I have a SQL script that returns this derived table.
MM/YYYY Cat Score
02/2012 Test1 19
04/2012 Test1 15
05/2012 Test1 16
07/2012 Test1 14
08/2012 Test1 15
09/2012 Test1 15
12/2012 Test1 11
02/2012 Test2 15
03/2012 Test2 13
05/2012 Test2 18
06/2012 Test2 14
08/2012 Test2 15
09/2012 Test2 14
12/2012 Test2 10
As you can see, I am missing some MM/YYYYs (03/2012, 06/2012, 11/2012, etc).
I would like to fill in the missing MM/YYYYs with the Cat & a 0 (zero) form the score. I know what the beginning date (1/2012) should be.
I have tried to join a table that contains the all MM/YYYY for the ranges the query will be run, but this only returns the missing rows for the first occurrence, it does not repeat for each Cat (should have known that).
So my question is this, can I do this using a join or will I have to do this in a temp table, and then output the data. I am looking to return a table, that has 24 rows, for the date range 1/2012 to 12/2012, with the appropriate Cat (Test1 & Test2) & the corresponding score, if it exists or a zero if it was not in the origial table.
AHIGA, LarryR…
Here's an example of how you can use some CTEs to get what you are after. This uses three CTEs: One for all the dates, one for your categories, then a third to cross join them. The third is really redundant but it's just to make it a little more obvious what we are looking at.
DECLARE
#StartDate datetime = '2/1/2012'
,#EndDate datetime = '4/26/2013'
;WITH DATES AS
(
SELECT
CAST(MONTH(#StartDate) as varchar(20)) + '/' + CAST(YEAR(#StartDate) as varchar(20)) 'CurrMonth'
,#StartDate as Datefield
UNION ALL
SELECT
CAST(MONTH(CurrDate) as varchar(20)) + '/' + CAST(YEAR(CurrDate) as varchar(20))
,CurrDate
FROM
DATES
CROSS APPLY (SELECT DATEADD(month, 1, Datefield)) CxA(CurrDate)
WHERE CurrDate < #EndDate
)
,CATS AS
(
SELECT 'Test1' as 'Cat'
UNION ALL
SELECT 'Test2'
)
,AllTheThings AS
(
SELECT
Datefield
,CurrMonth
,Cat
FROM
DATES D
CROSS JOIN
CATS C
)
SELECT * FROM AllTheThings
If I understodd correctly, you would join your table like this
SELECT
d.Date,c.Cat,ISNULL(t.Score,0) As Score
FROM YourDateTable d
CROSS JOIN
( -- Your Cat Table or UNION Cat here
SELECT 'Test1' AS Cat
UNION ALL
SELECT 'Test2'
) c
LEFT JOIN YourCurrentTable t
ON t.Date = d.Date
AND t.Cat = c.Cat
The best solution is to create a date table (over a temp table). It takes very little space.
Related
I am new to SQL. I looked for all over the internet for a solution that matches the problem I have but I couldn't find any. I have a table named 'tblItemReviewItems' in an SQL server 2012.
tblItemReviewItems
Information:
1. ItemReviewId column is the PK.
2. Deleted column will have only "Yes" and "No" value.
3. Audited column will have only "Yes" and "No" value.
I want to create a stored procedure to do the followings:
Pick a random sample of 10% of all ItemReviewId for distinct 'UserId' and distinct 'ReviewDate' in a given date range. 10% sample should include- 5% of the total population from Deleted (No) and 5% of the total population from Deleted (Yes). Audited ="Yes" will be excluded from the sample.
For example – A user has 118 records. Out of the 118 records, 17 records have Deleted column value "No" and 101 records have Deleted column value "Yes". We need to pick a random sample of 12 records. Out of those 12 records, 6 should have Deleted column value "No" and 6 should have Deleted column value "Yes".
Update Audited column value to "Check" for the picked sample.
How can I achieve this?
