I'm trying to write C code where it takes in integer inputs, and prints them, unless the newline character ('\n') is entered.
But it never returns the value that I enter.
If I enter 6, I expect it to print 6 but it gives me 54. In fact whatever number I expect, it gives me 48+(my number). Please help!
Here's my code:
#include <stdio.h>
int main(int argc, char *argv[])
{
int counter = 0;
int num;
while (counter <=1)
{
num = getchar();
if (num == '\n')
{
break;
}
counter+=1;
printf("%d", num);
}
return 0;
}
It looks like an ASCII code for your characters is printed.
Use %c to print one character:
printf("%c", num);
Or subtract '0' (the character code of 0) from the value to convert digit characters to the corresponding integer:
printf("%d", num - '0');
That's because you are printing the ascii equivalent of the integer. You can either typecast the input you get, i.e, int(num) after you read it or you can use scanf like this:
int num;
scanf("%d", &num);
Is there a simple way to make sure you're reading a character through scanf. If it were an integer I'd use a do while loop
do{
printf("enter a number");
fehler = scanf(" %d", &x);
getchar();
} while(fehler!=1);
But I'm not fully sure what to do if the input is meant to be a string. I know the alphabets are stored as ASCII values but the if constraints in the while statement don't seem to be working(unless I'm doing it wrong)
char * temp2;
temp2 = malloc(sizeof(string));
do{
printf("PLease enter a string: ");
scanf(" %s", temp2);
getchar();
} while(temp2 <= 'A' && temp2 <= 'z')
You can't compare a string to a single character. You have to loop through the entire string, checking every character.
#include <ctype.h>
int is_alphabetic(char *str) {
for (int i = 0; str[i]; i++) {
if (!isalpha(str[i])) {
return 0;
}
}
return 1;
}
...
do{
printf("Please enter an alphabetic string: ");
scanf(" %s", temp2);
getchar();
} while(!is_alphabetic(temp2));
You see printf and scanf work independently. Whatever you store be it a character or number is stored in form of a number. Now it depends on the printf function what it demands.
Eg.: If you store 'a' at a location, the number 97 is stored. Now if you print a number it prints 97 and if you demand a character it gives a.
#include <stdio.h>
int main()
{
int i = 97;
printf("%d \n", i);
printf("%c", i);
return 0;
}
See the results. Further char, int , long int are just data types which specify the number of bits that would be resrved for the inputs for the variable.
Execute this program and you'll understand:
#include <stdio.h>
int main()
{
int i;
for (i=97; i <=200 ; i++)
{
printf("%d %c,\t",i,i);
};
return 0;}
This will show you a nmber when printed as a number and then the SAME number read as character.
Note there are no markers in memory to store which type of data it is. It is straightforward stored as number.
scanf is absolutely the wrong tool for this. But if you want to read only alphabetic characters, you can do it easily enough with something like:
char s[32];
if( 1 == scanf(" %31[a-zA-Z]", s) ){ ... }
The %31[a-zA-Z] conversion specifier will match only the literal characters a thru z and A thru Z, and will only consume up to 31 characters of input. You must always use a field width modifier with %s or %[] conversion specifiers to avoid an overflow.
Does anyone know why I am getting a segfault when I run this code? Valgrind tells me that I have "uninitialized value of size 4" on line 13 if( !isdigit(x) ) and an invalid read size 2 on the same line -- address is not stack'd, malloc'd, or free'd.
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <stdbool.h>
int main()
{
int x;
printf("Please enter a number: ");
scanf("%d", &x);
if( !isdigit(x) )
{
printf("You entered %d\n", x);
}
else
{
printf("You did not enter a valid number!\n");
}
return 0;
}
I think that the problem is that if scanf will fail x will be uninitialized.
It is better to enter data in a character array. Otherwise your code has no sense because you are unable to enter a non-number in an object of type int. Moreover if you enter a number the result of using function isdigit can be unexpected.
I compiled your code with g++, resulting in no segfault.
