My question is going to be rather vague but I will try to explain as detailed as I can what I am trying to resolve.
Trying to learn Linux kernel USB stack I have started to think of making a simple USB driver for my Atmel evaluation board based on ARM M0+ MCU to run away from Windows tools (Visual Studio plugin).
I have spent few days learning kernel's USB API and come to conclusion of how to make this. My driver aims to make my board connected to PC through USB cable act like a simple USB flash drive. Making that I then can easily program it with a new version of firmware written by me.
I have found that I need to find out specific interface (I am talking about interface in terms of USB specification, not interface we used to use as a code abstraction) that holds an endpoint (pipe) responsible for interaction with flash memory. And then I can map it to character device and interact with it using standard I/O operations that are described in struct file_operations structure.
Simply using cat on /proc/* file descriptor that was created by USB Core subsystem I have investigated that interface responsible for interaction with flash memory holds bulk endpoint (likewise, this terms come from USB specification, CMIIAW) that act as a "descriptor". Linux kernel USB Core subsystem gives neat interfaces to talk to different kind of endpoints whether it control, interrupt, bulk or asynchronous endpoint.
Now I have come closer to my very question.
Also the main transfer unit in communication between two USB devices is abstraction called urb - you allocate it, you fill it, you send it to USB Core subsystem, you read it if it was IN type of urb and, finally, you free it. What is confusing for me and tightly related to my question is the next API include/linux/usb.h:
static inline void usb_fill_bulk_urb(struct urb *urb,
struct usb_device *dev,
unsigned int pipe,
void *transfer_buffer,
int buffer_length,
usb_complete_t complete_fn,
void *context)
Assume I have obtained an information from board's datasheet about where to write a program code. Let's say, we have 0x00100 - 0x10000 memory region. I will compile my code, obtain a binary and then using standard Linux tools or writing a simple user-space wrapper application I will use lseek to set file's offset to 0x00100 and write system call provided with a buffer (binary compiled previously) and it's length.
In kernel space, I will have to allocate urb in write system call handler, fill it with a buffer sent from user space and submit this urb to USB Core.
BUT I can not find a way how to specify an OFFSET set earlier by lseek. Do I miss something? Maybe I missed some concepts or, perhaps, I am watching in a wrong way?
When your embedded Linux device acts as a USB mass storage device, the flash as a peripheral on Linux device is unmounted, and the gadget driver is loaded. Linux then loses control to the flash, and now the PC connected to your Linux device fully controls the flash. This is because a flash as a USB device can only has one USb host.
The gadget driver works purely in kernel space. It does not receive or transmit data from/to user space. It calls vfs_read() and vfs_write() to access the files on the flash, with an field offset. The offset is got from the USB commands sent from your host - Windows PC.
There is no way to specify offset using USB subsystem's API. I misunderstood whole conception of USB as communication protocol, unwise me. You must first learn underlying protocol your device uses to communicate with others.
If your device acts as a USB HID device then learning specification of how to exchange data with USB HID device is the way to go. If there is something proprietary then you can do nothing but reverse engineer it (listening USB packets with a sniffer on system where a driver for your device exists).
As for my board it has embedded debugger that serves as a communication module besides being debugger itself. Specifically, my device is equipped with EDBG and here is a link on description of protocol it uses for communication.
Related
I am so confused to understand hyperbus to communicate between Traveo II Body Evaluation Board to one hyperram, I read the datasheet (https://www.cypress.com/part/s27kl0641dabhi020) but still not understand how to implement example code. so for that, I search on google and I found this link (https://github.com/torvalds/linux/blob/master/drivers/mtd/hyperbus/hyperbus-core.c) but not found any example code yet so anyone helps me or anyone provides the useful link or one example code?
In Linux, drivers/mtd/hyperbus/ implements hyperbus as a Memory Technology Device, also known as an MTD device; so, the hyperbus is accessed via the Linux MTD subsystem. mtd-utils contains example code for accessing the MTD subsystem; see http://linux-mtd.infradead.org/ for further links.
The Linux MTD hyperbus subsystem exports a character device (/dev/mtdN). An userspace application opens this device (read-write), then does an MEMGETINFO ioctl() to obtain the MTD device information into a struct mtd_info_user structure (defined in <mtd/mtd-user.h>). Operations to read, write, and erase blocks are done via ioctl()s (defined in <mtd/mtd-abi.h>). (On a Linux workstation, you'll find these in /usr/include/mtd/ if standard C development packages have been installed; on Debian derivatives, they're provided by the linux-libc-dev package.)
On these machines, Device Tree is used to describe the actual hardware, including hyperbus. You do not "configure" the hyperbus from the userspace when you open the character device; each hyperbus is described by a device tree blob (.dtb) or an overlay the kernel loads (or receives from the bootloader like uboot) at bootup. I assume you already have the Device Tree etc. configured, since you are asking about how to use the character device; the character device(s) are created by the kernel from the Device Tree descriptions, and only show up if the hyperbus(es) have been configured.
I've been tasked to import the spi driver into an existing platform running Openwrt.
After "successfully" build the full Openwrt: packages and the kernel matching the one running into the platform, including the spidev kernel module I run into some trouble in make this module work.
**insmod** of the driver terminates without error, and I see that in the **/sys/class** the creation of the directory **spidev**, but it is empty.
Looking at the code of the spidev kernel module, the function **probe** has caught my eye. My feel is that this function is what actually allocates the minor device number an make the device available to be used. But it's not clear to me who, or what should call it.
