is there any way to add new index to a jacrkabbit repository without having a whole repository reindexed?
IE i've configuration file with indexes that looks like this
<?xml version="1.0"?>
<!DOCTYPE configuration SYSTEM "http://jackrabbit.apache.org/dtd/indexing-configuration-1.0.dtd">
<configuration xmlns:nt="http://www.jcp.org/jcr/nt/1.0" xmlns:ns="http://unicorn.eu/ns" xmlns:jcr="http://www.jcp.org/jcr/1.0">
<index-rule nodeType="ns:DMSDocument">
<property>ns:name</property>
</index-rule>
if i change it to this
<?xml version="1.0"?>
<!DOCTYPE configuration SYSTEM "http://jackrabbit.apache.org/dtd/indexing-configuration-1.0.dtd">
<configuration xmlns:nt="http://www.jcp.org/jcr/nt/1.0" xmlns:ns="http://unicorn.eu/ns" xmlns:jcr="http://www.jcp.org/jcr/1.0">
<index-rule nodeType="ns:DMSDocument">
<property>ns:name</property>
<property>ns:fullpath</property>
</index-rule>
</configuration>
is there any way for the new index to take effect without having to reindex whole repository?
You could:
Change the index configuration
Restart or reopen the repository (so the configuration changes are read)
Traverse over all relevant nodes, and 'touch' them (modify a property, for example the last modified time or so). That way the nodes are re-indexed
Related
I am using WSO2 inbound endpoint to fetch a file from an FTP server. And I know how to get the file name back. Now my question is how to get the file uploaded time back (or the last modified time)?
This is the code to get the file name.
<property expression="get-property('transport', 'FILE_NAME')" name="ftp.var.filename"
xmlns:ns="http://org.apache.synapse/xsd"
xmlns:ns2="http://org.apache.synapse/xsd"/>
I think there should be a similar code to get the timestamp of the file.
With the following property, you will be able to get the last modified time of the file polled from the inbound endpoint.
`<property expression="get-property('transport', 'LAST_MODIFIED')" name="ftp.var.last.modified.time" xmlns:ns="http://org.apache.synapse/xsd"/>`
Add this to the relevant sequence to further process and following is a sample sequence in which the file name and the last modified time is logged.
<?xml version="1.0" encoding="UTF-8"?>
<sequence name="fileSequence" onError="fault" xmlns="http://ws.apache.org/ns/synapse">
<log level="custom">
<property expression="get-property('transport', 'FILE_NAME')"
name="ftp.var.filename" xmlns:ns="http://org.apache.synapse/xsd"/>
<property
expression="get-property('transport', 'LAST_MODIFIED')"
name="ftp.var.last.modified.time" xmlns:ns="http://org.apache.synapse/xsd"/>
</log>
</sequence>
Please check whether this meets your requirement and please refer [1] to further clarify this.
[1]-https://github.com/wso2/wso2-synapse/blob/master/modules/transports/core/vfs/src/main/java/org/apache/synapse/transport/vfs/VFSTransportListener.java#L767
I followed youtube videos and articles on net and implemented this. But it never writes to my log file. Tried with all suggestions around many forums with no use.
not sure where I went wrong. I had this inside class library.
app.config file:
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler,log4net"/>
</configSections>
<log4net><appender name="myLogAppender" type="log4net.Appender.RollingFileAppender" >
<file value="D:\\Log4NetLog.txt" /><layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date %level - %message%n" /></layout></appender>
<logger name="myLog"><level value="ALL"></level><appender-ref ="myLogAppender" />
</logger></log4net></configuration>
and in the Assembly.info.cs:
[assembly: log4net.Config.XmlConfigurator(ConfigFile = "app.config", Watch = true)]
and in the class file:
ILog mylog = LogManager.GetLogger("myLog");
string xx = "tokensalt";
mylog.Info(xx);
If you configuration is in you app.config, you do not need to specify the file in the Configurator:
[assembly: log4net.Config.XmlConfigurator()]
Also the watch is not very usefull, when you change the app.config file. The applpication will restart anyway and the file will be reloaded.