Entering values of:
5, -1, 27, 43545gbb, and gggg
produced results:
5, -1, 27, 43545, and 1729208414
Try the following :
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int main()
{
int x = 0;
char a;
printf("Please enter a number: ");
while(scanf("%d%c",&x,&a) != 2 || a != '\n')
{
printf("Please enter an integer only : ");
do
{
scanf("%c",&a);
}while(a != '\n');
}
printf("You entered %d\n", x);
return 0;
}
The code show you a complex way of how to use scanf. For more information : Working of scanf and checking if input is int
According to the c documentation : isdigit
Prototype:
int isdigit( int ch );
Parameters:
ch - character to classify
Purpose:
Checks if the given character is a numeric character (0123456789).
The behavior is undefined if the value of ch is not representable as unsigned char and is not equal to EOF.
Return value:
Non-zero value (true) if the character is a numeric character, 0 (false) otherwise.
Why the problem on Line 13?. Line 13 is if( !isdigit(x) )
You did not initialize x when you created it on line 8,
Therefore, if an unacceptable value is entered, and processed by scanf() on line 11, it will continue to be uninitialized by the time it gets to the isdigit() function.
The problem is that isdigit() expects The input must be a character with integer value between 0 and 255. Any other value will lead to undefined behavior. Segfaults are one of the possible outcomes of undefined behavior.
There are other ways to implement this, for example:
Here is an example using a char array (string). Note the comments to explain why certain things were done.
int main()
{
//int x;
char x[2]; //Good for only one digit
printf("Please enter an integer with up to 10 digits: ");
//scanf("%d", &x);
scanf("%1s", x); //Edited to allow maximum field width of 1.
// if( !isdigit(x) )
if( isdigit(x[0]) ) //note the "!" was removed for logic to work
{
printf("You entered %d\n", atoi(x)); //note use of atoi() to convert string to int.
}
else
{
printf("You did not enter a valid number!\n");
}
return 0;
}
I'm writing a program in C that is suppose to ask the user for a number.
The number has to be greater than zero and cannot have letters before or after the number. (ie: 400 is valid but abc or 400abc or abc400 is not). I can make my program invalidate everything besides 400abc. How would I make it invalidate an input if it starts valid then turns invalid? (I'm about 2 months into an intro to c class so my knowledge is very limited.)
#include<stdio.h>
int check(void);
void clear_input(void);
main()
{
int num;
printf("Please enter a number: ");
num = check();
printf("In Main %d\n", num);
}
int check(void){
int c;
scanf("%d", &c);
while (c < 0){
clear_input();
printf("Invalid, please enter an integer: ");
scanf("%d", &c);
}
return c;
}
void clear_input(void){
char junk;
do{
scanf("%c", &junk);
}while (junk != '\n');
}
You can also check whether ascii value of each char scanned from user input should lie in range 48-57, It will only then be integer value.
strtol can be used to do it, but it takes some extra work.
After running this code:
char *endptr;
int n = strtol(num_text, &endptr, 10);
n will contain the number. But you still have to check that:
1. *endptr=='\0' - this means strtol didn't stop in the middle. In 400abc, endptr will point to abc. You may want to allow trailing whitespace (in this case, check that endptr points to an all-whitespace string.
2. num_text isn't empty. In this case, strtol will return 0, but an empty string isn't a valid number.
Read the input as a line, using fgets.
Check if all characters are numeric.
If not, it's invalid. If yes, use sscanf to get the line into an int.
Check if the int is in the range; you're done.
Scanf with %d will treat the "400abc" as 400, all the trailing characters would be ignored, so there is nothing to worry about.
If you definitely want to treat "400abc" as an invalid input, then maybe you shouldn't use %d in scanf, use %s instead?
One way is to read the whole line as a string and check by yourself if it contains any non-digits.
