I am trying to connect to a SQL Server Express instance on my laptop; I have SQL Server 2008 installed in my system, but when I try to put the instance (local)/SQLEXPRESS or Jashobanta-PC/SQLEXPRESS in my system, I am not able to connect to it. It is appearing that it is not even present in my system.
I am getting the following error :-
A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online..
I have tried using the SQLCMD command tool also for this, but the result is same:-
sqlcmd -E -S .\SQLEXPRESS
Here also the same error is appearing.
Is there any chance that SQLEXPRESS is not installed in my system? But as MVC Code First uses SQL Server Express, I need it. When I use code first, then the files are created fine, but how it is connecting, where it is creating the database, it is not known.
Any suggestions will be helpful.
Thanks in advance
Jashobanta
I had a similar issue to this, so for google purposes I'll list my result.
My take on the problem was that I had a SQL2008 Express instance, that had 'gone dark' because I'd installed a full instance of SQL2008R2 and/or SQL Express 2012. My guess is that one or the other of these turns off the out-of-date express instance as a security risk.
These instances were installed as fresh instance names, but somewhere along the way my (local)\SQLEXPRESS instance was disabled.
Using this link I used the SQL2008R2 installer to upgrade the SQLEXPRESS instance that the installer detected.
Once the SQLEXPRESS instance was upgraded to 2008R2 it was happily re-enabled and accessible at (local)\SQLEXPRESS, with all my previous databases inside it.
I have a same problem just now. What you need to do to resolve the problem is to install SQL Server 2008 Express edition.
You can do this by searching "SQL Express" from Web Platform Installer and install "SQL Server 2008 Express with Advanced Series" and "SQL Server 2008 Express with Tools".
Or
Download from this url and install.
http://www.microsoft.com/en-us/download/details.aspx?id=1695
.\SQLEXPRESS is SQL Express for SQL Server 2008 while
(LocalDB)\v11.0 is SQL Express for SQL Server 2012 / 14
Related
I have a problem with SQL Server 2008 R2, when I try to connect to server it gives me the following message:
TITLE: Connect to Server
Cannot connect to (local).
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
(Microsoft SQL Server, Error: 2)
I found a couple of solutions for this, one of which told me to go the configuration manager and check the instance created by SQL Server. There was none. I found only this:
I need to learn SQL Server for a job, and I don't know what to do.
-- UPDATE --
I reinstalled SQL Server 2008 and some errors might have something to do with my issue..
errors in reinstalling
note: the first time I installed I was basically clueless, I might had the same errors before and I simply didn't notice..
This seems you only install SQL Server Management studio not whole SQL Server DBMS so you need to install SQL Server and then try again.To check that SQL Server is installed on my PC or not You can follow these Steps
1.In Window Run Type `services.msc`
2.Check that SQL Server Service is present or not
3.If Present Then Check in Running Mode or not.
4.if not here still SQL Server is not installed
Hope this helps you
You need to install SQL server and SQL Server studio management tool. Seems you are trying to install SQL Server 2008.
Go to this link and download the version of SQL Server 2008 you are after
32 or 64 bit
https://www.microsoft.com/en-au/download/details.aspx?id=1695
Then install a Microsoft SQL Server 2008 Management Studio.
https://www.microsoft.com/en-au/download/details.aspx?id=7593
If you have windows 8.1 and upwards you can install the newer version of MSSQL which comes with Management studio. https://www.microsoft.com/en-us/sql-server/sql-server-downloads.
I'm trying to connect to Analysis Services in SQL Server 2014 on server (local), but appears this error:
Cannot connect to (local). Additional Information: A Connection cannot
be made. Ensure that the server is running.
(Microsoft.AnalysisServices.AdomdClient) A connection cannot be made
because the destination computer had refused.
Please help me solving this.
I am using Developer edition.
In my case, MS Analysis Services was not installed and that's why it was giving error. I ran the setup.exe to launch the installation wizard to add Analysis Services feature in my MS Sql Server and then it got resolved.
Since, I am using everything on one machine which is Windows Server 2012, I didn't require to make any change in firewall setting.
I dont know much about sql server.
I have just re-installed windows 7 on my laptop. After that I installed Visual Studio 2012 Express Edition. I also Installed SQL Server Management Studio 2008 R2.
Now when I try to log in to sql server management studio by using server name as . or (local) or .\SQLEXPRESS or PC-Name\SQLEXPRESS and using Windows Authentication I get the error as below.
