This was an interview question.
I was given an array of n+1 integers from the range [1,n]. The property of the array is that it has k (k>=1) duplicates, and each duplicate can appear more than twice. The task was to find an element of the array that occurs more than once in the best possible time and space complexity.
After significant struggling, I proudly came up with O(nlogn) solution that takes O(1) space. My idea was to divide range [1,n-1] into two halves and determine which of two halves contains more elements from the input array (I was using Pigeonhole principle). The algorithm continues recursively until it reaches the interval [X,X] where X occurs twice and that is a duplicate.
The interviewer was satisfied, but then he told me that there exists O(n) solution with constant space. He generously offered few hints (something related to permutations?), but I had no idea how to come up with such solution. Assuming that he wasn't lying, can anyone offer guidelines? I have searched SO and found few (easier) variations of this problem, but not this specific one. Thank you.
EDIT: In order to make things even more complicated, interviewer mentioned that the input array should not be modified.
Take the very last element (x).
Save the element at position x (y).
If x == y you found a duplicate.
Overwrite position x with x.
Assign x = y and continue with step 2.
You are basically sorting the array, it is possible because you know where the element has to be inserted. O(1) extra space and O(n) time complexity. You just have to be careful with the indices, for simplicity I assumed first index is 1 here (not 0) so we don't have to do +1 or -1.
Edit: without modifying the input array
This algorithm is based on the idea that we have to find the entry point of the permutation cycle, then we also found a duplicate (again 1-based array for simplicity):
Example:
2 3 4 1 5 4 6 7 8
Entry: 8 7 6
Permutation cycle: 4 1 2 3
As we can see the duplicate (4) is the first number of the cycle.
Finding the permutation cycle
x = last element
x = element at position x
repeat step 2. n times (in total), this guarantees that we entered the cycle
Measuring the cycle length
a = last x from above, b = last x from above, counter c = 0
a = element at position a, b = elment at position b, b = element at position b, c++ (so we make 2 steps forward with b and 1 step forward in the cycle with a)
if a == b the cycle length is c, otherwise continue with step 2.
Finding the entry point to the cycle
x = last element
x = element at position x
repeat step 2. c times (in total)
y = last element
if x == y then x is a solution (x made one full cycle and y is just about to enter the cycle)
x = element at position x, y = element at position y
repeat steps 5. and 6. until a solution was found.
The 3 major steps are all O(n) and sequential therefore the overall complexity is also O(n) and the space complexity is O(1).
Example from above:
x takes the following values: 8 7 6 4 1 2 3 4 1 2
a takes the following values: 2 3 4 1 2
b takes the following values: 2 4 2 4 2
therefore c = 4 (yes there are 5 numbers but c is only increased when making steps, not initially)
x takes the following values: 8 7 6 4 | 1 2 3 4
y takes the following values: | 8 7 6 4
x == y == 4 in the end and this is a solution!
Example 2 as requested in the comments: 3 1 4 6 1 2 5
Entering cycle: 5 1 3 4 6 2 1 3
Measuring cycle length:
a: 3 4 6 2 1 3
b: 3 6 1 4 2 3
c = 5
Finding the entry point:
x: 5 1 3 4 6 | 2 1
y: | 5 1
x == y == 1 is a solution
Here is a possible implementation:
function checkDuplicate(arr) {
console.log(arr.join(", "));
let len = arr.length
,pos = 0
,done = 0
,cur = arr[0]
;
while (done < len) {
if (pos === cur) {
cur = arr[++pos];
} else {
pos = cur;
if (arr[pos] === cur) {
console.log(`> duplicate is ${cur}`);
return cur;
}
cur = arr[pos];
}
done++;
}
console.log("> no duplicate");
return -1;
}
for (t of [
[0, 1, 2, 3]
,[0, 1, 2, 1]
,[1, 0, 2, 3]
,[1, 1, 0, 2, 4]
]) checkDuplicate(t);
It is basically the solution proposed by #maraca (typed too slowly!) It has constant space requirements (for the local variables), but apart from that only uses the original array for its storage. It should be O(n) in the worst case, because as soon as a duplicate is found, the process terminates.
