What is the Windows batch equivalent of the Linux shell command echo -n which suppresses the newline at the end of the output?
The idea is to write on the same line inside a loop.
Using set and the /p parameter you can echo without newline:
C:\> echo Hello World
Hello World
C:\> echo|set /p="Hello World"
Hello World
C:\>
Source
Using: echo | set /p= or <NUL set /p= will both work to suppress the newline.
However, this can be very dangerous when writing more advanced scripts when checking the ERRORLEVEL becomes important as setting set /p= without specifying a variable name will set the ERRORLEVEL to 1.
A better approach would be to just use a dummy variable name like so:
echo | set /p dummyName=Hello World
This will produce exactly what you want without any sneaky stuff going on in the background as I had to find out the hard way, but this only works with the piped version; <NUL set /p dummyName=Hello will still raise the ERRORLEVEL to 1.
The simple SET /P method has limitations that vary slightly between Windows versions.
Leading quotes may be stripped
Leading white space may be stripped
Leading = causes a syntax error.
See http://www.dostips.com/forum/viewtopic.php?f=3&t=4209 for more information.
jeb posted a clever solution that solves most of the problems at Output text without linefeed, even with leading space or = I've refined the method so that it can safely print absolutely any valid batch string without the new line, on any version of Windows from XP onward. Note that the :writeInitialize method contains a string literal that may not post well to the site. A remark is included that describes what the character sequence should be.
The :write and :writeVar methods are optimized such that only strings containing troublesome leading characters are written using my modified version of jeb's COPY method. Non-troublesome strings are written using the simpler and faster SET /P method.
#echo off
setlocal disableDelayedExpansion
call :writeInitialize
call :write "=hello"
call :write " world!%$write.sub%OK!"
echo(
setlocal enableDelayedExpansion
set lf=^
set "str= hello!lf!world^!!!$write.sub!hello!lf!world"
echo(
echo str=!str!
echo(
call :write "str="
call :writeVar str
echo(
exit /b
:write Str
::
:: Write the literal string Str to stdout without a terminating
:: carriage return or line feed. Enclosing quotes are stripped.
::
:: This routine works by calling :writeVar
::
setlocal disableDelayedExpansion
set "str=%~1"
call :writeVar str
exit /b
:writeVar StrVar
::
:: Writes the value of variable StrVar to stdout without a terminating
:: carriage return or line feed.
::
:: The routine relies on variables defined by :writeInitialize. If the
:: variables are not yet defined, then it calls :writeInitialize to
:: temporarily define them. Performance can be improved by explicitly
:: calling :writeInitialize once before the first call to :writeVar
::
if not defined %~1 exit /b
setlocal enableDelayedExpansion
if not defined $write.sub call :writeInitialize
set $write.special=1
if "!%~1:~0,1!" equ "^!" set "$write.special="
for /f delims^=^ eol^= %%A in ("!%~1:~0,1!") do (
if "%%A" neq "=" if "!$write.problemChars:%%A=!" equ "!$write.problemChars!" set "$write.special="
)
if not defined $write.special (
<nul set /p "=!%~1!"
exit /b
)
>"%$write.temp%_1.txt" (echo !str!!$write.sub!)
copy "%$write.temp%_1.txt" /a "%$write.temp%_2.txt" /b >nul
type "%$write.temp%_2.txt"
del "%$write.temp%_1.txt" "%$write.temp%_2.txt"
set "str2=!str:*%$write.sub%=%$write.sub%!"
if "!str2!" neq "!str!" <nul set /p "=!str2!"