The other way is reading the integer and then looking into the input using fgetc() to see if the next character after the detected input is valid. Or you could even use the same scanf() for this:
char delim;
if(scanf("%d%c", &c, &delim) == 2 && !isspace(delim))
// the input is invalid
You can read the number in a character array and validate it by checking if all the characters lie in the ascii range 48 to 57 ( '0' to '9' ) .If so your no. is valid otherwise you can safely regard it as invalid input.Here the the demonstration :
#include<stdio.h>
#include<string.h>
int conv( char * word )
{
int ans=0;
int res=0;
for(int i=0;i<strlen(word);i++)
if(word[i]>='0' && word[i]<='9')
ans=(ans*10) + (word[i] - '0');
else
res=-999;
if(res==-999)
return res;
else
return ans;
}
int main()
{
char a[10];
gets(a);
int b=conv(a);
if(b==-999)
printf("Invalid Entry.\n");
else
printf("Success.No is %d.\n",b);
return 0;
}
You can adjust for negatives as well by checking the first character in the word array to be '-' and adjusting the sign accordingly.
This is C99, so compile with -std=c99
#include <stdio.h>
#include <stdlib.h>
#include <ctype.h>
#include <stdbool.h>
bool getNum(int *n) {
char c, s[10];
if (!scanf("%9s", s))
return false;
for (int i=0; c=s[i]; i++)
if (!isdigit(c))
return false;
*n = atoi(s);
return true;
}
int main() {
int n;
if (getNum(&n))
printf("you entered %d\n", n);
else
printf("you did not enter a number\n");
}
The following is your check function rewritten to fix your problem, so try this:
int check(void){
int n;
char c;
while (EOF==scanf("%d%c", &n,&c) || n < 0 || !isspace(c)){
clear_input();
printf("Invalid, please enter an integer: ");
}
return n;
}
The catch is that I cannot use atoi or any other function like that (I'm pretty sure we're supposed to rely on mathematical operations).
int num;
scanf("%d",&num);
if(/* num is not integer */) {
printf("enter integer");
return;
}
I've tried:
(num*2)/2 == num
num%1==0
if(scanf("%d",&num)!=1)
but none of these worked.
Any ideas?
num will always contain an integer because it's an int. The real problem with your code is that you don't check the scanf return value. scanf returns the number of successfully read items, so in this case it must return 1 for valid values. If not, an invalid integer value was entered and the num variable did probably not get changed (i.e. still has an arbitrary value because you didn't initialize it).
As of your comment, you only want to allow the user to enter an integer followed by the enter key. Unfortunately, this can't be simply achieved by scanf("%d\n"), but here's a trick to do it:
int num;
char term;
if(scanf("%d%c", &num, &term) != 2 || term != '\n')
printf("failure\n");
else
printf("valid integer followed by enter key\n");
You need to read your input as a string first, then parse the string to see if it contains valid numeric characters. If it does then you can convert it to an integer.
char s[MAX_LINE];
valid = FALSE;
fgets(s, sizeof(s), stdin);
len = strlen(s);
while (len > 0 && isspace(s[len - 1]))
len--; // strip trailing newline or other white space
if (len > 0)
{
valid = TRUE;
for (i = 0; i < len; ++i)
{
if (!isdigit(s[i]))
{
valid = FALSE;
break;
}
}
}
There are several problems with using scanf with the %d conversion specifier to do this:
If the input string starts with a valid integer (such as "12abc"), then the "12" will be read from the input stream and converted and assigned to num, and scanf will return 1, so you'll indicate success when you (probably) shouldn't;
If the input string doesn't start with a digit, then scanf will not read any characters from the input stream, num will not be changed, and the return value will be 0;
You don't specify if you need to handle non-decimal formats, but this won't work if you have to handle integer values in octal or hexadecimal formats (0x1a). The %i conversion specifier handles decimal, octal, and hexadecimal formats, but you still have the first two problems.
First of all, you'll need to read the input as a string (preferably using fgets). If you aren't allowed to use atoi, you probably aren't allowed to use strtol either. So you'll need to examine each character in the string. The safe way to check for digit values is to use the isdigit library function (there are also the isodigit and isxdigit functions for checking octal and hexadecimal digits, respectively), such as
while (*input && isdigit(*input))
input++;
(if you're not even allowed to use isdigit, isodigit, or isxdigit, then slap your teacher/professor for making the assignment harder than it really needs to be).
