Related
i am creating a script that will help updating the GoLang compile binary in a GNU/Linux system.
but it fail
#!/usr/bin/env bash
# -*- coding: utf-8 -*-
# set -e
# ==============================================================================
# title : Semi Automatic Update GoLang
# description : Script for Install, setup path, permission and update golang
# author : Walddys Emmanuel Dorrejo Céspedes
# usage : bash up_install.sh
# notes : Execute this Script will ask sudo password
# dependencies : wget awk sed curl tar
# ==============================================================================
## Get Golang Versions from repository
declare -a go_jversion go_sversion
readarray -t go_jversion < <(curl -s https://go.googlesource.com/go/+refs?format=JSON | grep -Eo "go[0-9]\.[^\"]+" | sort -V)
## Delete go_versions RC and Beta from the pool.
for i in "${!go_jversion[#]}"; do
if [[ "${go_jversion[i]}" =~ (rc|beta) ]]; then
unset "go_jversion[i]"
fi
done
unset go_sversion # Not allow to grow indefinitely the pool when re-execute the scripts
for i in "${!go_jversion[#]}"; do
set -vx
## Create an array of the stables versions (Those versions that repeat more than or equal to 2 are stables)
# if [[ "${go_jversion[i]}" == "${go_jversion[i + 1]}" ]] && [[ "${go_sversion[i - 1]}" != "${go_jversion[i + 1]}" ]]; then
# go_sversion+=("${go_jversion[i]}")
# fi
In this section i am comparing major version + minimum version, to exclude the patch version of the array, but the condition after the "&&", the array "${go_sversion[$i -1]}" is expanding null in each cycle of the loop, when i am assigning a value in a cycle before.
## Create an array of the stables versions (Those versions that repeat more than or equal to 2 are stables) (second version)
if [[ "${go_jversion[$i]}" == "${go_jversion[$i + 1]}" && "${go_sversion[$i - 1]}" != "${go_jversion[$i]}" ]]; then
go_sversion+=("${go_jversion[$i]}")
echo "${!go_sversion[$i]}"
fi
set +vx
done
echo "${go_sversion[#]}"
echo "${!go_sversion[#]}"
My issue is in the section where "${go_sversion[$i -1]}", why is not expanding?
assign value to "${go_sversion[$i -1]}" the value display in the next cycle of the loop
Arrays in bash are allowed to be sparse, meaning their indices are not required to be strictly sequential. For example:
arr=(1 2 3)
echo "${arr[#]}" # prints 1 2 3
echo "${!arr[#]}" # prints 0 1 2
unset arr\[1\]
echo "${arr[#]}" # prints 1 3
echo "${!arr[#]}" # prints 0 2
When you unset the RC and Beta values you could be creating these types of gaps in your jversion array, but you're assigning to the sversion array sequentially. This means the indices do not align between the arrays.
If your jversion looks like my array above, you might put something into sversion[0] from jversion[0], then process jversion[2] and attempt to match it against sversion[1] which doesn't exist yet.
One simple way to de-sparsify the array is to reassign it:
go_jversion=( "${go_jversion[#]}" )
This will reassign the contents of the array to itself in sequential order without any gaps in the indices.
If this is unviable for some reason, you'll have to write code that is aware of the possible sparseness of the array. For example, instead of blinding looking at go_sversion[i-1] you could look at go_sversion[-1] which will always give you the last item in the array.
I want to write a script that loops through 15 strings (array possibly?) Is that possible?
Something like:
for databaseName in listOfNames
then
# Do something
end
You can use it like this:
## declare an array variable
declare -a arr=("element1" "element2" "element3")
## now loop through the above array
for i in "${arr[#]}"
do
echo "$i"
# or do whatever with individual element of the array
done
# You can access them using echo "${arr[0]}", "${arr[1]}" also
Also works for multi-line array declaration
declare -a arr=("element1"
"element2" "element3"
"element4"
)
That is possible, of course.
for databaseName in a b c d e f; do
# do something like: echo $databaseName
done
See Bash Loops for, while and until for details.
None of those answers include a counter...
#!/bin/bash
## declare an array variable
declare -a array=("one" "two" "three")
# get length of an array
arraylength=${#array[#]}
# use for loop to read all values and indexes
for (( i=0; i<${arraylength}; i++ ));
do
echo "index: $i, value: ${array[$i]}"
done
Output:
index: 0, value: one
index: 1, value: two
index: 2, value: three
Yes
for Item in Item1 Item2 Item3 Item4 ;
do
echo $Item
done
Output:
Item1
Item2
Item3
Item4
To preserve spaces; single or double quote list entries and double quote list expansions.
