I've written a check for our Nagios to find offline AccessPoints. This one check will test all 400 APs at one turn, which is also very efficient, but there is one drawback: If some of the APs will be offline for a while and i know, there is no way to get rid of the critical-error in Nagios. If i acknowledge the service to a time when i expect the APs o work again, i will not see other APs fail.
Now, i wonder if there is a way to check all APs in one turn, but to create separate check-results in Nagios, so i could only ACK the ones which i know they're out-of-order for a while. I don't think do a check for each AP is a solution here.
A check for each AP is the easiest and cleanest way to do this. Then you can have a metacheck that alerts on the conditions you give to it.
Another approach is using a temp file to store the current status and a config file where you pseudo-ack the APs. the meta-check would only need to compare those two files.
In our Icinga (nagios-fork) installation we have something on these lines. I wrote a php frontend for it, the action note link brings me to a page where I can edit graphically the parameters for the checks.
Related
I have multiple databases in my local which I do not need. Can I run a curl script or a REST API command where I can delete the database, it's servers and all of the forests so that I can use gradle to just deploy them again?
I have tried to manually delete the server first, then the database and then the forests. This is a lengthy process.
I want a single command to do the whole job for me instead of manually having to delete the components one by one which is possible through the admin interface.
Wagner Michael has a fair point in his comment. If you already used (ml-)Gradle to create servers and databases, why not use its mlUndeploy -Pconfirm=true task to get rid of them? You could potentially even use a fake project, with stub configs to get rid of a fairly random set of databases and servers, though that still takes some manual work.
By far the quickest way to reset your entire MarkLogic, is to stop it, and wipe its data directory. This SO question gives instructions on how to do it, as part of a solution to recover when you lost your admin password:
https://stackoverflow.com/a/27803923/918496
HTH!
I'm wondering is there a way to recognize the OfflineComamd is being executed or internal flag or something to represent this command has been passed or mark it has been executed successfully. I have issue in recognizing the command is passed or not with unstable internet. I keep retrieve the records from database and comparing each and every time to see this has been passed or not. But due to the flow of my application, I'm finding it very difficult to avoid duplicates.IS there any automatic process to make sure commands executed automatically or something else?
2nd question, I can use UITimer to check isOffline() to make sure internet is connected or not on the forms. Is there something equivalent on server page or where queries is written to see internet is disconnected or not. When the control moved to queries and internet is disconnected I see the dialog open from form page being frozen for unlimited time and will not end. I have to close and re-open the app to continue the synchronization process.At the same time I cannot set a timeout for dialog because I'm not sure how long it will take the complete the Synchronization process. Please advise.
Extending on the same topic but I have created a new issue just to give more clarity on my questions.
executeOfflineCommand skips a command while executing from storage on Android
There is no way to know if a connection will stay stable as it requires knowledge of the future. You can work like transaction services do where the server side processes an offline command as a transaction using the approach of 2-phase commit.
In this approach you have an algorithm similar to this:
Client sends command to server
Server returns a special unique ID for the command
Client asks server to perform the unique id
Server acknowledges that the command was performed
If the first 2 stages didn't complete you just do that again. The worst thing that could happen is some orphan commands on the server.
If the 3rd option didn't complete you just do it again. The server knows whether it processed the command and will just acknowledge it if it was already processed.
I have a gatling test for an application that will answer a survey and upon answering this survey, the application will identify possible answers that may pose a risk and create what we call riskareas. These riskareas are normally created in the background as soon as the survey answering is finished. My question is I have a gatling test with ten users who will go and answer the survey and logout, I used recorder to record the test; now after these ten users are finished I do not see any riskareas being created in the application. Am I missing something--should the survey be really answered by gatling (like it does in selenium) user or is it just the urls that the gatling test will touch ?
I am new to gatling please help.
Gatling should be indistinguishable from a user in a web browser (or Selenium) as far as the server is concerned, so the end result should be exactly the same as if you'd gone through the process yourself. However, writing a Gatling script is a little more work than writing a Selenium script.
For performance reasons, Gatling operates at a lower level than Selenium. Gatling works with the actual data that is sent and received from the server (i.e, the actual GETs and POSTs sent to the server), rather than with user-level interactions (such as clicking links and filling forms).
The recorder will generally produce a relaitvely "dumb" script. It records the exact data that was sent to the server, and makes no attempt to account for things that may change from run to run. For example, the web application you are testing might have hidden form fields that contain session information, or the link addresses might contain a unique identifier or a session id.
This means that your script may not be doing what you think it's doing.
To debug the script, the first thing to do is to add checks on each of the requests, to validate that you are getting the response you expect (for example, check that when you submit page 1 of the survey, you are taken to page 2 - check for something that you'd only expect to find on page 2, like a specific question).
Once you know which requests are failing, look at what data was sent with the request, and try to figure out where it came from. You will probably find that there are session ids, view state, or similar, that must be extracted from the previous page.
It will help to enable request and response logging, as per the documentation.
