substitute a regex in a string in batch - batch-file

I need to delete everything starting with a word from a string in a windows batch script.
For example if I have the string:
This is my line delete from here.
I want to delete everything starting with the word delete and I need to obtain:
This is my line.
I have tryed this:
set line="This is my line delete from here"
set word="delete"
set delete="!word!*";
set line=!line:%delete%=!
It doesn't work what I have tryed, I have activated delayed expansion, and I am not sure if this: "set line=!line:%delete%=!" works. I have tryed this too "set line=!line:!delete!=!" but doesn't work either. I am new with batch scripting.
UPDATE:
In a loop I can only do delayed expansion, and this code doesn't work:
#ECHO OFF
setlocal
for /F "delims= " %%A in (temp.txt) do (
set "line=This is my line delete from here"
ECHO original:%line%:
set "word=delete"
CALL set "delete=%%line:*%word%=%%"
ECHO delete the "%word%%delete%" part
CALL set "line=%%line:%word%%delete%=%%"
ECHO final :%line%:
)
endlocal
Output:
original::
=%" was unexpected at this time.
delete the "" part
=%" was unexpected at this time.
final ::
But if I remove the for from the code above, the output is:
original:This is my line delete from here:
delete the "delete from here" part
final :This is my line :
My question is how can I do the same thing in a loop, with delayed expansion, as with normal expansion. I need in other words late expansion for both variables in the substitution expression the inner and the outer (set "delete=!line:*!word!=!", doesn't work). I can not find any documentation on that.
Thanks.

#ECHO OFF
SETLOCAL
set "line=This is my line delete from here"
ECHO original:%line%:
set "word=delete"
CALL set "delete=%%line:*%word%=%%"
ECHO delete the "%word%%delete%" part
CALL set "line=%%line:%word%%delete%=%%"
ECHO final :%line%:
GOTO :EOF
This should show you the steps.
First, delete the part up to and including the word. Then delete the word and the rest-of-line (in delete)
Note the placement of the quotes - to control the set not the value assigned.

I have read this and the updated code based on Magoo's answer:
#ECHO OFF
setlocal
for /F "delims= " %%A in (temp.txt) do (
set "line=This is my line delete from here"
set "word=delete"
echo line is: !line!
for /f "delims=" %%a in ("!word!") do set delete=!line:*%%a=!
echo delete is: !delete!
for /f "delims=" %%a in ("!word!!delete!") do set line=!line:%%a=!
echo line is: !line!
)
endlocal

Related

Need to copy text from one file to another in batch file

Need to copy text from one file to another.
file1 as below:
locked/agent.jms.remote.host=<AGENTHOST>
locked/agent.jms.remote.port=<AGENTPORT>
file2 will be
locked/agent.jms.remote.host=mkdfvsh_a-2341
locked/agent.jms.remote.port=1234
& need to replace when creating the second file
command i used:
SET newfile=file2
SEt filetoCOpy=file1
for /f "tokens=*" %%i in (%filetoCOpy%) do (
SET "line=%%i"
SETLOCAL EnableDelayedExpansion
SET line=!line:<AGENTHOST>=%AGENTHOST%!
SET line=!line:<AGENTPORT>=%AGENTPORT%!
echo !line!>>%newfile%
)
Result i got
locked/agent.jms.remote.host=<AGENTHOST>
locked/agent.jms.remote.port=<AGENTPORT>
variable value not changing.
Can someone help here what's wrong?
You should be getting an error with the code you posted. The < and > are treated as redirection unless they are escaped or quoted:
SET line=!line:^<AGENTHOST^>=%AGENTHOST%!
SET line=!line:^<AGENTPORT^>=%AGENTPORT%!
or
SET "line=!line:<AGENTHOST>=%AGENTHOST%!"
SET "line=!line:<AGENTPORT>=%AGENTPORT%!"
But you still have at least one problem - If you enable delayed expansion within a loop, then you must ENDLOCAL at the end of the loop, otherwise you can run out of SETLOCAL stack space.
Also, I don't see where AGENTHOST or AGENTPORT is defined.
You can try something like that :
#echo off
SET newfile=file2.txt
SEt filetoCOpy=file1.txt
set "ReplaceString1=mkdfvsh_a-2341"
set "ReplaceString2=1234"
If exist %newfile% Del %newfile%
for /f "tokens=*" %%i in (%filetoCOpy%) do (
SET "line=%%i"
SETLOCAL EnableDelayedExpansion
SET line=!line:^<AGENTHOST^>=%ReplaceString1%!
SET line=!line:^<AGENTPORT^>=%ReplaceString2%!
echo !line!>>%newfile%
)
EndLocal
start "" %newfile%

