I am trying to create a script that will create another batch script. However this code will not run properly, immediately exiting as soon as the if statement is evaluated.
set yes=yes
pause
IF /I %yes% == yes (
ECHO REM Music>>mf.bat
ECHO FOR /f %%i in (C:\CopyToRoot\MusicFileAndLocation.txt) do set MusicFile=%%i>>mf.bat
)`
However if the second line in the if statement is removed the code executes without issue.
What am I doing wrong? is there something I am missing about the echo statement?
Perhaps:
#Echo Off
Set "yes=yes"
Pause
If /I "%yes%"=="yes" (
>"mf.bat" (
Echo #Echo Off
Echo Rem Music
Echo For /F "UseBackQ Delims=" %%%%A In ("C:\CopyToRoot\MusicFileAndLocation.txt"^) Do Set "MusicFile=%%%%A"
)
)
Double the percents and escape any internal closing parentheses.
You need to format the code block with a bit of effort, however, it is much simpler to get rid of the block and simply call a label. Also, the batch file will consume the % so you need to double them in order to redirect the string correctly to file.
#echo off
set yes=yes
pause
IF /I "%yes%"=="yes" call :final
goto :eof
:final
echo REM Music>mf.bat
echo FOR /f %%%%i in (C:\CopyToRoot\MusicFileAndLocation.txt) do set MusicFile=%%%%i>>mf.bat
Note I use single redirect on the first rem line to overwrite the file, else it will append each time you run the code, if that was the intention, simply do double redirect >>
I'm trying to make a reminder system within batch in which there are different lines of reminders. My batch program will write to different lines in a .txt file, but it isn't working. Could you please help and try to find the issues?
#echo off
echo Enter slot # for reminder
set /p n=
cls
echo Please type in the assignment name
set /p a=
echo ----------------------------------
echo Please type in the class
set /p c=
echo ----------------------------------
echo Please type in the date due
set /p d=
cls
if %n%==1 goto l1
if %n%==2 goto l2
if %n%==3 goto l3
if %n%==4 goto l4
if %n%==5 goto l5
if %n%==6 goto l6
:l1
echo Reminder for %c% Homework! %a%,%d% > Reminder.txt
:end
:l2
echo Reminder for %c% Homework! %a%,%d% >> Reminder.txt
:end
:l3
echo Reminder for %c% Homework! %a%,%d% >>> Reminder.txt
:end
:l4
echo Reminder for %c% Homework! %a%,%d% >>>> Reminder.txt
:end
:l5
echo Reminder for %c% Homework! %a%,%d% >>>>> Reminder.txt
:end
:l6
echo Reminder for %c% Homework! %a%,%d% >>>>>> Reminder.txt
:end
Hints to fix what you've got:
The > character won't let you write to specific lines, and there's no native support in Windows batch to do such a thing.
There are two operators that use the > character: >, which redirects output to a file (replacing any existing content), and >>, which appends (adds to the end of) a file.
You've got multiple instances of :end, but that's invalid. :end is a label, which is a unique reference to that point in the code. When you add more than one, some get ignored and you get undefined behaviors, which is bad.
It looks like you're trying to use :end to exit. Use goto :EOF for that. It jumps to the built-in label :EOF, short for End Of File.
You need to handle the case where n is none of the predefined values. Currently if someone entered 7 for n, your program would get to the logic after :l1 and run it, which is wrong. Put a goto :EOF there just in case.
How to approach solving this type of issue with batch:
The only way I can think of off the top of my head to modify a specific line is to iterate through all lines using a for /f loop, rewriting each line (to a temporary file) until you encounter the one you want to change, then write your new content instead of the existing content. Then when you're done iterating, you can replace the original file with that temporary file.
You would have to do this each time you wanted to change a new line. Batch is a really simple language that doesn't have useful constructs like arrays, or the many external tools that a shell scripting language like Bash would have. It's also got some really unsophisticated runtime evaluation.
