I'm very new to Studiolab and I was trying to uninstall some packages I installed with pip. I was lazy and found this script online that did this for me. I ran "python -m pip freeze > requirements.txt" followed by "python -m pip uninstall -r requirements.txt". In the process, I deleted a couple important packages including amzn-sagemaker-studiolab. Could you point me in the right direction as to how I may be able to reset my environment to the default one. I am entirely okay with starting fresh, like I never worked on the environment before but my UI right now is pretty unusable and I can't figure out how to re-install the packages I deleted.
Most of the information is present in the details.
Here are the commands you can use to reinitialize Studio Lab environment:
Open Terminal from JupyterLab IDE
Make sure you are under your home directory
Run rm -rf ..?* .[!.]* * and restart your project runtime, that should reset it
If that still does not work, the only recommendation we have is to delete and recreate your account.
adb server version (39) doesn't match this client (40); killing...
could not read ok from ADB Server
* failed to start daemon
error: cannot connect to daemon
adb: error: failed to get feature set: protocol fault (couldn't read status): Connection reset by peer
* daemon not running; starting now at tcp:5037
* daemon started successfully
- waiting for device -
error: protocol fault (couldn't read status): Connection reset by peer
I have the same issue when running adb devices command.
adb devices
List of devices attached
adb server version (36) doesn't match this client (40); killing...
* daemon started successfully
2322dc3d device
I ran command which adbwhich gave me the location of the adb that the previous command was using, in my case output was:
which adb
/usr/bin/adb
Then i ran whereis adb command which gave me the location of adb's:
whereis adb
adb: /usr/bin/adb /home/arefin/Android/Sdk/platform-tools/adb
/usr/share/man/man1/adb.1.gz
I get rid of this problem by moving the adb from /usr/bin directory with mv command: (meaning this is of no use thus instead of deleting just put in desktop),
/usr/bin$ `sudo mv adb /home/arefin/Desktop/`
After this i executed this command adb kill-server then ran adb devices. I found everything is fine this time.
My Android development related path in in $HOME/.profile file is, as below:
export ANDROID_HOME=/home/arefin/Android/Sdk
export PATH=$PATH:$ANDROID_HOME/platform-tools
export PATH=$PATH:$ANDROID_HOME/tools
export PATH=$PATH:$ANDROID_HOME/emulator
export PATH=$PATH:$JAVA_HOME/bin
When encountered this error in Linux,I deleted the adb file in my
/usr/bin/
and replaced with one which located in path (usually in home path)
~/Android/Sdk/platform-tools/
and it worked.
As pointed out in previous answers, this is due to having multiple adb versions installed in your system. Probably one from the android-sdk-platform-tools installed via apt and other from Android Sdk itself (which is usually newer version).
The simplest way to solve this in Ubuntu (or Ubuntu-based OS's) is to add this line at the end of ~/.bashrc file:
alias adb='~/Android/Sdk/platform-tools/adb'
#Change path according to your Android Sdk installation directory
And then reopen terminal for changes to reflect.
This avoids the need to mess with system files as well.
Probably you have two versions of adb in two different locations in your system. The running server version is 39 and the adb client version is 40. You can resolve this by keeping only one adb in your PC.
You can figure it out as shown below-
In Linux below command gives you adb location if adb binary is added to path.
which adb
if adb is not added to path and still you are getting this error then search for adb using below command.
locate adb
if your adb client is other than above location, you may add newest version to above path and delete the old adb version.
If you are using windows, you figure it out the two adb locations and keep only at single place.
I know this is a little old, but if you have this problem and you have Vysor installed, then you can resolve it by looking in the Vysor application folder for the adb.exe (and Adb*.dll files) and replacing them from your Android SDK folder. I'm on a Windows machine and the relevant paths for me were:
Vysor
C:\Users\\AppData\Roaming\Vysor\crx\gidgenkbbabolejbgbpnhbimgjbffefm\app-2.1.7.crx-unpacked\native\win32*
(I'm guessing the path will vary according to the version, etc, but this will hopefully help figure it out.)
