I'm querying mulitple fields using the qf param. But I'm wondering how I can retrieve the field that gave the result.
Example(not a real example):
q={!edismax qf='tag content'}("tablet")AND("pc")
Field values:
doc1:
tag: tablet
content: The test has failled. Use a pc instead.
doc2:
tag: tablet pc
content: The test has worked.
As a result both documents will be returned because they both have the tablet and pc in their tag/content. Is it possible to know that doc2 had both hits in tag and doc1 only had 1 hit in tag and 1 in content? Debugquery doesn't seem to provide information about this.
I know I can increase the importance of a searchfield using the qf boost.
you can either:
use Highlighting
ask for debug info with debugQuery=true and parse the scoring info to find out.
I think 1 is easier, but it imposes some constraints on your fields (they must be stored for example)
Ok based on your response to my question.
Unfortunately, there is no way Solr currently returns which fields matched the query as part of your defaulting result docs . If the query is simple, looping over the returned stored fields is probably your best bet. Highlighting is be an option too.
There are couple of other options suggested here : http://grokbase.com/t/lucene/solr-user/117nkf36nq/determine-which-field-term-was-found
Related
I am trying to do a solr dismax query over multiple fields, and am a little confused with the syntax.
My core contains a whole load of podcast episodes. The fields in the index are EPISODE_ID, EPISODE_TITLE, EPISODE_DESC, and EPISODE_KEYWORDS.
Now, when I do a query I would like to search for the query term in the EPISODE_TITLE, EPISODE_DESC, and EPISODE_KEYWORDS fields, with different boosts for the different fields.
So when I search for 'jedi', the query I've built looks like this:
http://localhost:8983/solr/episode_core/select?
&defType=dismax&q=jedi&fl=EPISODE_ID,EPISODE_TITLE,EPISODE_DESC,EPISODE_KEYWORDS
&qf=EPISODE_TITLE^3.0+EPISODE_DESC^2.0+EPISODE_KEYWORDS
However, this doesn't seem to work - it returns zero records.
When I put a default field like below, it now works, but this is kind of crap because it means I'm not getting results from searching all of the 3 fields:
http://localhost:8983/solr/episode_core/select?&df=EPISODE_DESC
&defType=dismax&q=jedi&fl=EPISODE_ID,EPISODE_TITLE,EPISODE_DESC,EPISODE_KEYWORDS
&qf=EPISODE_TITLE^3.0+EPISODE_DESC^2.0+EPISODE_KEYWORDS
Is there something I am missing here? I thought that you could search over multiple fields, and I thought that the 'qf' parameter would mean you didn't need to supply the default field parameter?
All help much appreciated...
Your idea is correct. If you've defined qf (query fields) for Dismax, there shouldn't be any need to specify a df (default field).
Can you be more specific about what isn't working?
Also, read up on Configuration Invariants in solrconfig.xml as it is possible your configuration could be sending some different parameters than you've specified in the URL.
(E.g. if you're seeing a specific error message asking you to provide a df)
Whenever i query with q=: it shows all the documents but when i query with q=programmer 0 docs found.(contents is the default search field)
my schema has: id(unique),author,title,contents fields
Also query works fine for:
q=author:"Value" or q=title:"my book" etc, only for contents field no results.
Also when i query using spell checker(/spell?q=programmer) output shows spelling suggestions for this word,when 'programmer' is the right word and present in many documents.
I referred the example docs for configurations.
All of a sudden i am getting this,initially it worked fine.
I guess there some problem only in the contents field,but cannot figure it out.
Is it because indexes are not created properly for contents field?
(I am using solr 4.2 on Windows 7 with tomcat as webserver)
Please help.Thanks a lot in advance.
Are you sure you set the default search field? The reason you have this problem might be because you didn't set the <defaultSearchField> field in your schema.xml file. This is why "q=author:value" works while q=WHATEVER doesn't.
