Access Denied...? - batch-file

#echo off
color 4
ping localhost 2.5 > nul
echo Welcome to the configuration menu.
echo Move AH1.exe and AH2.exe to your desktop.
echo This only works the first time
echo SO BE CAREFUL!
echo Would you like this to start on computer startup?
echo say "yes" or "no" below.
set /p option=Option:
IF %ERRORLEVEL% EQU no goto no
IF %ERRORLEVEL% EQU yes goto yes
:yes
echo Move AH1.bat and AH2.bat to desktop.
::Copies files to dekstop of current user *For Windows 7
xcopy "%systemdrive%\users\%username%\Desktop\AH1.bat" "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup"
xcopy "%systemdrive%\users\%username%\Desktop\AH2.bat" "C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup"
echo Moved.
echo Press any key to close Anti Hacker Configuration.
pause > nul
exit
:no
echo No?The program will not take full effect then.
pause
exit
If you want to test,make 2 batch files on your desktop called AH1 and AH2
It says Access Denied....why??

No matter what you put into the option variable, it will always go to :yes.
I'm guessing you got mixed up with the choice command when you were making this because errorlevel doesn't contain the option you choose when you have the set command.
From the set documentation:
%ERRORLEVEL% - expands to the current ERRORLEVEL value
So, you might want to change if %errorlevel% equ no goto no to if %option% equ no goto no.
Also, what happens if you don't put either yes nor no. You need to account for these things by perhaps having a exit command after the second if statement.

Related

Skipping to next step in Batch program

#echo off
setlocal EnableDelayedExpansion
color b
goto play
:play
cls
set name2= OoggieBoogie
echo Hello, My name is !name2!^^! I'm an AI. I'm here to help with your lazy
Butt :D^^!
timeout /t 3 >null
echo!name2!: May I Have Your Have Your Name Please? :)
color c
echo (Pssst^^! Want to cut the Bullshit and go straight in? Select "Express" please!)
timeout /t 2 >null
echo A. My name is
echo B. Express
set /p input=
if !input! equ B goto Writing2
cls
echo!name2!: Hello !name!, Shall we continue now?
echo 1.Yes :D
echo 2.No -_-" ..
set /p input=!name!:
if !input! equ 1 goto Writing
if !input! equ Yes goto Writing
if !input! equ 2 exit
if !input! equ No exit
:Writing2
echo Okay.. Whatever you want Damn.. I was trying to be nice ^^!
echo Anyway. Inatiating EXPRESS Route----->
goto Writing
Hello!
What I am trying to do here is skipping all the steps and go straight to "Writting2" if typed Express.
I am almost done with this fun program but I can't figure out a good way skip all the steps.
When I type "Express or select 'B'
it crashes.
but If I write a name the program works as usual!
Thanks in Advance!
Sorry in Advance if I did something wrong in the community.
This is a way you can do what you want:
#echo off
color b
goto play
:play
cls
set name2= OoggieBoogie
echo Hello, My name is %name2% I'm an AI. I'm here to help with your lazy
::echo Butt :D^^!
timeout /t 3 >nul
echo %name2%: May I Have Your Have Your Name Please? :)
color c
echo (Pssst^^! Want to cut the Bullshit and go straight in? Select "Express" please!)
timeout /t 2 >nul
echo A. My name is
echo B. Express
choice /c:AB>NUL
if errorlevel 2 goto Writing2
set /p "name=Enter your name: "
:Writing
cls
echo %name2%: Hello %name%, Shall we continue now?
echo 1.Yes :D
echo 2.No -_-" ..
choice /c:1Y2N>NUL
if errorlevel 4 goto exit
if errorlevel 3 goto exit
if errorlevel 2 goto Writing
if errorlevel 1 goto Writing
:Writing2
echo Okay.. Whatever you want Damn.. I was trying to be nice ^^!
echo Anyway. Inatiating EXPRESS Route-----^>
goto Writing
:exit
exit /b
Remember: Variables can be accessed by %variable_name% and you can set them by set "variable_name=variable_value" as #Compo mentioned above.
It is better to use choice /c option in your future batchfiles. A disadvantage of this option is that you cannot enter a string with more than 1 character, but it does it's own errorhandling, so you don't have to deal with invalid responses. Also, when you write
echo Anyway. Initiating EXPRESS Route----->
> symbol causes problems as it is a redirection character and should be escaped:
echo Anyway. Initiating EXPRESS Route-----^>

