On my family's main computer, my MS SQL Server login works fine, but on my laptop, I get an error when using the same login: https://i.stack.imgur.com/jpYSy.png
I've tried various solutions (enabling TCP/IP and Named Pipes, creating an inbound rule for TCP 1433 in firewall, making sure SQL Server Browser is running, etc.) but none of them have worked so far. I am able to log on my the local server on my laptop with no errors. to the If anyone could figure this out for me, I would really appreciate it.
(Keep in mind that I am relatively new to the server side of programming)
Based on the image you posted with your question, it appears that the login and/or password is incorrect. When you attempt to connect to the instance of SQL Server from your laptop, are you using the same SQL Server Login that you use on the "family computer"? It may be that at one time you saved the credentials on your laptop, and possibly the login and/or password has changed. Can you please verify the instance is the exact same, the login and the password are identical? Following that, you should either be able to connect, or will receive a different type of login error.
Are you trying to connect using the IP Address or the name of the server? If you are using the name of the server then try starting the SQL Server Browser service.
It appears that it cannot find that server, so just as a test turn the firewall off (momentarily) for the server and see if that is what is blocking you. If it is make sure that the firewall has a rule to allow the sqlserver.exe program to go through.
Thanks for the help, but it turns out that my antivirus was messing with my internet connection, and Firewall was blocking sqlserver.exe.
I am struggling to get a SQL Server connection from machine A to machine B which is running the SQL Server.
I have Googled extensively and all the things I have found have not worked. Nor do they lead you step by step through the process of solving this.
We are not using Kerberos, but NTLM where configured.
The machines involved are (xx is used to obscure some of the machine name for security purposes):
xxPRODSVR001 - Windows Server 2012 Domain Controller
xxDEVSVR003 - Windows Server 2012 (This machine is generating the error)
xxDEVSVR002 - Windows Server 2012 (This machine is running SQL Server 2012)
The following SPN's are registered on the DC (xxPRODSVR001). I have obscured the domain with yyy for security purposes:
Registered ServicePrincipalNames for CN=xxDEVSVR002,CN=Computers,DC=yyy,DC=local:
MSSQLSvc/xxDEVSVR002.yyy.local:49298
MSSQLSvc/xxDEVSVR002.yyy.local:TFS
RestrictedKrbHost/xxDEVSVR002
RestrictedKrbHost/xxDEVSVR002.yyy.local
Hyper-V Replica Service/xxDEVSVR002
Hyper-V Replica Service/xxDEVSVR002.yyy.local
Microsoft Virtual System Migration Service/xxDEVSVR002
Microsoft Virtual System Migration Service/xxDEVSVR002.yyy.local
Microsoft Virtual Console Service/xxDEVSVR002
Microsoft Virtual Console Service/xxDEVSVR002.yyy.local
SMTPSVC/xxDEVSVR002
SMTPSVC/xxDEVSVR002.yyy.local
WSMAN/xxDEVSVR002
WSMAN/xxDEVSVR002.yyy.local
Dfsr-12F9A27C-BF97-4787-9364-D31B6C55EB04/xxDEVSVR002.yyy.local
TERMSRV/xxDEVSVR002
TERMSRV/xxDEVSVR002.yyy.local
HOST/xxDEVSVR002
HOST/xxDEVSVR002.yyy.local
Registered ServicePrincipalNames for CN=xxDEVSVR003,CN=Computers,DC=yyy,DC=local:
MSSQLSvc/xxDEVSVR003.yyy.local:1433
MSSQLSvc/xxDEVSVR003.yyy.local
Hyper-V Replica Service/xxDEVSVR003
Hyper-V Replica Service/xxDEVSVR003.yyy.local
Microsoft Virtual System Migration Service/xxDEVSVR003
Microsoft Virtual System Migration Service/xxDEVSVR003.yyy.local
Microsoft Virtual Console Service/xxDEVSVR003
Microsoft Virtual Console Service/xxDEVSVR003.yyy.local
WSMAN/xxDEVSVR003
WSMAN/xxDEVSVR003.yyy.local
TERMSRV/xxDEVSVR003
TERMSRV/xxDEVSVR003.yyy.local
RestrictedKrbHost/xxDEVSVR003
HOST/xxDEVSVR003
RestrictedKrbHost/xxDEVSVR003.yyy.local
HOST/xxDEVSVR003.yyy.local
Now if only the SQL Server error message was more descriptive and told me what principal name it was trying to connect to I might be able to diagnose this.
So can anyone step me through how to solve this one or can you see anything in what I have provided that is wrong?
I would be happy to generate more debug info, just tell me what you need.