If you are allowed to non-destructively modify the input vector, then it is pretty easy. Suppose we can "flag" an element in the input by negating it (which is obviously reversible). In that case, we can proceed as follows:
Note: The following assume that the vector is indexed starting at 1. Since it is probably indexed starting at 0 (in most languages), you can implement "Flag item at index i" with "Negate the item at index i-1".
Set i to 0 and do the following loop:
Increment i until item i is unflagged.
Set j to i and do the following loop:
Set j to vector[j].
if the item at j is flagged, j is a duplicate. Terminate both loops.
Flag the item at j.
If j != i, continue the inner loop.
Traverse the vector setting each element to its absolute value (i.e. unflag everything to restore the vector).
It depends what tools are you(your app) can use. Currently a lot of frameworks/libraries exists. For exmaple in case of C++ standart you can use std::map<> ,as maraca mentioned.
Or if you have time you can made your own implementation of binary tree, but you need to keep in mind that insert of elements differs in comarison with usual array. In this case you can optimise search of duplicates as it possible in your particular case.
binary tree expl. ref:
https://www.wikiwand.com/en/Binary_tree
You are giving array of length N and numbers in the array contain 1 to N no repetition. You need to check if the array can be divided into to list of equal sum.
I know it can be solved using subset sum problem whose time complexity is.
Is there an algorithm so that I can reduce the time complexity?
As per your requirements, we conclude the array will always contain numbers 1 to N.
So if Array.Sum()==Even the answer is YES, otherwise NO.
Since the sum of elements from 1 to n equals n*(n+1)/2, you have to check if n*(n+1) is a multiple of 4, which is equivalent to checking if n is a multiple of 4, or if n+1 is a multiple of 4. The complexity of it is O(1).
If this condition is met, the two subsets are :
if n is a multiple of 4: sum up the odd numbers of first half with even numbers of second half on one hand, and even numbers of first half with odd of second half on the other.
For instance, 1 3 5 8 10 12 , and 2 4 6 7 9 11.
if n = 3 modulo 4 : almost the same thing, just split the first 3 between 1 and 2 on one hand, 3 on the other, you have a remaining serie which has a size multiple of 4.
For instance : 1 2 4 7 , and 3 5 6 ; or if you prefer, 3 4 7, and 1 2 5 6.
Given an array of N positive elements. Lets suppose we list all N × (N+1) / 2 non-empty continuous subarrays of the array A and then replaced all the subarrays with the maximum element present in the respective subarray. So now we have N × (N+1) / 2 elements where each element is maximum among its subarray.
Now we are having Q queries, where each query is one of 3 types :
1 K : We need to count of numbers strictly greater than K among those N × (N+1) / 2 elements.
2 K : We need to count of numbers strictly less than K among those N × (N+1) / 2 elements.
3 K : We need to count of numbers equal to K among those N × (N+1) / 2 elements.
Now main problem am facing is N can be upto 10^6. So i can't generate all those N × (N+1) / 2 elements. Please help to solve this porblem.
Example : Let N=3 and we have Q=2. Let array A be [1,2,3] then all sub arrays are :
[1] -> [1]
[2] -> [2]
[3] -> [3]
[1,2] -> [2]
[2,3] -> [3]
[1,2,3] -> [3]
So now we have [1,2,3,2,3,3]. As Q=2 so :
Query 1 : 3 3
It means we need to tell count of numbers equal to 3. So answer is 3 as there are 3 numbers equal to 3 in the generated array.
Query 2 : 1 4
It means we need to tell count of numbers greater than 4. So answer is 0 as no one is greater than 4 in generated array.
Now both N and Q can be up to 10^6. So how to solve this problem. Which data structure should be suitable to solve it.
I believe I have a solution in O(N + Q*log N) (More about time complexity). The trick is to do a lot of preparation with your array before even the first query arrives.
For each number, figure out where is the first number on left / right of this number that is strictly bigger.
Example: for array: 1, 8, 2, 3, 3, 5, 1 both 3's left block would be position of 8, right block would be the position of 5.
This can be determined in linear time. This is how: Keep a stack of previous maximums in a stack. If a new maximum appears, remove maximums from the stack until you get to a element bigger than or equal to the current one. Illustration:
In this example, in the stack is: [15, 13, 11, 10, 7, 3] (you will of course keep the indexes, not the values, I will just use value for better readability).
Now we read 8, 8 >= 3 so we remove 3 from stack and repeat. 8 >= 7, remove 7. 8 < 10, so we stop removing. We set 10 as 8's left block, and add 8 to the maximums stack.