If that is not working, I would guess that the path you logging to is not accessible by the web user you are logging with.
->>> <file value="D:\\Log4NetLog.txt"
Make sure you choose a path where you have access.
Use the file appender and not the rolling appender, the rolling appender was made for backup purposes, for example if your file exceeds 10mb then it will write to your rolling appender and you can decide how many files of 10mb you write there, from the log4net site:
RollingFileAppender can roll log files based on size or date or both
depending on the setting of the RollingStyle property. When set to
Size the log file will be rolled once its size exceeds the
MaximumFileSize. When set to Date the log file will be rolled once the
date boundary specified in the DatePattern property is crossed. When
set to Composite the log file will be rolled once the date boundary
specified in the DatePattern property is crossed, but within a date
boundary the file will also be rolled once its size exceeds the
MaximumFileSize. When set to Once the log file will be rolled when the
appender is configured. This effectively means that the log file can
be rolled once per program execution.
Here is a working web.config example that should work for you:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<configSections>
<section name="log4net" type="log4net.Config.Log4NetConfigurationSectionHandler, log4net"/>
</configSections>
<log4net>
<appender name="FileAppender" type="log4net.appender.FileAppender">
<file value="C:\MyLogs\MyLogFile.txt"/>
<appendToFile value="true"/>
<lockingModel type="log4net.Appender.FileAppender+MinimalLock"/>
<layout type="log4net.Layout.PatternLayout">
<conversionPattern value="%date{ABSOLUTE} [%logger] %level - %message%newline%exception"/>
</layout>
</appender>
<root>
<level value="DEBUG"></level>
<appender-ref ref="FileAppender"></appender-ref>
</root>
</log4net>
I am doing a simple file read using WSO2 ESB File connection 2. I try to read a .OUT file from the given directory. It reads the first file (alphabetical order?) well but I have no idea which file is read. Is there a (transport?) property that gets populated when a file is read?
Here is my code in a proxy service
<fileconnector.read>
<source>file:///D:/temp</source>
<filePattern>.*\.OUT</filePattern>
<contentType>text/plain</contentType>
</fileconnector.read>
<log level="full"/>
I get the following response
INFO - LogMediator To: /services/SampleProxy.SampleProxyHttpSoap12Endpoint, WSAction: urn:mediate, SOAPAction: urn:mediate, MessageID: urn:uuid:f5737693-6a51-4044-9134-95cd61eaeaa4, Direction: request, Envelope: <?xml version='1.0' encoding='utf-8'?><soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"><soapenv:Body><text xmlns="http://ws.apache.org/commons/ns/payload">abc,123
qwe,456
</text></soapenv:Body></soapenv:Envelope>
Give it a try like this. (Just a suggestion. I didn't try.)
<log level="custom">
<property name="FileName" expression="$trp:FILE_NAME" />
</log>
If you want to read a particular file, you can pass the full path as a value in source and you can skip the file pattern value.
<fileconnector.read>
<source>file:///D:/temp/abc.OUT</source>
<filePattern></filePattern>
<contentType>text/plain</contentType>
</fileconnector.read>
This is a valid requirement. We will consider this in our future release. Please use [1] to track the progress.
