I am wondering if there is a way to spawn a window inside a canvas, setting it's movable boundaries to be inside the Canvas. I figured out how to contain a window's movable range within a window but I cannot figure it out for a panel. If you can use this towards a solution, I'm all ears for that too.
Also, is there a way to grab a canvas' Left and Top coordinates?
Thanks in advance!
Related
I am new to silver light and would like to understand a bit more from the pros. Let me tell you what I am trying to do. I am into photography and my goal is to create a web site that allows users to view their images and be able to rotate, zoom, crop, special effect etc. I have developed the web site that allows users to order pictures but now I want to start working on the actual picture/image manipulation. So for testing i put a canvas and a rectangle( with an image). Placed a slider and was able to link the slider to the rectangle. As i increase the slider the image gets larger. But I was kind of hoping as the image gets larger it does not surpass the boundries of the canvas. I assumed that is what it means by being a child of a canvas. Am i mistaken? If so how do you suggest me doing this? Remember I am very new to this and may be going about this very wrong.
Thanks!
Your are right. In Silverlight (like in WPF, WinForms etc.) gui-elements form a hierarchy of elements wherein controls can act either as parents or as children.
The reason why your rectangle surpasses the boundaries of it's container lies in the way controls are getting aligned. This depends on what kind of container you want to place your child into.
In a canvas for example you position the children with absolute measurements (left, top, height, width). In a self-organizing container like the StackPanel you choose an horizontal alignment (Left, HCenter, HStretch, Right) or a vertical alignment (Top, VCenter, VStretch, Bottom) which determines the childs behavior when you place it inside the parent. Furthermore you can specify the dimension of the child (Width, Height) and an optional margin which determines the gap between the Top, Right, Bottom and Left bound of your child to its enclosing parent.
But what ever container you choose it's inherent to it that you can let its children surpass its boundaries e.g. with a margin that is negative or greater than the container boundaries or simply by an child that is bigger in dimension that its container as you described the situation with your rectangle.
In your case I would consider working with the idea of clipping. Clipping simply means to
(1) define an geometrical area (in Silverlight and WPF it is a Path object) which lies over some graphical context (some section of your ui or your control etc).
(2) what lies inside the boundaries of this clipping area remains visible and everything else remains invisible.
So you can think of a clipping area as a window onto your screen which you use to look through.
When you are using Microsoft Blend this is easy to realize:
(1) Just use a geometrical shape like a Rectangle, a Circle or a custom Path.
(2) Place it somewhere upon your UI
(3) Right-click the shape, select "Path" and then "Make clipping Path"
(4) and voulà, you've just defined a clipping area which you can modify as you are used to modify controls.
Hope this gave you an idea how to deal with your problem.
cheers.
I have some problems with implementing autoscrolling in WPF (I think I could call it that way).
I have a canvas placed inside a scrollviwer. On my canvas I can dynamicly add different shapes. The position of this shapes can be changed with mouse. Everytime I add new shape on canvas or change position of shape I fire measureOverride function.Thanks to this scrollview "know" the real size of canvas and the scrollbars appear. However even if scrolbars appear, the view doesn't "follow" shape which I currently move. I mean if I reach visible part of canvas I would like canvas to srcoll.
I was trying to use this function
ScrollToHorizontalOffset()
However I have problem with proper use of that function. I was trying to use (as a parameter) canvas actualwidth but it didn't work well. I also was trying to use as a parameter current position of shape (which I move) but it works only one way. I the viewer follow the moving element if I was moving this element to right side of canvas. However if I move shape back(to the left) the view don't follow the shape.
I hope somebody will understand this :) It is hard to explain my problem.
I also was trying to use as a
parameter current position of shape
That is the correct way to implement. Waht you need is a converter, which will returns the position according to the direction you move the object.
I would like use a panel whose children have coordinates specified as percentage of total panel's width/height. Moreover, I should be able to animate the coordinate property, for example to make a button move from 10% to 50% panel's width.
I've made 2 attempts:
Use a Grid and specify size as stars - this was not enough, because AFAIK by default WPF cannot animate distance properties specified by stars. I've found somewhere a custom class that enabled me to do so, it even worked, hovewer I consider that solution overly complicated an I am looking for something simpler.
Use a Canvas with fixed width and height and put it inside a Viewbox - this is a simple solution, but when resizing the Viewbox the whole content of Canvas is resized too. I want the content to have fixed size.
Is there a simple solution or should I implement my own panel (or maybe extend one of the existing ones, i.e. Canvas)?
Cheers!