APK
C:\Users\\AppData\Local\Android\Sdk\platform-tools
On my machine, the relevant files were:
adb.exe,
AdbWinApi.dll,
AdbWinUsbApi.dll
After this, you will need to kill the existing ADB task as described in the other answers to this post.
Solved by
Open terminal in Android studio
adb kill-server
sudo cp ~/Android/Sdk/platform-tools/adb /usr/bin/adb
sudo chmod +x /usr/bin/adb
adb start-server
Run
tasklist | findstr adb
then kill the duplicate process
TASKKILL /PID "PID_NUMBER" /f
Encountered this problem myself, none of the solutions online worked for me.
did this by chance and it solved my problem!
I'm using Android Studio on a Macbook Pro.
first I tried to install adb from brew:
brew cask install android-platform-tools
then I uninstalled it:
brew cask uninstall android-platform-tools
After the last line adb didn't work in terminal but did work in Android Studio immediately! =D
posted so it may help someone else - good luck!
For ubuntu (more precise - kubuntu) i had the similar problem.
The problem was in android-studio, to fix it you need to do these steps:
Go to SDK-Manager
In SDK-Manager click the SDK Tools menu.
Uncheck "Android SDK Command-line Tools (latest)"
I had the same issue connecting to my SFTP Server app and could solve it as follows:
The error was caused (in my case, Ubuntu 18.04.5 LTS) by conflicting adb installations. One Installation coming with AndroidStudio (IntelliJ) located in .../Sdk/platform-tools and one coming with the package manager installation apt install located in the standard directory for executables /usr/bin. The installation location for AndroidStudio (IntelliJ) can be found in the AndroidStudio (IntelliJ) Menu: Tools → Android → SDK Manager: Android SDK Location. And the installation location related to the package manager can be found invoking the command which adb.
And the solution to this problem is to uninstall one of them.
Depending on your use case, if you’re most of the time working with AndroidStudio (IntelliJ) (and this version is up to date), then remove the (outdated) version installed with the package manager as follows.
To uninstall first find out which packages relates to /usr/bin/adb with the following command: dpkg -S /usr/bin/adb.
And then call apt autoremove adb to uninstall the adb package and all its dependencies.
And last but not least in order to still being able to call adb from the command line update the PATH variable in “/etc/profile”, if it should be accessible for all users, or ~/.bash_profile or ~/.profile (whichever exists) if it should only be accessible for the current user and append the path “.../Sdk/platform-tools” (that you looked up above) at the end. And then reboot or log-out & log-in for the new path to get applied.
In ubuntu
delete the adb
-> usr/bin
-> (delete command) sudo rm -rf /usr/bin/adb
Android/Sdk/platform-tools/adb
-> copy this folderpath.
paste into
->usr/bin
->(paste command) sudo ln -s /home/yourfile/Android/Sdk/platform-tools/adb /usr/bin
restarting your system, would also work for you.
I have faced the following error and what worked in my case was just to restart the system.
could not read ok from ADB Server
* failed to start daemon
error: cannot connect to daemon code here
adb.exe: failed to check server version: cannot connect to daemon
I had a similar error. Two different adb versions were conflicting with each other which caused it to keep restarting.
Run this command in terminal => where adb.exe
This will show you where the different adb files are. You can look at the file property date to see which is the latest one. Then copy the latest one and use it to overwrite/replace the older one(s). This will make both adb versions be the same and prevent a conflict.
This generally happens when there are two adb paths are available. Uninstall one will help
--> npm uninstall adb
This worked in my case.
None of the other solutions worked for me - Windows/WSL2-Ubuntu
The error is misleading but for me it was cos the adb port 5037 was in use.