exit /b
:writeInitialize
::
:: Defines 3 variables needed by the :write and :writeVar routines
::
:: $write.temp - specifies a base path for temporary files
::
:: $write.sub - contains the SUB character, also known as <CTRL-Z> or 0x1A
::
:: $write.problemChars - list of characters that cause problems for SET /P
:: <carriageReturn> <formFeed> <space> <tab> <0xFF> <equal> <quote>
:: Note that <lineFeed> and <equal> also causes problems, but are handled elsewhere
::
set "$write.temp=%temp%\writeTemp%random%"
copy nul "%$write.temp%.txt" /a >nul
for /f "usebackq" %%A in ("%$write.temp%.txt") do set "$write.sub=%%A"
del "%$write.temp%.txt"
for /f %%A in ('copy /z "%~f0" nul') do for /f %%B in ('cls') do (
set "$write.problemChars=%%A%%B ""
REM the characters after %%B above should be <space> <tab> <0xFF>
)
exit /b
As an addendum to #xmechanix's answer, I noticed through writing the contents to a file:
echo | set /p dummyName=Hello World > somefile.txt
That this will add an extra space at the end of the printed string, which can be inconvenient, specially since we're trying to avoid adding a new line (another whitespace character) to the end of the string.
Fortunately, quoting the string to be printed, i.e. using:
echo | set /p dummyName="Hello World" > somefile.txt
Will print the string without any newline or space character at the end.
A solution for the stripped white space in SET /P:
the trick is that backspace char which you can summon in the text editor EDIT for DOS. To create it in EDIT press ctrlP+ctrlH.
I would paste it here but this webpage can't display it. It's visible on Notepad though (it's werid, like a small black rectangle with a white circle in the center)
So you write this:
<nul set /p=.9 Hello everyone
The dot can be any char, it's only there to tell SET /P that the text starts there, before the spaces, and not at the "Hello".
The "9" is a representation of the backspace char that I can't display here. You have to put it instead of the 9, and it will delete the "." , after which you'll get this:
Hello Everyone
instead of:
Hello Everyone
I hope it helps
Here is another method, it uses Powershell Write-Host which has a -NoNewLine parameter, combine that with start /b and it offers the same functionality from batch.
NoNewLines.cmd
#ECHO OFF
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 1 - ';Write-Host -NoNewLine 'Result 2 - ';Write-Host -NoNewLine 'Result 3 - '"
PAUSE
Output
Result 1 - Result 2 - Result 3 - Press any key to continue . . .
This one below is slightly different, doesn't work exactly like the OP wants, but is interesting because each result overwrites the previous result emulating a counter.
#ECHO OFF
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 1 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 2 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 3 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 4 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 5 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 6 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 7 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 8 - '"
start /b /wait powershell.exe -command "Write-Host -NoNewLine 'Result 9 - '"
PAUSE
You can remove the newline using "tr" from gnuwin32 (coreutils package)
#echo off
set L=First line
echo %L% | tr -d "\r\n"
echo Second line
pause
By the way, if you are doing lots of scripting, gnuwin32 is a goldmine.
I made a function out of #arnep 's idea:
echo|set /p="Hello World"
here it is:
:SL (sameline)
echo|set /p=%1
exit /b
Use it with call :SL "Hello There"
I know this is nothing special but it took me so long to think of it I figured I'd post it here.
DIY cw.exe (console write) utility
If you don't find it out-of-the-box, off-the-shelf, you can DIY. With this cw utility you can use every kind of characters. At least, I'd like to think so. Please stress-test it and let me know.
Tools
All you need is .NET installed, which is very common nowadays.
Materials
Some characters typed/copy-pasted.
Steps
Create .bat file with the following content.
/* >nul 2>&1
#echo off
setlocal
set exe=cw
for /f "tokens=* delims=" %%v in ('dir /b /s /a:-d /o:-n "%SystemRoot%\Microsoft.NET\Framework\*csc.exe"') do set "csc=%%v"
"%csc%" -nologo -out:"%exe%.exe" "%~f0"
endlocal
exit /b %errorlevel%
*/
using System;
namespace cw {
class Program {
static void Main() {
var exe = Environment.GetCommandLineArgs()[0];
var rawCmd = Environment.CommandLine;
var line = rawCmd.Remove(rawCmd.IndexOf(exe),exe.Length).TrimStart('"');
line = line.Length < 2 ? "\r" : line.Substring(2) ;
Console.Write(line);
}
}
}
Run it.
