I'm trying to learn the memory allocation in C using malloc and increasing the size of allocated array using realloc inside a function. I came across this. when I use single variable the code is working well. But when I allocate memory for second variable, it gives me weird output.
Code is below:
#include <stdio.h>
#include<stdlib.h>
#include<string.h>
# define N 3
void padd(int *a){
int sizes = 10*sizeof(int);
a = (void *)realloc(a,sizes);
a[0] = 10;
printf("inside func= %d \n",a[0]);
}
int main()
{
int *d;
int *pA;
int size = N*sizeof(int);
pA = (void *)malloc(size);
//d = (int *)malloc(size);
padd(pA);
printf("outside func= %d",pA[0]);
}
it gives me output:
inside func= 10
outside func= 10
but if I uncomment the //d = (int *)malloc(size); line, It gives me
inside func= 10
outside func= -1368048824
as output.
What might be wrong here?
If realloc can’t extend a buffer in place, it will allocate a new buffer, copy the contents of the old buffer to it, free the old buffer, and return the address of the new buffer (or NULL if it cannot satisfy the request); thus, the value of a can change in padd. However, that change is only applied to the formal parameter a - the actual parameter pA is not affected.
Based on the behavior, it looks like that if you allocate d, it’s allocated immediately after pA such that pA can’t be extended in place, so realloc is creating a new buffer and deallocating the old one, and the old buffer is overwritten before the printf statement in main.
You’ll want to write padd such that any changes to a are reflected in pA - either return the (potentially new) value of a or pass a pointer to pA:
void padd( int **a )
{
size_t sizes = 10 * sizeof (int); // see note 1
int *tmp = realloc( *a, sizes ); // see note 2
if ( tmp )
{
*a = tmp;
(*a)[0] = 10;
printf( "Inside func, (*a)[0] = %d\n", (*a)[0] );
}
else
{
printf ( "Inside func, realloc failed!\n" );
}
}
and you’d call it as
padd( &pA );
Note 1: sizeof has type size_t, not int.
Note 2: Since realloc can potentially return NULL, always assign the result to a temporary value and check it before assigning back to the original variable, otherwise you run the risk of losing access to memory you’ve already allocated. Also, the cast to void * is unnecessary and confusing since you’re assigning the result to an int * variable. Unless you’re compiling this code as C++ or under an ancient K&R C compiler, just leave the cast off completely - otherwise, your cast has to match the type of the thing you’re assigning to, which in this case is int *.
You should either get the new pointer back from padd:
int * padd(int * a){
int sizes = 10*sizeof(int);
a = (void *)realloc(a,sizes);
a[0] = 10;
printf("inside func= %d \n",a[0]);
return a;
}
//...
int main()
{
//...
pA = padd(pA);
//...
}
Or pass a pointer to the pointer:
void padd(int **pA){
int *a = *pA;
int sizes = 10*sizeof(int);
a = (void *)realloc(a,sizes);
a[0] = 10;
printf("inside func= %d \n",a[0]);
*pA = a;
}
//...
int main()
{
//...
padd(&pA);
//...
}
The both your programs have undefined behavior.
The function parameter a
void padd(int *a)
is a local variable of the function that is initialized by the value of the pointer pA used as a function argument in the function call
padd(pA);
You can imagine the function definition and its call the following way
padd(pA);
//...
void padd( /* int *a */ ){
int *a = pA;
int sizes = 10*sizeof(int);
a = (void *)realloc(a,sizes);
a[0] = 10;
printf("inside func= %d \n",a[0]);
}
So as it is seen changing the local variable a within the function padd does not influence on the value stored in the pointer pA because the function deals with a copy of the value of the pointer pA.
To change the original pointer pA within the function you need to pass it to the function by reference.
In C passing by reference means passing an object indirectly through a pointer to it. Thus dereferencing the pointer you will get a direct access to the object.
