I'm using maven-gae-plugin to manage a Google AppEngine project but I don't know how to include the libraries required to use JPA.
Google's documentation says:
The classpath must contain the JARs 'datanucleus-core-*.jar', 'datanucleus-jpa-*', 'datanucleus-enhancer-*.jar', 'asm-*.jar', and 'geronimo-jpa-*.jar' (where * is the appropriate version number of each JAR) from the 'appengine-java-sdk/lib/tools/' directory, as well as all of your data classes.
How can I tell the plugin to put all the jars in the classpath?
So far I just edited the pom.xml file setting gae.version to 1.7.3 (Leaving datanucleus.version to 1.1.5 and I run mvn gae:unpack but I cannot get it to work.
First, I have problems with javax.persistance that is not found. Do I have to add it manually to pom.xml?
If I do it, the development server starts, but I cannot work with the storage: I get the following error:
SEVERE: Found Meta-Data for class com.sharecost.entities.User but this class is not enhanced!! Please enhance the class before running DataNucleus.
I found a solution to the second part of my question. Looking at the POM.xml file I discovered that the all entities are supposed to be in a **/model package.
I still don't know if the manual inclusion of the javax.persistence dependency is actually required.
Related
I would like to read and write some data with Apache Flink 1.11.2 from S3. The documentation recommends to use the presto plugin for checkpoints and the hadoop plugin for pipeline data.
After reading this section you have to copy the plugins from /opt to /plugin. I can find the flink-s3-fs-presto-1.11.2.jar under /opt but there is no flink-s3-fs-hadoop-1.11.2.jar. Where can i find the s3-hadoop plugin for setting up my production environment?
And how can i use these plugins in the IDE? Simply adding these to pom.xml als provided dependencies? And then how can i pass the crentials in IDE?
That is weird I can see that they are both present in the official binaries in opt in 1.11.1. However if You can't find them, You can simply try to get the jars from Maven here and copy them to the required place. Another thing that may work is adding the dependency into the project with compile scope.
Running the job locally is described here. There are various ways of configuring the credentials when running the job in IDE, one might be adding core-site.xml to resources folder with proper configruation.
EDIT:
As for the local execution it was explained here a little bit.
I'm using appengine-sdk 1.9.3.
In devserver, works in Eclipse and Ant normally.
When I deploy (update) to appengine (production environment), I get this error:
event.getResults(): [<pre>Error for /p7/formPanelServlet
java.lang.NoClassDefFoundError: Could not initialize class
com.google.appengine.tools.cloudstorage.oauth.OauthRawGcsServiceFactory
at com.google.appengine.tools.cloudstorage.GcsServiceFactory.createRawGcsService(GcsServiceFactory.java:42)
at com.google.appengine.tools.cloudstorage.GcsServiceFactory.createGcsService(GcsServiceFactory.java:34)
at com.bitvisio.p7.server.FormPanelServlet.<init>(FormPanelServlet.java:27)
At FormPanelServlet.java:27, the code is:
private final GcsService gcsService = GcsServiceFactory
.createGcsService(new RetryParams.Builder()
.initialRetryDelayMillis(10)
.retryMaxAttempts(10)
.totalRetryPeriodMillis(15000)
.build());
I put the lib appengine-gcs-client-0.3.9.jar in war/WEB-INF/lib. I think there is a problem with this lib.
Thanks for help.
Always use tools like Maven or Ivy to resolve dependencies for you. Copying JARs to war/WEB-INF/lib/ directory and editing .classpath file manually will be painful and may not help you always. If you use Eclipse & Google App Engine plugin, use Add Google APIs... as mentioned here - Google Plugin for Eclipse. In my case, adding Cloud Storage API via Google Plugin for Eclipse helped resolve this NoClassDefFoundError.
I had the same problem. I use Ivy to resolve dependencies and always get the latest.integration (with Maven use RELEASE) for revisions.
However I usually ignore transitive libraries. It looks like Google is expanding the API family - at least splitting out discrete functionality.