Here's a partial solution that you can combine with a few lines from your code above to achieve what you want. It prompts you for a line number, then puts the content of the newContent variable (replace with your implementation) into the file at the specified line:
REM suppresses the echo of the commands in the program
#ECHO OFF
REM sets a feature that overcomes some of the weak runtime evaluation limitations that batch has
setlocal ENABLEDELAYEDEXPANSION
REM The name of your file
set fname=file.txt
REM If our file doesn't already exist, make a new one with 6 empty lines since that's all we want for now.
if EXIST "%fname%" goto alreadyExists
for /l %%b in (1,1,6) do echo.>>"%fname%"
:alreadyExists
REM The name of a temp file
set tfile=f2.txt
REM A counter to track the line number
set counter=0
REM Input to get the line number you wish to replace
set /p replacementLine=Type the line number that should be replaced:
REM The content that goes on the replaced line
set newContent=New entry
REM Read the file, iterate through all lines.
for /f "tokens=*" %%a in (file.txt) do (
REM Add one to the counter
set /a counter=!counter!+1
REM Use the redirect '>' operator for the first line
if "!counter!"=="1" (
if "!counter!"=="%replacementLine%" (
REM We're on the line we wish to replace, so use the replacement line content
echo.%newContent% >f2.txt
) else (
REM We're NOT on the line we wish to replace, so use the original line content
echo.%%a >f2.txt
)
) else (
REM else for lines other than the first, use the append redirect '>>'
if "!counter!"=="%replacementLine%" (
REM We're on the line we wish to replace, so use the replacement line content
echo.%newContent% >>f2.txt
) else (
REM We're NOT on the line we wish to replace, so use the original line content
echo.%%a >>f2.txt
)
)
)
REM Delete the original file
del "%fname%"
REM Replace it with the modified copy
ren "%tfile%" "%fname%"
You can replace a few lines at the top get the functionality you want.
you can't write to a specific line in a file with batch. Instead you have to rewrite the complete file.
Steps: a) read the file. b) change the desired line. c) (over)write the file with the new data.
#echo off
setlocal enabledelayedexpansion
if not exist reminder.txt call :InitFile :: create the file, if it doesn't exist
set /p "n=Enter slot # for reminder: "
set /p "a=type in the assignment name: "
set /p "c=type in the class: "
set /p "d=type in the date due: "
cls
call :ReadFile
set "_Line[%n%]=Reminder for %c% Homework: %a%,%d%"
call :WriteFile
type Reminder.txt
goto :eof
:ReadFile
set x=0
for /f "delims=" %%i in (reminder.txt) do (
set /a x+=1
set "_Line[!x!]=%%i"
)
goto :eof
:WriteFile
set x=0
(for /f "tokens=2 delims==" %%i in ('set _Line[') do echo %%i)>Reminder.txt
goto :eof
:InitFile
(for /l %%i in (1,1,6) do echo Reminder %%i [empty])>Reminder.txt
goto :eof
(Note: this would make trouble with more than 9 lines because of the alphabetical sorting with set _line[, but as you need only 6 lines, this should not be a problem for you)
Note: your input shouldn't contain !
So, I've been trying to create a simple spinning line thing that goes on for a set number of loops. I've encountered a problem: I can't find a way to add to a variable, or have a loop counter. This is my code so far (Other general criticisms are accepted too: I'm new to this and it all helps.)
#echo off
:1
echo
echo
echo
echo -
echo
cls
echo
echo
echo /
echo
cls
echo
echo
echo I
echo
cls
echo
echo
echo \
echo
cls
echo
echo
echo -
echo
IF %timer%
goto 1
pause
Really sorry if it's already been asked; I just can't seem to find what I'm looking for. Also, it's very possible this could just be a simple command, in which case i apologise again.
There's a couple of errors with your code as it stands.
The major one is
IF %timer%
goto 1
Batch is a ver old-fashioned language and is very particular about syntax. You can get a syntax description by typing
if /? |more
at the prompt. (replace if with the keyword you desire)
if requires
if string1==string2 thingtodoiftrue
Over the years, the syntax has been expanded, still maintaining the old version for compatibility so that the general form is now
if string1==string2 (thingtodoiftrue) else (thingtodoiffalse)
where == may now be a number of operators (equ, neq, ...); you can add a /i switch to make the strings case-insensitive, or a not keyword to reverse the sense. The parentheses are optional if the thingtodo is a single statement.
There are some quirky syntax requirements however. Either thingtodoiftrue or ( must be on the same physical line as the if keyword. The sequence ) else ( must all be on one physical line (if it's used)
As for performing some variety of count using your original structure, there are many ways. Here's one:
#echo off
set count=15
:1
....
set /a count=count-1
IF %count% neq 0 goto 1
pause
This may be what you are looking for. This runs the code 10000 times and it could be modified according to your need.
