I am attempting to get up and running with Google Compute Engine and am following the getting started/hello world tutorial. After installing gcutil (running OSx) and Authenticating to Google Compute Engine the instruction is to pass the following command
$ gcutil getproject --project=<project-id> --cache_flag_values
However the following error message is returned
Error: The resource 'projects/<project-id>' was not found
Where project-id is the id of the project authenticated earlier. If I then try to execute any of the following commands in the tutorial (but including the project-id because cashing the value failed) e.g.
$ gcutil addfirewall http2 --project=<project-id> --description="Incoming http allowed." --allowed="tcp:http"
The same error gets returned.
I am working in the $HOME directory (the same directory that contains the gcutil-1.8.0 folder).
Could someone please tell me why I'm getting the projects not found error, and if possible how to overcome it?
Visit your project's "Compute Engine" page once, then run the command again:
$ gcutil getproject --project=<project-id> --cache_flag_values
for me. it works.
You must first enable billing in order to use Compute Engine.
https://console.developers.google.com/billing
Often you'll see this error when there is an authentication/authorization failure.
Make sure you ensure that the user account gcutil is authorized as matches a user account listed in the teams section of the (Cloud Console)[https://cloud.google.com/console]. You can find that under the gear icon in the upper right corner.
To confirm which account is being used by gcutil, run the following command:
$ gcutil auth --confirm_email --just_check_auth
INFO: Authorization succeeded for user xxx#xxx.com
If you find that you are authorized under the wrong account (multiple personas in chrome, for example) you can reauthorize gcutil with:
$ gcutil auth
Make sure that you follow this link in the right browser tab/context.
You can Used Two Steps:
Step 1: You will enable billing in order to use Compute Engine.
Step 2: And visit your project's Compute Engine page once, then run the command again.
it works Fine for me.
Related
I'm running the following command to deploy my Managed VMs app (on Windows 10):
gcloud preview app deploy app.yaml --project=<PROJECT> --promote
The deployment starts bug hangs on the following line:
Copying certificates for secure access. You may be prompted to create an SSH keypair.
And after some time I get the error:
ERROR: (gcloud.preview.app.deploy) Unable to copy certificates.
I've already:
Made sure that there are SSH keys in ~\.ssh\google_compute_engine
Tried to run with --quiet - same results
Renamed ssh-term.exe to ssh.exe - same results
Run the command as an administrator.
Run the command with --verbosity debug, which prints the following line multiple times: DEBUG: File [f] does not exist locally.
Any help will be much appreciated!
Found the cause! It was the project's firewall that blocked SSH by default. Fixed that and it worked.
Glad you fixed it, I had the same problem and will use your fix. I did happen accros a work around. By using the Container Build API to perform the build.
enter the command
gcloud config set app/use_cloud_build true
Before you
gcloud preview app deploy
Cite: https://github.com/isusanin/google-cloud-sdk/issues/533
Google App Engine SDK for PHP (at local environment) returns error on any try to use Google Cloud Storage. Error message is:
Fatal error: Uncaught exception 'google\appengine\runtime\RPCFailedError' with message 'Remote implementation for app_identity_service.GetAccessToken failed' in /media/data/home/vladimir/setup/gae/google_appengine/php/sdk/google/appengine/runtime/RemoteApiProxy.php on line 92
It exactly repeats the problem described here:
App engine update breaks CloudStorage in dev php env
Test code from the question above shows the same result.
I tried App Engine SDK for PHP versions 1.9.19, 1.9.20, 1.9.21 without success.
On Win10 this issue can be solved by generating an application-default credentials file:
D:\Workspace\Sourcecode>gcloud auth application-default login
Credentials saved to file: [C:\Users\Otje\AppData\Roaming\gcloud\application_default_credentials.json]
And then setting the environment in commandline:
D:\Workspace\Sourcecode>SET GOOGLE_APPLICATION_DEFAULT=C:\Users\Otje\AppData\Roaming\gcloud\application_default_credentials.json
Seems to me GAE on local just outputs limited error information when it can't find the right credentials to succesfully connect to remote endpoint.
It seems that it was GAE's server side issue. They fixed it. I discovered that it started to work as expected today without any changes applied by me.
I'm trying to run the Google App Engine Python 2.7 Hello World program and view it in a browser via Google App Engine Launcher. I followed the install and program instructions to the letter. I copied and pasted the code in the instructions to the helloworld.py file and app.yam1 and verified that they are correct and in the directory listed as the application directory. I hit run on the launcher and it runs with no errors, although I get no sign that is has completed (orange clock symbol next to app name). I get the following from the logs:
Running dev_appserver with the following flags: --skip_sdk_update_check=yes --port=8080 --admin_port=8000 Python command: /opt/local/bin/python2.7
When I try to open in the browser via the GAE Launcher, the 'browse' icon is grayed out and the browser won't open. I tried opening localhost:8080 in Firefox and Chrome as the tutorial suggests, but I get unable to connect errors from both.
How can I view Hello World in a browser? Is there some configuration I need to make on my machine?
I had the same problem. This seemed to fix it:
cd to google_appengine, run
python dev_appserver.py --port=8080 --host=127.0.0.1 /path/to/application
at this point there is a prompt to allow updates on running, I said Yes.
At this point the app was running as it should, also when I quit this and went in using the launcher again, that worked too.
I have to manually start python and make it point to my app folder, for instance in a command line window on Windows I am using python. I installed python in C:\Python27 and my sample app is in c:\GoogleApps\guestbook
C:\Python27>dev_appserver.py c:\GoogleApps\guestbook
and then I can start my app in the Google App Engine Launcher and hit localhost 8080
How about specifying --host argument? You can find it at the bottom of following doc.
https://developers.google.com/appengine/docs/python/tools/devserver
This might be a little late. But still someone might find it useful.