Solution: find and kill the process using port 5037
Windows: netstat -aon | findstr 5037 and Stop-Process -Id <id-from-netstat>
WSL will attempt to connect to Windows port 5037
In my case wsl Ubuntu has different adb --version than Windows, I don't have to keep my Android Studio latest(since this might not your choice and do not guarantee same version as apt) or try with $PATH(wsl run Windows exe is not make sense).
The solution is simple, I download both Linux and Windows SDK Platform-Tools from official site which guarantee same version, then invoke relevant adb on each platform.
In my case I'd installed "AirDroid" on my windows machine and it runs "AirDroid_adb.exe", I had to kill that to get things to work. I have reported that they are using an old version of adb and they will hopefully fix it.
A Working Simple Answer for Windows:
make sure you have the sideload file (whatever.bin) in a sub directory of your adb executable.
make sure your adb executable folder, and sub directories are in PATH (look up DOS commands for PATH in Windows)
open a command prompt in the same directory as the sideload file
enter your command for example:
adb sideload mynewrom-5.4.3.2.1.bin
(Your device needs to be in recovery - sideload state before you send)
I tried many different ways to add an executable (winforms) created in C# using mono to start automatically after login, but any attempt was not right.
Does anyone know how can I do it? I'm running a Raspbian (Raspberry Pi).
Thanks since now!
I guess your idea was to launch the app in the desktop, but if you need it as a "kiosk", I always use:
Steps to configure the Raspberry Pi to run as a kiosk with the presentation
Software setup
sudo apt-get update
sudo apt-get upgrade
sudo apt-get install mono-complete xutils
To avoid the screen turning off
sudo nano /etc/X11/xinit/xinitrc
And now in the editor, append:
setterm -blank 0 -powersave off -powerdown 0
xset s off
xset -dpms s off
mono /path/to/your/assembly.exe
Auto start as kiosk
sudo nano /etc/rc.local
And now in the editor, replace contents with:
/bin/bash startx &
exit 0
Make sure that in sudo raspi-config start mode is configured as console
I finally found a solution. I created a myprogram.desktop and I added it to the directory /home/pi/.config/autostart. Please make sure if it exists. If don't, it is needed to create a folder called autostart and add the file there.
The myprogram.desktop should looks like:
[Desktop Entry]
Name=myprogram
Type=Application
Comment=It runs my app.
Exec=/home/pi/myprogram.exe
I tried to install generator-angularjs using Yo (Yoeman) without sudo:
npm install -g generator-angular
I get:
Error: EACCES, mkdir '/usr/lib/node_modules/generator-angular'
When I type in sudo yo, yo tells me that I should not use sudo (which is perfectly understandable).
I have a ~/node_modules directory - why doesn't yo install its packages there?
Generators are designed to be installed globally. Otherwise, you always have to install the generator you're about to use in each project, which is unnecessarily painful. Also, you don't get to see the lovely yo menu which lists you all the available generators (unless of course, you install them all locally):
Setting up npm for global installation
So, how do we get npm to install packages globally? As you correctly said, you should never, ever run yo with sudo. There are lots of different solutions to this problem and you can spend hours discussing their pros and cons religiously.
I personally dislike installing my user packages into the global /usr/ folder. /usr/ is for software that is shared across all users on the computer. Even if it's only using the machine, there are still good reasons to respect the way the Unix file system hierarchy is designed. For example if you decide at one point to wipe your whole node installation.
My preferred way of enabling npm to install packages globally without breaking out of $HOME is to set a local node prefix. This is as easy as running
echo 'prefix = ~/.node' >> ~/.npmrc
in your local shell. After that, you want to adjust your $PATH, to point to the new installation destination for global node executables by adjusting your favorite shell's config. E.g. by adding
export PATH="$PATH:$HOME/.node/bin"
to your ~/.bashrc. After that, you can happily run npm install -g generator-angular without sudo, without running into permission conflicts and if something is completely broken and you want to start from scratch, all you need to do is remove your ~/.node directory.
