Can we add a list of domain like this :
www.google.*
into Remote Site Setting.
Google has a lot of domain :
google.com.ar
google.com.au
google.ca
....
I don't believe you can. See here for an old question that was left unanswered.
Remote Site Settings are only for HTTP calls you make from Salesforce out to another server, so if you know your contained list for outbound calls you shouldn't have to worry about new ones dynamically being needed. If you want a faster way to update this, take a look at the Metadata API, which should let you bulk change the values through underlying XML (with the caveat that you need at least one Remote Site defined in the org first).
Related
In OSB Layer when the endpoint uri is changed, I need to alert the core group that the endpoint has changed and to review it. I tried SLA Alert rules but it does not have options for it. My question is, the endpoint uri should be saved somewhere in the underlying database. If so what is the schema and the table name to query it.
URI or in fact any other part of OSB artifact is not stored in relational database but rather kept in memory in it's original XML structure. It can be only accessed thru dedicated session management API. Interfaces you will need to use are part o com.bea.wli.sb.management.configuration and com.bea.wli.sb.management.query packages. Unfortunately it is not as straightforward as it sounds, in short, to extract URI information you will need to:
Create session instance(SessionManagementMBean)
Obtain ALSBConfigurationMBean instance that operates on SessionManagementMBean
Create Query object instance(BusinessServiceQuery) an run it on ALSBConfigurationMBean to get ref object to osb artifact of your interest
Invoke getServiceDefinition on your ref object to get XML service
definition
Extract URI from XML service definition with XPath
Downside of this approach is that you are basically pooling configuration each time you want to check if anything has changed.
More information including JAVA/WLST examples can be found in Oracle Fusion Middleware Java API Reference for Oracle Service Bus
There is also a good blog post describing OSB customization with WLST ALSB/OSB customization using WLST
The information about services and all its properties can be obtained via Java API. The API documentation contains sample code, so you can get it up and running quite quickly, see the Querying resources paragraph when following the given link.
We use the API to read the service (both proxy and business) configuration and for simple management.
As long as you only read the properties you do not need to handle management sessions. Once you change the values, you need to start a session and activate it once you are done -- a very similar approach to Service bus console.
I would like to accesss the sitecore DB and items from console application like
Sitecore.Data.Database db = Sitecore.Context.Database
or
Sitecore.Data.Database db = Sitecore.Data.Database.GetDatabase("master")
how do I configure and setup my console application to access the DB as above?
Thanks Everyone for the suggestion, I am really interested in config changes, I used webservice, but it has very limited methods. For example, if I would like create an Item with the template and insert the item with prepopulated value, there is no such option. The reason I am looking for the console apporach is I would like to import the contents from XML or excel sheet and push those to the sitecore tree, eventually use the scheduled task to run the console app periodically. I do not want to copy the entire web.config and app_config. If anyone has already done this, could you please post your steps and necessary config changes?
You have two options I think:
1) Import the Sitecore bits of a website's web.config into your console application's app.config, so that the Sitecore API "just works"
I'm sure I read a blog post about this, but I can't find the reference right now. (I will have another look) But I think the simple but long winded approach is to copy all of the <sitecore/> element and all the separate files it references. I'm fairly sure you can whittle this down to a subset of the config required for data access with a bit of thinking.
2) Don't use the Sitecore API directly, connect to a web service that exposes access to it remotely.
There are a few of these that already exist. Sitecore itself exposes one, Sitecore Rocks has one, and Hedgehog TDS has one too. And you can always write your own (since any web service running inside the Sitecore ASP.Net app can make database calls and report values back and forth - just remember to consider security if this web service might end up exposed externally for any reason)
John West links to some relevant stuff here:
http://www.sitecore.net/Learn/Blogs/Technical-Blogs/John-West-Sitecore-Blog/Posts/2013/09/Getting-Data-Out-of-the-Sitecore-ASPNET-CMS.aspx
-- Edited to add --
I've not found the blog post I remember. But I came across this SO thread:
Accessing Sitecore API from a CLI tool
which refers to this blog post:
http://www.experimentsincode.com/?p=232
which I think gives the info you'll need for option 1.
(And it reminds me that, of course, when you copy the config stuff you have to copy the Sitecore binaries into your app's folder as well)
I would just like to expand on #JermDavis' post and note that Sitecore isn't a big fan of being accessed when not in a web application. However, if you still want to do this, you will need to make sure that you have all of the necessary configuration settings from the web.config and App_Config of your site in your console application's app.config file.
Moreover, you will never be able to call Sitecore.Context in a console application, as the Sitecore Context sits on top of the HttpContext which means that it must be an application and have a valid request for you to use it. What you are looking for is something more along the lines of Sitecore.Configuration.Factory.GetDatabase("master").
Good luck and happy coding :)
This sounds like a job for the Sitecore Item Web API. I use the Sitecore Item Web API whenever I need to access Sitecore data from the master database outside the context of the Content Management server or outside of the context of the Sitecore application. The Web API definitely does not allow you to do everything that the standard Sitecore API does but it can act as a good base and I now extend upon the Web API instead of writing my own custom web services whenever possible.
Thanks to JemDavis's advise.
After I copied the configuration and made changes to config section to get rid of conflicts. I copied almost all of Sitrecore, analytics and lucene dlls, it worked great.
Only thing you have to remember is, copy the app_config folder to the same location where your dlls are.
Thanks again JemDavis....
Is this possible to prevent database connection while I requests concrete action in Zend Framework 2?
As Sam stated in a comment; if you do not wish to establish a connection to the database, then simply don't. If you do not have any code within your controller action that uses the database, then there won't be a database connection (provided that you are not doing funky stuff in a bootstrap method or similar).
