Here is the code
printf("\n");
printf("Enter a integer vaule:");
scanf("%d" , &num3);
printf("You entered: %015d", num3);
printf("Enter a float value:");
scanf("%f", &deci3);
printf("You entered: %15.2f", deci3);
printf("\n");
the output is
Enter a integer vaule:4.4
You entered: 000000000000004
Enter a float value:You entered: 0.40
The problem is this code is not stopping at
printf("Enter a float value:");
and this scanf
scanf("%f", &deci3);
seems to be getting its value from the previous scanf
The %d conversion stops wherever the integer stops, which is a decimal point. If you want to discard the input there, do so explicitly… getc in a loop, fgets, or such. This also allows you to validate the input. The program should probably complain about 4.4.
The scanf function works this way per the specification:
An input item shall be defined as the longest sequence of input bytes (up to any specified maximum field width, which may be measured in characters or bytes dependent on the conversion specifier) which is an initial subsequence of a matching sequence. [Emphasis added.]
In your example, the following C string represents the contents of stdin when the first scanf call requests input: "4.4\n".
For this initial call, your format string consists of a single specifier, %d, which represents an integer. That means that the function will read as many bytes as possible from stdin which satisfy the definition of an integer. In your example, that's just 4, leaving stdin to contain ".4\n" (if this is confusing for you, you might want to check out what an integer is).
The second call to scanf does not request any additional input from the user because stdin already contains ".4\n" as shown above. Using the format string %f attempts to read a floating-point number from the current value of stdin. The number it reads is .4 (per the specification, scanf disregards whitespace like \n in most cases).
To fully answer your question, the problem is not that you're misusing scanf, but rather that there's a mismatch between what you're inputting and how you're expecting scanf to behave.
If you want to guarantee that people can't mess up the input like that, I would recommend using strtol and strtod in conjunction with fgets instead.
This works, but it dont complains if you type 4.4 for the int
#include <stdio.h>
int main() {
char buffer[256];
int i;
float f;
printf("enter an integer : ");
fgets(buffer,256,stdin);
sscanf(buffer, "%d", &i);
printf("you entered : %d\n", i);
printf("enter a float : ");
fgets(buffer,256,stdin);
sscanf(buffer, "%f", &f);
printf("you entered : %f\n", f) ;
return 0;
}
use a fflush(stdin) function after the fist scanf(), this will flush the input buffer.
Related
I cant figure out whats wrong. Am i using format specifiers in wrong way? Someone please help i am very new to coding.
#include <stdio.h>
#include <stdlib.h>
int main()
{
char name[20];int age;char grade;double gpa;char area[10];
printf("User Input\n");
printf("Enter your name: ");
fgets(name,20,stdin);
printf("Your name is %s\n",name);
printf("Enter your age: ");
scanf("%d\n",&age);
printf("Your age is %d\n",age);
printf("Enter you grade: ");
scanf("%c\n",&grade);
printf("Your grade is %c\n",grade);//Why is this giving an int output?
printf("Enter your gpa: ");
scanf("%f\n",&gpa);
printf("Your gpa is %f\n",gpa);
printf("Enter your area: ");
scanf("%s\n",&area);
printf("Your area is %s",area);//This shows grade input
return 0;
}
Output
You use fgets correctly when reading name. I'd recommend also using fgets for all your other inputs, and then parsing the intended values out of them. For example:
char age_str[20];
fgets(age_str, 20, stdin);
age = strtol(age_str, NULL, 10);
This is preferable to using scanf directly for non-string inputs since if input fails to match a format string, it will remain in stdin and screw up the other scanf calls.
If you would like to use scanf correctly:
Check its return value to see if it matches the number of format specifiers in the string. If not, some inputs were not successfully read. You may want to use a do/while loop for this.
Begin your format strings with a space, as in " %c", so that any whitespace remaining in stdin will be skipped over.
Don't end your format strings with a newline.
Some things to remember about scanf:
Most conversion specifiers like %s, %d, and %f will skip over leading whitespace - %c and %[ will not. If you want to read the next single non-whitespace character, use " %c" - the leading blank tells scanf skip over any leading whitespace before reading the next non-whitespace character;
For what you are trying to do, you should not use \n in your format strings - it will cause scanf to block until you enter a non-whitespace character;
You do not need to use the & operator on array expressions like area; under most circumstances, array expressions are converted to pointer expressions1. Honestly, you should read area the same way you read name, using fgets (and you should always check the result of fgets), or you should specify the maximum field width in the specifier: scanf( "%9s", area ); (a 10-element array can hold up to a 9-character string, since one element has to be reserved for the string terminator);
You should get in the habit of checking the result of scanf - it will return the number of successful conversions and assignments. For example, scanf( "%d %d", &x, &y ) will return 2 if both x and y are read successfully. It will return EOF if end-of-file is signaled or there's a read error.
scanf will read up to the next character that doesn't match the conversion specifier - IOW, if you're using %d, then scanf will skip over any leading whitespace, then read up to the next character that isn't a decimal digit. That character is left in the input stream. This means if you're using %d and type in 123e456, scanf will read up to that 'e' character and assign 123 to the target. If you try to read again with %d, scanf will immediately stop reading on that e and return 0 without assigning anything to the target (this is called a matching failure). This will continue until you remove that 'e' from the input stream (such as with getchar or fgetc or scanf with the %c specifier, etc.