There are now quite a few transitive dependencies and it seems they released a new version of the GCS client around the same time as 1.9.3.
Getting all dependencies and packaging them in my deployment fixed my issue. I did not have the issue in development which made it more confusing.
You are facing this issue because you are not adding the some of the jar like
google-api-services-storage-v1-rev78-1.22.0.jar download link
joda-time-2.94.jar download link
guava-19.0.jar link to download
you can use the different version of jar according to your appengine-gcs-client jar file.
Note : Add all these jar and build path with the project and problem will get solve.
I have a bundle up and running in Servicemix. I went to my company's repository and downloaded the corresponding JAR to my local machine. I extracted that JAR and found out that this JAR had only one folder META-INF.
Inside this folder, there is a Manifest.mf file and my resources such as Spring configuration file and Camel Context file.
there I got my first question: where are the source files of this JAR i.e. JAVA classes and all. Only thing I saw there was manifest file, pom.xml, another pom properties file and couple of other configuration files for spring and camel.
this led to my next step. I had a local copy of this project in my workspace as well. I build this project locally and found the JAR in target directory of the project.
Now following steps might seem silly but anyway I did little experiment. I extracted this JAR which I found in target and extracted it to see the content. I believed it was a bundle because I used maven-bundle-plugin and there is no way you could tell by looking at a JAR that its just a JAR or an OSGI bundle. ok so I extracted the JAR and guess what this time it did have the compiled java classes.
this is not the end, I did something silly again. I removed the compiled classes from this JAR and made it exactly same as which I copied from my Company's central repository. Now I used a JDK's JAR creation utility to create a JAR.
Now I have two JARS:
one which I downloaded from company's central repo.
another one which I created myself. it has exactly same content as the other one. I even used the same manifest.mf while creating this JAR. (Since I knew Manifest is the backbone of an oSGI Bundle).
I secure copied this bundle in my server's home directory. and finally, I installed this Bundle/JAR in Servicemix using :
install file:path_to_JAR/JAR_FILE_NAME.
it got installed successfully. but when I tried to start this bundle. it could not start. by using display-exception, I saw the exception : it wasnt able to load the beans and could not
initialize the Application Context followed by a more specific exception "ClassNotFound" exception. I understand that it wasnt able to find the classes defined in my application context. BUT WHYYYYYYYYYY?
I did exactly same steps and I checked it multiple times. if mine could not start, why the earlier one is up and running.
It might sound silly for others who have worked in OSGI environment, But now I am starting to re consider especially ServiceMix.
Thanks for any suggestion.
This is nothing about OSGi, it's more something about your application.
As I don't know your project I just can do some assumptions.
First the jar you got from the Company Repository is most likely an "older" version and not the same as your local sources. With Servicemix it's quite possible to just have blueprint or spring xmls in your bundle cause those are valid resources a Camel-Blueprint/Spring extender are able to pick up. Those XMLs are interpreted and if those only make use of standard Camel Components there is no reason to have a single Class inside your bundle.
Now back to your newly created Bundle, obviously you have some new "Code" in your camel-xml which requires not only standard Camel classes but also some Processes you created on your own, now those classes need to stay in the Bundle!
Best just deploy the newly created Bundle with all it's classes. You should rather check what has changed in the camel xml files.
I'm writing a web app using Google AppEngine and Spring MVC. I carefully upgraded to the v2 of the DataNucleus pluging by following these steps: http://code.google.com/p/datanucleus-appengine/wiki/UpgradingToVersionTwo (I use Eclipse).
When I try to run the Enhancer Tool I get following error:
Exception in thread "main" Plugin (Bundle) "org.datanucleus" is already registered. Ensure you dont have multiple JAR versions of the same plugin in the classpath. The URL
"file:/.../eclipse/plugins/com.google.appengine.eclipse.sdkbundle_1.6.4.v201203300216r37/appengine-java-sdk-1.6.4/lib/opt/user/datanucleus/v2/datanucleus-core-3.0.6.jar" is already registered, and you are trying to register an identical plugin located at URL
"file:/.../eclipse/plugins/com.google.appengine.eclipse.sdkbundle_1.6.4.v201203300216r37/appengine-java-sdk-1.6.4/lib/opt/tools/datanucleus/v2/datanucleus-core-3.0.6.jar."