[1] https://wso2.org/jira/browse/ESBCONNECT-192
I have a sqlMapConfig.xml that has three SQLMaps defined in it.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sqlMapConfig
PUBLIC "-//ibatis.apache.org//DTD SQL Map Config 2.0//EN"
"http://ibatis.apache.org/dtd/sql-map-config-2.dtd">
<sqlMapConfig>
<!-- Statement namespaces are required for Ibator -->
<settings enhancementEnabled="true" useStatementNamespaces="true"/>
<!-- Setup the transaction manager and data source that are
appropriate for your environment
-->
<transactionManager type="JDBC">
<dataSource type="SIMPLE" >
<property name="JDBC.Driver"
value="com.mysql.jdbc.Driver"/>
<property name="JDBC.ConnectionURL"
value="jdbc:mysql://localhost:3306/sug"/>
<property name="JDBC.Username"
value="root"/>
<property name="JDBC.Password"
value="admin"/>
</dataSource>
</transactionManager>
<!-- SQL Map XML files should be listed here -->
<sqlMap resource="com/tatakelabs/dbmaps/categories_SqlMap.xml" />
<sqlMap resource="com/tatakelabs/dbmaps/pro_SqlMap.xml" />
<sqlMap resource="com/tatakelabs/dbmaps/pro_category_SqlMap.xml" />
</sqlMapConfig>
I get a runtime error - Cause: java.io.IOException: Could not find resource com/tatakelabs/dbmaps/categories_SqlMap.xml
categories_SqlMap.xml is present in that location. I tried changing the location of the map xml, but that did not help. sqlMapConfig.xml validates against the DTD. categories_SqlMap.xml also validates against the right DTD. I am at my wits end trying to figure out why it can't find the resource. The sqlMap files are generated by iBator.
This was happening because the sqlmap file location was not getting copied to target. Added a copy goal and that fixed it.
I had the same problem. It appears the problem lies with the location of the config file. Thus, its in relation of the project resource structure.
I moved the config file in the same package as the mapper classes and it worked. In this case try moving all the resources to this package and update the resource attributes to:
<sqlMap resource="categories_SqlMap.xml" />
<sqlMap resource="pro_SqlMap.xml" />
<sqlMap resource="pro_category_SqlMap.xml" />
Solved it.
I moved the xml file to where the Pojo was located and provided the path as follows:
<sqlMap resource="com/heena/ibatis/model/jsr/jsr.xml" />
And it worked.
place it ...src\java\abc.xml under the Source Packages directory.
If you are using Spring, you can use a SqlMapClientFactoryBean specifying property "mappingLocations". In this property you can specify a generic path, such as "com/tatakelabs/dbmaps/*_SqlMap.xml" or with a variable such as ${mapfiles}, that will be resolved by Spring as an array of file names. This lets you omit sqlMap element in sqlMapConfig. This technique will run with iBatis 2.3.4 on. However sql-map-config-2.dtd is also contained inside iBatis.jar, so you can experience some parsing errors, as /com/ibatis/sqlmap/engine/builder/xml/sql-map-config-2.dtd may have a bug. In this case you may want to replace it inside the jar with the one from the URL:
http://ibatis.apache.org/dtd/sql-map-config-2.dtd.
i would like to set up an external configuration file that I can store in a directory for my WPF app, not necessarily the directory of my exe when I create my program either.
I created an App.Config file and added System.Configuration to my assembly. My App.Config has:
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<appSettings file="sd.config">
<add key="username" value="joesmith" />
</appSettings>
</configuration>
and my sd.config (external file) which is in the root of my project for now, has
<?xml version="1.0"?>
<appSettings>
<add key="username1" value="janedoe" />
</appSettings>
in my MainWindow cs class I used
string username = ConfigurationManager.AppSettings.Get("username1");
which returns a null string. when i just retrieve the username field from App.Config it works. What did i miss? Thanks so much!
See the documentation on ConfigurationManager:
The AppSettings property:
Gets the AppSettingsSection data for the current application's default
configuration.
You need to do a little extra work to get data that isn't in your application's default configuration file.
Instead of using the file= attribute, add a key to your <appSettings> that defines the location of the secondary config file, like so:
<add key="configFile" value="sd.config"/>
Then, in order to use ConfigurationManager to pull settings from the secondary config file, you need to use its OpenMappedExeConfiguration method, which should look a little something like this:
var map = new ExeConfigurationFileMap();
map.ExeConfigFilename = Path.Combine(
AppDomain.CurrentDomain.SetupInformation.ApplicationBase,
ConfigurationManager.AppSettings["configFile"]
);
//Once you have a Configuration reference to the secondary config file,
//you can access its appSettings collection:
var config = ConfigurationManager.OpenMappedExeConfiguration(map, ConfigurationUserLevel.None);
var userName1 = config.AppSettings["username1"];
That code might not be dead-on for your example, but hopefully it gets you on the right track!