If you need to be able to handle octal or hex formats, then it gets a little more complicated. The C convention is for octal formats to have a leading 0 digit and for hex formats to have a leading 0x. So, if the first non-whitespace character is a 0, you have to check the next character before you can know which non-decimal format to use.
The basic outline is
If the first non-whitespace character is not a '-', '+', '0', or non-zero decimal digit, then this is not a valid integer string;
If the first non-whitespace character is '-', then this is a negative value, otherwise we assume a positive value;
If the first character is '+', then this is a positive value;
If the first non-whitespace and non-sign character is a non-zero decimal digit, then the input is in decimal format, and you will use isdigit to check the remaining characters;
If the first non-whitespace and non-sign character is a '0', then the input is in either octal or hexadecimal format;
If the first non-whitespace and non-sign character was a '0' and the next character is a digit from '0' to '7', then the input is in octal format, and you will use isodigit to check the remaining characters;
If the first non-whitespace and non-sign character was a 0 and the second character is x or X, then the input is in hexadecimal format and you will use isxdigit to check the remaining characters;
If any of the remaining characters do not satisfy the check function specified above, then this is not a valid integer string.
First ask yourself how you would ever expect this code to NOT return an integer:
int num;
scanf("%d",&num);
You specified the variable as type integer, then you scanf, but only for an integer (%d).
What else could it possibly contain at this point?
If anyone else comes up with this question, i've written a program, that keeps asking to input a number, if user's input is not integer, and finishes when an integer number is accepted
#include<stdlib.h>
#include<stdio.h>
#include<stdbool.h>
bool digit_check(char key[])
{
for(int i = 0; i < strlen(key); i++)
{
if(isdigit(key[i])==0)
{
return false;
}
}
return true;
}
void main()
{
char stroka[10];
do{
printf("Input a number: ");
scanf("%s",stroka);}
while (!digit_check(stroka));
printf("Number is accepted, input finished!\n");
system("pause");
}
I looked over everyone's input above, which was very useful, and made a function which was appropriate for my own application. The function is really only evaluating that the user's input is not a "0", but it was good enough for my purpose. Hope this helps!
#include<stdio.h>
int iFunctErrorCheck(int iLowerBound, int iUpperBound){
int iUserInput=0;
while (iUserInput==0){
scanf("%i", &iUserInput);
if (iUserInput==0){
printf("Please enter an integer (%i-%i).\n", iLowerBound, iUpperBound);
getchar();
}
if ((iUserInput!=0) && (iUserInput<iLowerBound || iUserInput>iUpperBound)){
printf("Please make a valid selection (%i-%i).\n", iLowerBound, iUpperBound);
iUserInput=0;
}
}
return iUserInput;
}
Try this...
#include <stdio.h>
int main (void)
{
float a;
int q;
printf("\nInsert number\t");
scanf("%f",&a);
q=(int)a;
++q;
if((q - a) != 1)
printf("\nThe number is not an integer\n\n");
else
printf("\nThe number is an integer\n\n");
return 0;
}
This is a more user-friendly one I guess :
#include<stdio.h>
/* This program checks if the entered input is an integer
* or provides an option for the user to re-enter.
*/
int getint()
{
int x;
char c;
printf("\nEnter an integer (say -1 or 26 or so ): ");
while( scanf("%d",&x) != 1 )
{
c=getchar();
printf("You have entered ");
putchar(c);
printf(" in the input which is not an integer");
while ( getchar() != '\n' )
; //wasting the buffer till the next new line
printf("\nEnter an integer (say -1 or 26 or so ): ");
}
return x;
}
int main(void)
{
int x;
x=getint();
printf("Main Function =>\n");
printf("Integer : %d\n",x);
return 0;
}
I developed this logic using gets and away from scanf hassle:
void readValidateInput() {
char str[10] = { '\0' };
readStdin: fgets(str, 10, stdin);
//printf("fgets is returning %s\n", str);
int numerical = 1;
int i = 0;
for (i = 0; i < 10; i++) {
//printf("Digit at str[%d] is %c\n", i, str[i]);
//printf("numerical = %d\n", numerical);
if (isdigit(str[i]) == 0) {
if (str[i] == '\n')break;
numerical = 0;
//printf("numerical changed= %d\n", numerical);
break;
}
}
if (!numerical) {
printf("This is not a valid number of tasks, you need to enter at least 1 task\n");
goto readStdin;
}
else if (str[i] == '\n') {
str[i] = '\0';
numOfTasks = atoi(str);
//printf("Captured Number of tasks from stdin is %d\n", numOfTasks);
}
}
printf("type a number ");
int converted = scanf("%d", &a);
printf("\n");
if( converted == 0)
{
printf("enter integer");
system("PAUSE \n");
return 0;
}
scanf() returns the number of format specifiers that match, so will return zero if the text entered cannot be interpreted as a decimal integer
The way I worked around this question was using cs50.h library. So, the header goes:
#include <cs50.h>
There you have get_int function and you simply use it for variable initiation:
int a = get_int("Your number is: ");
If a user inputs anything but integer, output repeats the line "Your number is: "; and so on until the integer is being written.