Is it possible to create an interactive notepad within batch script that saves users input

I'm in the process of creating a mini-game using batch and one of the useful tool ideas was to have an interactive notepad so that users could store information throughout the game and refer back to it later. So far I have created the option to goto a notepad within an In-game pause menu but wasn't sure if it was possible to save results without outputting to new file on the desktop
:PauseMenu
cls
echo.
echo %Alias%
echo.
echo Notepad
echo Stats
echo Untitled2
echo Untitled3
echo Untitled4
echo Untitled5
echo Untitled6
set/p PauseMenu="N, S"
IF ["%PauseMenu%"]==["N"] goto Notepad
IF ["%PauseMenu%"]==["S"] goto Stats
IF ["%PauseMenu%"]==["N"] goto
IF ["%PauseMenu%"]==["N"] goto
IF ["%PauseMenu%"]==["N"] goto
IF ["%PauseMenu%"]==["N"] goto
IF ["%PauseMenu%"]==["N"] goto
Any help would be appreciated, thanks.
PS is it possible to go back to the previous page from a menu?
Simplicity itself.
First, some renaming may be in order. notepad is a supplied utility and pausemenu is being used both as a variable and as a label. This is not invalid, but can be a little confusing.
Further, if you are choosing between a set of keys, I'd suggest you investigate choice. choice has a number of advantages, like it only accepts one character, no enter is required and it's not necessary to analyse the entry.
So: revising your code:
:p_pausemenu
pause
:PauseMenu
cls
echo.
echo %Alias%
echo.
echo N Notepad
echo S Stats
echo 1 Untitled2
echo Z Untitled3
echo Q Untitled4
echo J Untitled5
echo X Untitled6
:: Note that the processing of ERRORLEVEL must be in reverse order
choice /c ns1zqjx
if errorlevel 7 goto labelx
if errorlevel 6 goto labelj
if errorlevel 5 goto labelq
if errorlevel 4 goto labelz
if errorlevel 3 goto label1
if errorlevel 2 goto stats
if errorlevel 1 goto unotepad
:unotepad
start "Notes for %alias%" notepad "c:\gamedirectory\%alias%.txt"
goto pausemenu
:stats
:: List your stats here
echo Stats for %alias%
goto p_pausemenu
Here, a menu with a number of unimplemented options is presented and the choice command (see choice /? from the prompt for more options) waits for a choice to be made.
errorlevel is set according to the choice made - but since if errorlevel n means if errorlevel is n OR GREATER THAN n you need to process errorlevel in reverse order.
Then each selection is processed. n will start a notepad instance and load the alias.txt file from the game directory, then present the menu again as it returns to pausemenu. s will show the stats (idk what you need for that) and then return to p_pausemenu which will pause and then proceed to show the menu when the user signals to do so.