#echo off
for /l %%i in (1,1,10000) do (
echo -
cls
echo /
cls
echo I
cls
echo \
cls
)
Cheers, G
#echo off
setlocal enableextensions disabledelayedexpansion
rem Get a 0x13 character (carriage return) char inside a variable
for /f %%a in ('copy /Z "%~f0" nul') do set "CR=%%a"
rem Spin the line
setlocal enabledelayedexpansion
for /l %%a in (1 1 5000) do for %%b in (- \ ^| /) do (
set /a "pct=%%a / 50"
<nul set /p ".=%%b !pct!%% !cr!"
)
endlocal
The basic idea is to output the spinning element, followed by the percentage. To keep all the output in the same line
<nul set /p "var=outputtext"
is used. This echoes the indicated text to console, waits for input, that is readed from nul, ending the prompt wait and continues without moving the cursor to the next line. There is no line feed
Now, it is necessary overwrite this line with the new information each time. To do it, it is necessary to get a carriage return character into a variable. For it, the for /f is used, retrieving the needed carriage return character from the output of the copy command.
note: the disabledelayedexpansion is necessary in this step to avoid problems if the full path/filename of the batch file (%~f0) contains any exclamation character.
The remaining code just iterates painting the corresponding character in the list, calculating the percentage to output and printing all to the console, without the line feed (<nul set /p ...) but with an aditional carriage return that moves the cursor to the start of the line. So, the next output will overwrite the previous one
note: in this case, enabledelayedexpansion is needed to get access to the content of the changed percentage variable and to output the carriage return. Without delayed expansion active, the parser removes the carriage return from the output.
In a DOS Batch File subroutine, how can I turn off echo within the subroutine, but before returning, put it back to what it was before (either on or off)?
For example, if there was a command called echo restore, I would use it like this:
echo on
... do stuff with echoing ...
call :mySub
... continue to do stuff with echoing ...
exit /b
:mySub
#echo off
... do stuff with no echoing ...
echo restore
goto :EOF
My first attempt was an utter failure - thanks jeb for pointing out the errors. For those that are interested, the original answer is available in the edit history.
Aacini has a good solution if you don't mind putting your subroutine in a separate file.
Here is a solution that works without the need of a 2nd batch file. And it actually works this time! :)
(Edit 2 - optimized code as per jeb's suggestion in comment)
:mysub
::Silently get the echo state and turn echo off
#(
setlocal
call :getEchoState echoState
echo off
)
::Do whatever
set return=returnValue
::Restore the echo state, pass the return value across endlocal, and return
(
endlocal
echo %echoState%
set return=%return%
exit /b
)
:getEchoState echoStateVar
#setlocal
#set file=%time%
#set file="%temp%\getEchoState%file::=_%_%random%.tmp"
#(
for %%A in (dummy) do rem
) >%file%
#for %%A in (%file%) do #(
endlocal
if %%~zA equ 0 (set %~1=OFF) else set %~1=ON
del %file%
exit /b
)
If you are willing to put up with the slight risk of two processes simultaneously trying to access the same file, the :getEchoState routine can be simplified without the need of SETLOCAL or a temp variable.
:getEchoState echoStateVar
#(
for %%A in (dummy) do rem
) >"%temp%\getEchoState.tmp"
#for %%A in ("%temp%\getEchoState.tmp") do #(
if %%~zA equ 0 (set %~1=OFF) else set %~1=ON
del "%temp%\getEchoState.tmp"
exit /b
)
The simplest way is to not turn echo off in the first place.
Instead, do what you currently do with the echo off line to the rest of your subroutine - prefix all commands in the subroutine with an # sign. This has the effect of turning off echo for that command, but keeps the echo state for future commands.
If you use commands that execute other commands, like IF or DO, you will also need to prefix the "subcommand" with an # to keep them from being printed when echo is otherwise on.
The easiest way is to extract the subroutine to another .bat file and call it via CMD /C instead of CALL this way:
echo on
... do stuff with echoing ...
cmd /C mySub
... continue to do stuff with echoing ...
exit /b
mySub.bat:
#echo off
... do stuff with no echoing ...
exit /b
This way the echo status will be automatically restored to the value it had when the CMD /C was executed; the only drawback of this method is a slightly slower execution...
Here is a straight forward solution that relies on a single temporary file (using %random% to avoid race conditions). It works and is at least localization resistant, i.e., it works for the two known cases stated by #JoelFan and #jeb.