for Item in 'Item 1' 'Item 2' 'Item 3' 'Item 4' ;
do
echo "$Item"
done
Output:
Item 1
Item 2
Item 3
Item 4
To make list over multiple lines
for Item in Item1 \
Item2 \
Item3 \
Item4
do
echo $Item
done
Output:
Item1
Item2
Item3
Item4
Simple list variable
List=( Item1 Item2 Item3 )
or
List=(
Item1
Item2
Item3
)
Display the list variable:
echo ${List[*]}
Output:
Item1 Item2 Item3
Loop through the list:
for Item in ${List[*]}
do
echo $Item
done
Output:
Item1
Item2
Item3
Create a function to go through a list:
Loop(){
for item in ${*} ;
do
echo ${item}
done
}
Loop ${List[*]}
Using the declare keyword (command) to create the list, which is technically called an array:
declare -a List=(
"element 1"
"element 2"
"element 3"
)
for entry in "${List[#]}"
do
echo "$entry"
done
Output:
element 1
element 2
element 3
Creating an associative array. A dictionary:
declare -A continent
continent[Vietnam]=Asia
continent[France]=Europe
continent[Argentina]=America
for item in "${!continent[#]}";
do
printf "$item is in ${continent[$item]} \n"
done
Output:
Argentina is in America
Vietnam is in Asia
France is in Europe
CSV variables or files in to a list. Changing the internal field separator from a space, to what ever you want. In the example below it is changed to a comma
List="Item 1,Item 2,Item 3"
Backup_of_internal_field_separator=$IFS
IFS=,
for item in $List;
do
echo $item
done
IFS=$Backup_of_internal_field_separator
Output:
Item 1
Item 2
Item 3
If need to number them:
`
this is called a back tick. Put the command inside back ticks.
`command`
It is next to the number one on your keyboard and or above the tab key, on a standard American English language keyboard.
List=()
Start_count=0
Step_count=0.1
Stop_count=1
for Item in `seq $Start_count $Step_count $Stop_count`
do
List+=(Item_$Item)
done
for Item in ${List[*]}
do
echo $Item
done
Output is:
Item_0.0
Item_0.1
Item_0.2
Item_0.3
Item_0.4
Item_0.5
Item_0.6
Item_0.7
Item_0.8
Item_0.9
Item_1.0
Becoming more familiar with bashes behavior:
Create a list in a file
cat <<EOF> List_entries.txt
Item1
Item 2
'Item 3'
"Item 4"
Item 7 : *
"Item 6 : * "
"Item 6 : *"
Item 8 : $PWD
'Item 8 : $PWD'
"Item 9 : $PWD"
EOF
Read the list file in to a list and display
List=$(cat List_entries.txt)
echo $List
echo '$List'
echo "$List"
echo ${List[*]}
echo '${List[*]}'
echo "${List[*]}"
echo ${List[#]}
echo '${List[#]}'
echo "${List[#]}"
BASH commandline reference manual: Special meaning of certain characters or words to the shell.
In the same spirit as 4ndrew's answer:
listOfNames="RA
RB
R C
RD"
# To allow for other whitespace in the string:
# 1. add double quotes around the list variable, or
# 2. see the IFS note (under 'Side Notes')
for databaseName in "$listOfNames" # <-- Note: Added "" quotes.
do
echo "$databaseName" # (i.e. do action / processing of $databaseName here...)
done
# Outputs
# RA
# RB
# R C
# RD
B. No whitespace in the names:
listOfNames="RA
RB
R C
RD"
for databaseName in $listOfNames # Note: No quotes
do
echo "$databaseName" # (i.e. do action / processing of $databaseName here...)
done
# Outputs
# RA
# RB
# R
# C
# RD
Notes
In the second example, using listOfNames="RA RB R C RD" has the same output.
Other ways to bring in data include:
stdin (listed below),
variables,
an array (the accepted answer),
a file...
Read from stdin
# line delimited (each databaseName is stored on a line)
while read databaseName
do
echo "$databaseName" # i.e. do action / processing of $databaseName here...
done # <<< or_another_input_method_here
the bash IFS "field separator to line" [1] delimiter can be specified in the script to allow other whitespace (i.e. IFS='\n', or for MacOS IFS='\r')
I like the accepted answer also :) -- I've include these snippets as other helpful ways that also answer the question.
Including #!/bin/bash at the top of the script file indicates the execution environment.
It took me months to figure out how to code this simply :)
Other Sources
(while read loop)
You can use the syntax of ${arrayName[#]}
#!/bin/bash
# declare an array called files, that contains 3 values
files=( "/etc/passwd" "/etc/group" "/etc/hosts" )
for i in "${files[#]}"
do
echo "$i"
done
Surprised that nobody's posted this yet -- if you need the indices of the elements while you're looping through the array, you can do this:
arr=(foo bar baz)
for i in ${!arr[#]}
do
echo $i "${arr[i]}"
done
Output:
0 foo
1 bar
2 baz
I find this a lot more elegant than the "traditional" for-loop style (for (( i=0; i<${#arr[#]}; i++ ))).
(${!arr[#]} and $i don't need to be quoted because they're just numbers; some would suggest quoting them anyway, but that's just personal preference.)
