According to MSDN, Median is not available as an aggregate function in Transact-SQL. However, I would like to find out whether it is possible to create this functionality (using the Create Aggregate function, user defined function, or some other method).
What would be the best way (if possible) to do this - allow for the calculation of a median value (assuming a numeric data type) in an aggregate query?
If you're using SQL 2005 or better this is a nice, simple-ish median calculation for a single column in a table:
SELECT
(
(SELECT MAX(Score) FROM
(SELECT TOP 50 PERCENT Score FROM Posts ORDER BY Score) AS BottomHalf)
+
(SELECT MIN(Score) FROM
(SELECT TOP 50 PERCENT Score FROM Posts ORDER BY Score DESC) AS TopHalf)
) / 2 AS Median
2019 UPDATE: In the 10 years since I wrote this answer, more solutions have been uncovered that may yield better results. Also, SQL Server releases since then (especially SQL 2012) have introduced new T-SQL features that can be used to calculate medians. SQL Server releases have also improved its query optimizer which may affect perf of various median solutions. Net-net, my original 2009 post is still OK but there may be better solutions on for modern SQL Server apps. Take a look at this article from 2012 which is a great resource: https://sqlperformance.com/2012/08/t-sql-queries/median
This article found the following pattern to be much, much faster than all other alternatives, at least on the simple schema they tested. This solution was 373x faster (!!!) than the slowest (PERCENTILE_CONT) solution tested. Note that this trick requires two separate queries which may not be practical in all cases. It also requires SQL 2012 or later.
DECLARE #c BIGINT = (SELECT COUNT(*) FROM dbo.EvenRows);
SELECT AVG(1.0 * val)
FROM (
SELECT val FROM dbo.EvenRows
ORDER BY val
OFFSET (#c - 1) / 2 ROWS
FETCH NEXT 1 + (1 - #c % 2) ROWS ONLY
) AS x;
Of course, just because one test on one schema in 2012 yielded great results, your mileage may vary, especially if you're on SQL Server 2014 or later. If perf is important for your median calculation, I'd strongly suggest trying and perf-testing several of the options recommended in that article to make sure that you've found the best one for your schema.
I'd also be especially careful using the (new in SQL Server 2012) function PERCENTILE_CONT that's recommended in one of the other answers to this question, because the article linked above found this built-in function to be 373x slower than the fastest solution. It's possible that this disparity has been improved in the 7 years since, but personally I wouldn't use this function on a large table until I verified its performance vs. other solutions.
ORIGINAL 2009 POST IS BELOW:
There are lots of ways to do this, with dramatically varying performance. Here's one particularly well-optimized solution, from Medians, ROW_NUMBERs, and performance. This is a particularly optimal solution when it comes to actual I/Os generated during execution – it looks more costly than other solutions, but it is actually much faster.
That page also contains a discussion of other solutions and performance testing details. Note the use of a unique column as a disambiguator in case there are multiple rows with the same value of the median column.
As with all database performance scenarios, always try to test a solution out with real data on real hardware – you never know when a change to SQL Server's optimizer or a peculiarity in your environment will make a normally-speedy solution slower.
SELECT
CustomerId,
AVG(TotalDue)
FROM
(
SELECT
CustomerId,
TotalDue,
-- SalesOrderId in the ORDER BY is a disambiguator to break ties
ROW_NUMBER() OVER (
PARTITION BY CustomerId
ORDER BY TotalDue ASC, SalesOrderId ASC) AS RowAsc,
ROW_NUMBER() OVER (
PARTITION BY CustomerId
ORDER BY TotalDue DESC, SalesOrderId DESC) AS RowDesc
FROM Sales.SalesOrderHeader SOH
) x
WHERE
RowAsc IN (RowDesc, RowDesc - 1, RowDesc + 1)
GROUP BY CustomerId
ORDER BY CustomerId;
In SQL Server 2012 you should use PERCENTILE_CONT:
SELECT SalesOrderID, OrderQty,
PERCENTILE_CONT(0.5)
WITHIN GROUP (ORDER BY OrderQty)
OVER (PARTITION BY SalesOrderID) AS MedianCont
FROM Sales.SalesOrderDetail
WHERE SalesOrderID IN (43670, 43669, 43667, 43663)
ORDER BY SalesOrderID DESC
See also : http://blog.sqlauthority.com/2011/11/20/sql-server-introduction-to-percentile_cont-analytic-functions-introduced-in-sql-server-2012/
My original quick answer was:
select max(my_column) as [my_column], quartile
from (select my_column, ntile(4) over (order by my_column) as [quartile]
from my_table) i
--where quartile = 2
group by quartile
This will give you the median and interquartile range in one fell swoop. If you really only want one row that is the median then uncomment the where clause.
When you stick that into an explain plan, 60% of the work is sorting the data which is unavoidable when calculating position dependent statistics like this.
