Could someone help me figure out why I can't access the Rally Lookback Api? I can access the webservice just fine.
For example, when I type this into the browser:
https://rally1.rallydev.com/analytics/v2.0/service/rally/workspace/12345/artifact/3563764.js
(using my server name, the correct workspace and a valid ObjectID), I get the HTTP 404 not found error. Is there a specific reason for this? I've tried several different types of queries, and nothing works.
Thanks!
There is actually an endpoint for the LBAPI that is similar to the WSAPI artifact endpoint. It looks like:
https://rally1.rallydev.com/analytics/v2.0/service/rally/workspace/12345/artifact/67890/snapshot/query.js
(Note the oid between /artifact/ and /snapshot/.) You still have to use a find clause though, to filter which snapshots from that specific artifact you want.
Lookback API works a bit different from WSAPI - there aren't artifact-ObjectID specific endpoints such as the above. Instead, you would want to do a find query:
GET:
https://rally1.rallydev.com/analytics/v2.0/service/rally/workspace/12345678910/artifact/snapshot/query.js?find={"ObjectID":12345678920}&fields=["_ValidFrom","_ValidTo","ObjectID","State"]&start=0&pagesize=1
Alternatively, using a POST:
POST against:
URI: https://rally1.rallydev.com/analytics/v2.0/service/rally/workspace/12345678910/artifact/snapshot/query.js
POST data:
{
"find": { "ObjectID": 12345678920},
"fields": ["_ValidFrom", "_ValidTo", "ObjectID", "State"],
"start": 0,
"pagesize": 1
}
There are some good examples of this, along with a query "scratchpad" that you can use to test queries in your browser, in the LookbackAPI docs here:
https://rally1.rallydev.com/analytics/doc/#/manual
A Rally login is required to use query samples.
Both MarkW and Joel give some great responses and pointers to where you can get more information about the Lookback API. However, the real answer to your question is that the Lookback API is currently only available to SaaS customers. So, since you have Rally inside your datacenter, you won't be able to use the Lookback API until the ability to deploy Lookback to on premise customers is released.
Related
I am having trouble using Microsoft Face API. Below is my sample request:
curl -v -X POST "https://westus.api.cognitive.microsoft.com/face/v1.0/detect?returnFaceId=true&returnFaceLandmarks=false&returnFaceAttributes=age,gender" -H "Content-Type: application/json" -H "Ocp-Apim-Subscription-Key: 1xxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxd" --data-ascii "{\"url\":\"http://www.mrbeantvseries.co.uk/bean3.jpg\"}"
I use the subscription id from my cognitive services account and I got below response:
{
"error": {
"code": "Unspecified",
"message": "Access denied due to invalid subscription key. Make sure you are subscribed to an API you are trying to call and provide the right key."
}
}
Not sure if I've missed out anything there. Can someone help me on this? Very much appreciated.
I ran into the same problem. I read the API documentation and it states the following.
You must use the same region in your REST API call as you used to obtain your subscription keys.
First, you must find the location of your subscription.
In order to find the location of your subscription region, you must go to Cognitive Services -> Properties under the Label Location, you will find your subscription region.
See below.
Second you must find the correct endpoint to make the call to.
For example, if I want to make a call to the Computer Vision API,
My location is East US, I will use either key 1 or 2, then I will use the following endpoint
East US - https://eastus.api.cognitive.microsoft.com/face/v1.0/detect
You will now be able to have access to the API.
It appears that you've entered your Azure subscription ID instead?
In the Azure portal, you can find the API key under 'Keys', shown below:
It will be a 32-digit hexadecimal number, no hyphens.
I had faced the same issue, it seems like there is some problem with the keys generated newly. To fix this you can actually add your endpoint as well, when you create the object for IFaceServiceClient. You can see the code below.
private readonly IFaceServiceClient faceServiceClient = new FaceServiceClient("your key", "Your endpoint");
CesarB is correct. You must create a Resource of Cognitive Service in Azure first and then get the subscription key from it.
the region is not always 'westus', it really depends on what region you select when you created the resource. You can also check it on the endpoint of overview of the Resource
I ran into a similar problem. I figure it might be helpful to some people, so I am posting it here. (btw Azure support points me to this post here)
I was trying to run through the sample file for ImageSearch of Azure. I was refering to these pages:
https://learn.microsoft.com/en-us/azure/cognitive-services/bing-image-search/quickstarts/csharp
https://learn.microsoft.com/en-us/azure/cognitive-services/bing-image-search/quickstarts/client-libraries?tabs=visualstudio&pivots=programming-language-csharp
https://github.com/Azure-Samples/cognitive-services-dotnet-sdk-samples/blob/master/BingSearchv7/BingImageSearch/quickstart/bing-image-search-quickstart-csharp.cs
I was receiving a mixture of 404 Not Found error & 401 unauthorized error when send requests to the Bing Search resource, using
Microsoft.Azure.CognitiveServices.Search.ImageSearch. I figure it must be something wrong with either my credentials or my endpoints.