Now you have a nice 4KB utility so you can delete the .bat.
Alternatively, you can insert this code as a subroutine in any batch, send the resulting .exe to %temp%, use it in your batch and delete it when you're done.
How to use
If you want write something without new line:
cw Whatever you want, even with "", but remember to escape ^|, ^^, ^&, etc. unless double-quoted, like in "| ^ &".
If you want a carriage return (going to the beginning of the line), run just
cw
So try this from command line:
for /l %a in (1,1,1000) do #(cw ^|&cw&cw /&cw&cw -&cw&cw \&cw)
From here
<nul set /p =Testing testing
and also to echo beginning with spaces use
echo.Message goes here
Maybe this is what your looking for, it's a old school script... :P
set nl=^& echo.
echo %nl%The%nl%new%nl%line%nl%is%nl%not%nl%apparent%nl%throughout%nl%text%nl%
echo only in prompt.
pause
or maybe your trying to replace a current line instead of writing to a new line?
you can experiment with this by removing the "%bs%" after the "." sign and also by spacing out the other "%bs%" after the "Example message".
for /f %%a in ('"prompt $H&for %%b in (1) do rem"') do set "bs=%%a"
<nul set /p=.%bs% Example message %bs%
pause
I find this really interesting because it uses a variable for a purpose other than what it is intended to do. as you can see the "%bs%" represents a backspace. The second "%bs%" uses the backspace to add spaces after the "Example message" to separate the "Pause command's output" without actually adding a visible character after the "Example message". However, this is also possible with a regular percentage sign.
Sample 1: This works and produces Exit code = 0. That is Good.
Note the "." , directly after echo.
C:\Users\phife.dog\gitrepos\1\repo_abc\scripts #
#echo.| set /p JUNK_VAR=This is a message displayed like Linux echo -n would display it ... & echo %ERRORLEVEL%
This is a message displayed like Linux echo -n would display it ... 0
Sample 2: This works but produces Exit code = 1. That is Bad.
Please note the lack of ".", after echo. That appears to be the difference.
C:\Users\phife.dog\gitrepos\1\repo_abc\scripts #
#echo | set /p JUNK_VAR=This is a message displayed like Linux echo -n would display it ... & echo %ERRORLEVEL%
This is a message displayed like Linux echo -n would display it ... 1
Inspired by the answers to this question, I made a simple counter batch script that keeps printing the progress value (0-100%) on the same line (overwritting the previous one). Maybe this will also be valuable to others looking for a similar solution.
Remark: The * are non-printable characters, these should be entered using [Alt + Numpad 0 + Numpad 8] key combination, which is the backspace character.
#ECHO OFF
FOR /L %%A in (0, 10, 100) DO (
ECHO|SET /P="****%%A%%"
CALL:Wait 1
)
GOTO:EOF
:Wait
SET /A "delay=%~1+1"
CALL PING 127.0.0.1 -n %delay% > NUL
GOTO:EOF
You can suppress the new line by using the set /p command. The set /p command does not recognize a space, for that you can use a dot and a backspace character to make it recognize it. You can also use a variable as a memory and store what you want to print in it, so that you can print the variable instead of the sentence. For example:
#echo off
setlocal enabledelayedexpansion
for /f %%a in ('"prompt $H & for %%b in (1) do rem"') do (set "bs=%%a")
cls
set "var=Hello World! :)"
set "x=0"
:loop
set "display=!var:~%x%,1!"
<nul set /p "print=.%bs%%display%"
ping -n 1 localhost >nul
set /a "x=%x% + 1"
if "!var:~%x%,1!" == "" goto end
goto loop
:end
echo.
pause
exit
In this way you can print anything without a new line. I have made the program to print the characters one by one, but you can use words too instead of characters by changing the loop.