This is also easy to read:
FilePath=(
"/tmp/path1/" #FilePath[0]
"/tmp/path2/" #FilePath[1]
)
#Loop
for Path in "${FilePath[#]}"
do
echo "$Path"
done
I used this approach for my GitHub updates, and I found it simple.
## declare an array variable
arr_variable=("kofi" "kwame" "Ama")
## now loop through the above array
for i in "${arr_variable[#]}"
do
echo "$i"
done
You can iterate through bash array values using a counter with three-expression (C style) to read all values and indexes for loops syntax:
declare -a kofi=("kofi" "kwame" "Ama")
# get the length of the array
length=${#kofi[#]}
for (( j=0; j<${length}; j++ ));
do
print (f "Current index %d with value %s\n" $j "${kofi[$j]}")
done
Simple way :
arr=("sharlock" "bomkesh" "feluda" ) ##declare array
len=${#arr[*]} # it returns the array length
#iterate with while loop
i=0
while [ $i -lt $len ]
do
echo ${arr[$i]}
i=$((i+1))
done
#iterate with for loop
for i in $arr
do
echo $i
done
#iterate with splice
echo ${arr[#]:0:3}
listOfNames="db_one db_two db_three"
for databaseName in $listOfNames
do
echo $databaseName
done
or just
for databaseName in db_one db_two db_three
do
echo $databaseName
done
Implicit array for script or functions:
In addition to anubhava's correct answer: If basic syntax for loop is:
for var in "${arr[#]}" ;do ...$var... ;done
there is a special case in bash:
When running a script or a function, arguments passed at command lines will be assigned to $# array variable, you can access by $1, $2, $3, and so on.
This can be populated (for test) by
set -- arg1 arg2 arg3 ...
A loop over this array could be written simply:
for item ;do
echo "This is item: $item."
done
Note that the reserved work in is not present and no array name too!
Sample:
set -- arg1 arg2 arg3 ...
for item ;do
echo "This is item: $item."
done
This is item: arg1.
This is item: arg2.
This is item: arg3.
This is item: ....
Note that this is same than
for item in "$#";do
echo "This is item: $item."
done
Then into a script:
#!/bin/bash
for item ;do
printf "Doing something with '%s'.\n" "$item"
done
Save this in a script myscript.sh, chmod +x myscript.sh, then
./myscript.sh arg1 arg2 arg3 ...
Doing something with 'arg1'.
Doing something with 'arg2'.
Doing something with 'arg3'.
Doing something with '...'.
Same in a function:
myfunc() { for item;do cat <<<"Working about '$item'."; done ; }
Then
myfunc item1 tiem2 time3
Working about 'item1'.
Working about 'tiem2'.
Working about 'time3'.
The declare array doesn't work for Korn shell. Use the below example for the Korn shell:
promote_sla_chk_lst="cdi xlob"
set -A promote_arry $promote_sla_chk_lst
for i in ${promote_arry[*]};
do
echo $i
done
Try this. It is working and tested.
for k in "${array[#]}"
do
echo $k
done
# For accessing with the echo command: echo ${array[0]}, ${array[1]}
This is similar to user2533809's answer, but each file will be executed as a separate command.
#!/bin/bash
names="RA
RB
R C
RD"
while read -r line; do
echo line: "$line"
done <<< "$names"
If you are using Korn shell, there is "set -A databaseName ", else there is "declare -a databaseName"
To write a script working on all shells,
set -A databaseName=("db1" "db2" ....) ||
declare -a databaseName=("db1" "db2" ....)
# now loop
for dbname in "${arr[#]}"
do
echo "$dbname" # or whatever
done
It should be work on all shells.
What I really needed for this was something like this:
for i in $(the_array); do something; done
For instance:
for i in $(ps -aux | grep vlc | awk '{ print $2 }'); do kill -9 $i; done
(Would kill all processes with vlc in their name)
How you loop through an array, depends on the presence of new line characters. With new line characters separating the array elements, the array can be referred to as "$array", otherwise it should be referred to as "${array[#]}". The following script will make it clear:
#!/bin/bash
mkdir temp
mkdir temp/aaa
mkdir temp/bbb
mkdir temp/ccc
array=$(ls temp)
array1=(aaa bbb ccc)
array2=$(echo -e "aaa\nbbb\nccc")
echo '$array'
echo "$array"
echo
for dirname in "$array"; do
echo "$dirname"
done
echo
for dirname in "${array[#]}"; do
echo "$dirname"
done
echo
echo '$array1'
echo "$array1"
echo
for dirname in "$array1"; do
echo "$dirname"
done
echo
for dirname in "${array1[#]}"; do
echo "$dirname"
done
echo
echo '$array2'
echo "$array2"
echo
for dirname in "$array2"; do
echo "$dirname"
done
echo
for dirname in "${array2[#]}"; do
echo "$dirname"
done
rmdir temp/aaa
rmdir temp/bbb
rmdir temp/ccc
rmdir temp
Possible first line of every Bash script/session:
say() { for line in "${#}" ; do printf "%s\n" "${line}" ; done ; }
Use e.g.:
$ aa=( 7 -4 -e ) ; say "${aa[#]}"
7
-4
-e
May consider: echo interprets -e as option here
Single line looping,
declare -a listOfNames=('db_a' 'db_b' 'db_c')
for databaseName in ${listOfNames[#]}; do echo $databaseName; done;
you will get an output like this,
db_a
db_b
db_c
I loop through an array of my projects for a git pull update:
#!/bin/sh
projects="
web
ios
android
"
for project in $projects do
cd $HOME/develop/$project && git pull
end
I need to remove an element from an array in bash shell.