This is the stored procedure I used to pick a sample of 5% of Deleted column value "No" and 5% of Deleted column value "Yes". Now the situation is different.
ALTER PROC [dbo].[spItemReviewQcPickSample]
(
#StartDate Datetime
,#EndDate Datetime
)
AS
BEGIN
WITH CTE
AS (SELECT ItemReviewId
,100.0
*row_number() OVER(PARTITION BY UserId
,ReviewDate
,Deleted
order by newid()
)
/count(*) OVER(PARTITION BY UserId
,Reviewdate
,Deleted
)
AS pct
FROM tblItemReviewItems
WHERE ReviewDate BETWEEN #StartDate AND #EndDate
AND Deleted in ('Yes','No')
AND Audited='No'
)
SELECT a.*
FROM tblItemReviewItems AS a
INNER JOIN cte AS b
ON b.ItemReviewId=a.ItemReviewId
AND b.pct<=6
;
WITH CTE
AS (SELECT ItemReviewId
,100.00
*row_number() OVER(PARTITION BY UserId
,ReviewDate
,Deleted
ORDER BY newid()
)
/COUNT(*) OVER(PARTITION BY UserId
,Reviewdate
,Deleted
)
AS pct
FROM tblItemReviewItems
WHERE ReviewDate BETWEEN #StartDate AND #EndDate
AND deleted IN ('Yes','No')
AND audited='No'
)
UPDATE a
SET Audited='Check'
FROM tblItemReviewItems AS a
INNER JOIN cte AS b
ON b.ItemReviewId=a.ItemReviewId
AND b.pct<=6
;
END
Any help would be highly appreciated. Thanks in advance.
This may assist you in getting started. My idea is, you create the temp tables you need, and load the specific data into the (deleted, not deleted etc.). You then run something along the lines of:
IF OBJECT_ID('tempdb..#tmpTest') IS NOT NULL DROP TABLE #tmpTest
GO
CREATE TABLE #tmpTest
(
ID INT ,
Random_Order INT
)
INSERT INTO #tmpTest
(
ID
)
SELECT 1 UNION ALL
SELECT 2 UNION ALL
SELECT 3 UNION ALL
SELECT 4 UNION ALL
SELECT 5 UNION ALL
SELECT 6 UNION ALL
SELECT 7 UNION ALL
SELECT 8 UNION ALL
SELECT 9 UNION ALL
SELECT 10 UNION ALL
SELECT 11 UNION ALL
SELECT 12 UNION ALL
SELECT 13 UNION ALL
SELECT 14 UNION ALL
SELECT 15 UNION ALL
SELECT 16;
DECLARE #intMinID INT ,
#intMaxID INT;
SELECT #intMinID = MIN(ID)
FROM #tmpTest;
SELECT #intMaxID = MAX(ID)
FROM #tmpTest;
WHILE #intMinID <= #intMaxID
BEGIN
UPDATE #tmpTest
SET Random_Order = 10 + CONVERT(INT, (30-10+1)*RAND())
WHERE ID = #intMinID;
SELECT #intMinID = #intMinID + 1;
END
SELECT TOP 5 *
FROM #tmpTest
ORDER BY Random_Order;
This assigns a random number to a column, that you then use in conjunction with a TOP 5 clause, to get a random top 5 selection.
Appreciate a loop may not be efficient, but you may be able to update to a random number without it, and the same principle could be implemented. Hope that gives you some ideas.
I do have following table
ID Name
1 Jagan Mohan Reddy868
2 Jagan Mohan Reddy869
3 Jagan Mohan Reddy
Name column size is VARCHAR(55).
Now for some other task we need to take only 10 varchar length i.e. VARCHAR(10).
My requirement is to check that after taking the only 10 bits length of Name column value for eg if i take Name value of ID 1 i.e. Jagan Mohan Reddy868 by SUBSTRING(Name, 0,11) if it equals with another row value. here in this case the final value of SUBSTRING(Jagan Mohan Reddy868, 0,11) is equal to Name value of ID 3 row whose Name is 'Jagan Mohan Reddy'. I need to make a list of those kind rows. Can somebody help me out on how can i achieve in SQL Server.