The function should be declared and defined the following way
int padd( int **a ){
int sizes = 10*sizeof(int);
int *tmp = realloc( *a, size );
int success = tmp != NULL;
if ( success )
{
*a = tmp;
( *a )[0] = 10;
// or **a = 10;
printf("inside func= %d \n", ( *a )[0] );
}
return success;
}
And the function can be called like
if ( padd( &pA () ) printf("outside func= %d",pA[0]);
Pay attention to that to call realloc you should use an intermediate variable because in general the function can return a null pointer. So reassigning the original pointer with a null pointer results in the original value of the pointer will be lost.
Also you should free all the dynamically allocated memory when it is not needed any more
free( pA );
I have this function, I realocate memory, but when i want to read string it doesn't work=>error
Student is a Struct
void insertStudent(Student **myStudents, int *size)
{
int newSize = *size + 1;
*myStudents = (Student*)realloc(myStudents, newSize*sizeof(Student));
printf("Enter your grade: ");
scanf("%f", &(*myStudents)[*size - 1].nota);
printf("Enter your first name: ");
scanf("%s", &(*myStudents)[newSize-1].firstName);
printf("Enter your second name: ");
scanf("%s", &(*myStudents)[*size - 1].lastName);
//Generate a new code
/*int code = rand() % 1+1000;
int ok = 0;
while (ok == 0)
{
ok = 1;
for (int i = 0; i < *size; i++)
if ((*myStudents)[i].cod == code)
{
code = rand() % 1 + 1000;
ok = 0;
}
}*/
(*myStudents)[*size-1].cod = 7;
printf("Your code is: %d. Do not forget it! ", 7);
}
void insertStudent(Student **myStudents, int *size)
{
*myStudents = (Student*)realloc(myStudents, newSize*sizeof(Student));
// ^ <- look here
This is a pointer to a pointer to your students. realloc() expects the pointer to the data originally allocated, so you most certainly have to pass *myStudents here!
Also change the code to use a temporary variable. realloc() may return NULL on error, in which case the original memory is still allocated and you have to free() it.
For calculating the size, it's better to use the expression syntax of sizeof (newSize * sizeof **myStudents) because this prevents errors when later changing the type.
For sizes, you should always use size_t, as this is guaranteed to hold any possible size of an object (int is not ...)
Further side note: converting to and from void * is implicit in C and it's arguably better style not to write this cast explicitly.
All in all, the code should be written like this
void insertStudent(Student **myStudents, size_t *size)
{
size_t newSize = *size + 1;
Student *newStudents = realloc(*myStudents, newSize * sizeof *newStudents);
if (!newStudents)
{
free(*myStudents);
*myStudents = 0;
return; // check for this error in calling code
}
*myStudents = newStudents;
*size = newSize;
// [...]
}
realloc() needs pointer to the memory to be reallocated which is *myStudents and not myStudents.
Change
*myStudents = (Student*)realloc(myStudents, newSize*sizeof(Student));
to
*myStudents = (Student*)realloc(*myStudents, newSize*sizeof(Student));
You are reallocting to myStudents. It is not your intention and it is not possible.
From standard 7.22.3.5
void *realloc(void *ptr, size_t size);
Otherwise, if ptr does not match a pointer earlier returned by a
memory management function, or if the space has been deallocated by a
call to the free or realloc function, the behavior is undefined. If
memory for the new object cannot be allocated, the old object is not
deallocated and its value is unchanged.
Earlier you had undefined behavior, you didn't pass the originally allocated memory's address. Rather you passed a local variable. You had undefined behavior.
Student* t = realloc(*myStudents, newSize*sizeof(Student))
if(t){
*myStudents = t;
(*size)++;
}
else {
perror("realloc failed");
free(*myStudents);
exit(EXIT_FAILURE);
}
Also as you are increasing the memory you should do increase it if the call is successful. Then consistently access *size-1 throughout the code, it is easier to handle and go through.
The right way to do it shown above. In case realloc returns NULL you won't lose the reference to the already allocated memory. Also with this comes the advise to check the return value of realloc. Casting is redundant in this case - don't do it.