In the above example I used "enabledelayedexpansion" so the set /p command does not recognize "!" character and prints a dot instead of that. I hope that you don't have the use of the exclamation mark "!" ;)
Use EchoX.EXE from the terrific "Shell Scripting Toolkit" by Bill Stewart
How to suppress the linefeed in a Windows Cmd script:
#Echo Off
Rem Print three Echos in one line of output
EchoX -n "Part 1 - "
EchoX -n "Part 2 - "
EchoX "Part 3"
Rem
gives:
Part 1 - Part 2 - Part 3
{empty line}
d:\Prompt>
The help for this usage is:
Usage: echox [-n] message
-n Do not skip to the next line.
message The text to be displayed.
The utility is smaller than 48K, and should live in your Path. More things it can do:- print text without moving to the next line- print text justified to the left, center, or right, within a certain width- print text with Tabs, Linefeeds, and Returns- print text in foreground and background colors
The Toolkit includes twelve more great scripting tricks.
The download page also hosts three other useful tool packages.
I found this simple one-line batch file called "EchoPart.bat" to be quite useful.
#echo | set /p=%*
I could then write something like the line below even on an interactive CMD line, or as part of a shortcut. It opens up a few new possibilities.
echopart "Hello, " & echopart "and then " & echo Goodbye
And if you're using it in batch files, the texts can be got from parameter variables instead of immutable strings. For instance:
#echopart Hello %* & #echo , how are you?
So that executing this line in "SayHello.bat" allows:
or even...
Have a play, and have fun!
I believe there's no such option. Alternatively you can try this
set text=Hello
set text=%text% world
echo %text%
Echo with preceding space and without newline
As stated by Pedro earlier, echo without new line and with preceding space works (provided "9" is a true [BackSpace]).
<nul set /p=.9 Hello everyone
I had some issues getting it to work in Windows 10 with the new console but managed the following way.
In CMD type:
echo .◘>bs.txt
I got "◘" by pressing [Alt] + [8]
(the actual symbol may vary depending upon codepage).
Then it's easy to copy the result from "bs.txt" using Notepad.exe to where it's needed.
#echo off
<nul set /p "_s=.◘ Hello everyone"
echo: here
With jscript:
#if (#X)==(#Y) #end /*
#cscript //E:JScript //nologo "%~nx0" %*
#exit /b %errorlevel%
*/if(WScript.Arguments.Count()>0) WScript.StdOut.Write(WScript.Arguments.Item(0));
if it is called write.bat you can test it like:
call write.bat string & echo _Another_String_
If you want to use powershell but with cmd defined variables you can use:
set str=_My_StrinG_
powershell "Write-Host -NoNewline ""%str%"""" & echo #Another#STRING#
Late answer here, but for anyone who needs to write special characters to a single line who find dbenham's answer to be about 80 lines too long and whose scripts may break (perhaps due to user-input) under the limitations of simply using set /p, it's probably easiest to just to pair your .bat or .cmd with a compiled C++ or C-language executable and then just cout or printf the characters. This will also allow you to easily write multiple times to one line if you're showing a sort of progress bar or something using characters, as OP apparently was.
I've set up an app for a couple of friends and me in batch with a auto-updating system, but I need to add a line of code in the auto-updating system. I decided to completely rewrite the file, it takes a long time to add 'echo' in from to every line and, '>>text.txt' at the end of every line and added '^' when needed, so I was wondering if there was an easier way of writing lot's of code to a file in batch.
Example:
#echo off
rem I need a way to do the following without adding 'echo' and '>>text.txt'
echo echo Checking for updates... >text.txt
echo echo 1.4 ^>^>new.txt >>text.txt
echo ping localhost -n 2 ^>nul >>text.txt
rem and so on and so on.