My main check is that the truncated values of my Name column should not match with any non truncated values of Name column. If so i need to get those records.
Assuming I understand the question, I think you are looking for something like this:
Create and populate sample data (Please save us this step in your future questions)
DECLARE #T as TABLE
(
Id int identity(1,1),
Name varchar(15)
)
INSERT INTO #T VALUES
('Hi, I am Zohar.'),
('Hi, I am Peled.'),
('Hi, I am Z'),
('I''m Zohar peled')
Use a cte with a self inner join to get the list of ids that match the first 10 chars:
;WITH cte as
(
SELECT T2.Id As Id1, T1.Id As Id2
FROM #T T1
INNER JOIN #T T2 ON LEFT(T1.Name, 10) = t2.Name AND T1.Id <> T2.Id
)
Select the records from the original table, inner joined with a union of the Id1 and Id2 from the cte:
SELECT T.Id, Name
FROM #T T
INNER JOIN
(
SELECT Id1 As Id
FROM CTE
UNION
SELECT Id2
FROM CTE
) U ON T.Id = U.Id
Results:
Id Name
----------- ---------------
1 Hi, I am Zohar.
3 Hi, I am Z
Try this
SELECT Id,Name
FROM(
SELECT *,ROW_NUMBER() OVER(PARTITION BY Name, LEFT(Name,11) ORDER BY ID) RN
FROM Tbale1 T
) Tmp
WHERE Tmp.RN = 1
loop over your column for all the values and put your substring() function inside this loop and I think in Sql index of string starts from 1 instead of 0. If you pass your string to charindex() like this
CHARINDEX('Y', 'Your String')
thus you will come to know whether it is starting from 0 or 1
and you can save your substring value as value of other column with length 10
I hope it will help you..
I think this should cover all the cases you are looking for.
-- Create Table
DECLARE #T as TABLE
(
Id int identity(1,1),
Name varchar(55)
)
-- Create Data
INSERT INTO #T VALUES
('Jagan Mohan Reddy868'),
('Jagan Mohan Reddy869'),
('Jagan Mohan Reddy'),
('Mohan Reddy'),
('Mohan Reddy123551'),
('Mohan R')
-- Get Matching Items
select *, SUBSTRING(name, 0, 11) as ShorterName
from #T
where SUBSTRING(name, 0, 11) in
(
-- get all shortnames with a count > 1
select SUBSTRING(name, 0, 11) as ShortName
from #T
group by SUBSTRING(name, 0, 11)
having COUNT(*) > 1
)
order by Name, LEN(Name)
I am a newbie poster but have spent a lot of time researching answers here. I can't quite figure out how to create a SQL result set using SQL Server 2008 R2 that should probably be using lead/lag from more modern versions. I am trying to aggregate data based on sequencing of one column, but there can be varying numbers of instances in each sequence. The only way I know a sequence has ended is when the next row has a lower sequence number. So it may go 1-2, 1-2-3-4, 1-2-3, and I have to figure out how to make 3 aggregates out of that.
Source data is joined tables that look like this (please help me format):
recordID instanceDate moduleID iResult interactionNum
1356 10/6/15 16:14 1 68 1
1357 10/7/15 16:22 1 100 2
1434 10/9/15 16:58 1 52 1
1435 10/11/15 17:00 1 60 2
1436 10/15/15 16:57 1 100 3
1437 10/15/15 16:59 1 100 4
I need to find a way to separate the first 2 rows from the last 4 rows in this example, based on values in the last column.
What I would love to ultimately get is a result set that looks like this, which averages the iResult column based on the grouping and takes the first instanceDate from the grouping:
instanceDate moduleID iResult
10/6/15 1 84
10/9/15 1 78
I can aggregate to get this result using MIN and AVG if I can just find a way to separate the groups. The data is ordered by instanceDate (please ignore the date formatting here) then interactionNum and the group separation should happen when the query finds a row where the interactionNum is <= than the previous row (will usually start over with '1' but not always, so prefer just to separate on a lower or equal integer value).