I formatted the message so that you could see the tiny difference, one jar is loaded from "user" directory, the other one from "tools" directory. I don't understand why. In the project build path, there is only the one from "user" and to the DataNucleus configuration I added the one from "tools", just like the howto above suggested.
In other cases I've seen around this message was mostly caused by conflicting versions of datanucleus plugin but it doesn't apply to me. I guess it's just some stupid thing in my case... so what am I doing wrong?
So after all, I didn't read the instructions as carefully as I thought. The problem was really that the jars were there twice, one in the project build path, one in the datanucleus configuration. It shouldn't be in the project build path (or in fact, it shouldn't be in one of them, doesn't matter which one). I added it there automatically when I copied libs to the war directory and I assumed it had to be done. But the instructions clearly say that only jdo-api needs to be in the project build path.
One thing I don't understand though. In one step of the instructions I had to uncheck "use project classpath when running tools" in the DataNuclues configuration. So how is it possible that the plugin was still using the libs configured in the project build path?
I'm creating a GWT app in Google App Engine, and using Google data store. Does anybody else have the problem of the DataNucleus being flakey as all get out?
I can save a class, and DataNucleus will do it's thing just fine. If I change ANYTHING in the class (even adding whitespace) and then save, I get the following error:
DataNucleus Enhancer completed with
success for 0 classes. Timings :
input=37 ms, enhance=0 ms, total=37
ms. Consult the log for full details
DataNucleus Enhancer completed and no
classes were enhanced. Consult the log
for full details
Once I clean my project, DataNucleus is happy again.
Is this common when using eclipse? Is there a workaround?
The DataNucleus Enhancer is invoked by Google's Eclipse plugin. It is their plugin that causes the enhancement. The enhancer itself just does its job, enhancing the classes it is provided with. Nothing "flaky" about the enhancer ...
If you instead use the DataNucleus Eclipse plugin then you can do "on-demand" enhancement, enhancing just before deploy for example.
--Andy (DataNucleus)
I have had a few similar experiences, and needed to clean the project as well. Its not all the time, but I think it happened once or twice a day, when I was regularly using Eclipse with the Google plugins.
I was getting the error "Persistent class x does not seem to have been enhanced" and realized that I changed package names and the GAE plug in is set to enhance only certain classes.
You can change the list of classes that need enhancement in your project properties..Google...App Engine...ORM.
I had the same problem with the eclipse GAE plugin not "always" enhancing my classes so I installed the DataNucleus plugin to force it but I ran into a problem with the autogeneration of SerialVersionUIDs. I got an error saying "errors during build" but there were no compile errors. Uninstalled DataNucleus plugin and I was back to normal. They don't play well together, it seems.
I'm using GAE v1.3.3.1 and I installed DataNucleus eclipse plugin v2.0.2
Cleaning the project works, even if it's not the most elegant solution.
I had the same problem. checking the log file on Eclipse get this message:
Caused by: org.datanucleus.exceptions.NucleusException: Plugin (Bundle)
org.datanucleus.store.appengine" is already registered. Ensure you dont have multiple JAR versions of the same plugin in the classpath. The URL "file:/Users/mmangar/projects/rga/google_sandbox/Sandbox/war/WEB-INF/lib/datanucleus-appengine-1.0.10.final.jar" is already registered, and you are trying to register an identical plugin located at URL "file:/opt/springsource-tool-suite-2.8.0.RELEASE-e3.7.1-macosx-carbon/springsource/sts-2.8.0.RELEASE/plugins/com.google.appengine.eclipse.sdkbundle_1.6.3.v201202290255r37/appengine-java-sdk-1.6.3/lib/user/orm/datanucleus-appengine-1.0.10.final.jar."
I had the same class trying to be loaded twice.
Removing one of the JAR file from my classpath it worked fine.