#set __ME_tempfile=%temp%\%~nx0.echo-state.%random%.%random%.txt
#set __ME_echo=OFF
#echo > "%__ME_tempfile%"
#type "%__ME_tempfile%" | #"%SystemRoot%\System32\findstr" /i /r " [(]*on[)]*\.$" > nul
#if "%ERRORLEVEL%"=="0" (set __ME_echo=ON)
#erase "%__ME_tempfile%" > nul
#::echo __ME_echo=%__ME_echo%
#echo off
...
endlocal & echo %__ME_echo%
#goto :EOF
Add this preliminary code to increase the solution's robustness (although the odd's are high that it's not necessary):
#:: define TEMP path
#if NOT DEFINED temp ( #set "temp=%tmp%" )
#if NOT EXIST "%temp%" ( #set "temp=%tmp%" )
#if NOT EXIST "%temp%" ( #set "temp=%LocalAppData%\Temp" )
#if NOT EXIST "%temp%" ( #exit /b -1 )
:__ME_find_tempfile
#set __ME_tempfile=%temp%\%~nx0.echo-state.%random%.%random%.txt
#if EXIST "%__ME_tempfile%" ( goto :__ME_find_tempfile )
I wasn't really happy with the solution above specially because of the language issue and I found a very simple one just by comparing the result from current echo setting with the result when explicitly set OFF. This is how it works:
:: SaveEchoSetting
:: :::::::::::::::::::::::::::
:: Store current result
#echo> %temp%\SEScur.tmp
:: Store result when explicitly set OFF
#echo off
#echo> %temp%\SESoff.tmp
:: If results do not match, it must have been ON ... else it was already OFF
#for /f "tokens=*" %%r in (%temp%\SEScur.tmp) do (
#find "%%r" %temp%\SESoff.tmp > nul
#if errorlevel 1 (
#echo #echo on > %temp%\SESfix.bat
) else (
#echo #echo off > %temp%\SESfix.bat
)
)
::
:: Other code comes here
:: Do whatever you want with echo setting ...
::
:: Restore echo setting
#call %temp%\SESfix.bat
I was looking for the same solution to the same problem, and after reading your comments I had an idea (which is not the answer to the question, but for my problem is even better).
I wasn't satisfied with the cmd.exe /c mysub.cmd because it makes hard or even impossible to return variables (I didn't check) - (couldn't comment because it's the first time I post here :)
Instead noticed that all we want -in the end- is to suppress stdout:
echo on
rem call "mysub.cmd" >nul
call :mysub >nul
echo %mysub_return_value%
GOTO :eof
:mysub
setlocal
set mysub_return_value="ApplePie"
endlocal & set mysub_return_value=%mysub_return_value%
GOTO :eof
It works fine with labelled subroutines, with subroutines contained in .cmd files, and I suppose it would work fine even with the cmd.exe /c variant (or start).
It also has the plus that we can keep or discard the stderr, replacing >nul with >nul 2>&1
I note that ss64.com scares kids like me stating that with call "Redirection with & | <> also does not work as expected".
This simple test works as expected. He must have been thinking of more complex situations.
I need to pass an ID and a password to a batch file at the time of running rather than hardcoding them into the file.
Here's what the command line looks like:
test.cmd admin P#55w0rd > test-log.txt
Another useful tip is to use %* to mean "all". For example:
echo off
set arg1=%1
set arg2=%2
shift
shift
fake-command /u %arg1% /p %arg2% %*
When you run:
test-command admin password foo bar
The above batch file will run:
fake-command /u admin /p password admin password foo bar
I may have the syntax slightly wrong, but this is the general idea.
Here's how I did it:
#fake-command /u %1 /p %2
Here's what the command looks like:
test.cmd admin P#55w0rd > test-log.txt
The %1 applies to the first parameter the %2 (and here's the tricky part) applies to the second. You can have up to 9 parameters passed in this way.
If you want to intelligently handle missing parameters you can do something like:
IF %1.==. GOTO No1
IF %2.==. GOTO No2
... do stuff...
GOTO End1
:No1
ECHO No param 1
GOTO End1
:No2
ECHO No param 2
GOTO End1
:End1
Accessing batch parameters can be simple with %1, %2, ... %9 or also %*,
but only if the content is simple.