Here is the query I have so far (includes the joins that give the above data set):
SELECT
X.*
FROM
(SELECT TOP 100 PERCENT
instanceDate, b.ModuleID, iResult, b.interactionNum
FROM
(firstTable a
INNER JOIN
secondTable b ON b.someID = a.someID)
WHERE
a.someID = 2
AND b.otherID LIKE 'xyz'
AND a.ModuleID = 1
ORDER BY
instanceDate) AS X
OUTER APPLY
(SELECT TOP 1
*
FROM
(SELECT
instanceDate, d.ModuleID, iResult, d.interactionNum
FROM
(firstTable c
INNER JOIN
secondTable d ON d.someID = c.someID)
WHERE
c.someID = 2
AND d.otherID LIKE 'xyz'
AND c.ModuleID = 1
AND d.interactionNum = X.interactionNum
AND c.instanceDate < X.instanceDate) X2
ORDER BY
instanceDate DESC) Y
WHERE
NOT EXISTS (SELECT Y.interactionNum INTERSECT SELECT X.interactionNum)
But this is returning an interim result set like this:
instanceDate ModuleID iResult interactionNum
10/6/15 16:10 1 68 1
10/6/15 16:14 1 100 2
10/15/15 16:57 1 100 3
10/15/15 16:59 1 100 4
and the problem is that interactionNum 3, 4 do not belong in this result set. They would go in the next result set when I loop over this query. How do I keep them out of the result set in this iteration? I need the result set from this query to just include the first two rows, 'seeing' that row 3 of the source data has a lower value for interactionNum than row 2 has.
Not sure what ModuleID was supposed to be used, but I guess you're looking for something like this:
select min (instanceDate), [moduleID], avg([iResult])
from (
select *,row_number() over (partition by [moduleID] order by instanceDate) as RN
from Table1
) X
group by [moduleID], RN - [interactionNum]
The idea here is to create a running number with row_number for each moduleid, and then use the difference between that and InteractionNum as grouping criteria.
Example in SQL Fiddle
Here is my solution, although it should be said, I think #JamesZ answer is cleaner.
I created a new field called newinstance which is 1 wherever your instanceNumber is 1. I then created a rolling sum(newinstance) called rollinginstance to group on.
Change the last select to SELECT * FROM cte2 to show all the fields I added.
IF OBJECT_ID('tempdb..#tmpData') IS NOT NULL
DROP TABLE #tmpData
CREATE TABLE #tmpData (recordID INT, instanceDate DATETIME, moduleID INT, iResult INT, interactionNum INT)
INSERT INTO #tmpData
SELECT 1356,'10/6/15 16:14',1,68,1 UNION
SELECT 1357,'10/7/15 16:22',1,100,2 UNION
SELECT 1434,'10/9/15 16:58',1,52,1 UNION
SELECT 1435,'10/11/15 17:00',1,60,2 UNION
SELECT 1436,'10/15/15 16:57',1,100,3 UNION
SELECT 1437,'10/15/15 16:59',1,100,4
;WITH cte1 AS
(
SELECT *,
CASE WHEN interactionNum=1 THEN 1 ELSE 0 END AS newinstance,
ROW_NUMBER() OVER(ORDER BY recordID) as rowid
FROM #tmpData
), cte2 AS
(
SELECT *,
(select SUM(newinstance) from cte1 b where b.rowid<=a.rowid) as rollinginstance
FROM cte1 a
)
SELECT MIN(instanceDate) AS instanceDate, moduleID, AVG(iResult) AS iResult
FROM cte2
GROUP BY moduleID, rollinginstance
I have the following table:
maker model type
B 1121 pc
A 1233 pc
E 1260 pc
A 1752 laptop
A 1276 printer
D 1288 printer
I need to receive a result in the form: maker, pc. If a particular maker has models in a given type, I need to concatenate the word 'yes' with the number of models in parentheses. Ex. yes(1) for maker 'A'. So, how can I avoid the following duplication?