Please dont mark this question as negative as I have searched on google for last 4 hours but did not understand the problem.
Update:
There are many reasons that may cautioning the problem:
SQL Server is not running
SQL Server is not properly configured
You try to connect with a worng instance Name
You can try the following:
Go to Mycomputer->Rigt Click->Manage->Application and Services
And from there check that SQL Server Express is running
2.From there also, gCheck the Instance name of your SQL Express and be sure when you log on to Management Studio you Provide the same Instance name
Confirm that the service is installed and running. Under Computer Management, drill-down into Services and Applications -> Services.
There should be a service named "SQL Server (SQLEXPRESS)". Try a restart or start of the service.
If any other instance of SQL Server is installed it will be listed - try connecting to LOCALHOST(whatever the instance is listed as) to verify the installation is functional.
UPDATED following further information from comments:
You may have only installed the client tools (management studio), and have not installed the database service. Ensure you have the correct installer which includes the database services engine.
First check that the SQL Server parameters are set accordingly.
Go to Start -
All Programs — Microsoft SQL Server 2008 R2 — Configuration tools —
SQL Server Configuration Manager
Under SQL Server Services, make sure that the instance is running :
SQL Server ()
SQL Server Browser
Under SQL Server Network Configuration - Protocols for (), these are enabled:
TCP/IP
Named Pipes
Do the same under SQL Native Client 10.0 under Client Protocols
I cannot get my local computer to run SQL Server. I looked in the SQL Server configuration manager and noticed that there are no SQL Server Services listed. That can't be right. I also noticed that There are two Managers listed in the SysWOW64 folder (I'm running Win7): SQLServerManager10.msc and SQLServerManager.msc. Neither show any services at all. When trying to connect via SSMSE, I get the standard:
A network related or instance specific error occurred while establishing a
connection to SQL server...
I haven't installed a prior version, but did try to uninstall and reinstall using the Web platform installer from Microsoft. Any suggestions?
Thanks
I had the same problem and as Brian said, I was missing SQL Server Express. So I download SQL Server 2008 R2 Express and I installed it. now everything works fine.
Note that I thought I already installed it when I installed SQL Management Studio R2. Now, be aware that when installing SQL Management Studio R2, you are not installing SQL Server and you won't get any SQL Server Services in your Sql Server Configuration Manager -> SQL Server Services. You also need to download and install SQL Server Express.
Is SQL Server listed in services? (Start->Run->Services.msc)
If so, is it running?
That is an instance error, meaning you cannot connect to the instance. Most likely there is no instance installed on this machine. Meaning your not connecting correctly to the instance. Connect to the database engine again and check the server name and make sure your connecting to the correct server name or the local host, depending if this is a local machine or if this is on a server. Go back through setup and see if there are any features that didn't get installed. Try that and see if it works. If not then reinstall SQL Server and make sure all folders are removed and nothing is left behind before you reinstall.
i m using sql server 2005 with service pack-2.
When I connect sql server with by registering the remote server with IP, username and password. I have done all the neccessary setting for connecting remotely "SQL Server 2005 Surface Area Configuration".
i got following error while connection:
This version of Microsoft SQL Server Management Studio can only be used to connect to SQL Server 2000 and SQL Server 2005 servers. (ConnectionDlg)
Can you please provide me possible reasons for the above mentioned error.
Thanks,
Saurabh
I would also add that this can also happen if you are trying to connect to a lower version too!
I would also suggest checking which version of SQL 2005 you are attempting to connect to and make sure it is a RTM or higher, and not an older CTP release.
The other possibility is that there is another SQL Server instance (not 2000, or 2005) running on the IP that you are connecting to. Try connecting via server or instance name if possible.
Kev
Only reason for this can be if you are trying to connect to higher version of SQL Server. Please check again if it is SQL Server 2005 or 2008 you are trying to connect.
Here is similar problem and solution for it at sql-server-performance site
edit:- also if you have installed some version of SQL Server 2008 it may also break Management Studio.
Right - to get to the bottom of this I would check the version from the command prompt, from the machine experiencing the problem:
sqlcmd -Q "SELECT ##VERSION" -S myserver\myInstance -U myUserName -P myPassword
This will give you the version of SQL Server you are connecting to. 'sqlcmd' will run against old and new versions of SQL Server.
You can use the same technique, with different SQL to identify which server you are really connecting to, etc.