Generally I'd simply do:
array=("${(#)array:#<element to remove>}")
Unfortunately the element I want to remove is a variable so I can't use the previous command.
Down here an example:
array+=(pluto)
array+=(pippo)
delete=(pluto)
array( ${array[#]/$delete} ) -> but clearly doesn't work because of {}
Any idea?
The following works as you would like in bash and zsh:
$ array=(pluto pippo)
$ delete=pluto
$ echo ${array[#]/$delete}
pippo
$ array=( "${array[#]/$delete}" ) #Quotes when working with strings
If need to delete more than one element:
...
$ delete=(pluto pippo)
for del in ${delete[#]}
do
array=("${array[#]/$del}") #Quotes when working with strings
done
Caveat
This technique actually removes prefixes matching $delete from the elements, not necessarily whole elements.
Update
To really remove an exact item, you need to walk through the array, comparing the target to each element, and using unset to delete an exact match.
array=(pluto pippo bob)
delete=(pippo)
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
Note that if you do this, and one or more elements is removed, the indices will no longer be a continuous sequence of integers.
$ declare -p array
declare -a array=([0]="pluto" [2]="bob")
The simple fact is, arrays were not designed for use as mutable data structures. They are primarily used for storing lists of items in a single variable without needing to waste a character as a delimiter (e.g., to store a list of strings which can contain whitespace).
If gaps are a problem, then you need to rebuild the array to fill the gaps:
for i in "${!array[#]}"; do
new_array+=( "${array[i]}" )
done
array=("${new_array[#]}")
unset new_array
You could build up a new array without the undesired element, then assign it back to the old array. This works in bash:
array=(pluto pippo)
new_array=()
for value in "${array[#]}"
do
[[ $value != pluto ]] && new_array+=($value)
done
array=("${new_array[#]}")
unset new_array
This yields:
echo "${array[#]}"
pippo
This is the most direct way to unset a value if you know it's position.
$ array=(one two three)
$ echo ${#array[#]}
3
$ unset 'array[1]'
$ echo ${array[#]}
one three
$ echo ${#array[#]}
2
This answer is specific to the case of deleting multiple values from large arrays, where performance is important.
The most voted solutions are (1) pattern substitution on an array, or (2) iterating over the array elements. The first is fast, but can only deal with elements that have distinct prefix, the second has O(n*k), n=array size, k=elements to remove. Associative array are relative new feature, and might not have been common when the question was originally posted.
For the exact match case, with large n and k, possible to improve performance from O(nk) to O(n+klog(k)). In practice, O(n) assuming k much lower than n. Most of the speed up is based on using associative array to identify items to be removed.
Performance (n-array size, k-values to delete). Performance measure seconds of user time
N K New(seconds) Current(seconds) Speedup
1000 10 0.005 0.033 6X
10000 10 0.070 0.348 5X
10000 20 0.070 0.656 9X
10000 1 0.043 0.050 -7%
As expected, the current solution is linear to N*K, and the fast solution is practically linear to K, with much lower constant. The fast solution is slightly slower vs the current solution when k=1, due to additional setup.
The 'Fast' solution: array=list of input, delete=list of values to remove.
declare -A delk
for del in "${delete[#]}" ; do delk[$del]=1 ; done
# Tag items to remove, based on
for k in "${!array[#]}" ; do
[ "${delk[${array[$k]}]-}" ] && unset 'array[k]'
done
# Compaction
array=("${array[#]}")
Benchmarked against current solution, from the most-voted answer.
for target in "${delete[#]}"; do
for i in "${!array[#]}"; do
if [[ ${array[i]} = $target ]]; then
unset 'array[i]'
fi
done
done
array=("${array[#]}")
Here's a one-line solution with mapfile:
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "<regexp>")
Example:
$ arr=("Adam" "Bob" "Claire"$'\n'"Smith" "David" "Eve" "Fred")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 6 Contents: Adam Bob Claire
Smith David Eve Fred
$ mapfile -d $'\0' -t arr < <(printf '%s\0' "${arr[#]}" | grep -Pzv "^Claire\nSmith$")
$ echo "Size: ${#arr[*]} Contents: ${arr[*]}"
Size: 5 Contents: Adam Bob David Eve Fred
This method allows for great flexibility by modifying/exchanging the grep command and doesn't leave any empty strings in the array.
