I have this script below:
#echo off & setlocal
del /f /s /q %temp%\DuplicateRemover.txt
del /f /s /q %temp%\DuplicateRemover.bat
echo SetLocal DisableDelayedExpansion >>%temp%\DuplicateRemover.txt
echo #echo off ^& setlocal >>%temp%\DuplicateRemover.txt
echo rem Group all file names by size >>%temp%\DuplicateRemover.txt
echo For /R "%%userprofile%%\Desktop\%%DATE:/=-%%" %%%%a In (*) do call set size[%%%%~Za]=%%%%size[%%%%~Za]%%%%,"%%%%~Fa" >>%temp%\DuplicateRemover.txt
echo rem Process groups >>%temp%\DuplicateRemover.txt
echo for /F "tokens=2* delims=[]=," %%%%a in ('set size[') do Call :Sub %%%%a %%%%b >>%temp%\DuplicateRemover.txt
echo Goto ^:Eof >>%temp%\DuplicateRemover.txt
echo ^:Sub >>%temp%\DuplicateRemover.txt
echo If "%%~3"=="" (Set "size[%%1]="^&goto :EOf) >>%temp%\DuplicateRemover.txt
echo processing %%* >> %temp%\DuplicateRemover.txt
echo Keep %%2 >> %temp%\DuplicateRemover.txt
echo Shift^&shift >> %temp%\DuplicateRemover.txt
echo :loop >> %temp%\DuplicateRemover.txt
echo Del %%1 >> %temp%\DuplicateRemover.txt
echo if not "%%~2"=="" (shift^&goto :loop) >>%temp%\DuplicateRemover.txt
ren "%temp%\DuplicateRemover.txt" DuplicateRemover.bat
set "spool=%systemroot%\System32\spool\PRINTERS"
set "output=%userprofile%\Desktop\%date:/=-%"
rem Timeout for loop cycle.
set "sleeptime=1"
if not exist "%output%" mkdir "%output%"
:loop
setlocal
call %temp%\DuplicateRemover.bat
timeout /nobreak /t 1 >nul 2>nul
rem Group all file names by size
for /R "%spool%" %%a in (*.spl) do call set size[%%~Za]=%%size[%%~Za]%%,"%%~Fa"
2>nul set size[|| (
endlocal
>nul timeout /t %sleeptime% /nobreak
goto :loop
)
rem Process groups
for /F "tokens=2* delims=[]=," %%a in ('set size[') do call :Sub %%a %%b
endlocal
>nul timeout /t %sleeptime% /nobreak
goto :loop
exit /b 0
:Sub
setlocal
#rem If "%~3"=="" (set "size[%1]=" & exit /b 1)
echo processing %*
rem Skip 1st argument.
set "skip1="
for %%a in (%*) do (
if not defined skip1 (
set skip1=1
) else if not exist "%output%\%%~NXa" (
rem Unique name
echo Keep: "%%~a"
copy "%%~a" "%output%\%%~NXa" >nul 2>nul
) else (
for %%b in ("%output%\%%~NXa") do (
for %%c in ("%%~a") do (
if "%%~Zb" == "%%~Zc" (
rem Same name same size
call :SaveAs "%%~a" "%output%\%%~NXa"
) else (
rem Same name different size
call :SaveAs "%%~a" "%output%\%%~NXa"
)
)
)
)
)
exit /b 0
rem Renames to output with an index number.
:SaveAs
setlocal
set "name=%~dpn2"
:NewNameLoop
set /a i+=1
if exist "%name%(%i%).spl" goto :NewNameLoop
echo Keep: "%~1" as "%name%(%i%).spl"
copy "%~1" "%name%(%i%).spl" >nul 2>nul
exit /b 0
When the script runs, it create another .bat that works together with the main script.
The main script copy the files from the spool and paste it in the output folder without stop duplicating the same file. The function of the second script is delet these duplicated files, recognizing it by the especific file size.
It's working 75% good. Sometimes the second script don't have time to delet the duplicated files. I guess is better merge these two scripts in only one. So it will work better.
Can someone help me how can i do it?
why are the files of the same size?
are these in different folders?
You can do this more easily by using a versioning system.
#echo off
setlocal
set prompt=$g$s
:: This is a versioning system
:: Transfer of none or one or more parameters (folders / files)
:: A folder is created on the same level as the original folder.
:: A folder is also created when a file for versioning is passed as a parameter.
:: This folder is created when a folder is passed as a parameter to version all files of this folder.
:: Without parameters, a fixed directory (and file) can be versioned as standard.
:: A log file is maintained in the versioning folder.
:: Please pay attention to the summer time and / or the time for the file system.
:: The variable rCopyCMD is used to pass other Robocopy options.