Redirecting CMD Commands To An EXE File

Basically I have created an choice batch that every so often I can archive the contents of my boot data since I change it quite often and it works absolutely perfect, however I face the problem that every time I compile the batch from .BAT to.EXE with Advanced BAT to EXE converter the command 'bcdedit' never works and says “Not recognised as an internal or external command, operable program or batch file.”
Now the first thing I did was to make sure if I had the environment variables directed on my hard drive and it seemed fine:
Path: %SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Users\Support\DOCUME~1\MYFILE~1\Programs\SYSTEM~1\DISKEE~1\
It has all the variables needed to work perfectly plus a few external ones which is ok then I thought that maybe I should try to make it direct on my folder, by doing some research I found on another forum:
Setting or Modifying a System Wide Environment Variable In CMD.EXE
I made a separate .BAT and I called it and it seems it did create the separate variable:
C:\Users\???\Documents\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Users\Support\DOCUME~1\MYFILE~1\Programs\SYSTEM~1\DISKEE~1" /f
But It Still Didn't Work!
I read upon another form:
Syswow64 Redirection
The person solution was to use Create Process () to create a program that automatically redirects him to the folder using sysnative (System32) but I'm a total beginner at C#, CMD is my strongest area when it comes to coding.
Please please I beg of you to help me as soon as possible and if you do have an answer please state in the easiest way possible and why. Here's my script just in case:
:START
echo.
echo Call apath.bat
echo.
echo.
echo (E) - Start Process.
echo (C) - Launch Part 2 Of Process.
echo (N) - Load NoDrives Manager.
echo (D) - Display Currect Account and Computer Information
echo (X) - Exit EDIM.
echo.
echo NOTE - It will not work if not started with Admin Privillages.
echo.
:Choice
set/p Option=Please enter your option:
if '%Option%' == 'E' goto :Incognito
if '%Option%' == 'C' goto :Touch
if '%Option%' == 'N' goto :Manager
if '%Option%' == 'D' goto :Data
if '%Option%' == 'X' goto :Exit
echo.
echo.
echo Invalid Option - Please Reselect.
goto :Choice
:RetryE
Echo An Error was found!
set/p RetryE=Retry? Y/N:
if '%RetryE%' == 'Y' goto :Incognito
if '%RetryE%' == 'N' goto :Exit
:Incognito
Timeout 5
echo.
echo.
echo.
Echo Saving OriginalBCD...
bcdedit /export "Data/BCD/OriginalBCD"
IF %ERRORLEVEL% GTR 0 goto :RetryE
IF %ERRORLEVEL% LSS 0 goto :RetryE
Echo Checking presence of BCD...
IF NOT EXIST "Data/BCD/OriginalBCD" goto :RetryE
Echo Deleting Boot Entry...
bcdedit /delete {current}
IF %ERRORLEVEL% GTR 0 goto :RetryE
IF %ERRORLEVEL% LSS 0 goto :RetryE
Echo Saving EditedBCD...
bcdedit /export "Data/BCD/IncogBCD"
IF %ERRORLEVEL% GTR 0 goto :RetryE
IF %ERRORLEVEL% LSS 0 goto :RetryE
Echo Checking presence of BCD...
IF NOT EXIST "Data/BCD/IncogBCD" goto :RetryE
Echo Allowing User Control For Assigning System Reserved Partitions...
Echo -Commands-
Echo Diskpart
Echo List volume
Echo Select Volume "" (The one that has no Letter and remember number)
Echo Assign Letter=Z
Echo Select Volume "" (The one that has Letter E and remember number)
Echo Remove Letter=E (This is the new system reserved partition)
Echo Then exit Diskpart to finish Part 1.
Diskpart
Echo Ready To Restart!
Timeout 5
Shutdown /r /t 30
Goto :Start
:RetryC
set/p RetryE=Retry? Y/N:
if '%RetryC%' == 'Y' goto :Touch
if '%RetryC%' == 'N' goto :Exit
:Touch
echo.
echo.
echo.
Echo Loading NDM...
Echo NOTE - Store the password somewhere safe!!!
Start "" "Data/NDM.exe"
Echo Loading EditedBCD...
bcdedit /import "Data/BCD/IncogBCD"
IF %ERRORLEVEL% GTR 0 goto :RetryC
IF %ERRORLEVEL% LSS 0 goto :RetryC
Echo Process Complete!
Timeout 5
Echo Returning to menu...
goto :Start
:Manager
echo.
Echo NOTE - Store the password somewhere safe!!!
Start "" /WAIT "Data/ndm.exe"
Echo Returning to Menu...
goto :Start
:Data
echo.
echo.
echo.
echo Processing Data...
Systeminfo
diskpart /s "Data/discpart.txt"
Echo Returning to Menu...
goto :Start
:Exit
Exit
Thanks So Much!
bcdedit is on the path by default so unless you are reusing the PATH variable then the problem is in the batch compiler.
You can test this by using the plain batch file - and if it works then you know where the problem is.

Multiple choices menu on batch file?