Partial answer only
To delete the first item in the array
unset 'array[0]'
To delete the last item in the array
unset 'array[-1]'
To expand on the above answers, the following can be used to remove multiple elements from an array, without partial matching:
ARRAY=(one two onetwo three four threefour "one six")
TO_REMOVE=(one four)
TEMP_ARRAY=()
for pkg in "${ARRAY[#]}"; do
for remove in "${TO_REMOVE[#]}"; do
KEEP=true
if [[ ${pkg} == ${remove} ]]; then
KEEP=false
break
fi
done
if ${KEEP}; then
TEMP_ARRAY+=(${pkg})
fi
done
ARRAY=("${TEMP_ARRAY[#]}")
unset TEMP_ARRAY
This will result in an array containing:
(two onetwo three threefour "one six")
Here's a (probably very bash-specific) little function involving bash variable indirection and unset; it's a general solution that does not involve text substitution or discarding empty elements and has no problems with quoting/whitespace etc.
delete_ary_elmt() {
local word=$1 # the element to search for & delete
local aryref="$2[#]" # a necessary step since '${!$2[#]}' is a syntax error
local arycopy=("${!aryref}") # create a copy of the input array
local status=1
for (( i = ${#arycopy[#]} - 1; i >= 0; i-- )); do # iterate over indices backwards
elmt=${arycopy[$i]}
[[ $elmt == $word ]] && unset "$2[$i]" && status=0 # unset matching elmts in orig. ary
done
return $status # return 0 if something was deleted; 1 if not
}
array=(a 0 0 b 0 0 0 c 0 d e 0 0 0)
delete_ary_elmt 0 array
for e in "${array[#]}"; do
echo "$e"
done
# prints "a" "b" "c" "d" in lines
Use it like delete_ary_elmt ELEMENT ARRAYNAME without any $ sigil. Switch the == $word for == $word* for prefix matches; use ${elmt,,} == ${word,,} for case-insensitive matches; etc., whatever bash [[ supports.
It works by determining the indices of the input array and iterating over them backwards (so deleting elements doesn't screw up iteration order). To get the indices you need to access the input array by name, which can be done via bash variable indirection x=1; varname=x; echo ${!varname} # prints "1".
You can't access arrays by name like aryname=a; echo "${$aryname[#]}, this gives you an error. You can't do aryname=a; echo "${!aryname[#]}", this gives you the indices of the variable aryname (although it is not an array). What DOES work is aryref="a[#]"; echo "${!aryref}", which will print the elements of the array a, preserving shell-word quoting and whitespace exactly like echo "${a[#]}". But this only works for printing the elements of an array, not for printing its length or indices (aryref="!a[#]" or aryref="#a[#]" or "${!!aryref}" or "${#!aryref}", they all fail).
So I copy the original array by its name via bash indirection and get the indices from the copy. To iterate over the indices in reverse I use a C-style for loop. I could also do it by accessing the indices via ${!arycopy[#]} and reversing them with tac, which is a cat that turns around the input line order.
A function solution without variable indirection would probably have to involve eval, which may or may not be safe to use in that situation (I can't tell).
Using unset
To remove an element at particular index, we can use unset and then do copy to another array. Only just unset is not required in this case. Because unset does not remove the element it just sets null string to the particular index in array.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
unset 'arr[1]'
declare -a arr2=()
i=0
for element in "${arr[#]}"
do
arr2[$i]=$element
((++i))
done
echo "${arr[#]}"
echo "1st val is ${arr[1]}, 2nd val is ${arr[2]}"
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
aa cc dd ee
1st val is , 2nd val is cc
aa cc dd ee
1st val is cc, 2nd val is dd
Using :<idx>
We can remove some set of elements using :<idx> also. For example if we want to remove 1st element we can use :1 as mentioned below.
declare -a arr=('aa' 'bb' 'cc' 'dd' 'ee')
arr2=("${arr[#]:1}")
echo "${arr2[#]}"
echo "1st val is ${arr2[1]}, 2nd val is ${arr2[2]}"
Output is
bb cc dd ee
1st val is cc, 2nd val is dd
http://wiki.bash-hackers.org/syntax/pe#substring_removal
${PARAMETER#PATTERN} # remove from beginning
${PARAMETER##PATTERN} # remove from the beginning, greedy match
${PARAMETER%PATTERN} # remove from the end
${PARAMETER%%PATTERN} # remove from the end, greedy match
In order to do a full remove element, you have to do an unset command with an if statement. If you don't care about removing prefixes from other variables or about supporting whitespace in the array, then you can just drop the quotes and forget about for loops.