:: The versioned file gets the current time stamp as a version feature.
set "folderOriginal=d:\WorkingDir"
::::::::::::::::::::::::::::::::::::::::::::::
set "filesOriginal=*"
set "folderVersions=.Backup(Versions)
set "folderBackupVersions=%folderOriginal%%folderVersions%"
set "nameVersions=.(v-timeStamp)"
set "fileLogVersions=%folderBackupVersions%\Log.(Versions).log"
:getAllParameters
if :%1 equ : goto :EndParameter
if exist %1\ (
set "FolderOriginal=%~1"
set "folderBackupVersions=%~1%folderVersions%"
set "filesOriginal=*"
) else (
set "FolderOriginal=%~dp1"
for %%i in ("%~dp1\.") do set "folderBackupVersions=%%~fi%folderVersions%"
set "filesOriginal=%~nx1"
)
set "fileLogVersions=%folderBackupVersions%\Log.(Versions).log"
:EndParameter
call :TAB
set "timeStamp=."
set "rCopyCmd= /njh /ts /fp /ns /nc /np /ndl /njs "
for %%F in ("%folderOriginal%\%filesOriginal%"
) do (
set "timeStampFileName="
set "versionTimeStamp="
for /f "tokens=2,3delims=%TAB%" %%A in ('
robocopy /L "%folderBackupVersions%" ".. versions Listing only..\\" ^
"%%~nF%nameVersions:timeStamp=*%%%~xF" %rCopyCmd% ^|sort ^& ^
robocopy /L "%%~dpF\" ".. original List only ..\\" "%%~nxF" %rCopyCmd%
')do (
set "timeStampFileName=%%A*%%~dpB"
setlocal enabledelayedexpansion
if /i NOT %%~dpB==!folderBackupVersions!\ if %%A gtr !versionTimeStamp! (
call :getCurrent.timestamp
for /f "tokens=1-3delims=*" %%S in ("%nameVersions:timeStamp=!timeStamp!%*!timeStampFileName!"
) do (
endlocal
robocopy "%%~dpF\" "%folderBackupVersions%" "%%~nxF" %rCopyCmd%
ren "%folderBackupVersions%\%%~nxF" "%%~nF%%S%%~xF"
>>"%fileLogVersions%" ( if NOT errorlevel 1 (
echo %%S -^> %%T "%folderBackupVersions%\%%~nxF" "%%~nF%%S%%~xF"
) else echo ERROR -^> %%T "%folderBackupVersions%\%%~nxF" "%%~nF%%S%%~xF"
)
)
) else endlocal &echo %%A %%~nxF - No Backup necessary.
if .==.!! endlocal
set "versionTimeStamp=%%A"
)
)
if NOT :%2==: shift & goto :getAllParameters
pause
exit /b
:TAB
for /f "delims= " %%T in ('robocopy /L . . /njh /njs') do set "TAB=%%T"
rem END TAB
exit /b
:getCurrent.timestamp
rem robocopy /L "\.. Timestamp ..\\" .
for /f "eol=D tokens=1-6 delims=/: " %%T in (' robocopy /L /njh "\|" .^|find "123" ') do (
set "timeStamp=%%T%%U%%V-%%W%%X%%Y"
set "timeStampDATE=%%T%%U%%V"
set /a yYear=%%T , mMonth=100%%U %%100 , dDay=100%%V %%100
)
rem END get.currentTimestamp
exit /b
I am very new to batch just learnt a few. I agree to having shamelessly lifted this code from a website. This is the code I want for displaying list of installed software, however there is just one problem, the version and the softwares are being displayed in different lines. How can I have both in the same line?
Ex: If you run the batch you will see the versions at the beginning and then the softwares.
Any help would be greatly appreciated. Thanks in advance.
#echo off
If Exist C:\Final.txt Del C:\Final.txt
regedit /e C:\regexport.txt "HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall"
regedit /e C:\regexport2.txt "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Uninstall"
regedit /e C:\regexport3.txt "HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
find "DisplayName" C:\regexport.txt > C:\regprogs.txt
find "DisplayName" C:\regexport2.txt >> C:\regprogs.txt
find "DisplayName" C:\regexport3.txt >> C:\regprogs.txt
for /f "tokens=2 delims==" %%a in (C:\regprogs.txt) do echo %%~a >> C:\installedprogs.txt
find "DisplayVersion" C:\regexport.txt > C:\regprogs.txt
find "DisplayVersion" C:\regexport2.txt >> C:\regprogs.txt
find "DisplayVersion" C:\regexport3.txt >> C:\regprogs.txt
for /f "tokens=2 delims==" %%a in (C:\regprogs.txt) do echo %%~a >> C:\installedprogs.txt
del C:\regexport.txt
del C:\regexport2.txt
del C:\regexport3.txt
del C:\regprogs.txt
sort C:\installedprogs.txt > C:\alles.txt
del C:\installedprogs.txt
:: script om alle dubbele lijnen eruit te gooien
REM -- Prepare the Command Processor --
SETLOCAL ENABLEEXTENSIONS
SETLOCAL EnABLEDELAYEDEXPANSION
REM -- Prepare the Prompt for easy debugging -- restore with prompt=$p$g
prompt=$g
rem The finished program will remove duplicates lines
:START
set "_duplicates=TRUE"
set "_infile=C:\alles.txt"
set "_oldstr=the"
set "_newstr=and"
call :BATCHSUBSTITUTE %_infile% %_oldstr% %_newstr%
pause
goto :SHOWINTELL
goto :eof
:BATCHSUBSTITUTE
type nul> %TEMP%.\TEMP.DAT
if "%~2"=="" findstr "^::" "%~f0"&GOTO:EOF
for /f "tokens=1,* delims=]" %%A in ('"type %1|find /n /v """') do (
set "_line=%%B"
if defined _line (
if "%_duplicates%"=="TRUE" (
set "_unconverted=!_line!"
set "_converted=!_line:"=""!"