Or if there is a way to simply add a new line of code in a specific place in the file, that would also help!
Thanks in advance!
The following is how you can more easily and efficiently do what your current code does, by removing all of those individual write processes.
#( Echo #Echo Checking for updates...
Echo #(Echo 1.4^)^>^>"new.txt"
Echo #(%__AppDir__%ping.exe LocalHost -n 2^)^>NUL
)>"text.txt"
There are other possibilities, but at this time, based on the lack of information in your question, I'm reluctant to expand further at this time.
If I understand correctly, then you could do the following:
in the batch file, prepend each line of text that you want to output with :::: (this constitutes an invalid label that is going to be ignored);
then use the following code:
rem // Redirect to file:
> "text.txt" (
rem // Find all lines that begin with `::::` and loop over them:
for /F "delims=" %%T in ('findstr "^::::" "%~f0"') do (
rem // Store currently iterated line:
set "TEXT=%%T"
rem // Toggle delayed expansion to avoid loss of `!`:
setlocal EnableDelayedExpansion
rem // Remove `::::` prefix and output remaining line:
echo(!TEXT:*::::=!
endlocal
)
)
replace set "TEXT=%%T" by call set "TEXT=%%T" if you want to enable percent expansion within the returned text (so it could, for example, contain %~nx0, which would then be expanded to the file name of the script).
I am using this technique a lot (without the output redirection) for help systems in my batch files (/?).
Your asked
I need a way to do the following without adding echo and >>text.txt
The script takes advantage of the line continuation character, the caret ^.
The first character after the caret ^ is always escaped, so do linefeed characters:
#echo off
SETLOCAL EnableDelayedExpansion
call :init
>text.txt (
echo #echo off%NL%
Checking for updates...%NL%
>^>new.txt echo 1.4%NL%
>NUL ping localhost -n 2
)
ENDLOCAL
exit /b
:init
( set LF=^
%= 0X0D FORM FEED =%
)
::0X0A Carriage Return
FOR /F %%a in ('copy /Z "%~f0" nul') do set "CR=%%a"
::Create newline/line continuation character
set ^"NL=^^^%LF%%LF%^%LF%%LF%^^" %= Unix-Style Endings \n =%
::set ^"NL=%CR%^^^%LF%%LF%^%LF%%LF%^^" %= Windows-Style Endings \r\n =%
exit /b
The variable %LF% is a escaped linefeed, and %NL% is a escaped %LF% plus a escaped caret ^ for line continuation.
The code
>^>new.txt echo 1.4%NL%
>NUL ping localhost -n 2
might seem strange. Why isn't the first caret ^ escaped?
Because %NL% already escaped it.
Sources:
Explain how Windows batch newline variable hack works
https://stackoverflow.com/a/5642300/12861751
https://www.dostips.com/forum/viewtopic.php?t=6369
I have to run an executable (written in C#) 42 times separately for 42 US states on Windows command line. I wrote a batch file to automate the process. The 1st user input to the executable is 1, and the 2nd one is the state abbreviation (AL, AZ, CT etc.). I have written the following script to do it:
#echo off
for /f "tokens=1 delims=" %%x in (CropHailStates.txt) do (
(echo 1 & echo %%x)|Z:\Models\LossCalc.exe
)
Each row in CropHailStates.txt file contains the state abbreviation as follows:
AL
AZ
CT
Now in manual mode, when 1 is entered at the 1st prompt and AL is entered at the 2nd, the C# program reads a file named "AL.Even.CropLoss.csv". But when I run the batch script to do it automatically, I get the error message saying that the file "AL .Even.CropLoss.csv" is not found. The problem is related to the extra whitespace after AL. It’s somehow adding the whitespace after inserting the state abbreviation. It’s like pressing the spacebar after writing the state abbreviation, but before pressing enter.
How can I get rid of that extra whitespace in the file name?
The problem is an artifact of the pipe parser when dealing with a parenthesized block of code.