I had this problem with an ASP.NET MVC app I was working on.
I realized I had recently changed my password, and I was able to fix it by logging out and logging back in again.
The SSPI context error definitely indicates authentication is being attempted using Kerberos.
Since Kerberos authentication SQL Server's Windows Authentication relies on Active Directory, which requires a trusted relationship between your computer and your network domain controller, you should start by validating that relationship.
You can quickly check that relationship, thru the following Powershell command Test-ComputerSecureChannel.
Test-ComputerSecureChannel -Verbose
If it returns False, you must repair your computer Active Directory secure channel, since without it no domain credencials validation is possible outside your computer.
You can repair your Computer Secure Channel, thru the following Powershell command:
Test-ComputerSecureChannel -Repair -Verbose
If the above doesn't work (because your domain credentials don't work because the machine isn't trusted) you can use NETDOM RESET instead from an elevated cmd.exe (not PowerShell) prompt:
NETDOM RESET %COMPUTERNAME% /UserO:domainAdminUserName /Password0:* /SecurePasswordPrompt
(Yes, the command-line arguments really do have an O (Capital-"Oh", not zero 0). The /Password0:* /SecurePasswordPrompt option will use a credential popup instead of having you put your password directly in the command-line, which you must never do).
Check the security event logs, if you are using kerberos you should see logon attempts with authentication package: Kerberos.
The NTLM authentication may be failing and so a kerberos authentication attempt is being made. You might also see an NTLM logon attempt failure in your security event log?
You can turn on kerberos event logging in dev to try to debug why the kerberos is failing, although it is very verbose.
Microsoft's Kerberos Configuration Manager for SQL Server may help you quickly diagnose and fix this issue.
Here is a good story to read: http://houseofbrick.com/microsoft-made-an-easy-button-for-spn-and-double-hop-issues/
I was getting the same error when trying through windows authentication. Sounds ludicrous but just in case it helps someone else: it was because my domain account got locked somehow while I was still logged in (!). Unlocking the account fixed it.
Try setting Integrated Security=true to remove this param from the connection string.
IMPORTANT: As user #Auspex commented,
Removing Integrated Security will prevent this error, because the error occurs when trying to login with your Windows credentials. Unfortunately, most of the time, you want to be able to login with your Windows credentials
I was logging into Windows 10 with a PIN instead of a password. I logged out and logged back in with my password instead and was able to get in to SQL Server via Management Studio.
Just to add another potential solution to this most ambiguous of errors The target principal name is incorrect. Cannot generate SSPI context. (.Net SqlClient Data Provider) :
Verify that the IP that is resolved when pinging the SQL Server is the same as the one in the Configuration Manager. To check, open SQL Server Configuration Manager and then go to SQL Server Network Configuration > Protocols for MSSQLServer > TCP/IP.
Make sure TCP/IP is enabled and in the IP Addresses tab, make sure that the IP that the server resolves to when pinging is the same one here. That fixed this error for me.
I just ran into this and fixed it by doing 2 things:
Granting read/write servicePrincipalName permissions to the service account using ADSI Edit, as described in https://support.microsoft.com/en-us/kb/811889
Removing the SPNs that previously existed on the SQL Server computer account (as opposed to the service account) using
setspn -D MSSQLSvc/HOSTNAME.domain.name.com:1234 HOSTNAME
where 1234 was the port number used by the instance (mine was not a default instance).
This is usually due to missing, incorrect or duplicated Service Principle Names (SPNs)
Steps to resolve:
Confirm what AD account SQL Server is using
Run the following command in Powershell or CMD in administrator mode (service account should not contain the domain)
setspn -L <ServiceAccountName> | Select-String <ServerName> | select line
Make sure the returned output contains an SPN which is fully qualified, no fully qualified, with a port and without a port.
Expected Output:
Registered ServicePrincipalNames for CN=<ServiceAccountName>,OU=CSN Service Accounts,DC=<Domain>,DC=com:
MSSQLSvc/<ServerName>.<domain>.com:1433
MSSQLSvc/<ServerName>:1433
MSSQLSvc/<ServerName>.<domain>.com
MSSQLSvc/<ServerName>
If you don't see all of the above, run the following command in PowerShell or CMD in admin mode (make sure to change the port if you don't use default 1433)
SETSPN -S MSSQLSvc/<ServerName> <Domain>\<ServiceAccountName>
SETSPN -S MSSQLSvc/<ServerName>.<Domain> <Domain>\<ServiceAccountName>
SETSPN -S MSSQLSvc/<ServerName>:1433 <Domain>\<ServiceAccountName>
SETSPN -S MSSQLSvc/<ServerName>.<Domain>:1433 <Domain>\<ServiceAccountName>
Once above is complete it normally takes a few minutes for DNS propagation
Also, if you get a message about duplicate SPNs found, you may want to delete them and recreate them
The issue seems to be a windows credentials issue. I was getting the same error on my work laptop with a VPN. I am supposedly logged in as my Domain/Username, which is what I use successfully when connecting directly but as soon as I move to a VPN with another connection I receive this error. I thought it was a DNS issue as I could ping the server but it turns out I needed to run SMSS explicitly as my user from Command prompt.