I've amended the answer to follow the excellent suggestion from Robert Ševčík-Robajz in the comments below:
;with PartitionedData as
(select my_column, ntile(10) over (order by my_column) as [percentile]
from my_table),
MinimaAndMaxima as
(select min(my_column) as [low], max(my_column) as [high], percentile
from PartitionedData
group by percentile)
select
case
when b.percentile = 10 then cast(b.high as decimal(18,2))
else cast((a.low + b.high) as decimal(18,2)) / 2
end as [value], --b.high, a.low,
b.percentile
from MinimaAndMaxima a
join MinimaAndMaxima b on (a.percentile -1 = b.percentile) or (a.percentile = 10 and b.percentile = 10)
--where b.percentile = 5
This should calculate the correct median and percentile values when you have an even number of data items. Again, uncomment the final where clause if you only want the median and not the entire percentile distribution.
Even better:
SELECT #Median = AVG(1.0 * val)
FROM
(
SELECT o.val, rn = ROW_NUMBER() OVER (ORDER BY o.val), c.c
FROM dbo.EvenRows AS o
CROSS JOIN (SELECT c = COUNT(*) FROM dbo.EvenRows) AS c
) AS x
WHERE rn IN ((c + 1)/2, (c + 2)/2);
From the master Himself, Itzik Ben-Gan!
MS SQL Server 2012 (and later) has the PERCENTILE_DISC function which computes a specific percentile for sorted values. PERCENTILE_DISC (0.5) will compute the median - https://msdn.microsoft.com/en-us/library/hh231327.aspx
Simple, fast, accurate
SELECT x.Amount
FROM (SELECT amount,
Count(1) OVER (partition BY 'A') AS TotalRows,
Row_number() OVER (ORDER BY Amount ASC) AS AmountOrder
FROM facttransaction ft) x
WHERE x.AmountOrder = Round(x.TotalRows / 2.0, 0)
If you want to use the Create Aggregate function in SQL Server, this is how to do it. Doing it this way has the benefit of being able to write clean queries. Note this this process could be adapted to calculate a Percentile value fairly easily.
Create a new Visual Studio project and set the target framework to .NET 3.5 (this is for SQL 2008, it may be different in SQL 2012). Then create a class file and put in the following code, or c# equivalent:
Imports Microsoft.SqlServer.Server
Imports System.Data.SqlTypes
Imports System.IO
<Serializable>
<SqlUserDefinedAggregate(Format.UserDefined, IsInvariantToNulls:=True, IsInvariantToDuplicates:=False, _
IsInvariantToOrder:=True, MaxByteSize:=-1, IsNullIfEmpty:=True)>
Public Class Median
Implements IBinarySerialize
Private _items As List(Of Decimal)
Public Sub Init()
_items = New List(Of Decimal)()
End Sub
Public Sub Accumulate(value As SqlDecimal)
If Not value.IsNull Then
_items.Add(value.Value)
End If
End Sub
Public Sub Merge(other As Median)
If other._items IsNot Nothing Then
_items.AddRange(other._items)
End If
End Sub
Public Function Terminate() As SqlDecimal
If _items.Count <> 0 Then
Dim result As Decimal
_items = _items.OrderBy(Function(i) i).ToList()
If _items.Count Mod 2 = 0 Then
result = ((_items((_items.Count / 2) - 1)) + (_items(_items.Count / 2))) / 2#
Else
result = _items((_items.Count - 1) / 2)
End If
Return New SqlDecimal(result)
Else
Return New SqlDecimal()
End If
End Function
Public Sub Read(r As BinaryReader) Implements IBinarySerialize.Read
'deserialize it from a string
Dim list = r.ReadString()
_items = New List(Of Decimal)
For Each value In list.Split(","c)
Dim number As Decimal
If Decimal.TryParse(value, number) Then
_items.Add(number)
End If
Next
End Sub
Public Sub Write(w As BinaryWriter) Implements IBinarySerialize.Write
'serialize the list to a string
Dim list = ""
For Each item In _items
If list <> "" Then
list += ","
End If
list += item.ToString()
Next
w.Write(list)
End Sub
End Class
Then compile it and copy the DLL and PDB file to your SQL Server machine and run the following command in SQL Server:
CREATE ASSEMBLY CustomAggregate FROM '{path to your DLL}'
WITH PERMISSION_SET=SAFE;
GO
CREATE AGGREGATE Median(#value decimal(9, 3))
RETURNS decimal(9, 3)
EXTERNAL NAME [CustomAggregate].[{namespace of your DLL}.Median];
GO
You can then write a query to calculate the median like this:
SELECT dbo.Median(Field) FROM Table
I just came across this page while looking for a set based solution to median. After looking at some of the solutions here, I came up with the following. Hope is helps/works.