Thanks to #passy I managed to finally get this working on ubuntu 13.04 (in case anyone is having similar set up issues) with the following :
sudo apt-get update
sudo apt-get install python-software-properties python g++ make
sudo add-apt-repository ppa:chris-lea/node.js
sudo apt-get update
sudo apt-get install nodejs
trying to run:
npm install -g yo
resulted in
Error: EACCES, mkdir '/usr/lib/node_modules/yo'
Fixed using:
echo prefix = ~/.node >> ~/.npmrc
echo 'export PATH=$HOME/.node/bin:$PATH' >> ~/.bashrc
. ~/.bashrc
Running:
yo webapp
resulted in:
Error: EACCES, permission denied '/home/username/.config/configstore/update-notifier-yo.yml'
Fixed using:
sudo chown yourusername:yourusername /home/yourusername/.config/configstore/update-notifier-yo.yml
hi in my case (on ubuntu 12.04), the prefix addition in ~/.npmrc did not changed anything.
if so, build the node package by yourself and install it in /opt/node or /home/user/.node.
I had an almost identical error involving a rogue .yo-rc.json file in my root directory from a project I installed earlier. Yeoman was switching cwd from the installation dir to root dir half way through the installation, but was only outputting the EACCESS permissions error without any details that the installation directory was /. It took ages to figure out why this was, and involved debugging through the Yeoman source, but I eventually learned that Yeoman will look up through the directory tree until it finds a .yo-rc.json, and generate the code there by calling chdir to the new location.
Yeoman should maybe check that the user has write permissions for the directory. Alternatively, it could mention in the output either that the cwd has changed, or print the name of the installation directory if where it finds .yo-rc.json is different than cwd.
The command for finding rogue .yo-rc.json files
sudo find / -name .yo-rc.json
From yoeman getting started page appears the command:
yo doctor
In my case, $NODE_PATH (which in my case, Ubuntu 14.04, is defined in /etc/profile.d) isn't the same than npm root. Adding in npm root in $NODE_PATH solve the problem.
I have been trying to get yeoman to play nice with my vagrant box and this is what I had to do to install npm packages globally without sudo on ubuntu:
1. Create the directory to store global packages
$ mkdir "${HOME}/.npm-packages"
2. Tell npm where to put any packages installed globally
Insert this snippet into your ~/.npmrc file:
prefix=${HOME}/.npm-packages
3. Make sure that npm can locate installed binaries et cetera
Insert this snippet into your .bashrc/.zshrc:
NPM_PACKAGES="${HOME}/.npm-packages"
PATH="$NPM_PACKAGES/bin:$PATH"
// `unset` `manpath` to allow inheritance from `/etc/manpath` with
// the `manpath` command
unset MANPATH // remove this line if you have previously modified `manpath`
export MANPATH="$NPM_PACKAGES/share/man:$(manpath)"
4. Run the following or restart terminal
$ source ~/.bashrc
Hope this helps anyone who finds themselves in a similar situation.
I recently updgraded MacPorts from 1.9.2 to 2.0.3. Since then, I've lost the ability to run as sudo.
sudo: can't stat /opt/local/etc/sudoers: No such file or directory
sudo: no valid sudoers sources found, quitting
Unsure if these are related, but I'm wondering what the best course of action is at this point.
port installed returns
sudo #1.7.4p2_0
sudo #1.7.7_0 (active)
Further investigation suggests I've installed MacPorts' sudo without an accompanying /opt/local/etc/sudoers file. I've managed to create such a file using visudo, copying the content of /etc/sudoers, chmod to 0440 and ownership to root:wheel.
I guess the question now is whether I should use MacPorts' sudo or uninstall it? And how did I end up with installing the MacPorts' sudo?
Not a Mac man myself, but have a look at this page:
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man5/sudoers.5.html
...and also a look at the man page for visudo, which is used to edit the sudoers file:
http://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages/man8/visudo.8.html#//apple_ref/doc/man/8/visudo