There is no simple way for complex contents like "&"^&, as it's not possible to access %1 without producing an error.
set var=%1
set "var=%1"
set var=%~1
set "var=%~1"
The lines expand to
set var="&"&
set "var="&"&"
set var="&"&
set "var="&"&"
And each line fails, as one of the & is outside of the quotes.
It can be solved with reading from a temporary file a remarked version of the parameter.
#echo off
SETLOCAL DisableDelayedExpansion
SETLOCAL
for %%a in (1) do (
set "prompt="
echo on
for %%b in (1) do rem * #%1#
#echo off
) > param.txt
ENDLOCAL
for /F "delims=" %%L in (param.txt) do (
set "param1=%%L"
)
SETLOCAL EnableDelayedExpansion
set "param1=!param1:*#=!"
set "param1=!param1:~0,-2!"
echo %%1 is '!param1!'
The trick is to enable echo on and expand the %1 after a rem statement (works also with %2 .. %*).
So even "&"& could be echoed without producing an error, as it is remarked.
But to be able to redirect the output of the echo on, you need the two for-loops.
The extra characters * # are used to be safe against contents like /? (would show the help for REM).
Or a caret ^ at the line end could work as a multiline character, even in after a rem.
Then reading the rem parameter output from the file, but carefully.
The FOR /F should work with delayed expansion off, else contents with "!" would be destroyed.
After removing the extra characters in param1, you got it.
And to use param1 in a safe way, enable the delayed expansion.
Yep, and just don't forget to use variables like %%1 when using if and for and the gang.
If you forget the double %, then you will be substituting in (possibly null) command line arguments and you will receive some pretty confusing error messages.
A friend was asking me about this subject recently, so I thought I'd post how I handle command-line arguments in batch files.
This technique has a bit of overhead as you'll see, but it makes my batch files very easy to understand and quick to implement. As well as supporting the following structures:
>template.bat [-f] [--flag] [--namedvalue value] arg1 [arg2][arg3][...]
The jist of it is having the :init, :parse, and :main functions.
Example usage
>template.bat /?
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
USAGE:
test.bat [flags] "required argument" "optional argument"
/?, --help shows this help
/v, --version shows the version
/e, --verbose shows detailed output
-f, --flag value specifies a named parameter value
>template.bat <- throws missing argument error
(same as /?, plus..)
**** ****
**** MISSING "REQUIRED ARGUMENT" ****
**** ****
>template.bat -v
1.23
>template.bat --version
test v1.23
This is a sample batch file template,
providing command-line arguments and flags.
>template.bat -e arg1
**** DEBUG IS ON
UnNamedArgument: "arg1"
UnNamedOptionalArg: not provided
NamedFlag: not provided
>template.bat --flag "my flag" arg1 arg2
UnNamedArgument: "arg1"
UnNamedOptionalArg: "arg2"
NamedFlag: "my flag"
>template.bat --verbose "argument #1" --flag "my flag" second
**** DEBUG IS ON
UnNamedArgument: "argument #1"
UnNamedOptionalArg: "second"
NamedFlag: "my flag"
template.bat
#::!/dos/rocks
#echo off
goto :init
:header
echo %__NAME% v%__VERSION%
echo This is a sample batch file template,
echo providing command-line arguments and flags.
echo.
goto :eof
:usage
echo USAGE:
echo %__BAT_NAME% [flags] "required argument" "optional argument"
echo.
echo. /?, --help shows this help
echo. /v, --version shows the version
echo. /e, --verbose shows detailed output
echo. -f, --flag value specifies a named parameter value
goto :eof
:version
if "%~1"=="full" call :header & goto :eof
echo %__VERSION%
goto :eof
:missing_argument
call :header
call :usage
echo.
echo **** ****
echo **** MISSING "REQUIRED ARGUMENT" ****
echo **** ****
echo.