See example below for a few different ways to clean up an array.
options=("foo" "bar" "foo" "foobar" "foo bar" "bars" "bar")
# remove bar from the start of each element
options=("${options[#]/#"bar"}")
# options=("foo" "" "foo" "foobar" "foo bar" "s" "")
# remove the complete string "foo" in a for loop
count=${#options[#]}
for ((i = 0; i < count; i++)); do
if [ "${options[i]}" = "foo" ] ; then
unset 'options[i]'
fi
done
# options=( "" "foobar" "foo bar" "s" "")
# remove empty options
# note the count variable can't be recalculated easily on a sparse array
for ((i = 0; i < count; i++)); do
# echo "Element $i: '${options[i]}'"
if [ -z "${options[i]}" ] ; then
unset 'options[i]'
fi
done
# options=("foobar" "foo bar" "s")
# list them with select
echo "Choose an option:"
PS3='Option? '
select i in "${options[#]}" Quit
do
case $i in
Quit) break ;;
*) echo "You selected \"$i\"" ;;
esac
done
Output
Choose an option:
1) foobar
2) foo bar
3) s
4) Quit
Option?
Hope that helps.
There is also this syntax, e.g. if you want to delete the 2nd element :
array=("${array[#]:0:1}" "${array[#]:2}")
which is in fact the concatenation of 2 tabs. The first from the index 0 to the index 1 (exclusive) and the 2nd from the index 2 to the end.
POSIX shell script does not have arrays.
So most probably you are using a specific dialect such as bash, korn shells or zsh.
Therefore, your question as of now cannot be answered.
Maybe this works for you:
unset array[$delete]
What I do is:
array="$(echo $array | tr ' ' '\n' | sed "/itemtodelete/d")"
BAM, that item is removed.
This is a quick-and-dirty solution that will work in simple cases but will break if (a) there are regex special characters in $delete, or (b) there are any spaces at all in any items. Starting with:
array+=(pluto)
array+=(pippo)
delete=(pluto)
Delete all entries exactly matching $delete:
array=(`echo $array | fmt -1 | grep -v "^${delete}$" | fmt -999999`)
resulting in
echo $array -> pippo, and making sure it's an array:
echo $array[1] -> pippo
fmt is a little obscure: fmt -1 wraps at the first column (to put each item on its own line. That's where the problem arises with items in spaces.) fmt -999999 unwraps it back to one line, putting back the spaces between items. There are other ways to do that, such as xargs.
Addendum: If you want to delete just the first match, use sed, as described here:
array=(`echo $array | fmt -1 | sed "0,/^${delete}$/{//d;}" | fmt -999999`)
Actually, I just noticed that the shell syntax somewhat has a behavior built-in that allows for easy reconstruction of the array when, as posed in the question, an item should be removed.
# let's set up an array of items to consume:
x=()
for (( i=0; i<10; i++ )); do
x+=("$i")
done
# here, we consume that array:
while (( ${#x[#]} )); do
i=$(( $RANDOM % ${#x[#]} ))
echo "${x[i]} / ${x[#]}"
x=("${x[#]:0:i}" "${x[#]:i+1}")
done
Notice how we constructed the array using bash's x+=() syntax?
You could actually add more than one item with that, the content of a whole other array at once.
In ZSH this is dead easy (note this uses more bash compatible syntax than necessary where possible for ease of understanding):
# I always include an edge case to make sure each element
# is not being word split.
start=(one two three 'four 4' five)
work=(${(#)start})
idx=2
val=${work[idx]}
# How to remove a single element easily.
# Also works for associative arrays (at least in zsh)
work[$idx]=()
echo "Array size went down by one: "
[[ $#work -eq $(($#start - 1)) ]] && echo "OK"
echo "Array item "$val" is now gone: "
[[ -z ${work[(r)$val]} ]] && echo OK
echo "Array contents are as expected: "
wanted=("${start[#]:0:1}" "${start[#]:2}")
[[ "${(j.:.)wanted[#]}" == "${(j.:.)work[#]}" ]] && echo "OK"
echo "-- array contents: start --"
print -l -r -- "-- $#start elements" ${(#)start}
echo "-- array contents: work --"
print -l -r -- "-- $#work elements" "${work[#]}"
Results:
Array size went down by one:
OK
Array item two is now gone:
OK
Array contents are as expected:
OK
-- array contents: start --
-- 5 elements
one
two
three
four 4
five
-- array contents: work --
-- 4 elements
one
three
four 4
five
To avoid conflicts with array index using unset - see https://stackoverflow.com/a/49626928/3223785 and https://stackoverflow.com/a/47798640/3223785 for more information - reassign the array to itself: ARRAY_VAR=(${ARRAY_VAR[#]}).