e.g
runas /netonly /user:YourDoman\YourUsername "C:\Program Files (x86)\Microsoft SQL Server Management Studio 18\Common7\IDE\Ssms.exe"
Login to both your SQL Box and your client and type:
ipconfig /flushdns
nbtstat -R
If that doesn't work, renew your DHCP on your client machine... This work for 2 PCs in our office.
Check your clock matches between the client and server.
When I had this error intermittently, none of the above answers worked, then we found the time had drifted on some of our servers, once they were synced again the error went away. Search for w32tm or NTP to see how to automatically sync the time on Windows.
In my case, restarting SQL Server 2014 (on my development server) fixed the issue.
I had this problem when accessing the web application. It might be due to i have changed a windows password recently.
This issue got resolved when i have updated the password for the app pool where i have hosted the web application.
I was testing out IPv6 on a cluster of PC's in an isolated network and ran into this issue when I reverted back yo IPv4. I had been play in the active directory, DNS and DHCP so have no idea what I prodded to break the Kerberos setup.
I retested the connection outside of my software with this useful tip to connect remote connectivity I found.
https://blogs.msdn.microsoft.com/steverac/2010/12/13/test-remote-sql-connectivity-easily/
then after a brief search found this on the Microsoft website
https://support.microsoft.com/en-gb/help/811889/how-to-troubleshoot-the-cannot-generate-sspi-context-error-message.
run the tool on the SQL server see if there are any issue
if the status says error then hit the fix button that appears.
This resolved the problem for me.
In my situation I was trying to use Integrated Security to connect from a PC to SQL Server on another PC on a network without a domain. On both PCs, I was signing in to Windows with the same Microsoft account. I switched to a local account on both PCs and SQL Server now connects successfully.
I had the same issue, but locking, and unlocking the machine worked for me. Sometimes, firewall issues will give errors.
I am not sure it will work for you or not, just sharing my experience.
This Microsoft Tool is like Magic. Run it, connect it to the SQL server, and click Fix
The old version linked here worked on SQL server 2017.
Kerberos Configuration Manager for SQL Server
https://www.microsoft.com/en-us/download/details.aspx?id=39046
Since I landed here when looking for a solution to my own problem, I'll share my solution here, in case others land here as well.
I was connecting fine to SQL Server until my machine was moved to another office on another domain. Then, after the switch, I was getting this error regarding the target principal name. What fixed it was connecting using a fully qualified name such as: server.domain.com. And actually, once I connected to the first server that way, I could connect to other servers using just the server name (without the full qualification), but your mileage may vary.
In my Case since I was working in my development environment, someone had shut down the Domain Controller and Windows Credentials couldn't be authenticated. After turning on the Domain Controller, the error disappeared and everything worked just fine.
In case anyone is wondering, I untangled the MS terminology:
Target = (active directory) target
Active directory target = target server running the domain controller
Domain controller = server that verifies your login information
Principal name = your windows username
SSPI = security support provider interface
Security support provider interface = software interface that manages "authenticated
communications" and allows SSPs like TLS to allow SSL, among others
SSP = security support provider (SSPI implementation)
TLS/SSL = you should already know this
= Can't verify your password.
I ran into this today and wanted to share my fix, since this one is simply overlooked and easy to fix.
We manage our own rDNS and recently redid our server naming scheme. As part of that, we should have updated our rDNS and forgot to do this.
A ping turned up the correct hostname, but a ping -a returned the wrong hostname.
Easy fix: change the rDNS, do an ipconfig /flushdns, wait 30 seconds (just something I do), do another ping -a , see it resolving the correct hostname, connect ... profit.