goto :eof
:init
set "__NAME=%~n0"
set "__VERSION=1.23"
set "__YEAR=2017"
set "__BAT_FILE=%~0"
set "__BAT_PATH=%~dp0"
set "__BAT_NAME=%~nx0"
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedOptionalArg="
set "NamedFlag="
:parse
if "%~1"=="" goto :validate
if /i "%~1"=="/?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="-?" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="--help" call :header & call :usage "%~2" & goto :end
if /i "%~1"=="/v" call :version & goto :end
if /i "%~1"=="-v" call :version & goto :end
if /i "%~1"=="--version" call :version full & goto :end
if /i "%~1"=="/e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="-e" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--verbose" set "OptVerbose=yes" & shift & goto :parse
if /i "%~1"=="--flag" set "NamedFlag=%~2" & shift & shift & goto :parse
if /i "%~1"=="-f" set "NamedFlag=%~2" & shift & shift & goto :parse
if not defined UnNamedArgument set "UnNamedArgument=%~1" & shift & goto :parse
if not defined UnNamedOptionalArg set "UnNamedOptionalArg=%~1" & shift & goto :parse
shift
goto :parse
:validate
if not defined UnNamedArgument call :missing_argument & goto :end
:main
if defined OptVerbose (
echo **** DEBUG IS ON
)
echo UnNamedArgument: "%UnNamedArgument%"
if defined UnNamedOptionalArg echo UnNamedOptionalArg: "%UnNamedOptionalArg%"
if not defined UnNamedOptionalArg echo UnNamedOptionalArg: not provided
if defined NamedFlag echo NamedFlag: "%NamedFlag%"
if not defined NamedFlag echo NamedFlag: not provided
:end
call :cleanup
exit /B
:cleanup
REM The cleanup function is only really necessary if you
REM are _not_ using SETLOCAL.
set "__NAME="
set "__VERSION="
set "__YEAR="
set "__BAT_FILE="
set "__BAT_PATH="
set "__BAT_NAME="
set "OptHelp="
set "OptVersion="
set "OptVerbose="
set "UnNamedArgument="
set "UnNamedArgument2="
set "NamedFlag="
goto :eof
There is no need to complicate it. It is simply command %1 %2 parameters, for example,
#echo off
xcopy %1 %2 /D /E /C /Q /H /R /K /Y /Z
echo copied %1 to %2
pause
The "pause" displays what the batch file has done and waits for you to hit the ANY key. Save that as xx.bat in the Windows folder.
To use it, type, for example:
xx c:\f\30\*.* f:\sites\30
This batch file takes care of all the necessary parameters, like copying only files, that are newer, etc. I have used it since before Windows. If you like seeing the names of the files, as they are being copied, leave out the Q parameter.
In batch file
set argument1=%1
set argument2=%2
echo %argument1%
echo %argument2%
%1 and %2 return the first and second argument values respectively.
And in command line, pass the argument
Directory> batchFileName admin P#55w0rd
Output will be
admin
P#55w0rd
#ECHO OFF
:Loop
IF "%1"=="" GOTO Continue
SHIFT
GOTO Loop
:Continue
Note: IF "%1"=="" will cause problems if %1 is enclosed in quotes itself.
In that case, use IF [%1]==[] or, in NT 4 (SP6) and later only, IF "%~1"=="" instead.
Everyone has answered with really complex responses, however it is actually really simple. %1 %2 %3 and so on are the arguements parsed to the file. %1 is arguement 1, %2 is arguement 2 and so on.
So, if I have a bat script containing this:
#echo off
echo %1
and when I run the batch script, I type in this:
C:> script.bat Hello
The script will simply output this:
Hello
This can be very useful for certain variables in a script, such as a name and age. So, if I have a script like this:
#echo off
echo Your name is: %1
echo Your age is: %2
When I type in this:
C:> script.bat Oliver 1000
I get the output of this:
Your name is: Oliver
Your age is: 1000
Let's keep this simple.
Here is the .cmd file.
#echo off
rem this file is named echo_3params.cmd
echo %1
echo %2
echo %3
set v1=%1
set v2=%2
set v3=%3
echo v1 equals %v1%
echo v2 equals %v2%
echo v3 equals %v3%
Here are 3 calls from the command line.
C:\Users\joeco>echo_3params 1abc 2 def 3 ghi
1abc
2
def
v1 equals 1abc
v2 equals 2
v3 equals def
C:\Users\joeco>echo_3params 1abc "2 def" "3 ghi"
1abc
"2 def"
"3 ghi"
v1 equals 1abc
v2 equals "2 def"
v3 equals "3 ghi"
C:\Users\joeco>echo_3params 1abc '2 def' "3 ghi"
1abc
'2
def'
v1 equals 1abc
v2 equals '2
v3 equals def'
C:\Users\joeco>
FOR %%A IN (%*) DO (
REM Now your batch file handles %%A instead of %1
REM No need to use SHIFT anymore.
ECHO %%A
)
This loops over the batch parameters (%*) either they are quoted or not, then echos each parameter.
