I have an issue with Click Once version number when publishing. In short, it does not start out at the current version, so I have to "publish" it repeatedly until it gets up to the right number. I am sure it is because the published version number is getting lost in the publish process, but I don't know where to look.
This is the publish process:
Dev machine modifies the app, then zips the VS project and send to the person who publishes it.
The former version files are deleted, then the new zip is unzipped, the project recompiled and published. It always starts from V1.0.0.15, and then increments one each time until we get up to the actual version.
So the question is, where is the V1.0.0.15 being stored? How to I get it to start out on the actual version number?
Greg
OK, I found it. Right click on the project, select properties, then click the publish tab. There it can be manually updated.
Related
That is the case as of last night. Does not work for CPU or GPU "compute type"
Basically, after pressing the "Start runtime" button, it says "Preparing project runtime..." for about ten minutes and then stops. It shows the following error, "There was a problem when starting the project runtime. This should be resolved shortly. Please try again later."
I have now tried it about five times over last night and this morning.
There is no way to even access the work that is saved there. The "project" will not boot up.
Basically it is a dud at this point.
Is anyone else experiencing similar issues? What does one do?
The issues/questions and answers that I have learned since (because I was asked to clarify):
(1) The environment on Sagemaker Studio Lab is supposed to be persistent. I.e., any time one starts it, the environment, files uploaded, etc. are where it was left last. However, I was not able to start the environment any longer. Before it locked out, it would start fine. Consequently, I was not able to get to my saved work in any way shape or form. I was wondering if anyone has had this issue
Answer: Thus far not too many people are approved for Sagemaker Studio Lab. So, I may have been the first or one of the first to encounter this issue. As of this writing there does not exist a way to access ones data if one cannot spin up a virtual machine that would have access to the data using their "Start runtime" button.
(2) It is not clear where one is supposed to report issues with Sagemaker Studio Lab. On one's home page in Studio Lab, it has a link to StackOverflow under "Get answers and help others". That is how I ended up here. Though, I should have included the following hashtag (#amazon-sagemaker pointing to https://stackoverflow.com/questions/tagged/amazon-sagemaker).
Answer: I eventually found where people are submitting bug reports. And I reported the issue there (see issue 56). https://github.com/aws/studio-lab-examples/issues
(3) It was not clear to me if I was to delete my account and request a new one if I would be put on a waitlist (which supposedly is presently long). I.e., this would be the manual factory reboot option where one still loses all of ones work, but, at least has an opportunity to start again with the environment.
Answer: Once one is approved, one does not go to the waitlist. Deleting my account, requesting a new one, and setting it up to the initial state took a couple of minutes for me. And yes, I lost all my work that was on there. So, back stuff up as it was your computer in the `80s. I.e., back up externally to that environment.
I signed up for ASMSL about 2 weeks ago. As of this evening (Feb 15) I'm able to log into my runtime without any trouble at all.
I created a flow from the process builder , and I want to sync it locally.
When I looked at the project from mavensmate , I couldn't find the file which is named .flow
This is my first question in stackoverflow , I'm sorry about my poor english , hope you can understand what I described . who could give me some suggestions?
Thanks!
First, you need to update your local SF project metadata. For that, in SublimeText, go to MavensMate menu -> Project -> Edit Project. It should open the project metadata tab in your browser. Click the "Refresh" button and then choose the flow that you need in your project tree. Click "Update project". After that you should be able to find the flow in your project folder.
Go into Mavensmate's settings.
Add ".flow" to the list of extensions under "SALESFORCE FILE EXTENSIONS (MM_APEX_FILE_EXTENSIONS)" if it isn't there already.
You might want to update "SALESFORCE API VERSION (MM_API_VERSION)" to the latest as well.
If your still having problems with that, you might want to check the Flow names including the version numbers. In my case, Mavensmate shows Versions 1, 2, 3, and has no number after the current (active) version. The file on my hard drive is labelled as version 4, so the names don't match up.
To fix this, you'll want to deactivate the processes and update your project.
Running WSo2 EMM 1.1.0, everything has been working just fine except for one big issue.
From the moment I first click on an app in the App Management tab, the WSO2EMM_DB.h2.db file starts to steadily grow as long as the server is running, even with absolutely no changes. Eventually, it gets so big that clicking an app on that tab takes a ridiculously long time to load the list of devices using the app. We're talking 5+ minutes, it becomes completely unusable. I have checked the error logs and found no errors at all, every time.
Restarting the server does nothing to correct the issue. Even if I click an app on the App Management tab once, and never again, the database file will continue to grow. Even restarting the server and not logging into the EMM page, it will continue to grow.
The only thing I've found so far that can possibly help is keeping backup copies of the database file and overwriting the current file when it gets too big. Obviously that's not a solution, as I'd need to create a new backup file every time there's a change on the server, and eventually the database file would grow too big from that too.
It's not an issue with the H2 database either. Not only have I tried starting over fresh several times and have had the same behavior, but here is the only info I could find regarding this issue, and they were having the issue regardless of whether or not it was on H2 or MySQL.