DECLARE #test TABLE(
i int identity(1,1),
id int,
score float
)
INSERT INTO #test (id,score) VALUES (1,10)
INSERT INTO #test (id,score) VALUES (1,11)
INSERT INTO #test (id,score) VALUES (1,15)
INSERT INTO #test (id,score) VALUES (1,19)
INSERT INTO #test (id,score) VALUES (1,20)
INSERT INTO #test (id,score) VALUES (2,20)
INSERT INTO #test (id,score) VALUES (2,21)
INSERT INTO #test (id,score) VALUES (2,25)
INSERT INTO #test (id,score) VALUES (2,29)
INSERT INTO #test (id,score) VALUES (2,30)
INSERT INTO #test (id,score) VALUES (3,20)
INSERT INTO #test (id,score) VALUES (3,21)
INSERT INTO #test (id,score) VALUES (3,25)
INSERT INTO #test (id,score) VALUES (3,29)
DECLARE #counts TABLE(
id int,
cnt int
)
INSERT INTO #counts (
id,
cnt
)
SELECT
id,
COUNT(*)
FROM
#test
GROUP BY
id
SELECT
drv.id,
drv.start,
AVG(t.score)
FROM
(
SELECT
MIN(t.i)-1 AS start,
t.id
FROM
#test t
GROUP BY
t.id
) drv
INNER JOIN #test t ON drv.id = t.id
INNER JOIN #counts c ON t.id = c.id
WHERE
t.i = ((c.cnt+1)/2)+drv.start
OR (
t.i = (((c.cnt+1)%2) * ((c.cnt+2)/2))+drv.start
AND ((c.cnt+1)%2) * ((c.cnt+2)/2) <> 0
)
GROUP BY
drv.id,
drv.start
The following query returns the median from a list of values in one column. It cannot be used as or along with an aggregate function, but you can still use it as a sub-query with a WHERE clause in the inner select.
SQL Server 2005+:
SELECT TOP 1 value from
(
SELECT TOP 50 PERCENT value
FROM table_name
ORDER BY value
)for_median
ORDER BY value DESC
Although Justin grant's solution appears solid I found that when you have a number of duplicate values within a given partition key the row numbers for the ASC duplicate values end up out of sequence so they do not properly align.
Here is a fragment from my result:
KEY VALUE ROWA ROWD
13 2 22 182
13 1 6 183
13 1 7 184
13 1 8 185
13 1 9 186
13 1 10 187
13 1 11 188
13 1 12 189
13 0 1 190
13 0 2 191
13 0 3 192
13 0 4 193
13 0 5 194
I used Justin's code as the basis for this solution. Although not as efficient given the use of multiple derived tables it does resolve the row ordering problem I encountered. Any improvements would be welcome as I am not that experienced in T-SQL.
SELECT PKEY, cast(AVG(VALUE)as decimal(5,2)) as MEDIANVALUE
FROM
(
SELECT PKEY,VALUE,ROWA,ROWD,
'FLAG' = (CASE WHEN ROWA IN (ROWD,ROWD-1,ROWD+1) THEN 1 ELSE 0 END)
FROM
(
SELECT
PKEY,
cast(VALUE as decimal(5,2)) as VALUE,
ROWA,
ROW_NUMBER() OVER (PARTITION BY PKEY ORDER BY ROWA DESC) as ROWD
FROM
(
SELECT
PKEY,
VALUE,
ROW_NUMBER() OVER (PARTITION BY PKEY ORDER BY VALUE ASC,PKEY ASC ) as ROWA
FROM [MTEST]
)T1
)T2
)T3
WHERE FLAG = '1'
GROUP BY PKEY
ORDER BY PKEY
In a UDF, write:
Select Top 1 medianSortColumn from Table T
Where (Select Count(*) from Table
Where MedianSortColumn <
(Select Count(*) From Table) / 2)
Order By medianSortColumn
Justin's example above is very good. But that Primary key need should be stated very clearly. I have seen that code in the wild without the key and the results are bad.
The complaint I get about the Percentile_Cont is that it wont give you an actual value from the dataset.
To get to a "median" that is an actual value from the dataset use Percentile_Disc.
SELECT SalesOrderID, OrderQty,
PERCENTILE_DISC(0.5)
WITHIN GROUP (ORDER BY OrderQty)
OVER (PARTITION BY SalesOrderID) AS MedianCont
FROM Sales.SalesOrderDetail
WHERE SalesOrderID IN (43670, 43669, 43667, 43663)
ORDER BY SalesOrderID DESC
Using a single statement - One way is to use ROW_NUMBER(), COUNT() window function and filter the sub-query. Here is to find the median salary:
SELECT AVG(e_salary)
FROM
(SELECT
ROW_NUMBER() OVER(ORDER BY e_salary) as row_no,
e_salary,
(COUNT(*) OVER()+1)*0.5 AS row_half
FROM Employee) t
WHERE row_no IN (FLOOR(row_half),CEILING(row_half))
I have seen similar solutions over the net using FLOOR and CEILING but tried to use a single statement. (edited)
Median Finding
This is the simplest method to find the median of an attribute.
Select round(S.salary,4) median from employee S
where (select count(salary) from station
where salary < S.salary ) = (select count(salary) from station
where salary > S.salary)
See other solutions for median calculation in SQL here:
"Simple way to calculate median with MySQL" (the solutions are mostly vendor-independent).