I wrote a simple read_params script that can be called as a function (or external .bat) and will put all variables into the current environment. It won't modify the original parameters because the function is being called with a copy of the original parameters.
For example, given the following command:
myscript.bat some -random=43 extra -greeting="hello world" fluff
myscript.bat would be able to use the variables after calling the function:
call :read_params %*
echo %random%
echo %greeting%
Here's the function:
:read_params
if not %1/==/ (
if not "%__var%"=="" (
if not "%__var:~0,1%"=="-" (
endlocal
goto read_params
)
endlocal & set %__var:~1%=%~1
) else (
setlocal & set __var=%~1
)
shift
goto read_params
)
exit /B
Limitations
Cannot load arguments with no value such as -force. You could use -force=true but I can't think of a way to allow blank values without knowing a list of parameters ahead of time that won't have a value.
Changelog
2/18/2016
No longer requires delayed expansion
Now works with other command line arguments by looking for - before parameters.
Inspired by an answer elsewhere by #Jon, I have crafted a more general algorithm for extracting named parameters, optional values, and switches.
Let us say that we want to implement a utility foobar. It requires an initial command. It has an optional parameter --foo which takes an optional value (which cannot be another parameter, of course); if the value is missing it defaults to default. It also has an optional parameter --bar which takes a required value. Lastly it can take a flag --baz with no value allowed. Oh, and these parameters can come in any order.
In other words, it looks like this:
foobar <command> [--foo [<fooval>]] [--bar <barval>] [--baz]
Here is a solution:
#ECHO OFF
SETLOCAL
REM FooBar parameter demo
REM By Garret Wilson
SET CMD=%~1
IF "%CMD%" == "" (
GOTO usage
)
SET FOO=
SET DEFAULT_FOO=default
SET BAR=
SET BAZ=
SHIFT
:args
SET PARAM=%~1
SET ARG=%~2
IF "%PARAM%" == "--foo" (
SHIFT
IF NOT "%ARG%" == "" (
IF NOT "%ARG:~0,2%" == "--" (
SET FOO=%ARG%
SHIFT
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE (
SET FOO=%DEFAULT_FOO%
)
) ELSE IF "%PARAM%" == "--bar" (
SHIFT
IF NOT "%ARG%" == "" (
SET BAR=%ARG%
SHIFT
) ELSE (
ECHO Missing bar value. 1>&2
ECHO:
GOTO usage
)
) ELSE IF "%PARAM%" == "--baz" (
SHIFT
SET BAZ=true
) ELSE IF "%PARAM%" == "" (
GOTO endargs
) ELSE (
ECHO Unrecognized option %1. 1>&2
ECHO:
GOTO usage
)
GOTO args
:endargs
ECHO Command: %CMD%
IF NOT "%FOO%" == "" (
ECHO Foo: %FOO%
)
IF NOT "%BAR%" == "" (
ECHO Bar: %BAR%
)
IF "%BAZ%" == "true" (
ECHO Baz
)
REM TODO do something with FOO, BAR, and/or BAZ
GOTO :eof
:usage
ECHO FooBar
ECHO Usage: foobar ^<command^> [--foo [^<fooval^>]] [--bar ^<barval^>] [--baz]
EXIT /B 1
Use SETLOCAL so that the variables don't escape into the calling environment.
Don't forget to initialize the variables SET FOO=, etc. in case someone defined them in the calling environment.
Use %~1 to remove quotes.
Use IF "%ARG%" == "" and not IF [%ARG%] == [] because [ and ] don't play will at all with values ending in a space.
Even if you SHIFT inside an IF block, the current args such as %~1 don't get updated because they are determined when the IF is parsed. You could use %~1 and %~2 inside the IF block, but it would be confusing because you had a SHIFT. You could put the SHIFT at the end of the block for clarity, but that might get lost and/or confuse people as well. So "capturing" %~1 and %~1 outside the block seems best.
You don't want to use a parameter in place of another parameter's optional value, so you have to check IF NOT "%ARG:~0,2%" == "--".
Be careful only to SHIFT when you use one of the parameters.
The duplicate code SET FOO=%DEFAULT_FOO% is regrettable, but the alternative would be to add an IF "%FOO%" == "" SET FOO=%DEFAULT_FOO% outside the IF NOT "%ARG%" == "" block. However because this is still inside the IF "%PARAM%" == "--foo" block, the %FOO% value would have been evaluated and set before you ever entered the block, so you would never detect that both the --foo parameter was present and also that the %FOO% value was missing.