Hi I want to make a batch file menu, that asks 'Select app you want to install?' for example
App1
App2
App3
App4
App5
ALL Apps
Select what app:_
What I want is, for example I want to install App2, App3, and App5, so I can type on by App ID's 'Select what app:2,3,5' . And when user Select option 6, it will install all Applications!
I know this is possible on bash scripting, but Im not sure on batch scripting?
An example of batch menu is http://mintywhite.com/software-reviews/productivity-software/create-multiple-choice-menu-batchfile/
Answer
This will do what you want. Let me know if you have any questions. All you have to do is follow the two steps listed in the script.
Script
:: Hide Command and Set Scope
#echo off
setlocal EnableExtensions
:: Customize Window
title My Menu
:: Menu Options
:: Specify as many as you want, but they must be sequential from 1 with no gaps
:: Step 1. List the Application Names
set "App[1]=One"
set "App[2]=Two"
set "App[3]=Three"
set "App[4]=Four"
set "App[5]=Five"
set "App[6]=All Apps"
:: Display the Menu
set "Message="
:Menu
cls
echo.%Message%
echo.
echo. Menu Title
echo.
set "x=0"
:MenuLoop
set /a "x+=1"
if defined App[%x%] (
call echo %x%. %%App[%x%]%%
goto MenuLoop
)
echo.
:: Prompt User for Choice
:Prompt
set "Input="
set /p "Input=Select what app:"
:: Validate Input [Remove Special Characters]
if not defined Input goto Prompt
set "Input=%Input:"=%"
set "Input=%Input:^=%"
set "Input=%Input:<=%"
set "Input=%Input:>=%"
set "Input=%Input:&=%"
set "Input=%Input:|=%"
set "Input=%Input:(=%"
set "Input=%Input:)=%"
:: Equals are not allowed in variable names
set "Input=%Input:^==%"
call :Validate %Input%
:: Process Input
call :Process %Input%
goto End
:Validate
set "Next=%2"
if not defined App[%1] (
set "Message=Invalid Input: %1"
goto Menu
)
if defined Next shift & goto Validate
goto :eof
:Process
set "Next=%2"
call set "App=%%App[%1]%%"
:: Run Installations
:: Specify all of the installations for each app.
:: Step 2. Match on the application names and perform the installation for each
if "%App%" EQU "One" echo Run Install for App One here
if "%App%" EQU "Two" echo Run Install for App Two here
if "%App%" EQU "Three" echo Run Install for App Three here
if "%App%" EQU "Four" echo Run Install for App Four here
if "%App%" EQU "Five" echo Run Install for App Five here
if "%App%" EQU "All Apps" (
echo Run Install for All Apps here
)
:: Prevent the command from being processed twice if listed twice.
set "App[%1]="
if defined Next shift & goto Process
goto :eof
:End
endlocal
pause >nul
you may use choice.exe see here : http://ss64.com/nt/choice.html
You want to use set /p Example below:
echo What would you like to install?
echo 1 - App1
echo 2 - App2
set /p whatapp=
if %whatapp%==1 (
codetoinstallapp1
) else if %whatapp%==2 (
codetoinstallapp2
) else (
echo invalid choice
)
Here's a trick I learned:
echo.1) first choice
echo.2) second choice
echo.3) third choice
echo.4) fourth choice
:: the choice command
set pass=
choice /c 1234 /n /m "Choose a task"
set pass=%errorlevel%
::the choices
if errorlevel 1 set goto=1
if errorlevel 2 set goto=2
if errorlevel 3 set goto=3
if errorlevel 4 set goto=4
goto %goto%
While I use only 1-4 it would be very easy to add more possible choices.
#echo off
:menu
cls
echo.
echo Select the case color you want to create:
echo ==========================================
echo.
echo App 1
echo App 2
echo App 3
echo App 4
echo.
echo ==========================================