Also, whenever you remove from the stack (3 and 7 in this example), set the right block of removed number to the current number. One problem though: right block would be set to the next number bigger or equal, not strictly bigger. You can fix this with simply checking and relinking right blocks.
Compute what number is how many times a maximum of some subsequence.
Since for each number you now know where is the next left / right bigger number, I trust you with finding appropriate math formula for this.
Then, store the results in a hashmap, key would be a value of a number, and value would be how many times is that number a maximum of some subsequence. For example, record [4->12] would mean that number 4 is the maximum in 12 subsequences.
Lastly, extract all key-value pairs from the hashmap into an array, and sort that array by the keys. Finally, create a prefix sum for the values of that sorted array.
Handle a request
For request "exactly k", just binary search in your array, for more/less thank``, binary search for key k and then use the prefix array.
This answer is an adaptation of this other answer I wrote earlier. The first part is exactly the same, but the others are specific for this question.
Here's an implemented a O(n log n + q log n) version using a simplified version of a segment tree.
Creating the segment tree: O(n)
In practice, what it does is to take an array, let's say:
A = [5,1,7,2,3,7,3,1]
And construct an array-backed tree that looks like this:
In the tree, the first number is the value and the second is the index where it appears in the array. Each node is the maximum of its two children. This tree is backed by an array (pretty much like a heap tree) where the children of the index i are in the indexes i*2+1 and i*2+2.
Then, for each element, it becomes easy to find the nearest greater elements (before and after each element).
To find the nearest greater element to the left, we go up in the tree searching for the first parent where the left node has value greater and the index lesser than the argument. The answer must be a child of this parent, then we go down in the tree looking for the rightmost node that satisfies the same condition.
Similarly, to find the nearest greater element to the right, we do the same, but looking for a right node with an index greater than the argument. And when going down, we look for the leftmost node that satisfies the condition.
Creating the cumulative frequency array: O(n log n)
From this structure, we can compute the frequency array, that tells how many times each element appears as maximum in the subarray list. We just have to count how many lesser elements are on the left and on the right of each element and multiply those values. For the example array ([1, 2, 3]), this would be:
[(1, 1), (2, 2), (3, 3)]
This means that 1 appears only once as maximum, 2 appears twice, etc.
But we need to answer range queries, so it's better to have a cumulative version of this array, that would look like:
[(1, 1), (2, 3), (3, 6)]
The (3, 6) means, for example, that there are 6 subarrays with maxima less than or equal to 3.
Answering q queries: O(q log n)
Then, to answer each query, you just have to make binary searches to find the value you want. For example. If you need to find the exact number of 3, you may want to do: query(F, 3) - query(F, 2). If you want to find those lesser than 3, you do: query(F, 2). If you want to find those greater than 3: query(F, float('inf')) - query(F, 3).
Implementation
I've implemented it in Python and it seems to work well.
import sys, random, bisect
from collections import defaultdict
from math import log, ceil
def make_tree(A):
n = 2**(int(ceil(log(len(A), 2))))
T = [(None, None)]*(2*n-1)
for i, x in enumerate(A):
T[n-1+i] = (x, i)
for i in reversed(xrange(n-1)):
T[i] = max(T[i*2+1], T[i*2+2])
return T
def print_tree(T):
print 'digraph {'
for i, x in enumerate(T):
print ' ' + str(i) + '[label="' + str(x) + '"]'
if i*2+2 < len(T):
print ' ' + str(i)+ '->'+ str(i*2+1)
print ' ' + str(i)+ '->'+ str(i*2+2)
print '}'
def find_generic(T, i, fallback, check, first, second):
j = len(T)/2+i
original = T[j]
j = (j-1)/2
#go up in the tree searching for a value that satisfies check
while j > 0 and not check(T[second(j)], original):
j = (j-1)/2
#go down in the tree searching for the left/rightmost node that satisfies check
while j*2+1<len(T):