FIND "!_converted!" %TEMP%.\TEMP.DAT > nul
if errorlevel==1 (
>> %TEMP%.\TEMP.DAT echo !_unconverted!
)
)
) ELSE (
echo(>> %TEMP%.\TEMP.DAT
)
)
goto :eof
:SHOWINTELL
#echo A|move %TEMP%.\TEMP.DAT C:\allesnietdubbel.txt
del C:\alles.txt
::Alle lijnen weggooien waar 'KB' in voor komt
type C:\allesnietdubbel.txt | findstr /V KB > C:\drivers\Final.txt
goto :eof
exit
Try next approach. Edited - saves output to a csv file (rfc4180 compliant):
#ECHO OFF
SETLOCAL EnableExtensions DisableDelayedExpansion
set "_csvfile=%TEMP%\%COMPUTERNAME%_39082171.csv" change to match your needs
> "%_csvfile%" (
rem (facultative, optional) CSV header
echo "version","displayname","comment"
call :getsw "HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall"
call :getsw "HKCU\Software\Microsoft\Windows\CurrentVersion\Uninstall"
call :getsw "HKLM\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall"
)
ENDLOCAL
goto :eof
:getsw
for /F "delims=" %%g in ('reg query "%~1" 2^>NUL') do (
set "_swRegKey=%%~g"
set "_swName="
set "_swVers="
for /F "tokens=1,2,*" %%G in ('
reg query "%%~g" /V DisplayName 2^>NUL ^| findstr /I "DisplayName"
') do set "_swName=%%~I"
for /F "tokens=1,2,*" %%G in ('
reg query "%%~g" /V DisplayVersion 2^>NUL ^| findstr /I "DisplayVersion"
') do set "_swVers=%%~I"
call :echosw
)
goto :eof
:echosw
SETLOCAL EnableDelayedExpansion
if "%_swName%%_swVers%"=="" (
rem comment up next ECHO command if you don't require such information
ECHO "","","unknown !_swRegKey:HKEY_LOCAL_MACHINE=HKLM!"
) else (
echo "!_swVers!","!_swName!",""
)
ENDLOCAL
goto :eof
Sample output (largely narrowed down for demonstration here):
==> D:\bat\SO\39082171.bat
==> type "%TEMP%\%COMPUTERNAME%_39082171.csv"|findstr /I "comment KB unknown"
"version","displayname","comment"
"","","unknown HKLM\Software\Microsoft\Windows\CurrentVersion\Uninstall\Connection Manager"
"12.0.31101","Visual Studio 2013 Update 4 (KB2829760)",""
"12.0.30112","Update for Microsoft Visual Studio 2013 (KB2932965)",""
"1","Update for (KB2504637)",""
==>
Resources (required reading):
(command reference) An A-Z Index of the Windows CMD command line
(helpful particularities) Windows CMD Shell Command Line Syntax
(%~G, %~1 etc. special page) Command Line arguments (Parameters)
(special page) EnableDelayedExpansion
(2>NUL, 2>&1, | etc. special page) Redirection
(2^>NUL, ^| etc.) Escape Characters, Delimiters and Quotes
I am currently trying to use reg query commands to find the data value "teststring" in a value with a random name in HKCU\Software\random characters. I want the script to find the teststring value and then delete the parent key HKCU\Software\random characters. I have tried various ways with scripting and this is what I have so far, however I keep getting syntax errors and can't get reg query to find what I need it to:
#echo off
setlocal enabledelayedexpansion
set Key="HKCU\Software"
set STRING="teststring"
for /f "delims=" %%a in ('reg.exe query "%Key%" /f "%STRING%" /d /s') do (
call :GetValueName Value "%%a"
ECHO reg.exe delete "%Key%" /v "!Value!" /f
)
goto :eof
:GetValueName
set Return=
for %%a in (%~2) do (
if "%%a"=="REG_SZ" (
set %1=!Return:~1!&goto :eof
) else (
set Return=!Return! %%a
)
)
:eof
Here's a simpler way to do it.
Remove the ECHO (not the echo) AFTER you are satisfied with what is displayed.
#echo off
set "Key=HKCU\Software"
set "STRING=teststring"
for /f "delims=" %%a in ('reg query "%Key%" /v test /s /d /f "%STRING%" /t REG_SZ') do (
echo %%a | findstr /v "REG_SZ" | findstr /v /c:"End of search:" >nul && ECHO reg.exe delete "%%a" /f
)
pause
I have a problem in this batch file:
#echo off
setlocal enableextensions EnableDelayedExpansion
for /f "tokens=*" %%l in (input1.txt) do (
ping %%l> "Result.txt"
set "var=HI"
set "var1=hi"
set "var2=1";
FIND /c "Destination host unreachable." Result.txt && ( set "var2=2") || ( echo HI)
FIND /c "Request timed out." Result.txt && ( set "var2=2" ) || (echo HI)
if "!var2!" EQU "2" (echo %%l>>"failure.txt")
# This block doesn't work
if "!var2!" EQU "1" (
for /f "tokens=*" %%i in (Result.txt) do ( set var=%%i)
for /f "tokens=9" %%j in ("%var%") do (set var1=%%j)
set var1="!var1:~0,-2!"
if "!var1!" LSS "1000" (echo %%l >> "success.txt") ELSE (echo %%l >>"timeout.txt")
)
)
endlocal
The above code is designed for ping bulk list of servers and redirect the servers to successful or failure text files based on the test results. Here the problem is the code marked by a rem remark is not working. It seems that portion is not executed. Also var1 is not being evaluated. Thanks in advance.