I've been searching for a simpler solution using only loops and if statements, and this is what I came up with. The program also works with negative integers and correctly rejects any mixed inputs that may contain both integers and other characters.
#include <stdio.h>
#include <stdlib.h> // Used for atoi() function
#include <string.h> // Used for strlen() function
#define TRUE 1
#define FALSE 0
int main(void)
{
char n[10]; // Limits characters to the equivalent of the 32 bits integers limit (10 digits)
int intTest;
printf("Give me an int: ");
do
{
scanf(" %s", n);
intTest = TRUE; // Sets the default for the integer test variable to TRUE
int i = 0, l = strlen(n);
if (n[0] == '-') // Tests for the negative sign to correctly handle negative integer values
i++;
while (i < l)
{
if (n[i] < '0' || n[i] > '9') // Tests the string characters for non-integer values
{
intTest = FALSE; // Changes intTest variable from TRUE to FALSE and breaks the loop early
break;
}
i++;
}
if (intTest == TRUE)
printf("%i\n", atoi(n)); // Converts the string to an integer and prints the integer value
else
printf("Retry: "); // Prints "Retry:" if tested FALSE
}
while (intTest == FALSE); // Continues to ask the user to input a valid integer value
return 0;
}
Just check is your number has any difference with float version of it, or not.
float num;
scanf("%f",&num);
if(num != (int)num) {
printf("it's not an integer");
return;
}
This method works for everything (integers and even doubles) except zero (it calls it invalid):
The while loop is just for the repetitive user input. Basically it checks if the integer x/x = 1. If it does (as it would with a number), its an integer/double. If it doesn't, it obviously it isn't. Zero fails the test though.
#include <stdio.h>
#include <math.h>
void main () {
double x;
int notDouble;
int true = 1;
while(true) {
printf("Input an integer: \n");
scanf("%lf", &x);
if (x/x != 1) {
notDouble = 1;
fflush(stdin);
}
if (notDouble != 1) {
printf("Input is valid\n");
}
else {
printf("Input is invalid\n");
}
notDouble = 0;
}
}
I was having the same problem, finally figured out what to do:
#include <stdio.h>
#include <conio.h>
int main ()
{
int x;
float check;
reprocess:
printf ("enter a integer number:");
scanf ("%f", &check);
x=check;
if (x==check)
printf("\nYour number is %d", x);
else
{
printf("\nThis is not an integer number, please insert an integer!\n\n");
goto reprocess;
}
_getch();
return 0;
}
I found a way to check whether the input given is an integer or not using atoi() function .
Read the input as a string, and use atoi() function to convert the string in to an integer.
atoi() function returns the integer number if the input string contains integer, else it will return 0. You can check the return value of the atoi() function to know whether the input given is an integer or not.
There are lot more functions to convert a string into long, double etc., Check the standard library "stdlib.h" for more.
Note : It works only for non-zero numbers.
#include<stdio.h>
#include<stdlib.h>
int main() {
char *string;
int number;
printf("Enter a number :");
string = scanf("%s", string);
number = atoi(string);
if(number != 0)
printf("The number is %d\n", number);
else
printf("Not a number !!!\n");
return 0;
}