You need to make sure the types of the arguments match the format specifier. %s expects an argument of type char *, %d expects int *, %f expects float *. %x expects unsigned int *, %lf expects double *, etc.
This is one of the "deeply unintuitive" aspects of C I was talking about in my comment.
I was trying c code to add but my program doesn't execute, codeblocks unfortunately closes. What is the error?
void main()
{
float a,b;
printf("%30sAddition Of Numbers\n");
printf("\nEnter Number 1: ");
scanf("%f",&a);
printf("\nEnter Number 2: ");
scanf("%f",&b);
printf("\nThe addition of %0.3f and %0.3f is %0.3f",a,b,(a+b));
}
I want to put the result of addition directly in printf statement with float inputs but I am not getting it working.
I also tried putting the result in variable a but it didn't work either.
void main()
{
float a,b;
printf("%30sAddition Of Numbers\n");
printf("\nEnter Number 1: ");
scanf("%f",&a);
printf("\nEnter Number 2: ");
scanf("%f",&b);
a=a+b;
printf("\nThe addition of %0.3f and %0.3f is %0.3f",a,b,a);
}
where am I going wrong?
The problem is in the following statement
printf("%30sAddition Of Numbers\n");
here, the format string supplied to the printf() conatins %30s (or, %s, in general) which is a format specifier (conversion specifier), and you did not supply any argument to it. It invokes undefined behavior.
To quote C11 standard, chapter §7.21.6.1
[...] If there are insufficient arguments for the format, the behavior is
undefined. [...]
You can also check the man page to find out more about the format specifiers.
EDIT:
As discussed in the below comments, if you want some spaces to appear before the output, change
printf("\t\tAddition Of Numbers\n");
That said,
void main() should be int main (void), at least, to conform to the standards.
You should always check the return value of scanf() to ensure the successful scanning.
The "%30sAddition Of Numbers\n" issue in your post has been addressed by two good answers (at the time of this post). But you asked a question in comments that may not have been answered completely:
works with %30s when i use all integer numbers and not float! how do i make it work with floats.
A generic answer to that question:
The format specifier you use in scanf(): "%f",&a could result in undesirable results if scanning in unexpected newlines, spaces or other white space. This can be addressed by modifying the format specifier string to suppress these characters. Here is a suggestion:
char* fmt = "%[^\n]%*c";//This generic format specifier, can be used for both integer
//and floating point inputs when used in conjuction
//with strtod() or strtol() (see below)
scanf(fmt, input);
Explanation of "%[^\n]%*c".
When a user is asked to enter a generic number, it might be a float or an integer. You can accommodate that by creating methods for both, and being specific about what kind of value you would like to process:
float get_float(void)
{
char input[80];
char **dummy={0};
char* fmt = "%[^\n]%*c";
printf("Enter floating point number and hit return:\n");
scanf(fmt, input);
return strtod(input, dummy);
}
long get_int(void)
{
char input[80];
char **dummy={0};
char* fmt = "%[^\n]%*c";
printf("Enter integer number and hit return:\n");
scanf(fmt, input);
return strtol(input, dummy, 10);
}
Called like this:
int main(void)
{
long integer_var = get_int();
float float_var = get_float();
float sum = (float)integer_var + float_var;
return 0;
}
Try adding getch(); function at the bottom before closing curly brackets,
like this
void main()
{
float a,b;
printf("%30sAddition Of Numbers\n");
printf("\nEnter Number 1: ");
scanf("%f",&a);
printf("\nEnter Number 2: ");
scanf("%f",&b);
a=a+b;
printf("\nThe addition of %0.3f and %0.3f is %0.3f",a,b,a);
getch();//it will hold your output screen so you can see the output
}
In this line
printf("%30sAddition Of Numbers\n");
you did not supply a string argument for the %s format. This causes undefined behaviour.
If you want the output spaced, you could try a small modification
printf("%30s\n", "Addition Of Numbers");
in this case you are supplying a string literal to satisfy the %s format.