The Is used by Solr when parsing queries to
identify which field name should be searched in queries where an
explicit field name has not been used.
But also consider this:
The is used by Solr when parsing queries to
identify which field name should be searched in queries where an
explicit field name has not been used. It is preferable to not use or
rely on this setting; instead the request handler or query LocalParams
for a search should specify the default field(s) to search on. This
setting here can be omitted and it is being considered for
deprecation.
Do you have any data in your instance. try q=*:* and see what it returns. "for" is a stop word, may be it was filtered out. Look for something else as value to test.
I am trying to query Solr with following requirement:
_ I would like to get all documents which not have a particular field
-exclusivity:[* TO *]
I would like to get all document which have this field and got the specific value
exclusivity:(None)
so when I am trying to query Solr 4 with:
fq=(-exclusivity:[* TO *]) OR exclusivity:(None)
I have only got results if the field exists in document and the value is None but results not contain results from first query !!
I cannot understand why it is not working
To explain your results, the query (-exclusivity:[* TO *]) will always get no results, because you haven't specified any result to retrieve. By default, Lucene doesn't retrieve any results, unless you tell it to get them. exclusivity:(None) isn't a limitation placed on the full result set, it is the key used to find the documents to retrieve. This differs from a database, which by default returns all records in a table, and allows you to limit the set.
(-exclusivity:[* TO *]) only specifies what NOT to get, but doesn't tell it to GET anything at all.
Solr has logic to handle Pure negative queries (I believe, in much the same way as below, by implicitly retrieving all documents first), but from what I gather, only as the top level query, and it does not handle queries like term1 OR -term2 documented here.
I believe with solr you should be able to use the query *:* to get all docs (though that would not be available in raw lucene), so you could use the query:
(*:* -exclusivity:[* TO *]) exclusivity:(None)
which would mean, get (all docs except those with a value in exclusivity) or docs where exclusivity = "None"
I have founded answer to this problem. I have made bad assumption how "-" works in solr.I though that
-exclusivity:[* TO *]
add everything without exclusivity field to the data set but it is not the case. The '-' could only exclude things from data set. BTW femtoRgon you are right but I am using it as fq (filter query) not as a master query I have forgotten to mention that.
So the solution is like
-exclusivity:([* TO *] AND -(None))
and full query looks like
/?q=*:*&fq=-exclusivity:([* TO *] AND -(None))
so that means I will get everything does not have field exclusivity or has this field and it is populated with value None.
Imagine an index like the following:
id partno name description
1 1000.001 Apple iPod iPod by Apple
2 1000.123 Apple iPhone The iPhone
When the user searches for "Apple" both documents would be returned. Now I'd like to give the user the possibility to narrow down the results by limiting the search to one or more fields that have documents containing the term "Apple" within those fields.
So, ideally, the user would see something like this in the filter section of the ui after his first query:
Filter by field
name (2)
description (1)
When the user applies the filter for field "description", only documents which contain the term "Apple" within the field "description" would be returned. So the result set of that second request would be the iPod document only. For that I'd use a query like ?q=Apple&qf=description (I'm using the Extended DisMax Query Parser)
How can I accomplish that with Solr?
I already experimented with faceting, grouping and highlighting components, but did not really come to a decent solution to this.
[Update]
Just to make that clear again: The main problem here is to get the information needed for displaying the "Filter by field" section. This includes the names of the fields and the hits per field. Sending a second request with one of those filters applied already works.
Solr just plain Doesn't Do This. If you absolutely need it, I'd try it the multiple requests solution and benchmark it -- solr tends to be a lot faster than what people put in front of it, so an couple few requests might not be that big of a deal.
you could achieve this with two different search requests/queries:
name:apple -> 2 hits
description:apple -> 1 hit
EDIT:
You also could implement your own SearchComponent that executes multiple queries in the background and put it in the SearchHandler processing chain so you only will need a single query in the frontend.
if you want the term to be searched over the same fields every time, you have 2 options not breaking the "single query" requirement:
1) copyField: you group at index time all the fields that should match togheter. With just one copyfield your problem doesn't exist, if you need more than one, you're at the same spot.