After struggling with it for hours, reading through posts and talking to Azure support member, I finally find the problems:
The base Uri Endpoint I was assigned on the Azure Keys & Endpoints webpage is incomplete. (https://api.bing.microsoft.com/)
The base Uri Endpoint on the sample tutorial pages was outdated because of the 2020.10.30 transition between Cognitive Services to Bing Search Services. (https://api.cognitive.microsoft.com/bing/v7.0/images/search)
As of 2021.09.22, the correct global base Uri Endpoint for Bing Image Search is:
https://api.bing.microsoft.com/v7.0/images/search
Hope this would be helpful to anyone and save mankind some time.
Endpoint
https://westeurope.api.cognitive.microsoft.com/face/v1.0
Endpoint and the subscription key must be consistent.
look at Microsoft Overview for this info!
UPDATE: Please, if anyone can help: Google is waiting for inputs and examples of this problem on their bug tracking tool. If you have reproducible steps for this issue, please share them on: https://code.google.com/p/googleappengine/issues/detail?id=10937
I'm trying to fetch data from the StackExchange API using a Google App Engine backend. As you may know, some of StackExchange's APIs are site-specific, requiring developers to run queries against every site the user is registered in.
So, here's my backend code for fetching timeline data from these sites. The feed_info_site variable holds the StackExchange site name (such as 'security', 'serverfault', etc.).
data = json.loads(urllib.urlopen("%sme/timeline?%s" %
(self.API_BASE_URL, urllib.urlencode({"pagesize": 100,
"fromdate": se_since_timestamp, "filter": "!9WWBR
(nmw", "site": feed_info_site, "access_token":
decrypt(self.API_ACCESS_TOKEN_SECRET, self.access_token), "key":
self.API_APP_KEY}))).read())
for item in data['items']:
... # code for parsing timeline items
When running this query on all sites except Stack Overflow, everything works OK. What's weird is, when the feed_info_site variable is set to 'stackoverflow', I get the following error from Google App Engine:
HTTPException: Invalid and/or missing SSL certificate for URL:
https://api.stackexchange.com/2.2/me/timeline?
filter=%219WWBR%28nmw&access_token=
<ACCESS_TOKEN_REMOVED>&fromdate=1&pagesize=100&key=
<API_KEY_REMOVED>&site=stackoverflow
Of course, if I run the same query in Safari, I get the JSON results I'm expecting from the API. So the problem really lies in Google's URLfetch service. I found several topics here on Stack Overflow related to similar HTTPS/SSL exceptions, but no accepted answer solved my problems. I tried removing cacerts.txt files. I also tried making the call with validate_certificate=False, with no success.
I think the problem is not strictly related to HTTPS/SSL. If so, how would you explain that changing a single API parameter would make the request to fail?
Wait for the next update to the app engine (scheduled one soon) then update.
Replace browserid.org/verify with another service (verifier.loogin.persona.org/verify is a good service hosted by Mozilla what could be used)
Make sure cacerts.txt doesnt exist (looks like you have sorted but just in-case :-) )
Attempt again
Good luck!
-Brendan
I was facing the same error, google has updated the app engine now, error resolved, please check the updated docs.
I am looking at this API: https://developers.google.com/admin-sdk/groups-settings/v1/reference/groups/get
However, when I try the test at the bottom, it always returns 400 Bad request. I have tried using the Google group email address (without the #gmail.com and with the #gmail.com) for several groups I am in.
How do you find the groupUniqueId for a Google group?
I had the problem yesterday and 'think' I undertood it:
I use the PHP SDK and had to use groupssettings API.
When I executed my query, the PHP answer was something such: "incorrect json format".
Still in my API, I had to FORCE the JSON to be used, by adding optional parameter: alt=json
Then, The query worked.
Until now, this is the only Google API where I had to specify this.
What I suspect is the "Try It" feature to use json, and because the API does NOT returns json by default, it just fails. Too bad there is no way to force json there.
Is there a way, or is there a web site that can run test cases against another REST server?
On the "tester" website you'd say: do this PUT on this URI, using this authentication mechanism, using this JSON string, with this header, etc. If the result contains XYZ then consider it a success, otherwise consider it a failure...
Other users should be able to add new test cases and edit existing test cases.
I wanted to check before writing a combination of wiki, google app engine, selenium, etc.
Thanks.
Its not what you probably search for, but still probably worth the check: SimpleTestIO
That project's goal is to be easier than Selenium and easy to use. In the future will be probably paid.
Disclaimer: I am not connected with the page, just found it while researching for Selenium alternatives
Apparently I do not need a 'Maps API key' to use the 'Google Geocoding API' according to:
http://code.google.com/apis/maps/documentation/geocoding/index.html
However, I obtain this:
{
"status": "REQUEST_DENIED",
"results": [ ]
}
Does this mean that my IP is blocked? What can I do to overcome this?
Until the end of 2014, a common source of this error was omitting the mandatory sensor parameter from the request, as below. However since then this is no longer required:
The sensor Parameter
The Google Maps API previously required that you include the sensor parameter to indicate whether your application used a sensor to determine the user's location. This parameter is no longer required.