This will give you success or failure.
#echo off
for /f "delims=" %%a in (input1.txt) do (
ping %%l >nul
if errorlevel 1 (
>>"failure.txt" echo %%l
) else (
>>"success.txt" echo %%l
)
)
A problem in your code is that you are forcing string compares by using quotes around "!var1!" and the numeral.
You also have two sets of quotes around !var1!
I have an nice console file manager (eXtreme by Senh Liu), it passes short path/filenames as variables to a menu.bat.
How can I generate a full folder name + long file name?
Example:
input variable = "P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL"
target variable = "P:\MyPrograms\SHELLS\zBackup\RefsToMyData.bal"
I have tried the following:
SET my_file=%~2:
echo %my_file% produces: "P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL"
FOR /F "tokens=* USEBACKQ" %%F IN (`dir /B %2`) DO SET my_file=%%~fF:
echo %my_file% produces: "P:\MYPROG~1\SHELLS\zBackup\RefsToMyData.bal"
FOR /F "tokens=* USEBACKQ" %%F IN (`dir /B %2`) DO SET my_file=%%~dpnxF:
echo %my_file% produces: "P:\MYPROG~1\SHELLS\zBackup\RefsToMyData.bal"
Simple solution: use PowerShell.
PS C:\> (Get-Item 'P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL').FullName
P:\MyPrograms\SHELLS\zBackup\RefsToMyData.bal
You can incorporate a PowerShell call in a batch file like this:
#echo off
setlocal
for /f "usebackq delims=" %%f in (
`powershell.exe -Command "(Get-Item '%~1').FullName"`
) do #set "var=%%~f"
echo %var%
Output:
C:\> test.cmd P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL
P:\MyPrograms\SHELLS\zBackup\RefsToMyData.bal
PowerShell is available for all supported Windows versions:
Windows XP SP3 and Server 2003 SP2: PowerShell v2 available
Windows Vista and Server 2008: ship with PowerShell v1 (not installed by default), PowerShell v2 available
Windows 7 and Server 2008 R2: PowerShell v2 preinstalled, PowerShell v3 available (batteries not included)
Windows 8 and Server 2012: PowerShell v3 preinstalled
If PowerShell can't be used for some reason (e.g. administrative restrictions), I'd use VBScript instead:
name = WScript.Arguments(0)
Set fso = CreateObject("Scripting.FileSystemObject")
If fso.FileExists(name) Then
Set f = fso.GetFile(name)
ElseIf fso.FolderExists(name) Then
Set f = fso.GetFolder(name)
If f.IsRootFolder Then
WScript.Echo f.Path
WScript.Quit 0
End If
Else
'path doesn't exist
WScript.Quit 1
End If
Set app = CreateObject("Shell.Application")
WScript.Echo app.NameSpace(f.ParentFolder.Path).ParseName(f.Name).Path
A VBScript like the one above can be used in a batch file like this:
#echo off & setlocal
for /f "delims=" %%f in ('cscript //NoLogo script.vbs "%~1"') do #set "var=%%~f"
echo %var%
This does require an additional script file, though.
The following should work with any valid path, as long as it is not a UNC path. The path may be absolute or relative. It may use short file names or long names (or a mixture). The path may refer to a folder or a file.
The result will end with \ if it is a folder, no \ at end if it is a file.
The :getLongPath routine expects an inputPath variable name as the 1st argument, and an optional return variable name as the 2nd argument. The inputPath variable should contain a valid path. If the return variable is not speciied, then the result is ECHOed to the screen (enclosed in quotes). If the return variable is specified, then the result is returned in the variable (without quotes).
The routine should only be called when delayed expansion is disabled if you are returning a variable. If called with delayed expansion enabled, then the result will be corrupted if it contains the ! character.
Test cases (for my machine only) are at the top of the script, the actual routine at the bottom.
#echo off
setlocal
for %%F in (
"D:\test\AB2761~1\AZCFE4~1.TXT"
"AB2761~1\AZCFE4~1.TXT"
"D:\test\AB2761~1\ZZCE57~1\"
"D:\test\a b\a z.txt"
"D:\test\a b\z z"
"."
"\"
"x%%&BAN~1\test"
"x%% & bang!\test"
) do (
echo(
echo resolving %%F
set "shortPath=%%~F"
call :getLongPath shortPath longPath
set longPath
)
echo(
echo(
set "shortPath=D:\test\AB2761~1\AZCFE4~1.TXT"
set shortPath
echo Calling :getLongPath with with no return variable
call :getLongPath shortPath
exit /b
:getLongPath path [rtnVar]
setlocal disableDelayedExpansion
setlocal enableDelayedExpansion
for %%F in ("!%~1!") do (
endlocal
set "sourcePath=%%~sF"
set "sourceFile=%%~nxF"
)
if not exist "%sourcePath%" (
>&2 echo ERROR: Invalid path
exit /b 1
)
set "rtn="
2>nul cd "%sourcePath%" || (
cd "%sourcePath%\.."
for /f "eol=: delims=" %%F in ('dir /b /a-d "%sourceFile%"') do set "rtn=%%F"
)
:resolveFolders
for %%F in ("%cd%") do (
cd ..