Setting up variable in for loop in batch

I am fighting with little piece of code for last two days.
In this I am not able to set variable in a for loop.
I want to assign a filename to a variable for string manipulation.
echo off
for /f %%a IN ('dir /b *_ah.ttf') DO (
set /a fName=%%~na
echo %fName%
)
When I echo fName variable I get only last filename repeatedly number of times for for loop count.
(I want to pass this variable as an argument to some batch file as follows
ttfhnt --strong-stem-width=D -i %%a %fName:~0,-3%.ttf
but its failing due to above problem)
Can somebody help me please?
When the cmd parser reads a line or a block of lines (the code inside the parenthesis), all variable reads are replaced with the value inside the variable before starting to execute the code. If the execution of the code in the block changes the value of the variable, this value can not be seen from inside the same block, as the read operation on the variable does not exist, as it was replaced with the value in the variable.
This same behaviour is seen in lines where several commands are concatenated with &. The line is fully parsed and then executed. If the first commands change the value of a variable, the later commands can not use this changed value because the read operation replace.
To solve it, you need to enable delayed expansion, and, where needed, change the syntax from %var% to !var!, indicating to the parser that the read operation needs to be delayed until the execution of the command.
And set /A is only used for arithmetic operations
setlocal enabledelayedexpansion
for /f "delims=" %%a IN ('dir /b *_ah.ttf') DO (
set "fName=%%~na"
echo "!fName!" "!fName:~0,-3!"
)
edited to adapt to comments
While for command is able to execute a command (in the OP code, the dir...), retrieve its output and then iterate over the lines in this output, the original reason for the command is to iterate over a set of files. In this form, the code can be written as
setlocal enabledelayedexpansion
for %%a IN ("*_ah.ttf") DO (
set "fName=%%~na"
echo "!fName!" "!fName:~0,-3!"
)
Now, the for command replaceable parameter will iterate over the indicated set of files. (execute for /? for a list of all the command options).
But as foxidrive points, the problem with delayed expansion are the exclamation signs. Without delayed expansion, they are another normal character, but with delayed expansion they frequently become a problem when a value containig them is assigned/echoed.
A quick test
#echo off
setlocal enabledelayedexpansion
set "test=this is a test^!"
echo ---------------------
set test
echo ---------------------
echo delayed : !test!
echo normal : %test%
for /f "delims=" %%a in ("!test!") do echo for : %%a
Will show
---------------------
test=this is a test!
---------------------
delayed : this is a test!
normal : this is a test
for : this is a test
Obviously when the value is a file name, this behaviour will make the code find or not the file.
Depending on the case different solutions can be used, but usually it involves the activation / desactivation of the delayed expansion behaviour (beware, the endlocal removes any change in environment variables from the previous setlocal).
#echo off
setlocal enabledelayedexpansion
set "test=this is a test^!"
echo ---------------------
set test
echo ---------------------
echo delayed : !test!
rem Commuted to no delayed expansion
setlocal disabledelayedexpansion
echo normal : %test%
endlocal
rem Cancelled the initial enable delayed expansion
for /f "delims=" %%a in ("!test!") do endlocal & echo for : %%a
rem The last endlocal has removed the changes to the variable
echo no data : [%test%]

Replace string with a new line in Batch

set NLM=^
set NL=^^^%NLM%%NLM%^%NLM%%NLM%
SET memoli=%token:QMZ=%NL%%%
echo %memoli%>>%tmp%\list2.txt
I cant change the string "QMZ" with a new line. How to do that?
Very simple
setlocal EnableDelayedExpansion
set "token=HelloQMZworld"
echo !token:QMZ=^
!
It works as the batch parser parses first the multiline caret and replace it with a single linefeed.
Then in the delayed expansion phase it replaces the QMZ with a single linefeed, which is legal in that phase.
To set a new variable with the replaced string simply use
setlocal EnableDelayedExpansion
set "token=HelloQMZworld"
set newVal=!token:QMZ=^
!
echo !newVal!
set LF=^
rem ** Two empty lines required
FOR /F "delims=" %%a in ("%token:QMZ=!LF!%") do (
echo %%a>>%tmp%\list2.txt
)
I was just wandering in the codes and I just did this unconsciously. But it does the trick.