When ever you go and try changing the port number from 8080 to something else, it will not get updated. So the best option is:
Go to your user directory: eg: C:\Username
There will be a Google folder. Go inside
Open the file google_appengine_projects.ini
Change your port number from 8080 to whatever you like 8081
Save it and close the file.
Launch the GAE Launcher again and you will find the changes reflected and the app runs without issues.
7: Access the application using: http://localhost:NewPort/
This can be used to change ports both run port and admin port for your individual projects running locally.
Hope this helps!
The 8080 portion of your url is a port number. Firefox disables visiting url's of other ports by default. You have to enable them by doing the following: http://blog.christoffer.me/post/2012-02-20-how-to-remove-firefoxs-this-address-is-restricted/
Paraphrasing that website:
Open firefox and visit about:conf
In the Filter box, type in network.security.ports.banned.override
If you can't find such a preference, right click to open up the pop-up menu and pick New and then String
As preference name type network.security.ports.banned.override and 8080 as the value.
Done!
It's likely if this continues to not work that your browser is behaving properly (8080 is a fairly standard port). That means that its a problem with the server and we'd have to do some more debugging.
Trying to run my web2py app from the development server using GoogleAppEngineLauncher
Not sure if the on-line tutorials are out of date or I'm just missing something, but when I follow the link to download the GoogleAppEngine pythonSDK for OSX I get a dmg for the GoogleAppEngineLauncher.
I download and use that, which installs the proper executables, however after I setup my app.yaml file and run "dev_appserver.py myApp" I get this error:
fancy_urllib.InvalidCertificateException: Host appengine.google.com returned an invalid certificate (_ssl.c:503: error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed):
I don't get the error if I try and launch the app from the launcher itself, however I can't launch the app because it says the directory already exists and I don't have write permissions. I even tried chmod 777 on the myApp directory.
Should I not be using the GoogleAppLauncher?
additionally I tried using the linux SDX and received the same "certificate" error. The error message directs me to a link mentioning that I need the "ssl" module, but that is included in python 2.7.2 which I am using.
The link also mentions: "appcfg uses SSL when connecting to the Admin Console by default, unless the --insecure flag is passed." But I cannot find that flag in the help menu.
Found this answer which solves the problem.
Basically:
rm google_appengine/lib/cacerts/cacerts.txt
From the SDK
I have GWT app, which is deployed on GAE (Java). I'm trying to download data from App Engine datastore using appcfg.py . I did all the setup according to http://ikaisays.com/2010/06/10/using-the-bulkloader-with-java-app-engine/ .
GAE Python SDK version is 1.4.3
Python version is 2.5.4
appcfg.py is on my PATH. When I run appcfg.py on the command-line, I get the "help" message. But the problem is that no matter which command I use, it always returns the help message. I have not been able to run any command using appcfg.py.
It doesn't give any specific error message no matter what arguments I give. My app is using Google Accounts authentication, but I don't think it even gets to the point of authentication.
I'm able to use the Java appcfg (for other actions like rollback) without any problem. But the Python version simply refuses to work for all commands.
I've tried different formats like:
appcfg.py create_bulkloader_config --url=http://myappid.appspot.com/remote_api --application=myappid --filename=config.yml
appcfg.py create_bulkloader_config --filename=bulkloader.yaml --url=http://myappid.appspot.com/remote_api
appcfg.py --filename=bulkloader.yaml --url=http://myappid.appspot.com/remote_api create_bulkloader_config
All give me the same help message:
Usage: appcfg.py [options]
Action must be one of:
create_bulkloader_config: Create a bulkloader.yaml from a running application.
cron_info: Display information about cron jobs.
download_app: Download a previously-uploaded app.
download_data: Download entities from datastore.
help: Print help for a specific action.
request_logs: Write request logs in Apache common log format.
rollback: Rollback an in-progress update.
set_default_version: Set the default (serving) version.
update: Create or update an app version.
update_cron: Update application cron definitions.
update_dos: Update application dos definitions.
update_indexes: Update application indexes.
update_queues: Update application task queue definitions.
upload_data: Upload data records to datastore.
vacuum_indexes: Delete unused indexes from application.
Use 'help <action>' for a detailed description.
Options:
-h, --help Show the help message and exit.
-q, --quiet Print errors only.
-v, --verbose Print info level logs.
--noisy Print all logs.
-s SERVER, --server=SERVER
...
...
...
Even when I try "appcfg.py help create_bulkloader_config" for a detailed description, it still shows me the same standard help.
I have also tried on the local development server using the url http://127.0.0.1:8888/remote_api but it still gives the same help message.
I'm totally clueless as to what the problem is. I'm new to GWT and GAE, and any help will be appreciated.
Thanks.
The following fix worked for me. It looks like appcfg.py doesn't like PYTHON27 and ALWAYS returns the help menu. I fixed it by executing it with PYTHON25 and hard coded all my file locations:
C:\Python25-archive\python "C:\Program Files (x86)\Google\google_appengine\appcfg.py" rollback C:\scripts\myapp
The right way is to change the environment variables on Windows 7:
Go to System Properties
Go to Advance System Settings
Click on Environment Variables
Append to Path variable the values C:\Python27\
Click Ok and restart your computer. (Yes, it is needed.)
Another way is to:
Open command Prompt
Locate your python.exe file. For example:
C:\Python27>_
Then, run a python command that looks like this.
python <appcfg_directory> download_app -A <your_app_id> -V <your_app_version> <output-dir>
Where <appcfg_directory> is equal to C:\Program Files\Google\google_appengine\appcfg.py. (Depending on your file location)
Don't forget to put quotes before and after <appcfg_directory>