To simplify testing of web apps, we wrote some helper functions to allow tests to be written in a more Selenium-like way. Once you understand what your application is doing, you may find that it simplifies scripting for you too. However, understanding why your current script doesn't work the way you expect should be your first step.
I coded a simple scraper , who's job is to go on several different pages of a site. Do some parsing , call some URL's that are otherwise called via AJAX , and store the data in a database.
Trouble is , that sometimes my ip is blocked after my scraper executes. What steps can I take so that my ip does not get blocked? Are there any recommended practices? I have added a 5 second gap between requests to almost no effect. The site is medium-big(need to scrape several URLs)and my internet connection slow, so the script runs for over an hour. Would being on a faster net connection(like on a hosting service) help ?
Basically I want to code a well behaved bot.
lastly I am not POST'ing or spamming .
Edit: I think I'll break my script into 4-5 parts and run them at different times of the day.
You could use rotating proxies, but that wouldn't be a very well behaved bot. Have you looked at the site's robots.txt?
Write your bot so that it is more polite, i.e. don't sequentially fetch everything, but add delays in strategic places.
Following guidelines set in robots.txt is a good first step. There are tools such as import.io and morph.io. There are also packages/ plugins for servers. For example x-ray; a node.js which have options to assist in quickly writing responsible scrapers e.g. throttle, delays, max connections etc.
I want to be able to copy the file I have which comes in as XML into a new folder location on the server. Essentially I want to hold a back up of the input files in a new folder.
What I have done so far is try to follow what has been said on this forum post - link text
At first I tried the last method which didn't do anything (file renaming while reading). So I tried one of the other options and altered the orchestration and put a Send shape just after the Receive shape. So the same message that comes in is sent out to the logical port. I export the MSI, and I have created a Send Port in the Admin console which has been set to point to my copy location. It copies the file but it continues to create one every second. The Event Viewer also reports warnings saying "The file exists". I have set the Copy Mode of the port to 'overwrite' and 'Create New', both are not working.
I have looked on Google but nothing helps - BTW I support BizTalk but I have no idea how pipelines, ports work. So any help would be appreciated.
thanks for the quick responses.
As David has suggested I want to be able to track the message off the wire before BizTalk does any processing with it.
I have tried to the CodePlex link that Ben supplied and its points to 'Atomic-Scope's BizTalk Message Archiving Pipeline Component' which looks like my client will have to pay for. I have downloaded the trial and will see if I have any luck.
David - I agree that the orchestration should represent the business flow and making a copy of a file isn't part of the business process. I just assumed when I started tinkering around I could do it myself in the orchestration as suggested on the link I posted.
I'd also rather not rely on the BizTalk tracking within the message box database as I suppose the tracked messages will need to be pruned on a regular basis. Is that correct or am I talking nonsense?
However is there a way I can do what Atomic-Scope have done which may be cheaper?
**Hi again, I have figured it out from David's original post as indicated I also created a Send port which just has a "Filter" expression like - BTS.ReceivePortName == ReceivePortName
Thanks all**
As the post you linked to suggests there are several ways of achieving this sort of result.
The first question is: What do you need to track?
It sounds like there are two possible answers to that question in your case, which I'll address seperately.
You need to track the message as received off the wire before BizTalk touches it
This scenario often arises where you need to be able to prove that your BizTalk solution is not the source of any message corruption or degradation being seen in messages.
There are two common approaches to this:
Use a pipeline component such as the one as Ben Runchey suggests
There is another example of a pipeline component for archiving here on codebetter.com. It looks good - just be careful if you use other components, and where you place this component, that you are still following BizTalk streaming model proper practices. BizTalk pipelines are all forwardonly streaming, meaning that your stream is readonly once, and all the work on them the happens in an eventing manner.
This is a good approach, but with the following caveats:
You need to be careful about the streaming employed within the pipeline component
You are not actually tracking the on the wire message - what your pipeline actually sees is the message after it has gone through the BizTalk adapter (e.g. HTTP adapter, File etc...)
Rely upon BizTalk's out of the box tracking
BizTalk automatically persists all messages to the message box database and if you turn on BizTalk tracking you can make BizTalk keep these messages around.
The main downside here is that enabling this tracking will result in some performance degradation on your server - depending on the exact scenario, this may not be a huge hit, but it can be signifigant.
You can track the message after it has gone through the initial receive pipeline
With this approach there are two main options, to use a pure messaging send port subscribing to the receive port, to use an orchestration send port.
I personally do not like the idea of using an orchestration send port. Orchestrations are generally best used to model the business flow needed. Unless this archiving is part of the business flow as understood by standard users, it could simply confuse what does what in your solution.
The approach I tend to use is to create a messaging send port in the BizTalk admin console that subscribes to your receive port. The send port will then just use a standard BizTalk file adapter, with a pass through pipeline.
I think you should look at the Biztalk Message Archiving pipeline component. You can find it on Codeplex (http://www.codeplex.com/btsmsgarchcomp).
You will have to create a new pipeline and deploy it to your biztalk group. Then update your receive pipeline to archive the file to a location that the host this receive location is running under has access to.