I have a report in SSRS that starts with three header rows and then has a total row. I want the three header rows to repeat on each page, but not the total row.
For the three header rows, I have their property settings at:
KeepWithGroup - After
RepeatOnNewPage - True
and the total row at:
KeepWithGroup - None
RepeatOnNewPage - False
When trying to preview the report, I get the following error message:
The tablix 'table1' has an invalid TablixMember. The TablixMember must
have the same value set for the RepeatOnNewPage property as those
following or preceding the dynamic TablixMember. (Expected Value:
"True"; Actual Value: "False")
I've experimented with other settings, but I can't seem to get this to work. I have a group and detail set immediately following the total row, which is listed as static in the Row Groups listing. I also have the same total row at the end of the report.
Any help or suggestions would be appreciated.
This is likely a hacky way to deal with it, but I found a solution that worked for me.
I added a hardcoded column to my dataset, and added that value (now present on every row) as the parent group. This allowed me to list global totals at the top of the report without interfering with how SSRS wanted to display the tablix header.
Again - I'm sure this is a contravention of how SSRS is supposed to operate, but it worked perfectly for me in my situation.
It appears that if it is created using a Matrix rather than a Table, you can add a Total Row to your outer group, then use the option "Repeat header columns on each page" in Tablix properties.
See here
My workaround, I have added both the headers ( you can add on the bases of requirement) in first row and then set below properties.
KeepTogether= True,
KeepWithGroup=After,
RepeatOnNewPage= TRUE
Before:
After:
Related
I have a stored procedure which drops either 1 or 2 columns from the result set. In my SSRS report, I have all possible columns that may come from the result set as dataset fields. I am trying to use the IsMissing function to change the column visibility, but it is not working. How can I make this functionality work?
I tried using examples from
https://sqlserverbi.blog/tag/hide-columns/
and
https://www.allaboutmssql.com/2013/01/ssrs-ismissing-visibility-function.html
where I right click the column, select Column Visibility and add an expression to the Show or hide based on an expression line.
Here is how I have been trying to use the expressions:
When I want to hide 2 of the columns I use:
=Fields!LINE_30_A.IsMissing And Fields!LINE_30_B.IsMissing
and when I want to hide only one of them I use:
=Fields!LINE_30.IsMissing
I have also tried the expressions like this:
=IIF(Fields!LINE_30_A.IsMissing And Fields!LINE_30_B.IsMissing,True,False)
I ran my stored procedure in a way that has dropped 1 of the columns from the result set. In this case the expression Fields!LINE_30.IsMissing should have been evaluated and I should be seeing the columns for Fields!LINE_30_A and Fields!LINE_30_B. But I only see the column for Fields!LINE_30 (which shouldn't be showing at all) and the other 2 columns are hidden. I also receive these 2 warnings:
1) Warning [rsErrorReadingDataSetField] The dataset ‘DataSet1’ contains a definition for the Field ‘LINE_30’. The data extension returned an error during reading the field. There is no data for the field at position 11.
2) Warning [rsMissingFieldInDataSet] The dataset ‘DataSet1’ contains a definition for the Field ‘LINE_30’. This field is missing from the returned result set from the data source.
I am new to SSRS.
In report, I have One table layout result where its first row (there is a bug in total) and last row is having total of all the fields. (Like shown in below image)
Given 「Total」 in first row, which I want to remove from the Report simply. I have its source file and I tried already so many ways but I am not getting its solution.
Edited
Design View of the same is here
Row Groups Panel is looking like:
Group Properties:
Expression 1(top left most):
=Iif(Fields!LineCaption.Value="","TOTAL", Fields!DispOrder.Value & ". " & Fields!LineName.Value)
Expression 2(below of top left):
=Iif(Fields!LineCaption.Value=""," ", Fields!AddupInfo.Value)+ " "
Thank you to All Commentators for commenting and giving your precious time in my problem with suggestions.
But I have found my own way solution.
By creating condition on Row_Group Visibility option while it loads the data from server.
As「Total」field was getting calculated in Row_Group only. So in Visibility option, I checked for first Row that "If first row is not Line_Name(My field name) then Hide that Row".
Maybe this is not the accurate answer but this was the only option for me to add.
You can do it via the context menu in the matrix view, not in the "Row Group" are:
I hope this is not a stupid question, but I have searched everywhere and have tried everything.
I have a dashboard and would like to group the tablix (The dashboard is inside the tablix) by one of the Parameters (Consultant). There are a few Data sets(queries) in the report and all of the Parameters are filtered with IN in the where clause.
The problem I have is that when I go to the row group properties and select the Parameter in the expression, then it automatically adds a (0) at the end. If I take the (0) away then I get the error message:
the group expression used in grouping 'Group1' returned a data type
that is not valid
I know the (0) is for getting the first value, but I am using Multi-valued Parameters.
I have tried one thing I found, but unfortunately it didn't work for me (SSRS Group By Parameter).
Edited:
This is to show you that there are multiple Data Sets(Queries) in this report
I have the dashboard in a tablix so that I can group for each Consultant, so when I choose 3 Consultant, I get 3 dashboards.
Expression used:
Then I get this error:
I have also tried using the CStr, but also no luck.
When I add the Parameter in any expression box it automatically put the (0) as below:
But then it doesn't use the parameter as I get an #Error where is should be the Consultant name.
I also used this option for page break but end up with graphs below each other:
This is what happens to the Charts(Sub Reports)
To give you an idea how the dashboard should look for each Consultant.
Regarding the other question I saw. I just tried exactly as they said but also no luck
I hope this isn't too much information. Just trying to help you help me.
Thank you!
UPDATE:
Parameter Properties:
Have you tried using the list tool to separate the sub reports by Consultant? A list acts like a container and will create whatever is inside for your grouping. You should also be able to apply a parameter to the list for filtering.
I have a SSRS report which have N number of Columns. I need to hide Certain columns based on a parameter "jobcode" . I have tried below expression in Column Visibility Pane,
=iif(Parameters!JobCode.Value=1,"False","True")
While Executing the report I got below Error,
"The Hidden Expression used in the tablix 'Tablix1' returned a
datatype that is not valid"
I have tried like below,
=iif(Parameters!JobCode.Value=1,0,1)
But, got the same error. Can Anyone help me to find out answers for below queries
How to achieve the above requirement in ssrs?
If I need hide column based on multiple parameter values, say 0 and 1, How to do it?
Thanks for the help.
If JobCode = 0 , Show
=IIF(CInt(Fields!JobCode.Value) = 0,true,false)
Try this.
Follow these steps:
Right click in your column>Column Visibility>Show or hide based on an expression
Expression, use that:
=Parameters!parameter_name.Value<>1
On my first tab, I need to return the data from the second tab, columns A,B and C; only when the value of column A is greater than 0. I have pics to send but don't see a way to upload them. Currently using this formula, but have been unable to expand on it to get what I need.
=VLOOKUP('MSA Units'!A4, 'MSA Units'!A4:C882,1,FALSE)
I have also tried various forms of INDEX and MATCH arguments with no good results.
HERE IS REVISED LINK TO IMAGES: http://imgur.com/a/20J0v
Filter MSA Units and for columnA select all other than (Blanks). Copy ColumnsA:C of what remains visible into Daily Report Coversheet.