Building on Jeff Atwood's answer above here it is with GROUP BY and a correlated subquery to get the median for each group.
SELECT TestID,
(
(SELECT MAX(Score) FROM
(SELECT TOP 50 PERCENT Score FROM Posts WHERE TestID = Posts_parent.TestID ORDER BY Score) AS BottomHalf)
+
(SELECT MIN(Score) FROM
(SELECT TOP 50 PERCENT Score FROM Posts WHERE TestID = Posts_parent.TestID ORDER BY Score DESC) AS TopHalf)
) / 2 AS MedianScore,
AVG(Score) AS AvgScore, MIN(Score) AS MinScore, MAX(Score) AS MaxScore
FROM Posts_parent
GROUP BY Posts_parent.TestID
For a continuous variable/measure 'col1' from 'table1'
select col1
from
(select top 50 percent col1,
ROW_NUMBER() OVER(ORDER BY col1 ASC) AS Rowa,
ROW_NUMBER() OVER(ORDER BY col1 DESC) AS Rowd
from table1 ) tmp
where tmp.Rowa = tmp.Rowd
Frequently, we may need to calculate Median not just for the whole table, but for aggregates with respect to some ID. In other words, calculate median for each ID in our table, where each ID has many records. (based on the solution edited by #gdoron: good performance and works in many SQL)
SELECT our_id, AVG(1.0 * our_val) as Median
FROM
( SELECT our_id, our_val,
COUNT(*) OVER (PARTITION BY our_id) AS cnt,
ROW_NUMBER() OVER (PARTITION BY our_id ORDER BY our_val) AS rnk
FROM our_table
) AS x
WHERE rnk IN ((cnt + 1)/2, (cnt + 2)/2) GROUP BY our_id;
Hope it helps.
For large scale datasets, you can try this GIST:
https://gist.github.com/chrisknoll/1b38761ce8c5016ec5b2
It works by aggregating the distinct values you would find in your set (such as ages, or year of birth, etc.), and uses SQL window functions to locate any percentile position you specify in the query.
To get median value of salary from employee table
with cte as (select salary, ROW_NUMBER() over (order by salary asc) as num from employees)
select avg(salary) from cte where num in ((select (count(*)+1)/2 from employees), (select (count(*)+2)/2 from employees));
I wanted to work out a solution by myself, but my brain tripped and fell on the way. I think it works, but don't ask me to explain it in the morning. :P
DECLARE #table AS TABLE
(
Number int not null
);
insert into #table select 2;
insert into #table select 4;
insert into #table select 9;
insert into #table select 15;
insert into #table select 22;
insert into #table select 26;
insert into #table select 37;
insert into #table select 49;
DECLARE #Count AS INT
SELECT #Count = COUNT(*) FROM #table;
WITH MyResults(RowNo, Number) AS
(
SELECT RowNo, Number FROM
(SELECT ROW_NUMBER() OVER (ORDER BY Number) AS RowNo, Number FROM #table) AS Foo
)
SELECT AVG(Number) FROM MyResults WHERE RowNo = (#Count+1)/2 OR RowNo = ((#Count+1)%2) * ((#Count+2)/2)
--Create Temp Table to Store Results in
DECLARE #results AS TABLE
(
[Month] datetime not null
,[Median] int not null
);
--This variable will determine the date
DECLARE #IntDate as int
set #IntDate = -13
WHILE (#IntDate < 0)
BEGIN
--Create Temp Table
DECLARE #table AS TABLE
(
[Rank] int not null
,[Days Open] int not null
);
--Insert records into Temp Table
insert into #table
SELECT
rank() OVER (ORDER BY DATEADD(mm, DATEDIFF(mm, 0, DATEADD(ss, SVR.close_date, '1970')), 0), DATEDIFF(day,DATEADD(ss, SVR.open_date, '1970'),DATEADD(ss, SVR.close_date, '1970')),[SVR].[ref_num]) as [Rank]
,DATEDIFF(day,DATEADD(ss, SVR.open_date, '1970'),DATEADD(ss, SVR.close_date, '1970')) as [Days Open]
FROM
mdbrpt.dbo.View_Request SVR
LEFT OUTER JOIN dbo.dtv_apps_systems vapp
on SVR.category = vapp.persid
LEFT OUTER JOIN dbo.prob_ctg pctg
on SVR.category = pctg.persid
Left Outer Join [mdbrpt].[dbo].[rootcause] as [Root Cause]
on [SVR].[rootcause]=[Root Cause].[id]