Note that ECHO Missing bar value. 1>&2 sends the error message to stderr.
Want a blank line in a Windows batch file? You gotta use ECHO: or one of the variations.
To refer to a set variable in command line you would need to use %a% so for example:
set a=100
echo %a%
rem output = 100
Note: This works for Windows 7 pro.
For to use looping get all arguments and in pure batch:
Obs: For using without: ?*&|<>
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && (
call set "_arg_[!_cnt!]=!_arg_!" && for /l %%l in (!_cnt! 1 !_cnt!
)do echo/ The argument n:%%l is: !_arg_[%%l]!
)
goto :eof
Your code is ready to do something with the argument number where it needs, like...
#echo off && setlocal EnableDelayedExpansion
for %%Z in (%*)do set "_arg_=%%Z" && set/a "_cnt+=1+0" && call set "_arg_[!_cnt!]=!_arg_!"
fake-command /u !_arg_[1]! /p !_arg_[2]! > test-log.txt
Simple solution(even though question is old)
Test1.bat
echo off
echo "Batch started"
set arg1=%1
echo "arg1 is %arg1%"
echo on
pause
CallTest1.bat
call "C:\Temp\Test1.bat" pass123
output
YourLocalPath>call "C:\Temp\test.bat" pass123
YourLocalPath>echo off
"Batch started"
"arg1 is pass123"
YourLocalPath>pause
Press any key to continue . . .
Where YourLocalPath is current directory path.
To keep things simple store the command param in variable and use variable for comparison.
Its not just simple to write but its simple to maintain as well so if later some other person or you read your script after long period of time, it will be easy to understand and maintain.
To write code inline : see other answers.
Make a new batch file (example: openclass.bat) and write this line in the file:
java %~n1
Then place the batch file in, let's say, the system32 folder, go to your Java class file, right click, Properties, Open with..., then find your batch file, select it and that's that...
It works for me.
PS: I can't find a way to close the cmd window when I close the Java class. For now...
Paired arguments
If you prefer passing the arguments in a key-value pair you can use something like this:
#echo off
setlocal enableDelayedExpansion
::::: asigning arguments as a key-value pairs:::::::::::::
set counter=0
for %%# in (%*) do (
set /a counter=counter+1
set /a even=counter%%2
if !even! == 0 (
echo setting !prev! to %%#
set "!prev!=%%~#"
)
set "prev=%%~#"
)
::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
:: showing the assignments
echo %one% %two% %three% %four% %five%
endlocal
And an example :
c:>argumentsDemo.bat one 1 "two" 2 three 3 four 4 "five" 5
1 2 3 4 5
Predefined variables
You can also set some environment variables in advance. It can be done by setting them in the console or setting them from my computer:
#echo off
if defined variable1 (
echo %variable1%
)
if defined variable2 (
echo %variable2%
)
and calling it like:
c:\>set variable1=1
c:\>set variable2=2
c:\>argumentsTest.bat
1
2
File with listed values
You can also point to a file where the needed values are preset.
If this is the script:
#echo off
setlocal
::::::::::
set "VALUES_FILE=E:\scripts\values.txt"
:::::::::::
for /f "usebackq eol=: tokens=* delims=" %%# in ("%VALUES_FILE%") do set "%%#"
echo %key1% %key2% %some_other_key%
endlocal
and values file is this:
:::: use EOL=: in the FOR loop to use it as a comment
key1=value1
key2=value2
:::: do not left spaces arround the =
:::: or at the begining of the line
some_other_key=something else
and_one_more=more
the output of calling it will be:
value1 value2 something else
Of course you can combine all approaches. Check also arguments syntax , shift
If you're worried about security/password theft (that led you to design this solution that takes login credentials at execution instead of static hard coding without the need for a database), then you could store the api or half the code of password decryption or decryption key in the program file, so at run time, user would type username/password in console to be hashed/decrypted before passed to program code for execution via set /p, if you're looking at user entering credentials at run time.
If you're running a script to run your program with various user/password, then command line args will suit you.
If you're making a test file to see the output/effects of different logins, then you could store all the logins in an encrypted file, to be passed as arg to test.cmd, unless you wanna sit at command line & type all the logins until finished.
The number of args that can be supplied is limited to total characters on command line. To overcome this limitation, the previous paragraph trick is a workaround without risking exposure of user passwords.