The source of the problem is described by jeb at Why does delayed expansion fail when inside a piped block of code?.
Each side of the pipe is executed in a new CMD /C process.
When a multi-line parenthesized block gets piped, the parser must repackage the entire block into a single line so that it can be executed via CMD /C
(
echo line 1
echo line 2
) | findstr "^"
The left side of the pipe is executed as:
C:\WINDOWS\system32\cmd.exe /S /D /c" ( echo line 1 & echo line 2 )"
You can see the extra spaces that are introduced.
Even though your code is already on a single line, it still goes through the same parser that introduces those pesky spaces.
I know of three relatively simple solutions that eliminate the unwanted spaces without the need for a temporary file.
1) Add an extra CMD /C where you explicitly get the exact behavior you are looking for
#echo off
for /f "tokens=1 delims=" %%x in (CropHailStates.txt) do (
cmd /c "echo 1&echo %%x"|Z:\Models\LossCalc.exe
)
2) Store part of the command in a variable and delay expansion until execution of CMD /C
#echo off
setlocal
for /f "tokens=1 delims=" %%x in (CropHailStates.txt) do (
set "cmd=&echo %%x"
(echo 1%%cmd%%)|Z:\Models\LossCalc.exe
)
3) Introduce delayed expansion of a linefeed variable - a mind blowing technique developed by jeb that he describes in that same SO link that I provided
#echo off
setlocal
set ^"LF=^
%= This creates a linefeed character =%
"
for /f "tokens=1 delims=" %%x in (CropHailStates.txt) do (
(echo 1%%LF%%echo %%x%%LF%%)|Z:\Models\LossCalc.exe
)
(echo 1& echo %%x)>tempfile.txt
Z:\Models\LossCalc.exe <tempfile.txt
del tempfile.txt
should provide the data without the trailing spaces
To get rid of the last character (the whitespace) you can do:
#echo off
setlocal EnableDelayedExpansion
for /f "tokens=1 delims=" %%x in (CropHailStates.txt) do (
set "result=%%x"
(echo 1 & echo !result:~0,-1!)|Z:\Models\LossCalc.exe
)
Hope it helps.
I deal with a large text files daily, I need to add a single "-" to each line 8 characters in for instance :
ABCDEF DC01 B738
ABCDEF B787
would become
ABCDEF -DC01 B738
ABCDEF - B787
How easy is this to do with a batch file?
regards
David
#echo off
setlocal enabledelayedexpansion
(for /f "delims=" %%a in (input.txt) do (
set line=%%a
set line=!line:~0,7!-!line:~7!
echo !line!
))>output.txt
Note: this will remove empty lines and has problems with exclamation marks. (may or may not be a problem; depends on your file content)
It also will eliminate lines that begin with ; due to default EOL character.
Also, lines are limited to ~8190 bytes max length (Thanks dbenham)
Here is a "robust" pure batch solution that preserves ! and empty lines. But it is still limited to ~8190 max line length, and it is painfully slow for large files. This will not modify lines that have less than 7 characters.
#echo off
setlocal disableDelayedExpansion
set "file=file.txt"
>"%file%.new" (
for /f "delims=" %%A in ('findstr /n "^"` "file.txt"') do (
set "s=%%A"
setlocal enableDelayedExpansion
set "s=!s:*:=!"
if not defined s (
echo(
) else if "!s:~7!" equ "" (
echo(!s!
else (
echo(!s:~0,7!-!s:~7!
)
endlocal
)
)
move /y "%file%.new" "%file%" >nul
And here is a truly robust and fast solution that uses JREPL.BAT - a regular text processing utility that is pure script (batch/JScript) that runs natively on any Windows machine from XP onward - no 3rd party executable required. This solution also does not modify lines that have fewer than 7 characters.