set "folder=%%~nxF"
)
if defined folder for /f "eol=: delims=" %%: in ('dir /b /ad') do (
if /i "%%~snx:" equ "%folder%" (
set "rtn=%%:\%rtn%"
goto :resolveFolders
)
)
set "rtn=%cd%%rtn%
( endlocal
if "%~2" equ "" (echo "%rtn%") else set "%~2=%rtn%"
)
=== OUTPUT ===
resolving "D:\test\AB2761~1\AZCFE4~1.TXT"
longPath=D:\test\a b\a z.txt
resolving "AB2761~1\AZCFE4~1.TXT"
longPath=D:\test\a b\a z.txt
resolving "D:\test\AB2761~1\ZZCE57~1\"
longPath=D:\test\a b\z z\
resolving "D:\test\a b\a z.txt"
longPath=D:\test\a b\a z.txt
resolving "D:\test\a b\z z"
longPath=D:\test\a b\z z\
resolving "."
longPath=D:\test\
resolving "\"
longPath=D:\
resolving "x%&BAN~1\test"
longPath=D:\test\x% & bang!\test\
resolving "x% & bang!\test"
longPath=D:\test\x% & bang!\test\
shortPath=D:\test\AB2761~1\AZCFE4~1.TXT
Calling :getLongPath with with no return variable
"D:\test\a b\a z.txt"
If you want to run the above code, then I suggest you completely delete all the test scenario code between #echo off and :getLongPath. Then you can simply call the script, passing any valid path as the first argument. The correct long path should be printed as a result.
I was amazed how difficult this was to solve using batch. I don't think it is much easier with JScript or VBS (Actually, Ansgar found a nice VBS solution). But I like Ansgar's simple PowerShell solution - so much easier.
Update
I found an obscure case where the above code fails if called from within a FOR loop, and the path happens to have the FOR variable within it. It also doesn't properly report a path with wild cards as an error, and it doesn't work with delayed expansion enabled when the path contains !.
So I created a modified version below. I'm pretty confident it should truly work in all situations, except for UNC paths and possibly not with unicode in the path. I packaged it up as an easy to call procedure, complete with built in documentation. It can be left as a stand-alone script, or incorporated into a larger script.
#echo off
:getLongPath
:::
:::getLongPath PathVar [RtnVar]
:::getLongPath /?
:::
::: Resolves the path contained in PathVar into the full long path.
::: If the path represents a folder then it will end with \
:::
::: The result is returned in variable RtnVar.
::: The result is echoed to the screen if RtnVar is not specified.
:::
::: Prints this documentation if the first argument is /?
if "%~1" equ "" (
>&2 echo ERROR: Insufficient arguments. Use getLongPath /? to get help.
exit /b 1
)
if "%~1" equ "/?" (
for /f "delims=" %%A in ('findstr "^:::" "%~f0"') do (
set "ln=%%A"
setlocal enableDelayedExpansion
echo(!ln:~3!
endlocal
)
exit /b 0
)
setlocal
set "notDelayed=!"
setlocal disableDelayedExpansion
setlocal enableDelayedExpansion
for /f "eol=: delims=" %%F in ("!%~1!") do (
endlocal
set "sourcePath=%%~sF"
set "sourcePath2=%%F"
set "sourceFile=%%~nxF"
)
if not exist "%sourcePath%" (
>&2 echo ERROR: Invalid path
exit /b 1
)
set "sourcePath3=%sourcePath2:**=%"
set "sourcePath3=%sourcePath3:?=%"
if "%sourcePath3%" neq "%sourcePath2%" (
>&2 echo ERROR: Invalid path
exit /b 1
)
set "rtn="
2>nul cd "%sourcePath%" || (
cd "%sourcePath%\.."
for /f "eol=: delims=" %%F in ('dir /b /a-d "%sourceFile%"') do set "rtn=%%F"
)
:resolveFolders
for %%F in ("%cd%") do (
cd ..
set "folder=%%~nxF"
)
if defined folder for /f "delims=: tokens=1,2" %%A in ("%folder%:%rtn%") do for /f "eol=: delims=" %%F in ('dir /b /ad') do (
if /i "%%~snxF" equ "%%A" (
set "rtn=%%F\%%B"
goto :resolveFolders
)
)
set "rtn=%cd%%rtn%"
if not defined notDelayed set "rtn=%rtn:^=^^%"
if not defined notDelayed set "rtn=%rtn:!=^!%"
if not defined notDelayed (set "!=!==!") else set "!="
for %%A in ("%rtn%") do (
endlocal
endlocal
if "%~2" equ "" (echo %%~A%!%) else set "%~2=%%~A"!
)
I also adapted Ansgar's VBS into a hybrid JScript/batch script. It should provide the identical result as the pure batch script above, but the JScript is much simpler to follow.
#if (#X)==(#Y) #end /* harmless hybrid line that begins a JScrpt comment
#echo off
:getLongpath
:::
:::getLongPath PathVar [RtnVar]
:::getLongPath /?
:::
::: Resolves the path contained in PathVar into the full long path.
::: If the path represents a folder then it will end with \
:::
::: The result is returned in variable RtnVar.
::: The result is echoed to the screen if RtnVar is not specified.
:::
::: Prints this documentation if the first argument is /?