Left Outer Join [mdbrpt].[dbo].[cr_stat] as [Status]
on [SVR].[status]=[Status].[code]
LEFT OUTER JOIN [mdbrpt].[dbo].[net_res] as [net]
on [net].[id]=SVR.[affected_rc]
WHERE
SVR.Type IN ('P')
AND
SVR.close_date IS NOT NULL
AND
[Status].[SYM] = 'Closed'
AND
SVR.parent is null
AND
[Root Cause].[sym] in ( 'RC - Application','RC - Hardware', 'RC - Operational', 'RC - Unknown')
AND
(
[vapp].[appl_name] in ('3PI','Billing Rpts/Files','Collabrent','Reports','STMS','STMS 2','Telco','Comergent','OOM','C3-BAU','C3-DD','DIRECTV','DIRECTV Sales','DIRECTV Self Care','Dealer Website','EI Servlet','Enterprise Integration','ET','ICAN','ODS','SB-SCM','SeeBeyond','Digital Dashboard','IVR','OMS','Order Services','Retail Services','OSCAR','SAP','CTI','RIO','RIO Call Center','RIO Field Services','FSS-RIO3','TAOS','TCS')
OR
pctg.sym in ('Systems.Release Health Dashboard.Problem','DTV QA Test.Enterprise Release.Deferred Defect Log')
AND
[Net].[nr_desc] in ('3PI','Billing Rpts/Files','Collabrent','Reports','STMS','STMS 2','Telco','Comergent','OOM','C3-BAU','C3-DD','DIRECTV','DIRECTV Sales','DIRECTV Self Care','Dealer Website','EI Servlet','Enterprise Integration','ET','ICAN','ODS','SB-SCM','SeeBeyond','Digital Dashboard','IVR','OMS','Order Services','Retail Services','OSCAR','SAP','CTI','RIO','RIO Call Center','RIO Field Services','FSS-RIO3','TAOS','TCS')
)
AND
DATEADD(mm, DATEDIFF(mm, 0, DATEADD(ss, SVR.close_date, '1970')), 0) = DATEADD(mm, DATEDIFF(mm,0,DATEADD(mm,#IntDate,getdate())), 0)
ORDER BY [Days Open]
DECLARE #Count AS INT
SELECT #Count = COUNT(*) FROM #table;
WITH MyResults(RowNo, [Days Open]) AS
(
SELECT RowNo, [Days Open] FROM
(SELECT ROW_NUMBER() OVER (ORDER BY [Days Open]) AS RowNo, [Days Open] FROM #table) AS Foo
)
insert into #results
SELECT
DATEADD(mm, DATEDIFF(mm,0,DATEADD(mm,#IntDate,getdate())), 0) as [Month]
,AVG([Days Open])as [Median] FROM MyResults WHERE RowNo = (#Count+1)/2 OR RowNo = ((#Count+1)%2) * ((#Count+2)/2)
set #IntDate = #IntDate+1
DELETE FROM #table
END
select *
from #results
order by [Month]
This works with SQL 2000:
DECLARE #testTable TABLE
(
VALUE INT
)
--INSERT INTO #testTable -- Even Test
--SELECT 3 UNION ALL
--SELECT 5 UNION ALL
--SELECT 7 UNION ALL
--SELECT 12 UNION ALL
--SELECT 13 UNION ALL
--SELECT 14 UNION ALL
--SELECT 21 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 29 UNION ALL
--SELECT 40 UNION ALL
--SELECT 56
--
--INSERT INTO #testTable -- Odd Test
--SELECT 3 UNION ALL
--SELECT 5 UNION ALL
--SELECT 7 UNION ALL
--SELECT 12 UNION ALL
--SELECT 13 UNION ALL
--SELECT 14 UNION ALL
--SELECT 21 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 23 UNION ALL
--SELECT 29 UNION ALL
--SELECT 39 UNION ALL
--SELECT 40 UNION ALL
--SELECT 56
DECLARE #RowAsc TABLE
(
ID INT IDENTITY,
Amount INT
)
INSERT INTO #RowAsc
SELECT VALUE
FROM #testTable
ORDER BY VALUE ASC
SELECT AVG(amount)
FROM #RowAsc ra
WHERE ra.id IN
(
SELECT ID
FROM #RowAsc
WHERE ra.id -
(
SELECT MAX(id) / 2.0
FROM #RowAsc
) BETWEEN 0 AND 1
)
For newbies like myself who are learning the very basics, I personally find this example easier to follow, as it is easier to understand exactly what's happening and where median values are coming from...
select
( max(a.[Value1]) + min(a.[Value1]) ) / 2 as [Median Value1]
,( max(a.[Value2]) + min(a.[Value2]) ) / 2 as [Median Value2]
from (select
datediff(dd,startdate,enddate) as [Value1]
,xxxxxxxxxxxxxx as [Value2]
from dbo.table1
)a
In absolute awe of some of the codes above though!!!
This is as simple an answer as I could come up with. Worked well with my data. If you want to exclude certain values just add a where clause to the inner select.