Additionally you must always check the return value from scanf to see that it did convert the number of arguments it was supposed to. It's a basic newbie error not to, and the root cause of hundreds of SO questions.
I need to take two int values from user. First value is using field specifier and second is normal integer value.
#include<stdio.h>
int main()
{
int num, num1;
printf("Enter first number: \n");
scanf("%2d", &num);
printf("First number is %2d\n", num);
printf("Enter second number: \n");
scanf("%d", &num1);
printf("Second number is %d\n", num1);
return 0;
}
and the output is
Enter first number:
12345
First number is 12
Enter second number:
Second number is 345
It won't give control to enter second number. I don't know why?
You see this behaviour because you have limited the size of input that the first scanf statement can consume. scanf("%2d", &num) says that scanf should read a field of width at most 2 and convert that into into num.
Change the scanf to scanf("%d", &num) and the entirety of 12345 will be processed.
you don't get to enter second num because your program gets it from first num.
First time, your scanf lets your num get first two digits of the number you entered, and rest remains in the buffer/stream.
next time scanf is executed, it reads the remaining digits from the stream till an enter stroke, hence you don't get to enter the second no.
if you want to read the second no.
try flushing the stream before using second scanf(), you will get what you want.
Why would you expect it to "give control"? The fist scanf() explicitly consumed at most two digits, leaving "345" unconsumed. The next scan begins with the unconsumed input. What else would you expect?
If you want to discard any unconsumed input before the next scan, use fpurge(stdin).
There is always a tradeoff with scanf. If you want to enter a whole number and then consume the trailing newline (left in the input buffer (stdin) as the result of pressing [enter]), you canappend a %*c to read and discard the trailing newline. This itself causes problems if an empty-string is entered.
However, limiting your scanf format string and specifier to %2d and then entering 123456, you intentially leave 3456\n in the input buffer which is taken as your input to the second scanf call. The only way to insure each of your scanf calls will only accept your expected input is to manually empty the input buffer after each read by scanf to insure there are no characters remaining prior to the next call. A simple way to do this is with either a do .. while or simply a while ; using getchar() to read each character in stdin until a '\n' is encountered or EOF:
#include<stdio.h>
int main()
{
int c, num, num1;
printf("Enter first number: \n");
scanf("%2d", &num);
while ((c = getchar()) && c != '\n' && c != EOF) ;
printf("First number is %2d\n", num);
printf("Enter second number: \n");
scanf("%d", &num1);
printf("Second number is %d\n", num1);
return 0;
}
output:
$ ./bin/scanf_tradeoff
Enter first number:
123456
First number is 12
Enter second number:
12345
Second number is 12345
The reason for second value is not getting from you, in first scanf you are mentioning that
get the two values from the input. You are giving more than two that time the remaining value is stored in the buffer. So second scanf will get the value from the buffer.
If you want to avoid this you can use this statement before the second scanf.
while ((c=getchar())!='\n' && c!=EOF);// clearing the buffer.
So now the second input will get from the user.
This question already has answers here:
C: Multiple scanf's, when I enter in a value for one scanf it skips the second scanf [duplicate]
(7 answers)
Closed 8 years ago.
I am leaning C programming. I have written an odd loop but doesn't work while I use %c in scanf().Here is the code:
#include<stdio.h>
void main()
{
char another='y';
int num;
while ( another =='y')
{
printf("Enter a number:\t");
scanf("%d", &num);
printf("Sqare of %d is : %d", num, num * num);
printf("\nWant to enter another number? y/n");
scanf("%c", &another);
}
}
But if I use %s in this code, for example scanf("%s", &another);, then it works fine.Why does this happen? Any idea?
The %c conversion reads the next single character from input, regardless of what it is. In this case, you've previously read a number using %d. You had to hit the enter key for that number to be read, but you haven't done anything to read the new-line from the input stream. Therefore, when you do the %c conversion, it reads that new-line from the input stream (without waiting for you to actually enter anything, since there's already input waiting to be read).
When you use %s, it skips across any leading white-space to get some character other than white-space. It treats a new-line as white-space, so it implicitly skips across that waiting new-line. Since there's (presumably) nothing else waiting to be read, it proceeds to wait for you to enter something, as you apparently desire.
If you want to use %c for the conversion, you could precede it with a space in the format string, which will also skip across any white-space in the stream.
The ENTER key is lying in the stdin stream, after you enter a number for first scanf %d. This key gets captured by the scanf %c line.
use scanf("%1s",char_array); another=char_array[0];.
use getch() instead of scanf() in this case. Because scanf() expects '\n' but you are accepting only one char at that scanf(). so '\n' given to next scanf() causing confusion.