echo Please answer Y/N to the following:
set /p App1= Install App 1?
set /p App2= Install App 2?
set /p App3= Install App 3?
set /p App4= Install App 4?
if /I "%App1%" EQU "Y" goto :Option-1
if /I "%App1%" EQU "N" goto :1
:1
if /I "%App2%" EQU "Y" goto :Option-2
if /I "%App2%" EQU "N" goto :2
:2
if /I "%App3%" EQU "Y" goto :Option-3
if /I "%App3%" EQU "N" goto :3
:3
if /I "%App4%" EQU "Y" goto :Option-4
if /I "%App4%" EQU "N" goto :End
:Option-1
App 1 Loc.
goto 1
:Option-2
App 2 Loc.
goto 2
:Option-3
App 3 Loc.
goto 2
:Option-4
App 4 Loc.
:End
Exit
Menu with analog of checkbox.
#echo off
set size=3
::preset
set chbox2=x
:prepare
for /L %%i in (0,1,%size%) do (
if defined chbox%%i (
set st%%i=Y
) else (
set chbox%%i=
)
)
:menu
cls
echo.
echo 1. [%chbox1%] name_1:
echo.
echo 2. [%chbox2%] name_2:
echo.
echo 3. [%chbox3%] name_3:
echo.
echo.
echo.
choice /C 1234567890qa /N /M "Select [1-9] >> [a]pply or [q]uit:"
echo.
set inp=%errorlevel%
if %inp%==11 (
exit
)
if %inp%==12 (
call :apply
)
::switch
if defined st%inp% (
set st%inp%=
set chbox%inp%=
) else (
set st%inp%=Y
set chbox%inp%=X
)
goto :menu
:apply
for /L %%i in (0,1,%size%) do (
if defined st%%i (
call :st%%i
echo.
)
)
echo.
pause
goto :menu
:st1
echo First Command
goto :eof
:st2
echo Second Command
goto :eof
:st3
echo Third Command
goto :eof
You can set lines checked as defaults under :preset label.
A batch file is a list of command prompt commands. The following code prints to the terminal:
echo whateveryouwant
print your menu using these echo statements in a batch file.
Getting user input can be found here: How to read input from console in a batch file?
The installing of applications is a little more complex - you need to know the requirements of your apps and where files should be moved - that should be simple, as well; use move on the appropriate files in the appropriate place.
Here's an example of a batch script menu I'm using:
#echo off
setlocal
:begin
cls
echo [LOCAL ACCOUNTS REMOTE ADMIN] --------------------------------------
echo 1 -- List local accounts on a remote machine
echo 2 -- Create a local account on a remote machine
echo 3 -- Change a local account password on a remote machine
echo 4 -- Delete a local account on a remote machine
echo;
echo 5 -- exit
echo;
set /P rmFunc="Enter a choice: "
echo --------------------------------------------------------------------
for %%I in (1 2 3 4 5 x) do if #%rmFunc%==#%%I goto run%%I
goto begin
:run1
rem list local accounts code
goto begin
:run2
rem create local account code
goto begin
rem and so on, until...
:run5
:run9
:run99
:runx
endlocal
goto :EOF
The most relevant bits are the set /p line and the for...in lines. The for...in line basically compares the choice entered with every menu item number, and if match, goto run#; otherwise start over from the beginning.
I saw that none of the above answers completely answered his/her question. One feature that they have left out is selecting all the software it installs in one go (so to speak).
So I made this off the top of my head (extremely sorry if there is something wrong with it, I'll edit it if there is).
#echo off & setlocal enabledelayedexpansion
echo What would you like to install?
::Put your options here, preferably numbered.
set /p op=Type the numbers of the software you want to install (separated by commas with no spaces. E.g: 1,3,2):
for /f "delims=, tokens=1-5" %%i in ("op") do (
set i=%%i
set j=%%j
set k=%%k
set l=%%l
set m=%%m
)
if %i%X neq X set last=1b & goto %i%