SELECT TOP 1
ValueField AS MedianValue
FROM
(SELECT TOP(SELECT COUNT(1)/2 FROM tTABLE)
ValueField
FROM
tTABLE
ORDER BY
ValueField) A
ORDER BY
ValueField DESC
The following solution works under these assumptions:
No duplicate values
No NULLs
Code:
IF OBJECT_ID('dbo.R', 'U') IS NOT NULL
DROP TABLE dbo.R
CREATE TABLE R (
A FLOAT NOT NULL);
INSERT INTO R VALUES (1);
INSERT INTO R VALUES (2);
INSERT INTO R VALUES (3);
INSERT INTO R VALUES (4);
INSERT INTO R VALUES (5);
INSERT INTO R VALUES (6);
-- Returns Median(R)
select SUM(A) / CAST(COUNT(A) AS FLOAT)
from R R1
where ((select count(A) from R R2 where R1.A > R2.A) =
(select count(A) from R R2 where R1.A < R2.A)) OR
((select count(A) from R R2 where R1.A > R2.A) + 1 =
(select count(A) from R R2 where R1.A < R2.A)) OR
((select count(A) from R R2 where R1.A > R2.A) =
(select count(A) from R R2 where R1.A < R2.A) + 1) ;
DECLARE #Obs int
DECLARE #RowAsc table
(
ID INT IDENTITY,
Observation FLOAT
)
INSERT INTO #RowAsc
SELECT Observations FROM MyTable
ORDER BY 1
SELECT #Obs=COUNT(*)/2 FROM #RowAsc
SELECT Observation AS Median FROM #RowAsc WHERE ID=#Obs
I try with several alternatives, but due my data records has repeated values, the ROW_NUMBER versions seems are not a choice for me. So here the query I used (a version with NTILE):
SELECT distinct
CustomerId,
(
MAX(CASE WHEN Percent50_Asc=1 THEN TotalDue END) OVER (PARTITION BY CustomerId) +
MIN(CASE WHEN Percent50_desc=1 THEN TotalDue END) OVER (PARTITION BY CustomerId)
)/2 MEDIAN
FROM
(
SELECT
CustomerId,
TotalDue,
NTILE(2) OVER (
PARTITION BY CustomerId
ORDER BY TotalDue ASC) AS Percent50_Asc,
NTILE(2) OVER (
PARTITION BY CustomerId
ORDER BY TotalDue DESC) AS Percent50_desc
FROM Sales.SalesOrderHeader SOH
) x
ORDER BY CustomerId;
For your question, Jeff Atwood had already given the simple and effective solution. But, if you are looking for some alternative approach to calculate the median, below SQL code will help you.
create table employees(salary int);
insert into employees values(8); insert into employees values(23); insert into employees values(45); insert into employees values(123); insert into employees values(93); insert into employees values(2342); insert into employees values(2238);
select * from employees;
declare #odd_even int; declare #cnt int; declare #middle_no int;
set #cnt=(select count(*) from employees); set #middle_no=(#cnt/2)+1; select #odd_even=case when (#cnt%2=0) THEN -1 ELse 0 END ;
select AVG(tbl.salary) from (select salary,ROW_NUMBER() over (order by salary) as rno from employees group by salary) tbl where tbl.rno=#middle_no or tbl.rno=#middle_no+#odd_even;
If you are looking to calculate median in MySQL, this github link will be useful.
I am trying to have a running average column in the SELECT statement based on a column from the n previous rows in the same SELECT statement. The average I need is based on the n previous rows in the resultset.
Let me explain
Id Number Average
1 1 NULL
2 3 NULL
3 2 NULL
4 4 2 <----- Average of (1, 3, 2),Numbers from previous 3 rows
5 6 3 <----- Average of (3, 2, 4),Numbers from previous 3 rows
. . .
. . .
The first 3 rows of the Average column are null because there are no previous rows. The row 4 in the Average column shows the average of the Number column from the previous 3 rows.
I need some help trying to construct a SQL Select statement that will do this.
This should do it:
--Test Data
CREATE TABLE RowsToAverage
(
ID int NOT NULL,
Number int NOT NULL
)
INSERT RowsToAverage(ID, Number)
SELECT 1, 1
UNION ALL
SELECT 2, 3
UNION ALL
SELECT 3, 2
UNION ALL
SELECT 4, 4
UNION ALL
SELECT 5, 6
UNION ALL
SELECT 6, 8
UNION ALL
SELECT 7, 10
--The query
;WITH NumberedRows
AS
(
SELECT rta.*, row_number() OVER (ORDER BY rta.ID ASC) AS RowNumber
FROM RowsToAverage rta
)
SELECT nr.ID, nr.Number,
CASE
WHEN nr.RowNumber <=3 THEN NULL
ELSE ( SELECT avg(Number)
FROM NumberedRows
WHERE RowNumber < nr.RowNumber
AND RowNumber >= nr.RowNumber - 3
)
END AS MovingAverage
FROM NumberedRows nr
Assuming that the Id column is sequential, here's a simplified query for a table named "MyTable":
SELECT
b.Id,
b.Number,
(
SELECT
AVG(a.Number)
FROM
MyTable a
WHERE
a.id >= (b.Id - 3)
AND a.id < b.Id
AND b.Id > 3
) as Average
FROM
MyTable b;
Edit: I missed the point that it should average the three previous records...