Another doubt I have is about the architecture. The spi depends on the underlaying architecture, which in my case is the MT7620 soc which is a mipsel architecture have a specific spi code. In my understanding this SOC specific code is wrapped by the spidev kernel module and the link between these two entities should be
status = spi_register_driver(&spidev_spi_driver);
in the
static int __init spidev_init(void)
function.
Again, I'm far to be sure of what I'm writing and I'm here asking for directions.
First, you may want to read the Linux Device Driver - Chapter 14.
Generally speaking, in the Linux kernel you have devices and drivers on a bus (subsystem). You have to register them using the functions register_device() and register_driver() (the exact name depends on the subsystem). When a device or a driver get registered the subsystem will try to match devices with drivers. If they match, the subsystem calls the driver's function probe(). So, the execution of the probe() function can be triggered by the driver registration or the device registration. This also means that the device exists before the execution of probe()
Back to your specific case: SPI. To register a device instance you need to use spi_alloc_device and spi_add_device, or spi_new_device. Where to put this code? This depends on your need. Typically, the SPI devices are declared in some architecture file or device-tree description. Probably you can also do it in a module (not sure).
The spidev is a Linux device driver that exports the SPI raw interface to the user-space. This means that once you register an SPI device instance the driver spidev take control of it. Actually, the spidev does nothing: it waits for an user-space program to read/write data on the SPI bus. So, you will end up writing the driver for your device in userspace.
On my ARM system (Tegra based), I'm running the mainline linux kernel. It uses the device tree system.
I have enabled a hardware driver for the General-Memory-Bus (part of the SoC) in the .dts file by setting its status="okay". Recompiled the dtb and booted the kernel. But no device (/dev/xx) appears.
The driver is compiled into the kernel and can be seen by
cat /lib/modules/$(uname -r)/modules.builtin
The command
cat /sys/firmware/devicetree/base/<path to device>/status
returns "okay".
Do I need to make some kind of "mknod"?
What else is nessesary?
The traditional UNIX "stream of bytes" device model is a pretty high-level abstraction of most modern hardware, and as such there are plenty of drivers which do not create /dev entries for the devices they control largely because they don't fit that model. Bus drivers in particular are very much a case of that - they exist, but only for the sake of discovering and allowing access to the devices behind them; there is no /dev/sata that lets you interact with the actual host controller, sending out raw commands on any old port regardless of what's connected or not; there is no /dev/usb that lets you attempt arbitrary transfers to arbitrary endpoints which may or may not exist.
Furthermore, your typical 'external interface' controller as in this case is orders of magnitude less complex than an interface like SATA or USB - the 'device' itself is often little more than a register block controlling some clocks and a chip-select multiplexer. Even if the driver did create something you could interact with directly, there's not exactly much you could do with it.
The correct way to proceed in this situation is to describe your FPGA device in the DT as a child of the GMI bus, accurately reflecting the hardware, no less, then develop your own driver for that. The bus driver itself just sits transparently in the middle. And if you do want a quick and dirty way to get started by just reading and writing bus addresses directly, well, it's behind a memory-mapped I/O region; that's exactly what /dev/mem exists for.
I am writing a program to read data from a Bluetooth USB dongle. I am using Linux, so I suspect there may be a POSIX library to read from it, or perhaps there is a predefined file descriptor for each USB drive. How do I read a stream of data from a USB port in C?
The most common way of interacting with random USB device is libusb. This provides low-level access to the device, so if you want something more complex (for example, if it's an actual USB drive with a filesystem on it), you might want to use some existing driver for the device rather than trying to interact with it directly.
OK, given the answer above: the PS3 controller is, almost certainly, a HID device. You pair with it like you do any other Bluetooth HID device. It will appear as a joystick (or mouse, or keyboard, as appropriate) automatically once paired, with no software required on your part. This site seems to have a guide, though obviously I haven't tested it: http://www.ydl.net/support/solutions/ydl_6.x/ps3_bluetooth_sixaxis.shtml
I am doing IO programming in C in Ubuntu. And I need the base address of the port to write data.
My laptop dont have a parallel port. So I bought a USB to Parallel port connector. I plugged in the device and its getting detected in /dev/usb/lp0
I ran "lsusb" to see the list of devices and I can see the ID also. But how can I get the base address ? For the usual hardware parallel devices, the base address is 0x0378. this address is not getting detected while using USB to Parallel device.
Please help.
A USB parallel port doesn't have a base address - it's not a meaningful concept for USB. I'm afraid the days of doing I/O on PC hardware via in and out instructions ended a few years ago, though lots of old tutorials still survive on the web.
You can write bytes to the parallel port as a character device, and these will appear on the printer port pins. The USB adapter will expect the other end to handshake data exactly like a printer. If you want to do general I/O prototyping, you're probably better off with a simple USB microcontroller like an Arduino.
Further discussion here.
If you are still interested to use this USB-to-parallel-printer device for your own bit-banging, it's important to know that their built-in firmware always allows controlling of D0..D7, INIT (as outputs), /ERR, ONL, PE (as inputs), but never for /ACK, BUSY (inputs), /STB, /AF, /SEL (outputs) pins.
And you need an 8-bit latch (e.g. 74HCT574) for catching data while strobing.
See here (https://www-user.tu-chemnitz.de/~ygu/bastelecke/PC/USB2LPT/faq#DIY)
especially for possible data rates.
Accessing from software side is a bit complicated but possible, and you may have to re-structure your software and hardware for making such adapters useable. I don't know for Linux case how to access, but IMHO you don't need to write a kernel-mode driver.