#!/bin/bash
ARRAY_VAR=(0 1 2 3 4 5 6 7 8 9)
unset ARRAY_VAR[5]
unset ARRAY_VAR[4]
ARRAY_VAR=(${ARRAY_VAR[#]})
echo ${ARRAY_VAR[#]}
A_LENGTH=${#ARRAY_VAR[*]}
for (( i=0; i<=$(( $A_LENGTH -1 )); i++ )) ; do
echo ""
echo "INDEX - $i"
echo "VALUE - ${ARRAY_VAR[$i]}"
done
exit 0
[Ref.: https://tecadmin.net/working-with-array-bash-script/ ]
How about something like:
array=(one two three)
array_t=" ${array[#]} "
delete=one
array=(${array_t// $delete / })
unset array_t
#/bin/bash
echo "# define array with six elements"
arr=(zero one two three 'four 4' five)
echo "# unset by index: 0"
unset -v 'arr[0]'
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
arr_delete_by_content() { # value to delete
for i in ${!arr[*]}; do
[ "${arr[$i]}" = "$1" ] && unset -v 'arr[$i]'
done
}
echo "# unset in global variable where value: three"
arr_delete_by_content three
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
echo "# rearrange indices"
arr=( "${arr[#]}" )
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_value() { # value arrayelements..., returns array decl.
local e val=$1; new=(); shift
for e in "${#}"; do [ "$val" != "$e" ] && new+=("$e"); done
declare -p new|sed 's,^[^=]*=,,'
}
echo "# new array without value: two"
declare -a arr="$(delete_value two "${arr[#]}")"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
delete_values() { # arraydecl values..., returns array decl. (keeps indices)
declare -a arr="$1"; local i v; shift
for v in "${#}"; do
for i in ${!arr[*]}; do
[ "$v" = "${arr[$i]}" ] && unset -v 'arr[$i]'
done
done
declare -p arr|sed 's,^[^=]*=,,'
}
echo "# new array without values: one five (keep indices)"
declare -a arr="$(delete_values "$(declare -p arr|sed 's,^[^=]*=,,')" one five)"
for i in ${!arr[*]}; do echo "arr[$i]=${arr[$i]}"; done
# new array without multiple values and rearranged indices is left to the reader
First let me say I followed questions on stackoverflow.com that relate to my question and it seems the rules are not applying. Let me show you.
The following script:
#!/bin/bash
OUTPUT_DIR=/share/es-ops/Build_Farm_Reports/WorkSpace_Reports
TODAY=`date +"%m-%d-%y"`
HOSTNAME=`hostname`
WORKSPACES=( "bob" "mel" "sideshow-ws2" )
if ! [ -f $OUTPUT_DIR/$HOSTNAME.csv ] && [ $HOSTNAME == "sideshow" ]; then
echo "$TODAY","$HOSTNAME" > $OUTPUT_DIR/$HOSTNAME.csv
echo "${WORKSPACES[0]}," >> $OUTPUT_DIR/$HOSTNAME.csv
sed -i "/^'"${WORKSPACES[0]}"'/$/'"${WORKSPACES[1]}"'/" $OUTPUT_DIR/$HOSTNAME.csv
sed -i "/^'"${WORKSPACES[1]}"'/$/${WORKSPACES[2]}"'/" $OUTPUT_DIR/$HOSTNAME.csv
fi
I want the output to look like:
09-20-14,sideshow
bob,mel,sideshow-ws2
the sed statements are supposed to append successive array elements to preceding ones on the same line. Now I know there's a simpler way to do this like:
echo "${WORKSPACES[0]},${WORKSPACES[1]},${WORKSPACES[2]}" >> $OUTPUT_DIR/$HOSTNAME.csv
But let's say I had 30 elements in the array and I wanted to appended them one after the other on the same line? Can you show me how to loop through the elements in an array and append them one after the other on the same line?
Also let's say I had the output of a command like:
df -m /export/ws/$ws | awk '{if (NR!=1) {print $3}}'
and I wanted to append that to the end of the same line.
But when I run it I get:
+ OUTPUT_DIR=/share/es-ops/Build_Farm_Reports/WorkSpace_Reports
++ date +%m-%d-%y
+ TODAY=09-20-14
++ hostname
+ HOSTNAME=sideshow
+ WORKSPACES=("bob" "mel" "sideshow-ws2")
+ '[' -f /share/es-ops/Build_Farm_Reports/WorkSpace_Reports/sideshow.csv ']'
And the file right now looks like:
09-20-14,sideshow
bob,
I am happy to report that user syme solved this (see below) but then I realized I need the date in the first column:
09-7-14,bob,mel,sideshow-ws2
Can I do this using syme's for loop?
Okay user syme solved this too he said "Just add $TODAY to the for loop" like this:
for v in "$TODAY" "${WORKSPACES[#]}"
Okay now the output looks like this I changed the elements in the array btw:
sideshow
09-20-14,bob_avail,bob_used,mel_avail,mel_used,sideshow-ws2_avail,sideshow-ws2_used
Now below that the next line will be populated by a , in the first column skipping the date and then:
df -m /export/ws/$v | awk '{if (NR!=1) {print $3}}
which equals the value of available space on bob in the first iteration
and then:
df -m /export/ws/$v | awk '{if (NR!=1) {print $2}}
which equals the value of used space on bob in the 2nd iteration
and then we just move on to the next value in ${WORKSPACE[#]}
which will be mel and do the available and used as we did with bob or $v above.