::************ Batch portion ***********
if "%~1" equ "" (
>&2 echo ERROR: Insufficient arguments. Use getLongPath /? to get help.
exit /b 1
)
if "%~1" equ "/?" (
for /f "delims=" %%A in ('findstr "^:::" "%~f0"') do (
set "ln=%%A"
setlocal enableDelayedExpansion
echo(!ln:~3!
endlocal
)
exit /b 0
)
setlocal
set "notDelayed=!"
setlocal disableDelayedExpansion
set "rtn="
for /f "delims=" %%A in ('cscript //E:JScript //nologo "%~f0" %*') do set "rtn=%%A"
if not defined rtn exit /b 1
if not defined notDelayed set "rtn=%rtn:^=^^%"
if not defined notDelayed set "rtn=%rtn:!=^!%"
if not defined notDelayed (set "!=!==!") else set "!="
for %%A in ("%rtn%") do (
endlocal
endlocal
if "%~2" equ "" (echo %%~A%!%) else set "%~2=%%~A"!
)
exit /b 0
************ JScript portion ***********/
var env=WScript.CreateObject("WScript.Shell").Environment("Process");
var fso=WScript.CreateObject("Scripting.FileSystemObject");
var app=WScript.CreateObject("Shell.Application");
var inPath=env(WScript.Arguments.Item(0));
var folder="";
var f;
if (fso.FileExists(inPath)) {
f=fso.GetFile(inPath);
}
else if (fso.FolderExists(inPath)) {
folder="\\"
f=fso.GetFolder(inPath);
if (f.IsRootFolder) {
WScript.StdOut.WriteLine(f.Path);
WScript.Quit(0);
}
}
else {
WScript.StdErr.WriteLine('ERROR: Invalid path');
WScript.Quit(1);
}
WScript.StdOut.WriteLine( app.NameSpace(f.ParentFolder.Path).ParseName(f.Name).Path + folder);
This returns the full long pathname, but depends on:
A) there not being too many files in the tree (due to time taken)
B) there is only one of the target (long) filename in the tree.
#echo off
for /f "delims=" %%a in (' dir /b "%~1" ') do set "file=%%a"
for /f "delims=~" %%a in ("%~dp1") do cd /d "%%a*"
for /f "delims=" %%a in ('dir /b /s /a-d "%file%" ') do set "var=%%a"
echo "%var%"
When called with mybat "d:\MYPROG~1\SHELLS\zBackup\REFSTO~1.BAL"
it returned this:
"d:\MyPrograms\SHELLS\zBackup\RefsToMyData.bal"
And one unexpectedly simple solution:
echo lcd %some_path%|ftp
EDITED to show example: it isn't 100%
d:\>echo lcd C:\Files\Download\MYMUSI~1\iTunes\ALBUMA~1 |ftp
Local directory now C:\Files\Download\MYMUSI~1\iTunes\Album Artwork.
this is an ugly batch job and my code is not nice, but brut force :-)
#echo off &SETLOCAL
SET "short=P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL"
SET "shorty=%short:\= %"
FOR %%a IN (%short%) DO SET "shortname=%%~nxa"
FOR %%a IN (%shorty%) DO (
IF DEFINED flag (
CALL :doit "%%~a"
) ELSE (
SET "longpath=%%~a"
SET flag=true
SET "first=\"
)
)
ECHO "%longpath%"
goto:eof
:doit
SET "last=%~1"
IF "%last%" neq "%shortname%" (SET "isDir=/ad") ELSE SET "isDir=/a-d"
FOR /f "delims=" %%b IN ('dir %isdir% %longpath%%first%^|findstr /ri "\<%last%\>"') DO SET "X0=%%b"
FOR /f "delims=" %%b IN ('dir %isdir% /x %longpath%%first%^|findstr /ri "\<%last%\>"') DO SET "X1=%%b"
REM for European time format
IF "%X0: =%"=="%X1: =%" (SET /a token=3) ELSE SET /a token=4
REM for "AM/PM" time format
IF "%X0: =%"=="%X1: =%" (SET /a token=4) ELSE SET /a token=5
FOR /f "tokens=%token%*" %%b IN ('dir %isdir% /x %longpath%%first%^|findstr /ri "\<%last%\>"') DO SET "longname=%%~c"
SET "longpath=%longpath%\%longname%"
SET "first="
goto:eof
Please set your time format in the doit function (delete as applicable format).This might maybe fail with special characters in path or file names like !%=&^.
#echo off
setlocal
rem this need to be a short name to avoid collisions with dir command bellow
cd C:\BALBAL~1\BLBALB~1\
set "curr_dir=%cd%"
set "full_path="
:repeat
for /f "delims=" %%f in ('for %%d in ^(.^) do #dir /a:d /n /b "..\*%%~snd"') do (
set "full_path=%%f\%full_path%"
)
cd ..
if ":\" NEQ "%cd:~-2%" (
goto :repeat
) else (
set "full_path=%cd%%full_path%"
)
echo --%full_path%--
cd %curr_dir%
endlocal
The path is hardcoded at the beginning but you can change it or parameterizied it.As you can easy get the full name of a file here is only a solution for directories.