For a general running average, I think something like this would work:
SELECT
id, number,
SUM(number) OVER (ORDER BY ID) /
ROW_NUMBER() OVER (ORDER BY ID) AS [RunningAverage]
FROM myTable
ORDER BY ID
A simple self join would seem to perform much better than a row referencing subquery
Generate 10k rows of test data:
drop table test10k
create table test10k (Id int, Number int, constraint test10k_cpk primary key clustered (id))
;WITH digits AS (
SELECT 0 as Number
UNION SELECT 1
UNION SELECT 2
UNION SELECT 3
UNION SELECT 4
UNION SELECT 5
UNION SELECT 6
UNION SELECT 7
UNION SELECT 8
UNION SELECT 9
)
,numbers as (
SELECT
(thousands.Number * 1000)
+ (hundreds.Number * 100)
+ (tens.Number * 10)
+ ones.Number AS Number
FROM digits AS ones
CROSS JOIN digits AS tens
CROSS JOIN digits AS hundreds
CROSS JOIN digits AS thousands
)
insert test10k (Id, Number)
select Number, Number
from numbers
I would pull the special case of the first 3 rows out of the main query, you can UNION ALL those back in if you really want it in the row set. Self join query:
;WITH NumberedRows
AS
(
SELECT rta.*, row_number() OVER (ORDER BY rta.ID ASC) AS RowNumber
FROM test10k rta
)
SELECT nr.ID, nr.Number,
avg(trailing.Number) as MovingAverage
FROM NumberedRows nr
join NumberedRows as trailing on trailing.RowNumber between nr.RowNumber-3 and nr.RowNumber-1
where nr.Number > 3
group by nr.id, nr.Number
On my machine this takes about 10 seconds, the subquery approach that Aaron Alton demonstrated takes about 45 seconds (after I changed it to reflect my test source table) :
;WITH NumberedRows
AS
(
SELECT rta.*, row_number() OVER (ORDER BY rta.ID ASC) AS RowNumber
FROM test10k rta
)
SELECT nr.ID, nr.Number,
CASE
WHEN nr.RowNumber <=3 THEN NULL
ELSE ( SELECT avg(Number)
FROM NumberedRows
WHERE RowNumber < nr.RowNumber
AND RowNumber >= nr.RowNumber - 3
)
END AS MovingAverage
FROM NumberedRows nr
If you do a SET STATISTICS PROFILE ON, you can see the self join has 10k executes on the table spool. The subquery has 10k executes on the filter, aggregate, and other steps.
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
Check out some solutions here. I'm sure that you could adapt one of them easily enough.
If you want this to be truly performant, and arn't afraid to dig into a seldom-used area of SQL Server, you should look into writing a custom aggregate function. SQL Server 2005 and 2008 brought CLR integration to the table, including the ability to write user aggregate functions. A custom running total aggregate would be the most efficient way to calculate a running average like this, by far.
Alternatively you can denormalize and store precalculated running values. Described here:
http://sqlblog.com/blogs/alexander_kuznetsov/archive/2009/01/23/denormalizing-to-enforce-business-rules-running-totals.aspx
Performance of selects is as fast as it goes. Of course, modifications are slower.
I want to select the last 5 records from a table in SQL Server without arranging the table in ascending or descending order.
This is just about the most bizarre query I've ever written, but I'm pretty sure it gets the "last 5" rows from a table without ordering:
select *
from issues
where issueid not in (
select top (
(select count(*) from issues) - 5
) issueid
from issues
)
Note that this makes use of SQL Server 2005's ability to pass a value into the "top" clause - it doesn't work on SQL Server 2000.
Suppose you have an index on id, this will be lightning fast:
SELECT * FROM [MyTable] WHERE [id] > (SELECT MAX([id]) - 5 FROM [MyTable])
The way your question is phrased makes it sound like you think you have to physically resort the data in the table in order to get it back in the order you want. If so, this is not the case, the ORDER BY clause exists for this purpose. The physical order in which the records are stored remains unchanged when using ORDER BY. The records are sorted in memory (or in temporary disk space) before they are returned.
Note that the order that records get returned is not guaranteed without using an ORDER BY clause. So, while any of the the suggestions here may work, there is no reason to think they will continue to work, nor can you prove that they work in all cases with your current database. This is by design - I am assuming it is to give the database engine the freedom do as it will with the records in order to obtain best performance in the case where there is no explicit order specified.
Assuming you wanted the last 5 records sorted by the field Name in ascending order, you could do something like this, which should work in either SQL 2000 or 2005:
select Name
from (
select top 5 Name
from MyTable
order by Name desc
) a
order by Name asc
You need to count number of rows inside table ( say we have 12 rows )
then subtract 5 rows from them ( we are now in 7 )
select * where index_column > 7
select * from users
where user_id >
( (select COUNT(*) from users) - 5)
you can order them ASC or DESC
But when using this code
select TOP 5 from users order by user_id DESC
it will not be ordered easily.
select * from table limit 5 offset (select count(*) from table) - 5;
Without an order, this is impossible. What defines the "bottom"? The following will select 5 rows according to how they are stored in the database.