CASE
WHEN SELECT COUNT(*) WHERE ... > 0
THEN 'yes(' + CAST((SELECT COUNT(*) WHERE ...) AS varchar) + ')'
This is not a real world problem. I just need to understand how to save a subquery result to use it in a branch statement. The result of this branch statement may contain the subquery result itself.
Creating tables:
create table #t (maker varchar(100), model varchar(100), type varchar(100) );
insert into #t ( maker, model, type ) values
( 'B', '1121', 'pc'),
( 'A', '1233', 'pc'),
( 'E', '1260', 'pc');
Query in easy steps:
;with
totals as (
select maker, type,
count( * ) as n
from
#t
group by
maker, type
) ,
maker_type as (
select distinct maker, type
from #t
)
select
mm.*, t.n,
case when t.n is null then 'No' else 'Yes' end as yes_no
from
maker_type mm
left outer join
totals t
on mm.maker = t.maker and
mm.type = t.type
Results:
maker type n yes_no
----- ---- - ------
A pc 1 Yes
B pc 1 Yes
E pc 1 Yes
I don't extend solution concatenating strings because I see that you know how to do it. Be free to change first or second CTE query to match yours requirements.
I'm trying to extract some data from a third party system which uses an SQL Server database. The DB structure looks something like this:
Order
OrderID OrderNumber
1 OX101
2 OX102
OrderItem
OrderItemID OrderID OptionCodes
1 1 12,14,15
2 1 14
3 2 15
Option
OptionID Description
12 Batteries
14 Gift wrap
15 Case
[etc.]
What I want is one row per order item that includes a concatenated field with each option description. So something like this:
OrderItemID OrderNumber Options
1 OX101 Batteries\nGift Wrap\nCase
2 OX101 Gift Wrap
3 OX102 Case
Of course this is complicated by the fact that the options are a comma separated string field instead of a proper lookup table. So I need to split this up by comma in order to join in the options table, and then concat the result back into one field.
At first I tried creating a function which splits out the option data by comma and returns this as a table. Although I was able to join the result of this function with the options table, I wasn't able to pass the OptionCodes column to the function in the join, as it only seemed to work with declared variables or hard-coded values.
Can someone point me in the right direction?
I would use a splitting function (here's an example) to get individual values and keep them in a CTE. Then you can join the CTE to your table called "Option".
SELECT * INTO #Order
FROM (
SELECT 1 OrderID, 'OX101' OrderNumber UNION SELECT 2, 'OX102'
) X;
SELECT * INTO #OrderItem
FROM (
SELECT 1 OrderItemID, 1 OrderID, '12,14,15' OptionCodes
UNION
SELECT 2, 1, '14'
UNION
SELECT 3, 2, '15'
) X;
SELECT * INTO #Option
FROM (
SELECT 12 OptionID, 'Batteries' Description
UNION
SELECT 14, 'Gift Wrap'
UNION
SELECT 15, 'Case'
) X;
WITH N AS (
SELECT I.OrderID, I.OrderItemID, X.items OptionCode
FROM #OrderItem I CROSS APPLY dbo.Split(OptionCodes, ',') X
)
SELECT Q.OrderItemID, Q.OrderNumber,
CONVERT(NVarChar(1000), (
SELECT T.Description + ','
FROM N INNER JOIN #Option T ON N.OptionCode = T.OptionID
WHERE N.OrderItemID = Q.OrderItemID
FOR XML PATH(''))
) Options
FROM (
SELECT N.OrderItemID, O.OrderNumber
FROM #Order O INNER JOIN N ON O.OrderID = N.OrderID
GROUP BY N.OrderItemID, O.OrderNumber) Q
DROP TABLE #Order;
DROP TABLE #OrderItem;
DROP TABLE #Option;