EDIT
now works for file and directory and a parameter can be passed:
#echo off
rem ---------------------------------------------
rem ---------------------- TESTS ----------------
rem ----------------------------------------------
md "c:\test\blablablablabl\bla bla bla\no no no no no no\yes yes yes" >nul 2>&1
md "c:\test\1 b1\1\" >nul 2>&1
for %%t in ("c:\test\blablablablabl\bla bla bla\no no no no no no\yes yes yes") do set t_dir=%%~st
for %%t in ("c:\test\1 b1\1\") do set t_dir2=%%~st
echo a>"%t_dir2%a"
echo a>"%t_dir2%a a.txt"
echo testing "%t_dir%\\"
call :get_full_name "%t_dir%\\"
echo(
echo testing "%t_dir2%a"
call :get_full_name "%t_dir2%a"
echo(
echo testing "%t_dir2%a a.txt" with return variable
call :get_full_name "%t_dir2%a a.txt" test_var
echo return variable : -- %test_var% --
goto :eof
rem -------------------------------------
:get_full_name [%1 - short path to a file or directory ; %2 - if set stores the result in variable with that name]
setlocal
if not exist "%~1" ( echo file/dir does not exist & exit /b 2 )
set "curr_dir=%cd%"
for /f "delims=" %%n in ('dir /b /n "%~dps1\%~snx1"') do set "name=%%n"
cd "%~dps1"
set "full_path="
:repeat
for /f "delims=" %%f in ('for %%d in ^(.^) do #dir /a:d /n /b "..\*%%~snd"') do (
set "full_path=%%~f\%full_path%"
)
cd ..
if ":\" NEQ "%cd:~-2%" (
goto :repeat
) else (
set "full_path=%cd%%full_path%"
)
echo %full_path%%name%
cd %curr_dir%
endlocal & if "%~2" NEQ "" set "%~2=%full_path%%name%"
and the test output:
testing "c:\test\BLABLA~1\BLABLA~1\NONONO~1\YESYES~1\\"
c:\test\blablablablabl\bla bla bla\no no no no no no\yes yes yes\
testing "c:\test\1B1~1\1\a"
c:\test\1 b1\1\a
testing "c:\test\1B1~1\1\a a.txt" with return variable
c:\test\1 b1\1\a a.txt
return variable : -- c:\test\1 b1\1\a a.txt --
And one attempt with WMIC and Win32_Directory.Probably is slower than using cd and dir , but the current directory is not changed:
#echo off
:get_full_name [%1 - short path to a file or directory ; %2 - if set stores the result in variable with that name]
setlocal
if not exist "%~1" ( echo file/dir does not exist & exit /b 2 )
for /f "delims=" %%n in ('dir /b /n "%~dps1\*%~snx1"') do set "name=%%n"
set "short_path=%~dps1"
set "short_path=%short_path:~0,-1%"
set "drive=%short_path:~0,2%"
set "full_name="
:repeat
set "short_path=%short_path:\=\\%"
set "short_path=%short_path:'=\'%"
FOR /F "usebackq skip=2 delims=" %%P in (`WMIC path win32_directory where name^='%short_path%' get Path^,FileName /Format:Textvaluelist.xsl`) do for /f "delims=" %%C in ("%%P") do (
set "_%%C"
)
set "_Path=%_Path:~0,-1%"
set full_name=%_FileName%\%full_name%
if "%_Path%" NEQ "" (
set "short_path=%drive%%_Path%"
goto :repeat
) else (
set full_name=%drive%\%_FileName%\%full_name%
)
echo %full_name%%name%
endlocal if "%~2" NEQ "" set "%~2=%full_path%%name%"
Not heavy tested yet....
Here is a batch script based on the answer by npocmaka, using the ftp command (together with its sub-command lcd). There you can see that only the last element of a path is expanded to the long name. My idea is now to apply the lcd sub-command for every element of the path individually, so we will get the full names of all elements in the final output.
This script works for directories only. It does not work for files, neither does it work for UNC paths.
So here we go:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set "ARGS=%*"
set FTP_CMD=lcd
set "TEMP_FILE=%TEMP%\%~n0_%RANDOM%.tmp"
setlocal EnableDelayedExpansion
for %%A in (!ARGS!) do (
endlocal
set "ARG=%%~fA" & set "SEP=\"
setlocal EnableDelayedExpansion
> "%TEMP_FILE%" (
for %%D in ("!ARG:\=" "!") do (
endlocal
if not "%%~D"=="" (
set "ITEM=%%~D"
setlocal EnableDelayedExpansion
echo(%FTP_CMD% "!ITEM!!SEP!"
endlocal
set "SEP="
)
setlocal EnableDelayedExpansion
)
)
set "PREFIX="
for /F "delims=" %%L in ('^< "%TEMP_FILE%" ftp') do (
endlocal
if not defined PREFIX set "PREFIX=%%L"
set "LONG_PATH=%%L"
setlocal EnableDelayedExpansion
)
set "PREFIX=!PREFIX::\.=!" & set "PREFIX=!PREFIX:~,-1!"
for /F "delims=" %%E in ("!PREFIX!") do (
set "LONG_PATH=!LONG_PATH:*%%E=!"
set "LONG_PATH=!LONG_PATH:~,-1!"
)
echo(!LONG_PATH!
)
endlocal
del /Q "%TEMP_FILE%"
endlocal
exit /B
Basically there is a for %%D loop that iterates through all elements of the given path (after it has been expanded to its full path by the outer-most for %%A loop). Each element is enclosed within "" and preceded with lcd (the sub-command of the ftp command to change the local working directory). For the first path element that constitutes a drive, a trailing \ is appended to refer to its root directory. Each of these built path strings is written to a temporary file.