From the command line:
jrepl "^.{7}" "$&-" /f file.txt /o -
From within a batch script
call jrepl "^.{7}" "$&-" /f file.txt /o -
This is a simple two-lines Batch-JScript hybrid script solution that have all the advantages of JScript language: is fast, robust, manage all special characters and preserve empty lines. Besides, it is simple enough to be understood and then modified for other similar tasks after read the documentation. Copy it to a file with .BAT extension.
#set #a=0 // & cscript //nologo //E:JScript "%~F0" < input.txt > output.txt & goto :EOF
WScript.Stdout.Write(WScript.Stdin.ReadAll().replace(/^.{7}/gm,"$&-"));
So, I've been trying to create a simple spinning line thing that goes on for a set number of loops. I've encountered a problem: I can't find a way to add to a variable, or have a loop counter. This is my code so far (Other general criticisms are accepted too: I'm new to this and it all helps.)
#echo off
:1
echo
echo
echo
echo -
echo
cls
echo
echo
echo /
echo
cls
echo
echo
echo I
echo
cls
echo
echo
echo \
echo
cls
echo
echo
echo -
echo
IF %timer%
goto 1
pause
Really sorry if it's already been asked; I just can't seem to find what I'm looking for. Also, it's very possible this could just be a simple command, in which case i apologise again.
There's a couple of errors with your code as it stands.
The major one is
IF %timer%
goto 1
Batch is a ver old-fashioned language and is very particular about syntax. You can get a syntax description by typing
if /? |more
at the prompt. (replace if with the keyword you desire)
if requires
if string1==string2 thingtodoiftrue
Over the years, the syntax has been expanded, still maintaining the old version for compatibility so that the general form is now
if string1==string2 (thingtodoiftrue) else (thingtodoiffalse)
where == may now be a number of operators (equ, neq, ...); you can add a /i switch to make the strings case-insensitive, or a not keyword to reverse the sense. The parentheses are optional if the thingtodo is a single statement.
There are some quirky syntax requirements however. Either thingtodoiftrue or ( must be on the same physical line as the if keyword. The sequence ) else ( must all be on one physical line (if it's used)
As for performing some variety of count using your original structure, there are many ways. Here's one:
#echo off
set count=15
:1
....
set /a count=count-1
IF %count% neq 0 goto 1
pause
This may be what you are looking for. This runs the code 10000 times and it could be modified according to your need.
#echo off
for /l %%i in (1,1,10000) do (
echo -
cls
echo /
cls
echo I
cls
echo \
cls
)
Cheers, G
#echo off
setlocal enableextensions disabledelayedexpansion
rem Get a 0x13 character (carriage return) char inside a variable
for /f %%a in ('copy /Z "%~f0" nul') do set "CR=%%a"
rem Spin the line
setlocal enabledelayedexpansion
for /l %%a in (1 1 5000) do for %%b in (- \ ^| /) do (
set /a "pct=%%a / 50"
<nul set /p ".=%%b !pct!%% !cr!"
)
endlocal
The basic idea is to output the spinning element, followed by the percentage. To keep all the output in the same line
<nul set /p "var=outputtext"
is used. This echoes the indicated text to console, waits for input, that is readed from nul, ending the prompt wait and continues without moving the cursor to the next line. There is no line feed
Now, it is necessary overwrite this line with the new information each time. To do it, it is necessary to get a carriage return character into a variable. For it, the for /f is used, retrieving the needed carriage return character from the output of the copy command.
note: the disabledelayedexpansion is necessary in this step to avoid problems if the full path/filename of the batch file (%~f0) contains any exclamation character.
The remaining code just iterates painting the corresponding character in the list, calculating the percentage to output and printing all to the console, without the line feed (<nul set /p ...) but with an aditional carriage return that moves the cursor to the start of the line. So, the next output will overwrite the previous one
note: in this case, enabledelayedexpansion is needed to get access to the content of the changed percentage variable and to output the carriage return. Without delayed expansion active, the parser removes the carriage return from the output.