SELECT TOP 5 * FROM [TableName]
Well, the "last five rows" are actually the last five rows depending on your clustered index. Your clustered index, by definition, is the way that he rows are ordered. So you really can't get the "last five rows" without some order. You can, however, get the last five rows as it pertains to the clustered index.
SELECT TOP 5 * FROM MyTable
ORDER BY MyCLusteredIndexColumn1, MyCLusteredIndexColumnq, ..., MyCLusteredIndexColumnN DESC
Search 5 records from last records you can use this,
SELECT *
FROM Table Name
WHERE ID <= IDENT_CURRENT('Table Name')
AND ID >= IDENT_CURRENT('Table Name') - 5
If you know how many rows there will be in total you can use the ROW_NUMBER() function.
Here's an examble from MSDN (http://msdn.microsoft.com/en-us/library/ms186734.aspx)
USE AdventureWorks;
GO
WITH OrderedOrders AS
(
SELECT SalesOrderID, OrderDate,
ROW_NUMBER() OVER (ORDER BY OrderDate) AS 'RowNumber'
FROM Sales.SalesOrderHeader
)
SELECT *
FROM OrderedOrders
WHERE RowNumber BETWEEN 50 AND 60;
In SQL Server 2012 you can do this :
Declare #Count1 int ;
Select #Count1 = Count(*)
FROM [Log] AS L
SELECT
*
FROM [Log] AS L
ORDER BY L.id
OFFSET #Count - 5 ROWS
FETCH NEXT 5 ROWS ONLY;
Try this, if you don't have a primary key or identical column:
select [Stu_Id],[Student_Name] ,[City] ,[Registered],
RowNum = row_number() OVER (ORDER BY (SELECT 0))
from student
ORDER BY RowNum desc
You can retrieve them from memory.
So first you get the rows in a DataSet, and then get the last 5 out of the DataSet.
There is a handy trick that works in some databases for ordering in database order,
SELECT * FROM TableName ORDER BY true
Apparently, this can work in conjunction with any of the other suggestions posted here to leave the results in "order they came out of the database" order, which in some databases, is the order they were last modified in.
select *
from table
order by empno(primary key) desc
fetch first 5 rows only
Last 5 rows retrieve in mysql
This query working perfectly
SELECT * FROM (SELECT * FROM recharge ORDER BY sno DESC LIMIT 5)sub ORDER BY sno ASC
or
select sno from(select sno from recharge order by sno desc limit 5) as t where t.sno order by t.sno asc
When number of rows in table is less than 5 the answers of Matt Hamilton and msuvajac is Incorrect.
Because a TOP N rowcount value may not be negative.
A great example can be found Here.
i am using this code:
select * from tweets where placeID = '$placeID' and id > (
(select count(*) from tweets where placeID = '$placeID')-2)
In SQL Server, it does not seem possible without using ordering in the query.
This is what I have used.
SELECT *
FROM
(
SELECT TOP 5 *
FROM [MyTable]
ORDER BY Id DESC /*Primary Key*/
) AS T
ORDER BY T.Id ASC; /*Primary Key*/
DECLARE #MYVAR NVARCHAR(100)
DECLARE #step int
SET #step = 0;
DECLARE MYTESTCURSOR CURSOR
DYNAMIC
FOR
SELECT col FROM [dbo].[table]
OPEN MYTESTCURSOR
FETCH LAST FROM MYTESTCURSOR INTO #MYVAR
print #MYVAR;
WHILE #step < 10
BEGIN
FETCH PRIOR FROM MYTESTCURSOR INTO #MYVAR
print #MYVAR;
SET #step = #step + 1;
END
CLOSE MYTESTCURSOR
DEALLOCATE MYTESTCURSOR
Thanks to #Apps Tawale , Based on his answer, here's a bit of another (my) version,
To select last 5 records without an identity column,
select top 5 *,
RowNum = row_number() OVER (ORDER BY (SELECT 0))
from [dbo].[ViewEmployeeMaster]
ORDER BY RowNum desc
Nevertheless, it has an order by, but on RowNum :)
Note(1): The above query will reverse the order of what we get when we run the main select query.
So to maintain the order, we can slightly go like:
select *, RowNum2 = row_number() OVER (ORDER BY (SELECT 0))
from (
select top 5 *, RowNum = row_number() OVER (ORDER BY (SELECT 0))
from [dbo].[ViewEmployeeMaster]
ORDER BY RowNum desc
) as t1
order by RowNum2 desc
Note(2): Without an identity column, the query takes a bit of time in case of large data
Get the count of that table
select count(*) from TABLE
select top count * from TABLE where 'primary key row' NOT IN (select top (count-5) 'primary key row' from TABLE)
If you do not want to arrange the table in ascending or descending order. Use this.
select * from table limit 5 offset (select count(*) from table) - 5;