candidate for the job
- nothing provides e2fsprogs needed by msodbcsql17-17.6.1.1-1.x86_64
(try to add '--skip-broken' to skip uninstallable packages or '--nobest' to use not only best candidate packages)
The command '/bin/sh -c yum install -y msodbcsql17' returned a non-zero code: 1
This error is pretty reproducible here is the test dockerfile i'm using to debug
FROM registry.redhat.io/ubi8/ubi
RUN curl https://packages.microsoft.com/config/rhel/8/prod.repo > /etc/yum.repos.d/mssql-release.repo
RUN yum search odbc
RUN yum search msodbcsql17
ENV ACCEPT_EULA=Y
RUN yum install -y unixODBC unixODBC-devel
RUN yum install -y msodbcsql17
Has anyone managed to get this ODBC driver installed on an RHEL 8 UBI based container?
I found a work around that I hope will help the next person to hit this.
Rather than running yum install -y msodbcsql17 I instead used yum to download the RPM
yum download -y msodbcsql17
then used rpm -Uvh --nodeps msodbcsql17*rpm to install it.
You can use this docker file:
FROM registry.redhat.io/ubi8/ubi
RUN curl https://packages.microsoft.com/config/rhel/8/prod.repo > /etc/yum.repos.d/mssql-release.repo
RUN yum search odbc
RUN yum search msodbcsql17
ENV ACCEPT_EULA=Y
RUN yum install -y unixODBC unixODBC-devel
RUN yum download -y msodbcsql17
RUN rpm -Uvh --nodeps msodbcsql17*rpm
#daark thank you for posting your solution. Your solution got me over the problem I was facing. I ended modifying your solution to the following (in case it helps anyone else):
FROM registry.access.redhat.com/ubi8/python-38
USER root
RUN yum update --assumeyes && \
yum install --assumeyes \
unixODBC-devel \
&& yum clean all
RUN curl https://packages.microsoft.com/config/rhel/8/prod.repo > /etc/yum.repos.d/mssql-release.repo
RUN yum download -y msodbcsql17
RUN ACCEPT_EULA=y rpm -Uvh --nodeps msodbcsql17*rpm
I tried to add this to the #daark's solution as a comment, but it was too difficult to display the code properly.
Good luck to anyone else facing this issue 🍀
Latest msodbcsql17 release fixes this issue. The documentation steps work smooth once again. See docs issue
I can confirm that installation on redhat/ubi8 works with msodbcsql17-17.8.1.2-1.x86_64.rpm.
FROM redhat/ubi8
COPY msodbcsql17-17.8.1.2-1.x86_64.rpm /tmp
RUN MSSQL_PID=Developer ACCEPT_EULA=Y yum -y localinstall /tmp/msodbcsql17-17.8.1.2-1.x86_64.rpm; rm /tmp/msodbcsql17-17.8.1.2-1.x86_64.rpm
I installed SQLserver in my ubuntu. But when I install sqlserver-tool something happened.
type
sudo apt-get install unixodbc-dev
return
eading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
unixodbc-dev : Depends: unixodbc (= 2.3.7)
Depends: odbcinst1debian2 (= 2.3.7) but 2.3.6-0.1build1 is to be installed
E: Unable to correct problems, you have held broken packages.
so that I tried below
sudo apt-get install unixodbc
returns
Reading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
unixodbc : Depends: odbcinst1debian2 (>= 2.3.7) but 2.3.6-0.1build1 is to be installed
Depends: libodbc1 (>= 2.3.7) but 2.3.6-0.1build1 is to be installed
E: Unable to correct problems, you have held broken packages.
and lastly
sudo apt-get install odbcinst1debian2
return
eading package lists... Done
Building dependency tree
Reading state information... Done
Some packages could not be installed. This may mean that you have
requested an impossible situation or if you are using the unstable
distribution that some required packages have not yet been created
or been moved out of Incoming.
The following information may help to resolve the situation:
The following packages have unmet dependencies:
odbcinst1debian2 : PreDepends: multiarch-support but it is not installable
E: Unable to correct problems, you have held broken packages.
I completely stacked and have no idea at all.
Dose anybody can help for me. Thanks.
User rim96 has right, the reason is that Microsoft's source list includes unixodbc in higer version (2.3.7) that depends on multi-arch (unlike Ubuntu's version 2.3.6)
I think that unixodbc 2.3.6 is good enough. In my case the follow steps helped me.
Remove Microsoft's source list.
mv /etc/apt/sources.list.d/mssql-tools.list ~/
Update sources
sudo apt-get update
Install unixodbc 2.3.6 from Ubuntu repository
sudo apt-get install unixodbc
Move Microsoft's source list back
mv ~/mssql-tools.list /etc/apt/sources.list.d/
Update sources again
sudo apt-get update
Install mssq-tools (or whatever you want) from Microsoft's repository
sudo apt-get install mssql-tools
User Jiří Chmiel's answer helped a lot, though I changed two lines to:
sudo mv /etc/apt/sources.list.d/msprod.list ~/
and:
sudo mv ~/msprod.list /etc/apt/sources.list.d/
was what worked for me
(Ubuntu 20.04 in Dec '20)
This problems looks like you forgot to run sudo apt-get update before installing odbcinst1debian2. On focal this package does not depend on multiarch-support.