If you are building a database connection in the standard way, then the actual connection will be lazily loaded, meaning that there won't be an actual connection before you try to use it.
In your comment you state that you believe the problem is caused by many database connections. I just want to clarify that there will only be one database connection per request (provided that you make use of the database).
If you have no code that calls a database, then your web server won't actually make a connection to your database. Either way, if you have 150+ images per page, then that would be a bigger concern and is probably the root cause for slow page loads. Perhaps consider pagination or if you do not display the pictures in their full sizes, then avoid scaling them in HTML as you would then be sending lots of unnecessary data from your web server to your visitors. You could resize the pictures in PHP when they are added, for instance. After that, you could even consider using a Content Delivery Network (CDN), but that is a different discussion...
I am building a website (probably in Wordpress) which takes data from a number of different sources for display on various pages.
The sources:
A Twitter feed
A Flickr feed
A database on a remote server
A local database
From each source I will mainly retrieve
A short string, e.g. for Twitter, the Tweet, and from the local database the title of a blog page.
An associated image, if one exists
A link identifying the content at its source
My question is:
What is the best way to a) store the data and b) retrieve the data
My thinking is:
i) Write a script that is run every 2 or so minutes on a cron job
ii) the script retrieves data from all sources and stores it in the local database
iii) application code can then retrieve all data from the one source, the local database
This should make application code easier to manage - we only ever draw data from one source in application code - and that's the main appeal. But is it overkill for a relatively small site?
I would recommend putting the twitter feed and flickr feed in JavaScript. Both flickr and twitter have REST APIs. By putting it on the client you free up resources on your server, create less complexity, your users won't be waiting around for your server to fetch the data, and you can let twitter and flickr cache the data for you.
This assumes you know JavaScript. Once you get past JavaScript quirks, it's not a bad language. Give Jquery a try. JQuery Twitter plugin Flickery JQuery plugin. There are others, that's just the first results from Google.
As for your data on the local server and remote server, that will depend more on the data that is being fetched. I would go with whatever you can develop the fastest and gives acceptable results. If that means making a REST call from server to sever, then go for it. IF the remote server is slow to respond, I would go the AJAX REST API method.
And for the local database, you are going to have to write server side code for that, so I would do that inside the Wordpress "framework".
Hope that helps.
I'm working on building a Silverlight application whereas we want to be able to have a client hit a url like:
http://{client}.domain.com/
and login, where the {client} part is their business name. so for example, google's would be:
http://google.domain.com/
What I was wondering was if anyone has been able, in silverlight, to be able to use this subdomain model to make decisions on the call to the web server so that you can switch to a specific database to run a query? Unfortunately, it's something that is quite necessary for the project, as we are trying to make it easy for their employees to get their company specific information for our software.
Wouldn't it work to put the service on a specific subdomain itself, such as wcf.example.com, and then setup a cross domain policy file on the service to allow it to access it?
As long as this would work you could just load the silverlight in the proper subdomain and then pass that subdomain to your service and let it do its thing.
Some examples of this below:
Silverlight Cross Domain Services
Silverlight Cross Domain Policy Helpers
On the server side you can check the HTTP 1.1 Host header to see how the user came to your server and do the necessary customization based on that.
I think you cannot do this with Silverlight alone, I know you cannot do this without problems with Javascript, Ajax etc. . That is because a sub domain is - for security reasons - treated otherwise than a sub-page by the browsers.
What about the following idea: Insert a rewrite rule to your web server software. So if http://google.domain.com is called, the web server itself rewrites the URL to something like http://www.domain.com/google/ (or better: http://www.domain.com/customers/google/). Would that help?
Georgi:
That would help if it would be static, but alas, it's going to all be dynamic. My hope was to have 1x deployment for the application, and to use the http://google.domain.com/ idea to switch to the correct database for the user. I recall doing this once when we built an asp.net website, using the domain context to figure out what skin to use, etc.
Ates: Can you explain more about what you are saying... sounds like you are close to what I am trying to come up with. Have you seen such a tutorial for this?
The only other way I have come up with to make this work is to have a metabase that when the user logs in, it will switch them to the appropriate database as required... was just thinking as well that telling Client x to hit:
http://ClientX.domain.com/ would have been sweeter than saying to hit http://www.domain.com/ and login. It seemed as if they were to hit their name, and to show it personalized for them right from the login screen would have been much more appealing for the client base.
#Richard B: No, I can't think of any such tutorial that I've seen before. I'll try to be more verbose.
The server-side approach in more detail:
Direct *.example.com to the same IP in your DNS settings.
The backend app that handles login checks the Host HTTP header (e.g. the "HTTP_HOST" server variable in some platforms). That would contain the exact subdomain.example.com that the client used for reaching your server. Extract the subdomain part and continue...
There can also be a client-side-only approach. I don't know much about Silverlight but I'm assuming that you should be able to interface Silverlight with JavaScript. You could read document.location with JavaScript and pass it to your Silverlight applet, whereon further data fetching etc. logic would rely on the subdomain that was passed in by JavaScript.
#Ates:
That is what we did when we wrote the ASP.Net system... we pushed a slew of *.example.com hosts against the web server, and handled using the HTTP headers. The hold-up comes when dealing with WCF pushing the info between the client and the server... it can only exist in one domain...
So, for example, when you have {client}.example.com and {sandbox}.example.com, the WCF service can't be registered to both. It also cannot be registered to just *.example.com or example.com, so that's where the catch 22 is coming in at. everything else I have the prior knowledge of handling.
I recall a method by which an application can "spoof" another domain name in certain instances. I take it in this case, I would need to do such a configuration? Much to research yet I believe.