#include<stdio.h>
void main()
{
char another='y';
int num;
while ( another =='y')
{
printf("Enter a number:\t");
scanf("%d", &num);
printf("Sqare of %d is : %d", num, num * num);
printf("\nWant to enter another number? y/n");
getchar();
scanf("%c", &another);
}
}
I'm writing this to get student information (full name, id and gpa for the last 3 trimester, so I used structures and a for loop to plug in the information however, after 1st excution of the for loop (which means at student 2) my 1st and 2nd input are shown on screen together. How could I prevent this from happening in a simple and easy way to understand? ( P.S: I already tried to put getchar(); at the end of the for loop and it worked, however; I'm not supposed to use it 'cause we haven't learnt in class)
The part of the c program where my error happens:
#include <stdio.h>
struct Student {
char name[30];
int id;
float gpa[3];
};
float averageGPA ( struct Student [] );
int main()
{
int i;
float average;
struct Student studentlist[10];
i=0;
for (i; i<10; i++)
{
printf("\nEnter the Student %d full name: ", i+1);
fgets(studentlist[i].name, 30, stdin);
printf("Enter the Student %d ID: ", i+1);
scanf("\n %d", &studentlist[i].id);
printf("Enter the Student %d GPA for the 1st trimester: ", i+1);
scanf("%f", &studentlist[i].gpa[0]);
printf("Enter the Student %d GPA for the 2nd trimester: ", i+1);
scanf("%f", &studentlist[i].gpa[1]);
printf("Enter the Student %d GPA for the 3rd trimester: ", i+1);
scanf("%f", &studentlist[i].gpa[2]);
}
average = averageGPA(studentlist);
printf("\n\nThe average GPA is %.2f", average);
return 0;
}
float averageGPA (struct Student studentlist[])
{
int i;
float total = 0.0, average = 0.0;
for (i=0; i<10; i++)
{
total = studentlist[i].gpa[0] + studentlist[i].gpa[1] + studentlist[i].gpa[2];
}
average = total / 30 ;
return average;
}
Computer output:
Enter the Student 1 full name: mm
Enter the Student 1 ID: 12
Enter the Student 1 GPA for the 1st trimester: 3
Enter the Student 1 GPA for the 2nd trimester: 4
Enter the Student 1 GPA for the 3rd trimester: 3
Enter the Student 2 full name: Enter the Student 2 ID: <<<<< Here is the problem!!
Try eating the newline after the last scanf:
scanf("%f ", &studentlist[i].gpa[2]);
^
This is very much like your getchar solution. It's actually superior to getchar, since it only discards whitespace.
But you have to use getchar() to discard the newline character that is still in the input buffer after your last scanf("%f"), which according to given format converts a float and leave in the buffer all other chars.
If you can't use getchar(), use another fgets() at the end of the loop.. but of course getchar() would be better
Edit for explanation: whenever you type on your keyboard characters go in a input buffer waiting to be processed by your application. getchar() just "consumes" one character from this buffer (returning it), waiting for a valid char if the buffer is empty. scanf("%f") only "consumes" characters resulting in a float. So, when you type "5.12<enter>", scanf reads and removes from buffer "5.12" leaving "<enter>". So the next fgets() already finds a newline in the buffer and returns immediately; that's why you should use getchar(): ignoring its returning value you successfully discard "<enter>" from the buffer. Finally, please note that if in the buffer there is only "<enter>", scanf("%f") discards it (since it cannot be converted in a float) and waits for another input blocking application.
One last note: input stream is buffered by your OS default policy, in the sense that application does not receive any character until you type "<enter>".
Use scanf in following way to read the student name:
scanf(" %[^\n]",studentlist[i].name);
The first space in the format specifier is important. It negates the newline from previous input. The format, by the way, instructs to read until a newline (\n) is encountered.
[Edit: Adding explanation on request]
The format specifier for accepting a string is %s. But it allows you to enter non-whitespace characters only. The alternative way is to specify the characters that are acceptable (or not acceptable, based on the scenario) within square brackets.
Within square brackets, you can specify individual characters, or ranges, or combination of these. To specify characters to be excluded, precede with a caret (^) symbol.
So, %[a-z] would mean any character between a and z (both included) will be accepted
In your case, we need every character other than the newline to be accepted. So we come up with the specifier %[^\n]
You will get more info on these specifiers from the web. Here's one link for convenience: http://beej.us/guide/bgc/output/html/multipage/scanf.html
The space in the beginning actually 'consumes' any preceding white space left over from previous input. You can refer the answer here for a detailed explanation: scanf: "%[^\n]" skips the 2nd input but " %[^\n]" does not. why?
I would just say no to scanf(). Use fgets() for all input fields and convert to numeric with atoi() and atof().