I've been trying to find a solution for this for over a month with no success. Any help would be appreciated!
EDIT: It looks like this might be the subject of EMM-826. Unfortunately there seems to be no response to that bug report so far.
EDIT 2: EMM-826 was closed with a message saying the following:
This issue is fixed in the EMM 1.1.0 GA latest pack. Please get all the patches for the product/build the product from the latest source [ https://github.com/wso2/product-emm ] and try again.
Unfortunately, that did not work for me. I'm not sure what exactly I'm doing wrong, so I'll list the what I did to try to fix it:
Downloaded the EMM 1.1.0 zip from http://wso2.com/products/enterprise-mobility-manager/.
Downloaded the zip from https://github.com/wso2/product-emm and pasted the files from that into my EMM_HOME directory.
When that didn't work, I searched for patches and found I was only using patches 1-6. In the documentation I found I could download patches 7-12 here. Patches 9 and 10 didn't work right for some reason; causing me not to be able to reach the EMM dashboard or publisher. I could only access the Carbon manager. I was able to make patches 7, 8, 11, and 12 work though - with no change in behavior.
Here are the steps I take to reproduce the issue:
After setting a fresh copy of the EMM up, I log in to the EMM dashboard as Admin, set up a user account, and upload an app through the Publisher.
Register a device to the user account I set up. In this case, an Android device running Android 4.2.2.
From the dashboard, I go to App Management and click the app I uploaded. The list of devices loads, but from that point on, the database file starts growing and eventually, after several hours, becomes so large it the device list will never load.
Please help!
Found this happening also, from a quick look it's the WSO2EMM_DB.notifications table. Seems to keep a history of all notifications over time, and the info for app installs is taken from non-optimized queries, which degrade as the table grows. You 'could' delete all rows from the table, and it will re-populate as devices 'check back' and report their info.
But you'd probably want to write a query to just keep the latest notification of each type of each user (I'll leave that to someone else...) and as was mentioned, it is apparently fixed in the latest version.
Issue appears to be resolved in EMM 2.0, which can be found here.
I recently upgraded both Drupal and CiviCRM to the latest versions. Drupal works fine, and so does Civi except when I move to the Civi menu, I get a message that says "Database check failed - the database looks to have been partially upgraded. You may want to reload the database with the backup and try the upgrade process again." This happened earlier and reloading the most recent backup didn't help. We had to go back quite a ways before we found one that did, then had to reload a lot of data from .CSV files and by hand. I'd rather not go through with that again.
One thing we found when comparing the development site on my WAMP desktop (which was a new install that works well) with the one on my ISP's server is that the server version contained two MyISam-format files from, or generated by, CiviCase where Civi wants to see InnoDB-format files. My ISP, far more knowlegable than I am about MySQL, converted these two files two InnoDB and the problem remains. This leaves me with two questions:
could the MyISam files be the source of the "incomplete upgrade"? and
is there some way to reset a flag that tells Civi that the database is incomplete or to run the database check manually?
Thanks for any help. Civi seems to work OK as is, but the error message will be disturbing to my end users.
That message happens when you have begun the CiviCRM database upgrade but it hasn't finished. CiviCRM edits the version number in the civicrm_domain table to flag that you're in the middle of an upgrade, and when the upgrade completes, it should remove that.
The simple way to remove the message is to go edit that in the database, but it gets set there for a reason: your database upgrade never completed.
You should restore everything to the last version where it all was working--restore both the code and the database. Play around for a bit and make sure nothing funny is happening.
Run a normal CiviCRM upgrade, replacing the files and running the upgrade script. Take note of anything that seems funny when the upgrade script runs. You might try doing a minor upgrade--just a point release--simply to be sure that any upgrade is working fine.
At this point, you should either have no problems or a much more detailed problem.
Finally, please note that there is now a CiviCRM-specific StackExchange site, which is where you'll find the most CiviCRM experts to answer your questions.
When scanning an MSTag, the "Done" button displays "common_button_done" on the MSTag scan result view. This is occurring on iOS 6, but does not happen when running the app on iOS 5.1.1. We are using the MSTag SDK version with release date: 9/25/2012 (latest as of today).
I haven't been able to find anything regarding this issue. It seems that there maybe some localization file that can't be found or read for whatever reason, when running on iOS 6.
Has anyone else experienced this issue?
Make sure that the Library Search Paths are correct and that an old copy of the SDK is not hanging around from your version control system. In my case, an old copy was still being pulled down from CVS to a different location, and there were Library Search Path entries still there for the old copy--which was not referenced any longer by the project.
I removed the old copy from CVS, removed the old Library Search Path entries, nested the updated SDK in a different folder--to make sure the latest files were added to CVS, and added the correct Library Search Path entries.
For some reason, MSTagCoreResources.bundle was not being detected by CVS as having been updated--thus not getting check in, thus getting overwritten with the next "Get Latest"...thus not getting updated on all the developer machines.