I would:
subclass Canvas, perhaps calling it RelativeCanvas or RatioCanvas
add two attached properties: XRatio and YRatio
override ArrangeOverride and loop over all children. For each child, use their XRatio and YRatio along with the ActualWidth and ActualHeight of the RelativeCanvas to calculate and apply values for their Canvas.Left and Canvas.Top attached properties
You would use it as follows:
<local:RelativeCanvas>
<!-- the top-left of this button will be center of panel -->
<Button local:RelativeCanvas.XRatio="50" local:RelativeCanvas.YRatio="50"/>
</local:RelativeCanvas>
One thing you might like to add after you get that working is control over alignment. For example, I might to align the center of a control to the specified ratio, not its top-left corner.
There's one here: WPF Proportional Panel
I'm trying to modify the default graph viewer of the Graph# library because its user interface is awful (just try dragging a node outside of the boundaries, you'll see!)
The basic setup is this: there is a GraphCanvas control (inherited from Panel) which has children of Vertex and Edge control types. What I want to achieve is:
GraphCanvas has scroll bars if the contents do not fit in the screen;
GraphCanvas can also be scrolled by "dragging" it (just click on an empty space and drag);
GraphCanvas can be zoomed in and out (via CTRL+mouse wheel);
Vertices can be dragged around. If a vertex is dragged outside the current boundaries of GraphCanvas, the boundaries are increased. The scroll bars should reflect this, however the current viewport should not scroll away while the vertex is being dragged . The same goes if dragging a vertex reduces the boundaries of GraphCanvas - it should stay the same size until the drag operation is finished and resize only then. Automatically scrolling the viewport during a drag operation is awfully confusing and easily introduces dragging errors. See the original implementation if you want to know what I mean.
Although I've got a fair bit of experience with .NET, I'm still a complete beginner in WPF. My current attempt is (in the measure/arrange layout phase) to give each vertext the XY coordinate it desires (even if negative) and implement zooming/scrolling by handling mouse events on the GraphCanvas and modifying the RenderTransform property. Dragging just changes the XY coordinates on the specific vertex (probably triggering the re-layout of the whole thing which would be nice to avoid too). Scrollbars are implemented by placing the GraphCanvas inside a ScrollViewer and implementing IScrollInfo on the GraphCanvas.
Unfortunately there seems to be a problem: I can get mouse events on the GraphCanvas itself only if it has a background at the point. That would be OK, I want a white background anyway, but in the negative coordinates of the GraphCanvas it does not draw the background - and thus does not respond to mouse events.
I'm also wondering if I'm doing the Right Thing by allowing all my child controls (vertices and edges) to go into negative coordinates. How would you implement this?
Added: To clarify about the background problem check out the following screenshot:
(source: valts.21.lv)
What you see here is a simple Windows Forms form with a WPF Host control on it. That has a ScrollViewer in it, and the ScrollViewer has the GraphCanvas in it. The GraphCanvas contains 4 vertices and 6 edges.
The GraphCanvas is stretched to fill the ScrollViewer. But since some of the vertices are at negative coordinates, it has a RenderTransform applied which simply shifts everything to the right (TranslateTransform). It also has a white background brush.
Note the gray area on the left. That's still a part of the GraphCanvas, but the background brush somehow doesn't exted there. Also, if I left-click there with my mouse (not on a node, but on the gray area), I do NOT get an event. If I left-click on the white area, I get all events just fine.
Call CaptureMouse on canvas.mouseDown and ReleaseMouseCapture on mouse up. Also, if you set your canvas background to transparent it will still be hit testable
You can attach a 'Draggable' behavior to each element.
Been checking the web and this site, but couldn't come up with any descent results.
Is there a way to make a canvas in WPF show scrollbars on overflow ? Been trying the scrollviewer, but can't get it to work :(
Thanks in advance..
The problem you're running into is that Canvas, unlike many WPF panels and containers, does not size to contents. That means if you add an element which goes outside the canvas boundaries it will not update it's size. Hence embedding a Canvas in a ScrollViewer will do no good unless you manually update the size of the Canvas.
It sounds like what you want is a Canvas which supports size to contents. This blog entry has exactly that control.
http://themechanicalbride.blogspot.com/2008/11/auto-sizing-canvas-for-silverlight-and.html
I took a different approach and abandoned the Canvas for Grid. The Canvas is more performant but for my purposes at least I haven't noticed a difference. The grid can mimic the behavior of canvas by doing the following.
Create a single row,single column grid.
Set the HorizontalAlignment to Left
Set the VerticalAlignment to Top
Use Margin "x,y,0,0" to set the position.
Bam..works just like canvas and it works great in a Scrollviewer.