From https://askubuntu.com/questions/1232332/installing-odbcins1debian2-broken-dependency-on-ubuntu-20-04-lts
If you follow Microsoft install guide for SQL Server Tools, for Ubuntu it says
If you are using Ubuntu 18.04 or Ubuntu 20.04, change the repository path in step 2 below from /ubuntu/16.04 to /ubuntu/18.04 or /ubuntu/20.04
So in step 2, you should do
curl https://packages.microsoft.com/config/ubuntu/20.04/prod.list | sudo tee /etc/apt/sources.list.d/msprod.list
instead of
curl https://packages.microsoft.com/config/ubuntu/16.04/prod.list | sudo tee /etc/apt/sources.list.d/msprod.list
Im running Ubuntu 18.04 and trying to install ROS for the first time on my machine. I have tried to follow the instructions at: http://wiki.ros.org/melodic/Installation/Ubuntu
I get stuck at this part.
sudo apt-get install ros-melodic-desktop-full
My attempts:
sudo apt -f install
sudo apt update --fix-missing
sudo dpkg --configure -a
sudo dpkg --remove --force-remove--reinstreq
sudo apt clean
sudo apt update
sudo rm /var/lib/apt/lists/lock
sudo rm /var/cache/apt/archives/lock
Nothing has worked so far.
Terminal commands:
$sudo apt-get install ros-melodic-desktop-full
Reading package lists… Finished
Builds dependency trees
Reading state information ... Finished
Some packages could not be installed. It may mean that you have requested
an impossible situation or, if you use the unstable distribution
that some necessary packages have not yet been created or moved
from "Incoming".
The following information may help to resolve the situation:
The following packages have dependencies that cannot be satisfied:
rose-melodic-desktop-full: Dependent on: rose-melodic-desktop but it will not be installed
Depending on: rose-melodic-perception but it will not be installed
Depending on: rose-melodic-simulators but it will not be installed
Depending on: ros-melodic-urdf-sim-tutorial but it will not be installed
E: Could not correct the problems, you have withheld broken packages.
Please help me install ROS
1 - After following ROS melodic Installation first steps (see link below), Try to install it with the link "click here" below the "sudo apt install ros-melodic-desktop-full" line
ROS melodic Installation page
If it's doesn't work
2 - check, "Software & Update" parameters
(if you cannot find it: launch "Ubuntu Software Center" and in the menu bar, on top, select "Software & Update")
In "Other Sofware" tab, the link
"http://pacckage.ros.org/ros/ubuntu bionic main"
is printed, and in "Autentication" tab a key from Open Robotics is printed
3 - Try to do 1- again, if it doesn't work, follow 4-
4 - In "Updates" tab, check "recommanded Updates", launch "Update Manager" and install updates (I don't do it properly on my PC)
5 - And finally you need to install manually rosdep with:
"sudo apt-get install python-rosdep"
Ubuntu (apt) does NOT allow packages with the same name but different versions to be installed.
Remove other versions first. For example: apt remove ros-desktop*
first of all install program on ubuntu.
sudo apt-get update
sudo apt-get upgrade
after update packet try follow the instructions at: enter link description here again
I got it working like so:
Install deps:
sudo apt install gazebo9-common libgazebo9-dev gazebo9 ros-melodic-gazebo-ros-pkgs ros-melodic-gazebo-dev ros-melodic-gazebo-ros-control ros-melodic-gazebo-ros ros-melodic-urdf-sim-tutorial ros-melodic-simulators
Install ros melodic
sudo apt-get install ros-melodic-desktop-full
I have Install php 7.3 and apache2 but when I try to start apache2 , I have this error :
service apache2 start
apache2: Syntax error on line 146 of /etc/apache2/apache2.conf: Syntax error on line 3 of /etc/apache2/mods-enabled/php7.3.load: Cannot load /usr/lib/apache2/modules/libphp7.3.so into server: /usr/lib/apache2/modules/libphp7.3.so: cannot open shared object file: No such file or directory
I really don't know how to resolve this problem, I have tried to remove and reinstall without success.
You're getting that error because the PHP 7.3 library for Apache is not installed.
sudo apt install -y libapache2-mod-php7.3
The above command should fix it.
It solved my problem:
sudo add-apt-repository ppa:ondrej/php
sudo apt-get update
sudo apt-get install php7.3
sudo apt-get install php7.3-cli php7.3-common php7.3-json php7.3-opcache php7.3-mysql php7.3-mbstring php7.3-zip php7.3-fpm php7.3-intl php7.3-simplexml
sudo service apache2 restart
For me the problem was that I did not install apache tools for php.
On arch linux:
yaourt -S php-apache
After that, module appeared in the folder.
The best way not to make a mistake is to follow guide: https://wiki.archlinux.org/title/Apache_HTTP_Server#PHP
I am trying install wxhaskell on ubuntu
(and I have already installed wxwidget and it works well in codeblock)
I run cabal install wxc in terminal
and here is output
/tmp/wxc-0.92.1.1-2711/wxc-0.92.1.1/Setup.hs:25:8:
Could not find module Distribution.Compat.Exception
It is a member of the hidden package Cabal-1.22.5.0.
it is a hidden module in the package Cabal-1.16.0
Use -v to see a list of the files searched for.
Failed to install wxc-0.92.1.1
cabal: Error: some packages failed to install:
wxc-0.92.1.1 failed during the configure step. The exception was:
ExitFailure 1
actually, I can find Distribution.Compat.Exception
and I tried sudo ghc-pkg expose Cabal-1.16.0
sudo ghc-pkg expose Cabal-1.22.5.0 but nothing changed
someone help me out, great thanks!
If you are using ubuntu I think I have a solution. If you install GHC in ubuntu via "apt-get install ghc", all ghc packages are installed in /usr/lib/ghc/xyz. If you have installed ghc manually, not with a package manager, I don't know a solution.
Try this:
sudo cabal install cabal-install --global
Then do all the wxHaskell specific cabal installs the same way. So:
sudo cabal install wxdirect --global
sudo cabal install wxc --global
...
If this doesn't work, try this:
rm -rf ~/.ghc