Batch file to create multiple variables from single lines in a text file

I have a text file with the names of computer names and corresponding static i.p. addresses in the following format.
COMPUTER NAME:PC ADDRESS=154.100.1.1 MASK=255.255.254.0
COMPUTER NAME:PC2 ADDRESS=100.100.1.1 MASK=255.255.254.0
I would like to take the values from each line and put them as variables in a batch file for use later. Is this possible? The overall goal is to have the values from this easily edited text file to be used in netsh commands in another batch file.
I've looked around and found ways to take lines of a text file and place them in one variable using the snippet below. However, I do not know how to create multiple variables from one line. If someone could help me with this I'd greatly appreciate it!
#echo o
setlocal enabledelayedexpansion
set Counter=1
for /f %%x in (D:\COMP_T.txt) do (
set "comp!Counter!=%%x"
set /a Counter+=1
)
This should work:
#echo off
setlocal EnableDelayedExpansion
set "Count=1"
for /f "tokens=1,2,3,4,5,6,7 delims==: " %%A in (C:\File.txt) do (
set "%%A[!Count!]=%%C"
set "%%D[!Count!]=%%E"
set "%%F[!Count!]=%%G"
set /a "Count+=1"
)
:: Call other batch script here.
endlocal
Example Output:
COMPUTER[1]=PC
COMPUTER[2]=PC2
ADDRESS[1]=154.100.1.1
ADDRESS[2]=100.100.1.1
MASK[1]=255.255.254.0
MASK[2]=255.255.254.0
Here is a solution that avoids the need for delayed expansion. It uses FINDSTR to insert a line number followed by : at the beginning of each line. The search string of "^" is guaranteed to match every line in the file.
The only other issue is to set TOKENS and DELIMS to parse the line properly.
#echo off
setlocal
for /f "tokens=1,4,6,8 delims=:= " %%A in ('findstr /n "^" "d:\comp_t.txt"') do (
set "comp%%A=%%B"
set "addr%%A=%%C"
set "mask%%A=%%D"
set "counter=%%A"
)
To use the set of variables in another batch file, line by line, just parse the lines as done in other answers here, and call the other batch file with the metavariables.
#echo off
for /f "tokens=1,2,3,4,5,6,7 delims==: " %%a in ('type "File.txt" ') do (
echo "computer_name=%%c"
echo "address=%%e"
echo "mask=%%g"
Call "batch script" "%%c" "%%e" "%%g"
)

How to change an image tag url in multiple html files using batch script?

There are more than 10 html files with image tags. Every time we deploy our build onto test site we need to change the img source. for eg <img src=/live/Content/xyz.png />
to <img src=/test/Content/xyz.png />.
After looking around and reading for sometime, i have come up with the following batch script, however i cant figure out how do i go further from here :
for /r %%i in (*.html) do echo %%i
for %%f in (*.html) do (
FOR /F %%L IN (%%f) DO (
SET "line=%%L"
SETLOCAL ENABLEDELAYEDEXPANSION
SET "x= <--------------------WHAT DO I SET HERE?
echo %x%
ENDLOCAL )) pause
This is my first batch script, could anyone please guide me in the right direction?
#ECHO OFF
SETLOCAL enabledelayedexpansion
for /r U:\ %%i in (*.html) do (
echo found %%i
SET outfile="%%~dpni.lmth"
(
SETLOCAL disabledelayedexpansion
FOR /F "usebackq delims=" %%L IN ("%%i") DO (
SET "line=%%L"
SETLOCAL ENABLEDELAYEDEXPANSION
SET "line=!line:/live/=/test/!
echo !line!
ENDLOCAL
)
ENDLOCAL
)>!outfile!
)
pause
GOTO :EOF
How about this development?
Notes:
I've modified your FOR/R to ECHO the HTML file being processed and use %%i rather than switching to %%f. U: is my RAMDRIVE; you'd need to modify that to suit.
outfile is set to generate a filename which matches the HTML filename, but with a .lmth extension (can't update in-place) - it gets that from the ~dpn prefixing the i, which means the drive, path and name of the file %%i. It's quoted to take care of potential spaces in the filename or pathname.
The next logical statement is (for /f...[lines] )>!outfile! which sends any echoed text to a NEW file !outfile!. The enabledelayedexpansion in the second physical line of the batch makes !outfile! the RUN-TIME value - as it is changed within the FOR r outer loop.
Since the actual HTML filename in %%i may contain spaces, it needs to be quoted, hence the 'usebackq' clause in the FOR/F. The delims= clause ensures that the ENTIRE line from the file "%%i" is applied to %%L - not just the first token (well, actually, makes the entire line the first token).
The SET command substitutes the string "/test/" for any occurrence of "/live/" in the RUN-TIME value of the variable lineand assigns the result to line. The resultant value is then ECHOd - which is redirected to outfile
Note that in your original, you would be assigning x in the set x= but echo %x% would have reproduced x as it stood when the line was PARSED because batch substitutes the value of any variable for %var% as part of the parsing phase. Consequently, the line would have become simply ECHO (since x would likely be unassigned) and bizarrely would have reported the echo state (Echo is OFF)
A couple of gatchas here. First, % and some other characters are notoriously hard to process with batch, so be careful. Next, FOR/F will bypass empty lines. This can be overcome if required. Third, this will replace ANY occurrence of /live/ in any case with /test/
Good luck!
Edit to support exclamation marks: 20130711T0624Z
Added SETLOCAL enabledelayedexpansion line and ENDLOCAL just before )>!outfile! to match

Resources