:1b
if %j%X neq X set last=2b & goto %j%
:2b
if %k%X neq X set last=3b & goto %k%
:3b
if %l%X neq X set last=4b & goto %l%
:4b
if %m%X neq X set last=%m% & goto %m%
goto next
:1
::Put the code for doing the first option here
goto %last%
:2
::Put the code for doing the second option here
goto %last%
:3
::Put the code for doing the third option here
goto %last%
:4
::Put the code for doing the fourth option here
goto %last%
:5
::Put the code for doing the fifth option here
goto %last%
:next
::Put some more stuff here...
So that was a bit excessive. Feel free to change some things around and such.
What the code is doing is getting the user input (such as if you put in "1,3,4"), putting each number into its own variable, checking if that variable is empty, and if it isn't, sending you to code that does whatever the option was. It does this a few times until all the variables have been assessed.
This is a proposed analysis for improvement on David Ruhmann's code relating to the "Validate Input" section above:
Testing the menu for special characters works a charm except for the following characters "^&<". When each are submitted for input the program closes.
set "Input=%Input:"=%"
set "Input=%Input:^^=%"
set "Input=%Input:>=%"
set "Input=%Input:<=%"
set "Input=%Input:^&=%"
set "Input=%Input:|=%"
set "Input=%Input:(=%"
set "Input=%Input:)=%"
:: Equals are not allowed in variable names
set "Input=%Input:^==%"
Escaping the ^ and & works, but something very peculiar going on with the parsing of "<" and ">" (escaping these doesn't appear to work). If we reverse the order of the two statements as in the above amendment we find "<" works, but now ">" doesn't.
However, shifting the second statement with "<" down thus, both redirection characters work but now ")" doesn't!!
set "Input=%Input:"=%"
set "Input=%Input:^^=%"
set "Input=%Input:>=%"
set "Input=%Input:^&=%"
set "Input=%Input:|=%"
set "Input=%Input:(=%"
set "Input=%Input:)=%"
set "Input=%Input:<=%"
:: Equals are not allowed in variable names
set "Input=%Input:^==%"
Another great tutorial for batch menus is found here.
I'm using this
#echo off
:a
echo Welcome to a casual log-in (you are a idiot)
echo.
pause
echo ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
set /p c=Email:
echo ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
set /p u=Password:
echo ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
msg * Welcome %c%.
goto a
There is actually an extremely easy way to do this.
#echo off
echo Which app do you want to install?
echo [APP 1]
echo [APP 2]
echo [APP 3]
echo.
echo Type 1, 2, or 3.
set /p "AppInstaller=>"
if %AppInstaller%==1 goto 1
if %AppInstaller%==2 goto 2
if %AppInstaller%==3 goto 3
:1
[INSTALL CODE]
:2
[INSTALL CODE]
:3
[INSTALL CODE]
The menu, when coded like this, will look like this:
Which app do you want to install?
[APP 1]
[APP 2]
[APP 3]
Type 1, 2, or 3.
>_
The code sets the variable AppInstaller to 1, 2, or 3. The file determines this and redirects you to an installer for each one.
This is fairly easy code that I use a lot in multiple choice games:
#echo off
color 0a
cls
:download
echo App 1
echo App 2
echo App 3
echo App 4
echo App 5
echo All Apps
echo
echo Select What App (1, 2, 3, ect.):
set /p apps=
if %apps%==1 goto 1
if %apps%==1 goto 2
if %apps%==1 goto 3
if %apps%==1 goto 4
if %apps%==1 goto 5
if %apps%==1 goto all
:1
(Your Code Here)
:2
(Your Code Here)
:3
(Your Code Here)
:4
(Your Code Here)
:5
(Your Code Here)
:all
(Your Code Here)