if check(T[first(j)], original):
j = first(j)
elif check(T[second(j)], original):
j = second(j)
else:
return fallback
return j-len(T)/2
def find_left(T, i, fallback):
return find_generic(T, i, fallback,
lambda a, b: a[0]>b[0] and a[1]<b[1], #value greater, index before
lambda j: j*2+2, #rightmost first
lambda j: j*2+1 #leftmost second
)
def find_right(T, i, fallback):
return find_generic(T, i, fallback,
lambda a, b: a[0]>=b[0] and a[1]>b[1], #value greater or equal, index after
lambda j: j*2+1, #leftmost first
lambda j: j*2+2 #rightmost second
)
def make_frequency_array(A):
T = make_tree(A)
D = defaultdict(lambda: 0)
for i, x in enumerate(A):
left = find_left(T, i, -1)
right = find_right(T, i, len(A))
D[x] += (i-left) * (right-i)
F = sorted(D.items())
for i in range(1, len(F)):
F[i] = (F[i][0], F[i-1][1] + F[i][1])
return F
def query(F, n):
idx = bisect.bisect(F, (n,))
if idx>=len(F): return F[-1][1]
if F[idx][0]!=n: return 0
return F[idx][1]
F = make_frequency_array([1,2,3])
print query(F, 3)-query(F, 2) #3 3
print query(F, float('inf'))-query(F, 4) #1 4
print query(F, float('inf'))-query(F, 1) #1 1
print query(F, 2) #2 3
You problem can be divided into several steps:
For each element of initial array calculate the number of "subarrays" where current element is maximum. This will involve a bit of combinatorics. First you need for each element to know index of previous and next element that is bigger than current element. Then calculate the number of subarrays as (i - iprev) * (inext - i). Finding iprev and inext requires two traversals of the initial array: in forward and backward order. For iprev you need to traverse you array left to right. During the traversal maintain the BST that contains the biggest of the previous elements along with their index. For each element of original array, find the minimal element in BST that is bigger than current. It's index, stored as value, will be iprev. Then remove from BST all elements that are smaller that current. This operation should be O(logN), as you are removing whole subtrees. This step is required, as current element you are about to add will "override" all element that are less than it. Then add current element to BST with it's index as value. At each point of time, BST will store the descending subsequence of previous elements where each element is bigger than all it's predecessors in array (for previous elements {1,2,44,5,2,6,26,6} BST will store {44,26,6}). The backward traversal to find inext is similar.
After previous step you'll have pairs K→P where K is the value of some element from the initial array and P is the number of subarrays where this element is maxumum. Now you need to group this pairs by K. This means calculating sum of P values of the equal K elements. Be careful about the corner cases when two elements could have share the same subarrays.
As Ritesh suggested: Put all grouped K→P into an array, sort it by K and calculate cumulative sum of P for each element in one pass. It this case your queries will be binary searches in this sorted array. Each query will be performed in O(log(N)) time.
Create a sorted value-to-index map. For example,
[34,5,67,10,100] => {5:1, 10:3, 34:0, 67:2, 100:4}
Precalculate the queries in two passes over the value-to-index map:
Top to bottom - maintain an augmented tree of intervals. Each time an index is added,
split the appropriate interval and subtract the relevant segments from the total:
indexes intervals total sub-arrays with maximum greater than
4 (0,3) 67 => 15 - (4*5/2) = 5
2,4 (0,1)(3,3) 34 => 5 + (4*5/2) - 2*3/2 - 1 = 11
0,2,4 (1,1)(3,3) 10 => 11 + 2*3/2 - 1 = 13
3,0,2,4 (1,1) 5 => 13 + 1 = 14
Bottom to top - maintain an augmented tree of intervals. Each time an index is added,
adjust the appropriate interval and add the relevant segments to the total:
indexes intervals total sub-arrays with maximum less than
1 (1,1) 10 => 1*2/2 = 1
1,3 (1,1)(3,3) 34 => 1 + 1*2/2 = 2
0,1,3 (0,1)(3,3) 67 => 2 - 1 + 2*3/2 = 4
0,1,3,2 (0,3) 100 => 4 - 4 + 4*5/2 = 10
The third query can be pre-calculated along with the second:
indexes intervals total sub-arrays with maximum exactly
1 (1,1) 5 => 1
1,3 (3,3) 10 => 1
0,1,3 (0,1) 34 => 2
0,1,3,2 (0,3) 67 => 3 + 3 = 6
Insertion and deletion in augmented trees are of O(log n) time-complexity. Total precalculation time-complexity is O(n log n). Each query after that ought to be O(log n) time-complexity.