I get below mentioned error when I run BCP command for trusted connection:
Copy direction must be either 'in', 'out' or 'format'.
I tried searching MSDN, where it specifies that servername passed could be incorrect.
The command I am trying is:
bcp %SQL_database%..TABLE1 in \FileSERVER\file.dat -f\fileserver\Formats\file.fmt -eERR.txt -m1000000 -C -T RAW -S%SQL_server%
When I pass a username and password instead of using the -T option, it works. The command is executed from command prompt by passing parameters from command line.
Your -C and -T options are flip-flopped - -C -T RAW instead of -C RAW -T.
Check the bcp utility's online documentation for confirmation that -C rather than -T should precede RAW.
Try this instead:
bcp %SQL_database%..TABLE1 in \FileSERVER\file.dat -f\fileserver\Formats\file.fmt -eERR.txt -m1000000 -C RAW -T -S%SQL_server%
My guess is that you probably misplaced the -T option when switching to a trusted connection (with the -T option) from integrated security (with the -U and -P options).
Related
we are exporting data into a csv file by using unix shell script (using snowsql)
below is the script
#!/bin/ksh
snowsql -c newConnection -o log_level=DEBUG -o
log_file=~/snowsql_sso_debug.log -r SRVC_ACCT_ROLE -w LOAD_WH -d
ETL_DEV_DB -s CTL_DB -q "select * from mytable" -o friendly=False -o
header=False -o output_format=pipe -o timing=False>test_file.csv
output starts something like below
|:--------|:-----------|
i dont want to display above lines in my csv file, what is the option that we need to use in my snowsql query?
appricate your response.
Thanks.
Providing my comment as an answer, just in case it works better for you.
I would leverage a COPY INTO command to create a CSV file to an internal stage location:
https://docs.snowflake.com/en/sql-reference/sql/copy-into-location.html
And then use a GET statement to pull the file down to your Unix machine.
https://docs.snowflake.com/en/sql-reference/sql/get.html
This gives you greater control over the output format and will likely perform faster, as well.
I would like to export data with BCP
Below is my command
bcp queryout -i "test.sql" -o"myTable.csv" -S "server\Db" -E /c /t, -T
test.sql has the SQL statemement. I need to keep the SQL in a file as the statement is rather long
I have tested the SQL to be returning values in the management studio
But I get the below errors in the command prompt
Copy direction must be either 'in', 'out' or 'format'.
I have also tried the below variations without much luck
bcp out -i "test.sql" -o"myTable.csv" -S "server\Db" -E /c /t, -T
bcp -i "test.sql" out -o"myTable.csv" -S "server\Db" -E /c /t, -T
bcp -i "test.sql" queryout -o"myTable.csv" -S "server\Db" -E /c /t, -T
The -i specifies input data file. The query has to be part of the command line in the queryout. The bcp tool is quite ancient and didn't improve over the years much.
You might use different tools to do the expert. BCP shines when you need to import data, but exporting can be done efficiently using many other tools.
To output in csv format you can use sqlcmd see How to export data as CSV format from SQL Server using sqlcmd?
I need to execute postgresql queries from command line using psql -c command.
For every psql command, it opens a new tcp connection to connect to the database server and execute query which is a overhead for large number of queries.
Currently I can execute single query like this:
psql -U postgres -h <ip_addr> -c "SELECT * FROM xyz_table;"
When I tried to execute multiple queries as below, but only the last query got executed.
psql -U postgres -h <ip_addr> -c "SELECT * FROM xyz_table; SELECT * FROM abc_table;"
Can anyone help me and tell me the proper way to do it?
-c processes only one command. Without it however psql expects commands to be passed into standard input, e.g.:
psql -U postgres -h <ip_addr> <database_name> << EOF
SELECT * FROM xyz_table;
SELECT * FROM abc_table;
EOF
Or by using echo and pipes.
at least from 9.6.2 this approach works as well:
psql -c "select now()" -c "select version()" -U postgres -h 127.0.0.1
now
2017-12-26 20:25:45.874935+01
(1 row)
version
PostgreSQL 9.6.2 on x86_64-pc-linux-gnu, compiled by gcc (Ubuntu 5.3.1-14ubuntu2) 5.3.1 20160413, 64-bit
(1 row)
Using echo and a pipe to fit it on a single line:
echo 'SELECT * FROM xyz_table; \n SELECT * FROM abc_table' | psql -U postgres
The --file parameter executes a file's content
psql -U postgres -h <ip_addr> -f "my_file.psql"
All the output will be sent to standard output
http://www.postgresql.org/docs/current/static/app-psql.html
I'm trying to set up a simple loop to periodically query a database table in bash. Normally I seem to have to do:
sqsh -s SERV -U user -P passwd -D db -L bcp_colsep=','
then within sqsh I have to type:
select * from some_table where foo=bar
\go -m bcp > /path/to/output.out
I was trying to use the -C option to sqsh to pass in the command like this:
sqsh -s SERV -U user -P passwd -D db -L bcp_colsep=',' -C 'select * from some_table where foo=bar \go -m bcp > /path/to/output.out'
but I keep getting:
Incorrect syntax near '\'.
How can I get the desired effect?
When you use the -C option to pass on a SQL statement to sqsh, the \go command will be implicitly executed. To get the output in 'bcp' result style you need to set the variable 'style=bcp' using the -L parameter or use -mbcp as a commandline parameter and just redirect the output to a file, or use the sqsh -o parameter to specify a filename for output. So basically your command would look like:
sqsh -S SERV -U user -P passwd -D db -L bcp_colsep=',' -m bcp \
-C 'select * from some_table where foo=bar' > /path/to/output.out
HTH, Martin
I am using bcp command in sql server to export data generated from a query to .csv file with the help of following command
*xp_cmdshell bcp EXEC .DBO. QUERYOUT -U -P /c /t, -T -S *
It is working fine and exporting data as expected but now we have a column which contain multilingual data and during exporting with above command data in csv file shows as "????????".
After doing some googling I found some other switch like -w to be used for unicode character but this option is creating unicode file and doesnot open in excel properly(columns are not separted by comma(,))
Can anybody help me if I am missing anything?
/t, is not correct. It should read -t, to set the field delimeter. And -w is the correct flag for unicode. Also I don't think -U/-P is used with -T.
bcp AdventureWorks2012..myTestUniCharData out C:\myTestUniCharData-w.Dat -w -t, -T
See the examples area in the following tech note:
http://technet.microsoft.com/en-us/library/ms188289.aspx
try using -w -T only.
don't add a field delimeter
i dont think "/c" or "/t" are the correct switches. see the documentation here: it should be -c or in your case -w for unicode. try from the cmd line using:
bcp AdventureWorks2012.dbo.myTestUniCharData IN C:\temp\logs\ex170112.log -w -S
localhost\SQLEXPRESS -T
you could also use a format file (.fmt) to tell it to format certain columns. see here.
Using -w switch produces a file with UTF16 format, which is not easy to work with.
If your special characters are covered by ISO 8859-1 characters, then use the switches -C -c in your bcp command. -C makes a ISO 8859-1 file.
The following worked for me to import unicode from text file:
bcp dbo.MyTable in unicode-input.txt -S localhost -T -d EWBKonfig -C 65001 -c -t, -r '0x0A'