I'm trying to make an auto-updating .bat program

So, how I have it done right now, is that it that it calls another bat file to update it, and then that batch file updates, and sets %ERRORLEVEL% to 1. At the start of the original program, it checks if errorlevel is 1, if yes, it goes to the main menu, but right now, it doesn't call the update file, it just goes to the menu. This is my code
Main program
IF %errorlevel% EQU 1 goto begin
call updater.bat
:begin
echo MENU
Updater
set=errorlevel 1
wget (updatelink here)
call mainprogram.bat
Right now, sometimes it works, sometimes it doesn't, which leads me to believe that some command is somehow increasing the errorlevel, but the only code before the errorlevel check is
#echo off
color 0f
cls
set currentver=v0.5.6
(check code)IF %errorlevel% EQU 1 goto begin
https://code.google.com/p/flashcart-helper/source/browse/trunk/0.6/FlashcartHelperRobocopy.bat
Here is what I have right now.
Don't play around with errorlevel. It's an internal variable. At the start of a batch, errorlevel will be 0 because all you've done is set a local variable. This will almost always ( never say never ) succeed. Also, if errorlevel is 1, and I'm reading this correctly you also seem to have an infinite loop? From what I understand of what you've said your batches are like this:
Main
#echo off
color 0f
cls
set currentver=v0.5.6
IF %errorlevel% EQU 1 goto begin
call updater.bat
:begin
echo MENU
Updater
set=errorlevel 1
wget (updatelink here)
call mainprogram.bat
As errorlevel get's overwritten each time you do anything you're asking for trouble. Change %errorlevel% to %error% and it should solve your problems. As it's a local environment variable it should also be passed between batch files. Just be careful not to use error elsewhere.
Here is a solution using Dropbox Public Folders and no wget. It uses PowerShell that in on Win7+ machines.
Update the below https://dl.dropboxusercontent.com/u/12345678/ url with your own.
It auto creates a .conf file for configuration.
Set __deploy_mode to 1 for the file on dropbox so the version file can be updated but the script not accidentally executed.
#ECHO OFF
SETLOCAL ENABLEDELAYEDEXPANSION
SET time_start=%time%
SET time_choice_wait=20
SET script_ver=1.00
SET script_name=%~n0
SET server_url=https://dl.dropboxusercontent.com/u/12345678/
SET script_name_bat=%~dp0%script_name%.bat
SET script_name_cfg=%~dp0%script_name%.conf
SET script_name_latest_ver=%~dp0%script_name%.latest.ver
ECHO %script_name% v%script_ver%
ECHO %script_ver% > %script_name%.current.ver
IF NOT EXIST "%script_name_cfg%" CALL :SCRIPT_MISSING_CFG
FOR /f "delims=" %%x IN (%script_name%.conf) DO (SET "%%x")
IF %__deploy_mode% EQU 1 GOTO :EOF
IF %auto_update_compare% EQU 1 CALL :SCRIPT_COMPARE_VER
:SCRIPT_MAIN
REM =======================================
REM === EDIT BELOW THIS LINE ==
REM TODO Add main content
ECHO.
ECHO Waiting for content...
REM === EDIT ABOVE THIS LINE ==
REM =======================================
GOTO END
:SCRIPT_MISSING_CFG
ECHO Creating new %script_name%.conf file...
ECHO __deploy_mode=0 > "%script_name_cfg%"
ECHO repository_base_url=%server_url% >> "%script_name_cfg%"
ECHO auto_update_compare=1 >> "%script_name_cfg%"
ECHO auto_update_download=1 >> "%script_name_cfg%"
ECHO Update %script_name%.conf as needed, then save and close to continue.
ECHO Waiting for notepad to close...
NOTEPAD "%script_name_cfg%"
GOTO :EOF
:SCRIPT_COMPARE_VER
ECHO Please wait while script versions are compared...
Powershell -command "& { (New-Object Net.WebClient).DownloadFile('%server_url%%script_name%.current.ver', '%script_name_latest_ver%') }"
IF NOT EXIST "%script_name_latest_ver%" GOTO END
SET /p script_latest_ver= < "%script_name_latest_ver%"
IF %script_ver% EQU %script_latest_ver% CALL :SCRIPT_COMPARE_VER_SAME
IF %script_ver% NEQ %script_latest_ver% CALL :SCRIPT_COMPARE_VER_DIFF
GOTO :EOF
:SCRIPT_COMPARE_VER_SAME
ECHO Versions are both %script_name% v%script_ver%
GOTO :EOF
:SCRIPT_COMPARE_VER_DIFF
ECHO Current Version:%script_ver% ^| Server Version:%script_latest_ver%
IF %auto_update_download% EQU 1 GOTO SCRIPT_DOWNLOAD_SCRIPT
ECHO.
ECHO Would you like to download the latest %script_name% v%script_latest_ver%?
ECHO Defaulting to N in %time_choice_wait% seconds...
CHOICE /C YN /T %time_choice_wait% /D N
IF ERRORLEVEL 2 GOTO SCRIPT_DOWNLOAD_NOTHING
IF ERRORLEVEL 1 GOTO SCRIPT_DOWNLOAD_SCRIPT
IF ERRORLEVEL 0 GOTO SCRIPT_DOWNLOAD_NOTHING
:SCRIPT_DOWNLOAD_SCRIPT
ECHO Please wait while script downloads...
Powershell -command "& { (New-Object Net.WebClient).DownloadFile('%server_url%%script_name%.bat', '%script_name_bat%') }"
ECHO Script Updated to v%script_latest_ver%^^!
REM User must exit script. Current batch is stale.
GOTO :END
:SCRIPT_DOWNLOAD_NOTHING
GOTO :EOF
:END
SET time_end=%time%
ECHO.
ECHO Script started:%time_start%
ECHO Script ended :%time_end%
:END_AGAIN
pause
ECHO.
ECHO Please close this window
ECHO.
GOTO END_AGAIN
You can do that through these steps:
1.put two files in server,a config file, a higher version bat file which need to update; set last version num. in config file.
2.client bat should be checked update at every startup time. you can read the news version in server config file, then compared to local bat file version. if not equal, so do update, else other wise.
Do you have any problems?

Resources