I'm trying to use valgrind with clion in my windows machine. I've gone through the steps of setting up WSL and valgrind on windows.
Although when I try to 'run with valgrind memcheck' in my 'UnixAssembler' project I get the following error:
Error running 'UnixAssembler': File not found: /cygdrive/c/Users/natan/Desktop/UnixAssembler/cmake-build-debug/UnixAssembler.exe
The actual exe is located in c/Users/natan/Desktop/UnixAssembler/cmake-build-debug/UnixAssembler.exe, so I don't know why It's looking in this cygdrive folder.
I'm not sure what to try from here onwards. Any ideas?
Solved:
- Go to File -> Settings -> Build, Execution, Deployment
- Remove any Toolchains other than WSL (making WSL the default will probably work as well)
- Profit
I am putting together a Windows console app in Eclipse c/c++ Neon (Win 10) and Mingw.
When I run the program the output appears in the console window within Eclipse, but I need/want to be able to debug with the program running a a normal Windows console app (like it would in a vs studio console app).
I have tried adding -mwindows to the minGW in Command line pattern and in linker options. I tried a number of other things I found on the web.
I have spent hours searching and nothing seems to do the trick.
1) Create a file named .gdbinit (or it can be named whatever you want, but this one is the conventional)
2) Add a line set new-console on to the file. Save it.
3) Open "Debug Configurations" in the Eclipse, and select your project debug configuration.
4) Go to the "Debugger" tab.
5) Point the "GDB command file" to the file you have created.
Done! now run this debug configuration.
Why wouldn't my Eclipse CDT find an x.dll where I specified via
C C++ General/Paths and Symbols/Libraries (this is the lib name without extension x)
C C++ General/Paths and Symbols/Library Paths (this is full path to dll)?
I'm on Windows 8.1, using CygwinGCC toolchain, debugging via gdb.
The app.exe is built OK, Eclipse project seems to see the dll at this point (for example, if I misspell the dll name, it complains and fails to build). However, when I try to debug the app, I get an ugly unhandled exception message right at startup.
When I manualy copy the needed x.dll to sit in the same directory as app.exe, then I can debug with no problems.
I'm trying to compile a code i made in C in Debian using CDT for Eclipse and i'm having the famouse Binary not found error when i try to compile the code. I already build the code by pressing Ctrl+B and the Debug folder appears, and the code doesn't have any syntax error, but the error still there. After that i tried to make a run configuration for my project but i'm not sure about what to put where it say's C/C++ Application. Which is the best configuration for this problem?
I'm using Debian Squeeze, Eclipse CDT and GCC as compiler
If you have successfully built your project and have an executable you can run (no build errors, project properly configured as executable), just press a "search project" or "browse" button in "debug configurations" dialog and point it to your executable.
I installed Eclipse CDT plugin and also the following packages:
MinSys
MinGW
I have also added paths to their bin in the PATH environment variable. Even then I am unable to compile and run any sample program in Eclipse.
How can I fix this? Thanks for your concern.
I even faced this error and searched a lot to fix. Fortunately, I figured it out myself.
The following are the things you need to make sure they are set:
Window > Preferences > C/C++ > New CDT project wizard > Makefile Project > Binary Parsers
a) Set it to PE Windows Parser if you are on windows.
b) Set it to Cygwin PE Parser if you are using Cygwin
c) Set it to Elf parser if you are using ubuntu
Window > Preferences > C/C++ > Build > Environment
Now click on "select" and select "Path" variable so that you add you path variables in Eclipse.
Now its all done!
All you have to do is write a test program and press Ctrl+B (Build all; there is a button on menu bar) and after that click "Run".
After all the setup is done.Go to eclipse project --> build all or Ctrl + B then eclipse automatically build up the binaries and other stuffs now run your project
Open project properties (Right click on your project, choose Properties on the menu)
C/C++ Build -> Settings
Click on Binary Parsers tab and check PE Windows Parser
In my case
I just save the programme. Press Ctrl + B to build it.
Refresh it.
Then run the programme.