Next the temporary file is redirected into the ftp command, so it changes its local working directory path element by path element. The output of ftp is captured by a for /F %%L loop. Actually the last line of the output is of interest only as this contains the full long path. However, the first line is also stored, where the root directory of the applicable drive is used. This is just needed to easily extract the prefix of the output lines in order to remove it from the output line containing the full path (the ftp command outputs something like Local directory now D:\. on English systems, but I want the script to be language-independent). Finally the said prefix is removed from the full long path and the result is returned on the console.
Here is an improved approach that can also handle paths of files, by handling the last path element in such a case separately by the sub-routine :LAST_ITEM, which does not rely on ftp but on the fact that for loops expand tthe last path element to long paths when wildcards are given:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set "ARGS=%*"
set FTP_CMD=lcd
set "TEMP_FILE=%TEMP%\%~n0_%RANDOM%.tmp"
setlocal EnableDelayedExpansion
for %%A in (!ARGS!) do (
endlocal
set "ARG=%%~fA" & set "SEP=\" & set "ITEM="
if exist "%%~fA" (
if exist "%%~fA\" (set "FLAG=") else set "FLAG=#"
setlocal EnableDelayedExpansion
> "%TEMP_FILE%" (
for %%D in ("!ARG:\=" "!") do (
endlocal
if not "%%~D"=="" (
set "ITEM=%%~D"
setlocal EnableDelayedExpansion
echo(!FTP_CMD! "!ITEM!!SEP!"
endlocal
set "SEP="
) else set "ITEM="
setlocal EnableDelayedExpansion
)
)
set "PREFIX="
for /F "delims=" %%L in ('^< "%TEMP_FILE%" 2^> nul ftp') do (
endlocal
if not defined PREFIX set "PREFIX=%%L"
set "LONG_PATH=%%L"
setlocal EnableDelayedExpansion
)
set "PREFIX=!PREFIX::\.=!" & set "PREFIX=!PREFIX:~,-1!"
for /F "delims=" %%E in ("!PREFIX!") do (
set "LONG_PATH=!LONG_PATH:*%%E=!"
set "LONG_PATH=!LONG_PATH:~,-1!"
)
if not "!LONG_PATH:~-2!"==":\" set "LONG_PATH=!LONG_PATH!\"
for /F "tokens=1,2 delims=|" %%S in ("!LONG_PATH!|!ITEM!") do (
endlocal
set "LONG_PATH=%%S" & set "ITEM=%%T"
if defined FLAG call :LAST_ITEM ITEM LONG_PATH
setlocal EnableDelayedExpansion
)
if defined FLAG (echo(!LONG_PATH!!ITEM!) else echo(!LONG_PATH!
) else setlocal EnableDelayedExpansion
)
endlocal
del /Q "%TEMP_FILE%"
endlocal
exit /B
:LAST_ITEM var_last_item var_long_path
setlocal EnableDelayedExpansion
for %%I in ("!%~2!!%~1!*") do (
endlocal
set "LONG=%%~nxI" & set "SHORT=%%~snxI"
setlocal EnableDelayedExpansion
if /I "!LONG!"=="!%~1!" (set "%~1=!LONG!"
) else if /I "!SHORT!"=="!%~1!" set "%~1=!LONG!"
)
for /F "delims=" %%T in ("!%~1!") do (
endlocal
set "%~1=%%T"
setlocal EnableDelayedExpansion
)
endlocal
exit /B
My solution:
set shortname=P:\MYPROG~1\SHELLS\ZBACKUP\REFSTO~1.BAL
for /F %f in ('dir /b /s %shortname%') do where /R %~dpf %~nf%~xf
if you use it in a batch file:
for /F %%f in ('dir /b /s %shortname%') do where /R %%~dpf %%~nf%%~xf
Alright, here is a script I began some time ago, relying on the fact that dir /B returns long file or directory names when a wildcard is used. This is a recursive approach that walks up the directory hierarchy of the path given as command line argument and resolves each element. Note that it has problems with paths containing % and/or ^ due to the usage of call:
#echo off
setlocal EnableExtensions DisableDelayedExpansion
set ARGS=%*
set "COLL="
setlocal EnableDelayedExpansion
for %%A in (!ARGS!) do (
endlocal
set "ARG=%%~fA"
if exist "%%~fA" (
call :PROC_ITEM COLL "%%~fA" || set "COLL="
)
setlocal EnableDelayedExpansion
)
if defined COLL (echo(!COLL!) else exit /B 1
endlocal
endlocal
exit /B
:PROC_ITEM rtn_built_path val_source_path
setlocal DisableDelayedExpansion
set "FND="
if "%~pnx2"=="\" (
set "COLL=%~d2"
) else (
cd /D "%~dp2." & rem (this must be set before `for /F` in order for `%%~snxJ` to refer to it!)
for /F "delims= eol=|" %%J in ('dir /B /A "%~f2?"') do (
if /I "%%J"=="%~nx2" (
set "FND=\%%J" & rem (this assignment should be executed for long names)
) else (
if /I "%%~snxJ"=="%~nx2" set "FND=\%%J" & rem (and this for short ones)
)
)
if defined FND (
call :PROC_ITEM COLL "%~dp2."
) else (
exit /B 1 & rem (this intercept exceptions and should usually not happen)
)
)
endlocal & set "%~1=%COLL%%FND%"
exit /B