I know you geniuses on here will make child's play out of this.
I solved my own last question on this thread:
WORKSPACES2=( "bob" "mel" "sideshow-ws2" )
separator="," # defined empty for the first value
for v in "${WORKSPACES2[#]}"
do
available=`df -m /export/ws/$v | awk '{if (NR!=1) {print $3}}'`
used=`df -m /export/ws/$v | awk '{if (NR!=1) {print $2}}'`
echo -n "$separator$available$separator$used" >> $OUTPUT_DIR/$HOSTNAME.csv # append, concatenated, the separator and the value to the file
done
produces:
sideshow
09-20-14,bob_avail,bob_used,mel_avail,mel_used,sideshow-ws2_avail,sideshow-ws2_used
,470400,1032124,661826,1032124,43443,1032108
echo -n permits to print text without the linebreak.
To loop over the values of the array, you can use a for-loop:
echo "$TODAY,$HOSTNAME" > $OUTPUT_DIR/$HOSTNAME.csv # with a linebreak
separator="" # defined empty for the first value
for v in "${WORKSPACES[#]}"
do
echo -n "$separator$v" >> $OUTPUT_DIR/$HOSTNAME.csv # append, concatenated, the separator and the value to the file
separator="," # comma for the next values
done
echo >> $OUTPUT_DIR/$HOSTNAME.csv # add a linebreak (if you want it)
I am making a bash script and I have encountered a problem. So let's say I got this
function create_some_array(){
for i in 0 1 2 3 .. 10
do
a[i]=$i
done
}
create_some_array
echo ${a[*]}
Is there any way I can make this work? I have searched quite a lot and nothing I found worked.
I think making the a[] a global variable should work but I can't find something that actually works in my code. Is there any way to return the array from the function to main program?
Thanks in advance
This won't work as expected when there are whitespaces in the arrays:
function create_some_array() {
local -a a=()
for i in $(seq $1 $2); do
a[i]="$i $[$i*$i]"
done
echo ${a[#]}
}
and worse: if you try to get array indices from the outside "a", it turns out to be a scalar:
echo ${!a[#]}
even assignment as an array wont help, as possible quoting is naturally removed by the echo line and evaluation order cannot be manipulated to escape quoting: try
function create_some_array() {
...
echo "${a[#]}"
}
a=($(create_some_array 0 10))
echo ${!a[#]}
Still, printf seems not to help either:
function create_some_array() {
...
printf " \"%s\"" "${a[#]}"
}
seems to produce correct output on one hand:
$ create_some_array 0 3; echo
"0 0" "1 1" "2 4" "3 9"
but assignment doesn't work on the other:
$ b=($(create_some_array 0 3))
$ echo ${!b[#]}
0 1 2 3 4 5 6 7
So my last trick was to do assignment as follows:
$ eval b=("$(create_some_array 0 3)")
$ echo -e "${!b[#]}\n${b[3]}"
0 1 2 3
3 9
Tataaa!
P.S.: printf "%q " "${a[#]}" also works fine...
This works fine as described. The most likely reason it doesn't work in your actual code is because you happen to run it in a subshell:
cat textfile | create_some_array
echo ${a[*]}
would not work, because each element in a pipeline runs in a subshell, and
myvalue=$(create_some_array)
echo ${a[*]}
would not work, since command expansion happens in a subshell.
You can make an array local to a function, and then return it:
function create_some_array(){
local -a a=()
for i in $(seq $1 $2); do
a[i]=$i
done
echo ${a[#]}
}
declare -a a=()
a=$(create_some_array 0 10)
for i in ${a[#]}; do
echo "i = " $i
done
Hi here is my solution:
show(){
local array=()
array+=("hi")
array+=("everything")
array+=("well?")
echo "${array[#]}"
}
for e in $(show);do
echo $e
done
Try this code on: https://www.tutorialspoint.com/execute_bash_online.php
Both these work for me with sh and bash:
arr1=("192.168.3.4" "192.168.3.4" "192.168.3.3")
strArr=$(removeDupes arr1) # strArr is a string
for item in $strArr; do arr2+=("$item"); done # convert it to an array
len2=${#arr2[#]} # get array length
echo "${len2}" # echo length
eval arr3=("$(removeDupes arr1)") # shellcheck does not like this line and won't suppress it but it works
len3=${#arr3[#]} # get array length
echo "${len3}" # echo length
As an aside, the removeDupes function looks like this:
removeDupes() {
arg="$1[#]"
arr=("${!arg}")
len=${#arr[#]}
resultArr=()
# some array manipulation here
echo "${resultArr[#]}"
}
This answer is based on but better explains and simplifies the answers from #Hans and #didierc