2) you could filter the query each time dynamically adding the "fq" parameter at the end
http://<your_url_and_stuff>/?q=Apple&fq=name:Apple ...
this works if you'll be searching always on the same two fields (or you can setup them before querying) otherwise you'll always need at least a second query
Since i said "you have 2 options" but you actually have 3 (and i rushed my answer), here's the third:
3) the dismax plugin described by them like this:
The DisMaxQParserPlugin is designed to process simple user entered phrases
(without heavy syntax) and search for the individual words across several fields
using different weighting (boosts) based on the significance of each field.
so, if you can use it, you may want to give it a look and start from the qf parameters (that is what the option number 2 wanted to be about, but i changed it in favor of fq... don't ask me why...)
SolrFaceting should solve your problem.
Have a look at the Examples.
This can be achieved with Solr faceting, but it's not neat. For example, I can issue this query:
/select?q=*:*&rows=0&facet=true&facet.query=title:donkey&facet.query=text:donkey&wt=json
to find the number of documents containing donkey in the title and text fields. I may get this response:
{
"responseHeader":{"status":0,"QTime":1,"params":{"facet":"true","facet.query":["title:donkey","text:donkey"],"q":"*:*","wt":"json","rows":"0"}},
"response":{"numFound":3365840,"start":0,"docs":[]},
"facet_counts":{
"facet_queries":{
"title:donkey":127,
"text:donkey":4108
},
"facet_fields":{},
"facet_dates":{},
"facet_ranges":{}
}
}
Since you also want the documents back for the field-disjunctive query, something like the following works:
/select?q=donkey&defType=edismax&qf=text+titlle&rows=10&facet=true&facet.query=title:donkey&facet.query=text:donkey&wt=json
Solr newbie here.
I have created a Solr index and write a whole bunch of docs into it. I can see
from the Solr admin page that the docs exist and the schema is fine as well.
But when I perform a search using a test keyword I do not get any results back.
On entering * : *
into the query (in Solr admin page) I get all the results.
However, when I enter any other query (e.g. a term or phrase) I get no results.
I have verified that the field being queried is Indexed and contains the values I am searching for.
So I am confused what I am doing wrong.
Probably you don't have a <defaultSearchField> correctly set up. See this question.
Another possibility: your field is of type string instead of text. String fields, in contrast to text fields, are not analyzed, but stored and indexed verbatim.
I had the same issue with a new setup of Solr 8. The accepted answer is not valid anymore, because the <defaultSearchField> configuration will be deprecated.
As I found no answer to why Solr does not return results from any fields despite being indexed, I consulted the query documentation. What I found is the DisMax query parser:
The DisMax query parser is designed to process simple phrases (without complex syntax) entered by users and to search for individual terms across several fields using different weighting (boosts) based on the significance of each field. Additional options enable users to influence the score based on rules specific to each use case (independent of user input).
In contrast, the default Lucene parser only speaks about searching one field. So I gave DisMax a try and it worked very well!
Query example:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video
You can also specify which fields to search exactly to prevent unwanted side effects. Multiple fields are separated by spaces which translate to + in URLs:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video&qf=features+text
Last but not least, give the fields a weight:
http://localhost:8983/solr/techproducts/select?defType=dismax&q=video&qf=features^20.0+text^0.3
If you are using pysolr like I do, you can add those parameters to your search request like this:
results = solr.search('search term', **{
'defType': 'dismax',
'qf': 'features text'
})
In my case the problem was the format of the query. It seems that my setup, by default, was looking and an exact match to the entire value of the field. So, in order to get results if I was searching for the sit I had to query *sit*, i.e. use wildcards to get the expected result.
With solr 4, I had to solve this as per Mauricio's answer by defining type="text_en" to the field.
With solr 6, use text_general.