I ran into a variant of this issue, here were the characteristics:
User was able to successfully connect to a named instance, for example, connections to Server\Instance were successful
User was unable to connect to the default instance, for example, connections to Server failed with the OP's screenshot regarding SSPI
User was unable to connect default instance with fully qualified name, for example, connections to Server.domain.com failed (timeout)
User was unable to connect IP address without named instance, for example, connections to 192.168.1.134 failed
Other users not on the domain (for example, users who VPN to the network) but using domain credentials were able to successfully connect to the default instance and IP address
So after many headaches of trying to figure out why this single user couldn't connect, here are the steps we took to fix the situation:
Take a look at the server in the SPN list using
setspn -l Server
a. In our case, it said Server.domain.com
Add an entry to the hosts file located in C:\Windows\System32\drivers\etc\hosts (run Notepad as Administrator to alter this file). The entry we added was
Server.domain.com Server
After this, we were able to successfully connect via SSMS to the default instance.
I ran into a new one for this: SQL 2012 hosted on Server 2012.
Was tasked to create a cluster for SQL AlwaysOn.
Cluster was created everyone got the SSPI message.
To fix the problems ran following command:
setspn -D MSSQLSvc/SERVER_FQNName:1433 DomainNamerunningSQLService
DomainNamerunningSQLService == the domain account I set for SQL
I needed a Domain Administrator to run the command. Only one server in the cluster had issues.
Then restarted SQL. To my surprise I was able to connect.
I was trying to connect to a VM running SQL Server 2015 from my laptop in a Visual Studio 2015 Console App. I run my app the night before and it is fine. In the morning I try to debug the app and I get this error. I tried ipconfig/flush and release + renew and a a bunch of other garbage, but in the end...
Restart your VM and restart the client. That fixed it for me. I should have known, restart works every time.
I had this problem on my sql server. I setspn -D mssqlsvc\Hostname.domainname Hostname then stoped and started my SQL server service.
I am thinking that just stopping and starting my sql service would have done it.
I have tried all the solutions here and none of them have worked yet. A workaround that is working is to Click Connect, enter the server name, select Options, Connection Properties tab. Set the "Network protocol" to "Named Pipes". This allows users to remote connect using their network credentials. I'll post an update when I get a fix.
In my case, the problem was setting up DNS on the wifi. I removed the settings, and left them empty, and worked.
Make sure that "Named Pipes" are enabled from "SQL Server Configuration Manager". This worked for me.
Open "SQL Server Configuration Manager".
Expand "SQL Server Network Configuration", from the list on the left.
Select "Protocols for [Your Instance Name]".
Right click on "Named Pipes", from the list on the right.
Select "Enable"
Restart your Instance service.
Another niche to this issue caused by network connections. I connect via windows VPN client and this issue popped up when I switched from Wifi to a wired connection. The fix for my situation was to manually adjust the adapter metric.
In powershell use Get-NetIPInterface to see all of the metric values. The lower numbers are lower cost and so they are preferred by windows. I switched the ethernet and VPN and the credentials got where they needed to be for SSMS to be happy.
To configure the Automatic Metric feature:
In Control Panel, double-click Network Connections.
Right-click a network interface, and then select Properties.
Click Internet Protocol (TCP/IP), and then select Properties.
On the General tab, select Advanced.
To specify a metric, on the IP Settings tab, select to clear the Automatic metric check box, and then enter the metric that you want in the Interface Metric field.
Source:
https://learn.microsoft.com/en-us/troubleshoot/windows-server/networking/automatic-metric-for-ipv4-routes
I have been unable to solve this in a satisfactory manner. If I log in from a client as a local Windows account, Windows authentication works without a glitch. If I however attempt to log in from a Microsoft account (which is preferable for me because of the synchronization features), I get the "incorrect principal" message. No record of the failed login appears in the MS-SQL logs, implying that the failure occurs very early.
I am working on SQL Server 2008 R2 Express, when I am using SQL Server debugging feature from client pc, this error occurs:
The EXECUTE permission was denied on the object 'sp_enable_sql_debug', database 'mssqlsystemresource', schema 'sys'. (Microsoft SQL Server, Error: 229)
My user name is 'HALI' and permission is assigned to me is 'public' and 'db_Owner',
now after this error I have assigned all permissions available. And all server roles.
Now at this time I got new error message,
Error HRESULT E_FAIL has been returned from a call to a COM component. (mscorlib)
Now what the solution would be for this error.
I am not sure if disabling firewall is enough. if the user has sysadmin permissions and still getting this error means client is not able to connect to server in debugging mode. check this TCP and UDP ports are correctly open.
SQL remote debugging configuration
EDIT:1
I am sure you must have also googled a lot and tried to find out about the error messages.
What I have found so far is the Error in the OP you mentioned is misleading and from that error, we cannot tell what exactly is wrong or what to look next. But as you replied in the comments, after making changes to enable Remote Debugger; the mentioned error is more clear and I feel that proper permission is still an issue. Plenty of other suggestion you also might have tried so far, but if you haven’t done this, let's try one more time:
In one of the comments I mentioned you to try login using the windows user.