Now you can see this will work fine.
Build
Refresh the project. A new folder named Binaries will appear now in project explorer.
Now Run :)
This problem happened with me. I found the problem that the anti-Virus that I am using considered the binary file as a Trojan and disable the Eclipse from successfully build it. You need to disable the auto-Protection mode, then build the project and run.
Just happened to me and it was a bit silly.
Eclipse didn't show any errors but apparently there was one in the console window.
Double-check that everything's okay there.
Same issue, but on Mac OS on Eclipse Kepler. Fixed with the following configuration
Right click project->properties->C/C++ General->Run/Debug Settings.
I didn't see any launch configuration. So, I created new and input the following entries. Problems is the name of the application :-). Remember that this will only work for Debug project, not for Release or you will have to update the build setting again. Hope this helps.
Select FCC and CDT as your default builder for project. This could help you to solve the problem. By the way, I also encourage you to use Geany program instead. It works ok as well. It's ready to use just only install gcc through MinGW.
I managed to fix this problem by changing the default builder from CDT Internal to GNU Make, by right clicking the project → Properties → C/C++ Build → Tool Chain Editor → Current builder → GNU Make Builder.
Similar problem was faced by me. Once you are within Eclipse IDE try doing the following.
Windows -> Preferences -> C/C++ -> Build -> Environment -> (Add environment variables) -> Click on select all) -> OK
Now, in the same dialog box
New C/C++ project -> Make file project -> Choose Respective Parser* -> Click on Apply and Apply and Close.
Choosing a parser
For Linux - Choose 'Elf Parser' or 'GNU Elf Parser'
For Windows - Choose 'PE Windows Parser'
For Mac OS - Choose 'Mach-o Parser' or 'Mach-o 64 Parser'
Try Building your program and running it. If you still find the Binary Failed Error, Do the following :
Click on Run -> Run Configuration -> C/C++ Application -> click on project_name debug -> click on browse and select your project file -> Press Ok -> below it Browse binary file ( Goto your Eclipse Workspace and select your project file -> You'll find two files 1.Debug 2.Src -> Click on Debug file -> Next click on the file with your project name and Press ok) -> then click apply and press run button.
This should solve the problem.
add third party libraries if in case you are trying to compile OPEN SANKORE project in other projects try to install third party libraries to linux
sudo apt-get install zlib1g-dev libjpeg62-dev libtiff4-dev libmng-dev libpng12-dev
libdirectfb-dev libgstreamer-plugins-base0.10-dev libgstreamer0.10-dev libpulse-dev libaudio-
dev libasound2-dev libfreetype6-dev libfontconfig1-dev libts-dev libcups2-dev libdbus-1-dev
libglib2.0- dev libgtk2.0-dev libx11-dev libxext-dev libxcursor-dev libxfixes-dev libxrandr-
dev libxrender-dev libxv-dev libxinerama-dev libxi-dev libsm-dev libssl-dev libphonon-dev
libt1-dev libpaper-dev
I faced the same problem and tried above methods but no use and when I tried to execute in command prompt it gave me "Application not launched properly ...." error and then I tried with code block it gave me "Application not launched properly..." error. Then I downloaded MinGW from
http://www.equation.com/ It started to work
Even I have faced this similar problem and reason behind this problem is pretty simple that compiler failed to get binary file of your written code.
So where is your mistake ?
Answer is there is something wrong in your eclipse installing process. Yes you have not installed it correctly
Here is solution
First thing is no one know where is defect in installing process even you don't know about that.
and here is tutorial "How to install eclipse correctly".
How to Install Eclipse On Windows for C and C++ Correctly
Trust me after watching this you will find your mistake and binary will be found by your compiler.
Watch this whole 8 minute video, this is only solution I found after 7-8 days of hard work.
I had the same Issue of "binary not found" and I had tried all of the solutions but unfortunately nothing worked. I was trying stuff and found out that when I switched my current toolchain(right click on project click settings->c/c++ build->tool chain editor) Cross GCC to Cygwin GCC, clean all build all and guess what ? I am able to run !!