Did you specify the sensor parameter on the request?
"REQUEST_DENIED" indicates that your request was denied, generally because of lack of a sensor parameter.
sensor (required) — Indicates whether or not the geocoding request comes from a device with a location sensor. This value must be either true or false
Remove the API key parameter and its value.
eg. https://maps.googleapis.com/maps/api/geocode/json?address=[YOUR ADDRESS]&sensor=true
I found that in my case, calling to the service without secure protocol (meaning: http), after adding the key=API_KEY, cause this issue.
Changing to https solved it.
I've noticed that you also get REQUEST_DENIED for some addresses if you don't properly URL encode your address. For example, in
123 Main St #B, Mytown, CA 94110
the '#' character needs to be encoded as %23
For those who are looking this page in 2017 or beyond, like me
Sensor is not required anymore, I tried and got the error:
SensorNotRequired
I just needed to activate my Google Maps Geocoding API, that seems to be necessary nowadays.
Hope it helps someone like me.
If you just copy&paste the example URL that Google gives in their website
http://maps.google.com/maps/api/geocode/json?address=1600+Amphitheatre+Parkway,+Mountain+View,+CA&sensor=true_or_false
it will fail because of the wrong parameter of the sensor. You should change it to true or false and not the one that they wrote.
Maybe is the error that you have had, like it happened to me...
I had this problem and I realized that I was assuming that Geocoding came with the JS maps API. However, it is a separate API which I hadn't enabled in the cloud console. Enabling it fixed it right away.
I got this problem as well using the drupal 7 Location module. Autofilling all empty locations resulted in this error. Executing one of the requests to the location api manually resulted in this error in the returned JSON:
"Browser API keys cannot have referer restrictions when used with this API."
Resolving the problem then was easy: create a new key without any restrictions and use it only for Geocoding.
Note for those new to google api keys: by restrictions they mean limiting requests using an api key to specific domains / subdomains. (eg. only request from http://yourdomain.com are allowed).
It's suck Google don't let you that your service is not enabled by this account. Try to enable it first.
Go here https://console.developers.google.com/project
and create a new project with place service activated this may solve your problem.
If you not have configured a billing account with your credit card, the API do not work. The Google is now very hungry for money and not open more your products "free". Obviously that him offer a free limited access number of consults and over this acces, the billing is very high.
https://cloud.google.com/maps-platform/pricing
As you say, this can mean that your IP address has been blocked. I'd make sure that you specify the key parameter on the query string for the Geocoding API request.
https://maps.googleapis.com/maps/api/geocode/xml?sensor=false&address=Placename&key=XXxxxXXxXxxxxXXxx
Also make sure that if you've set up IP Address Restrictions within the Developer Console, you've allowed the correct IP address, just click the project within the list and you'll see the allowed IPs.
If you're still running into issues, you might want to look into printing out the values of the status and error_message elements from the response from Google, you'll see something like this:
REQUEST_DENIED - This IP, site or mobile application is not authorized to use this API key. Request received from IP address 123.4.5.678, with empty referer
If it doesn't mention an IP address restriction, it may well give you enough information about the problem to Google a fix.
For anyone struggling with this issue, I just found out that the Geocoding API can't be used with API keys that have referrer restrictions. Just remove all your referrer restrictions and you should be good.
If you're using any other APIs that do allow keys with referrer restrictions (like the Maps JS API), it's probably best to create a 2nd key with no restrictions to use exclusively for geocoding, because other APIs might display your key publicly and someone else could start using it on their own site.
Google is returning a very useful error message, which helps to correct the issue!
Dim Request As New XMLHTTP30
Dim Results As New DOMDocument30
Dim StatusNode As IXMLDOMNode
Request.Open "GET", "https://maps.googleapis.com/maps/api/geocode/xml?" _
& "&address=xxx", False
Request.Send
Results.LoadXML Request.responseText
Set StatusNode = Results.SelectSingleNode("//status")
Select Case UCase(StatusNode.Text)
Case "REQUEST_DENIED"
Debug.Print StatusNode.NextSibling.nodeTypedValue
...
Error Message Examples
Message 1:
Requests to this API must be over SSL. Load the API with "https://"
instead of "http://".
Message 2:
Server denied the request: You must use an API key to authenticate each request to Google Maps Platform APIs. For additional information, please ...
If none of given solutions fixed the error, the issue probably about Google Cloud Billing settings. You must enable Billing on the Google Cloud Project at billing/enable.
Learn more
{
"error_message" : "You must enable Billing on the Google Cloud Project at https://console.cloud.google.com/project/_/billing/enable Learn more at https://developers.google.com/maps/gmp-get-started",
"results" : [],
"status" : "REQUEST_DENIED"
}
I created another Credential(New API) only for Geocoding, with "Key restrictions" 'None' and "API restrictions" 'Restrict key'
Selected APIs:
Directions API
Geocoding API
Geolocation API
Maps JavaScript API
Places API
and then it's worked.
I just ENABLED my geocoding API, geolocation API and places API on my google cloud platform (where I had generated my API key I was using) and it worked.