Now Keep the settings you already did for TCP ports, Firewall Exception, etc… explained in the above link.
you have windows 2012 server where you installed DB server. and windows 8 Prof where you have DB client and you connecting through SSMS. Now I believe both machines are in the same domain. Let’s say domain XYZ. You must have windows login on server, let’s say it is “XYZ\HALI” using which you can login to the Windows Server. log in and make sure that login also exists in SQL SERVER with sysadmin permission. Because client machine is also in same domain make sure you have logged in into the client machine using same user “XYZ\HALI”. Now start SSMS and choose windows authentication instead of SQL SERVER authentication. Try to start Debugging T-SQL code now.
if client and server machines are not in the same domain then we have to register server name on client machine as Linked Server, impersonate the login/user as local and then try the debugging.
Edit:2
I encountered this problem after generating a SQL 2012 script and running it in a SQL 2008 R2 database.
After some research, I found out that my target SQL 2008 R2 was running on a 32-bit OS which supports a file of up to 2GB in size. So I saved the script as C:\myScript.sql and successfully executed it in a command prompt with these steps:
Open a command prompt window.
In the command prompt window, type:
sqlcmd -S myServer\instanceName –U yourUserName –P yourPassword -i C:\myScript.sql
where myServer\instanceName is the instance name. Supply the user name and password for SQL server login, and finally the path of the file as indicated.
Press Enter.
References:
sqlcmd Utility | Microsoft Docs
Use the sqlcmd Utility | Microsoft Docs
The few times I've run across that error, it's always been firewall related. Are you working on a remote server, or your local machine? (Parenthetically, be careful assigning all possible roles. Some of them are ones you absolutely don't want. The one you need for SQL debugging is sysadmin - try disabling the rest of the roles you checked off and just assigning that one.)
Debugging procs is always a pain. This ASP.NET post helped me out substantially awhile ago.
I have a desktop, and a Laptop. The Desktop has Windows 7 64-bit and the Laptop has Vista Ultimate 32-bit. On both machines I have SQL Server 2008 Standard installed.
On the laptop, I open SQL Management Studio and try to connect to the SQL Server on the desktop. It times out.
With SQL Server Config Manager I Enabled TCP/IP and Named Pipes for the client protocols.
In SQL Management Studio, I right clicked on the Database Engine, went to properties, and allowed remote connections. I also created a sql server login named "testuser" and a password. I then added that user as a login for my database and made them the database owner.
I could not figure out how to allow connection to my db throw the windows firewall, so I turned it off.
What am I missing? I made the same changes on my laptop, and I can connect from the Desktop to the Laptop in Management Studio?
Do you have a checklist?
Thanks.
UPDATE:
I turned off antivirus. Ran NetStat -a and the listener is listening.
If your login attempt takes about 30 seconds to timeout, then it's some kind of network connectivity problem (or SQL isn't listening properly). A permissions problem would come back after a few seconds, so the long wait says it's connection-related.
If you run "NETSTAT -a" on the server, so you see SQL Server listening on port 1433? If not, then maybe the SQL TCP Listener isn't configured properly on the server - there should be events in the Windows Event log to this effect when the SQL Service starts up.
Please edit your question with the results and we can go from there.
Try using Telnet to see if the laptop can see the desktop via port 1433.
Open a command prompt on the laptop and enter:
telnet DesktopNameOrIPAddress 1433
Press Enter, and you should either see a connection failed error, or a blank screen. If you get the blank screen, the connection was established. Press CTRL-] to break out of it, then type "quit" and enter to quit.
If the connection failed, attempt to resolve the general network issue with port 1433 before bothering to use the SQL Server tools.
If you have any other anti-virus software running, it may also have a firewall built in. I know that McAfee does, for instance. Check for that.
You've probably already thought of this, but have you checked that the server is configured to allow Mixed Mode Authentication? I have not had access to 2008, but I seem to remember that at least one of the previous versions was configured to disallow sql logins by default.
I assume you already did what you have to do on the OS level. Or maybe tried to link the server to see if you can actually traverse your network. Let me suggest a quick test. Check if you can actually test connectivity by creating a Universal Data Link. In case you don't know how to do this, create a new text file in your desktop (or anywhere) and change the .txt file extension to .udl; then just open it. See if your other server is "viewable" over the network (Don't forget to change the Provider to OLE DB Provider for SQL Server).
Is the SQL Browser Service running on the server you are trying to access? (By default this is disabled, and you'll need that to access SQL Server remotely)