In the scanf you can simply write
scanf("%s",(*myStudents)[newSize-1].firstName);
otherwise you were passing char (*)[] it expects char*.
void getFree(void *ptr)
{
if(ptr != NULL)
{
free(ptr);
ptr = NULL;
}
return;
}
int main()
{
char *a;
a=malloc(10);
getFree(a);
if(a==NULL)
printf("it is null");
else
printf("not null");
}
Why is the output of this program not NULL?
Because the pointer is copied by value to your function. You are assigning NULL to the local copy of the variable (ptr). This does not assign it to the original copy.
The memory will still be freed, so you can no longer safely access it, but your original pointer will not be NULL.
This the same as if you were passing an int to a function instead. You wouldn't expect the original int to be edited by that function, unless you were passing a pointer to it.
void setInt(int someValue) {
someValue = 5;
}
int main() {
int someOtherValue = 7;
setInt(someOtherValue);
printf("%i\n", someOtherValue); // You'd expect this to print 7, not 5...
return 0;
}
If you want to null the original pointer, you'll have to pass a pointer-to-pointer:
void getFree(void** ptr) {
/* Note we are dereferencing the outer pointer,
so we're directly editing the original pointer */
if (*ptr != NULL) {
/* The C standard guarantees that free() safely handles NULL,
but I'm leaving the NULL check to make the example more clear.
Remove the "if" check above, in your own code */
free(*ptr);
*ptr = NULL;
}
return;
}
int main() {
char *a;
a = malloc(10);
getFree(&a); /* Pass a pointer-to-pointer */
if (a == NULL) {
printf("it is null");
} else {
printf("not null");
}
return 0;
}
Because the getFree() function takes a copy of the pointer. ptr and c are both pointers, but they are different variables. It's the same reason why this function will output "6":
void Magic(int x)
{
x = 1;
}
void main()
{
int a = 6;
Magic(a);
printf("%d", a);
}
You are passing pointer a by value, so it is not modified by function. It's only a copy of pointer modified within function, the original variable value is not affected.
Update:
If you wanted to make your life easier by replacing freeing + nulling a variable with a single line of code, you need either a macro:
#define MYFREE(x) free(x); x = NULL;
or a function with pointer to pointer argument:
void myfree(void** pp) { free(*pp); *pp = NULL; }
Pointers are stored as integers somewhere in memory.
When you do a = malloc(10);, a has some value, say 0x1.
When you call getFree(a);, the function copies a into void *ptr.
Now a=0x1 and ptr=0x1.
When you do ptr=NULL, only ptr is changed to NULL, but a is still 0x1..
You are passing the pointer By value.. (By default C passes the argument by value) which means you are updating the copy only ..not the real location..for that you might need to use pointer to pointer in C
void getFree(void **ptr)
{
if(*ptr != NULL)
{
free(*ptr);
*ptr = NULL;
}
return;
}
The question has already been answered but if it helps, I can explain it graphically.
You are doing this --> the pointer is copied by value to your function so it points to the array
but instead you want this -->point to the original pointer
As Merlyn Morgan-Graham already said, the way to solve it is to add operators * and &.
When should a double indirection be used in C? Can anyone explain with a example?
What I know is that a double indirection is a pointer to a pointer. Why would I need a pointer to a pointer?
If you want to have a list of characters (a word), you can use char *word
If you want a list of words (a sentence), you can use char **sentence
If you want a list of sentences (a monologue), you can use char ***monologue
If you want a list of monologues (a biography), you can use char ****biography
If you want a list of biographies (a bio-library), you can use char *****biolibrary
If you want a list of bio-libraries (a ??lol), you can use char ******lol
... ...
yes, I know these might not be the best data structures
Usage example with a very very very boring lol
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
int wordsinsentence(char **x) {
int w = 0;
while (*x) {
w += 1;
x++;
}
return w;
}
int wordsinmono(char ***x) {
int w = 0;
while (*x) {
w += wordsinsentence(*x);
x++;
}
return w;
}
int wordsinbio(char ****x) {
int w = 0;
while (*x) {
w += wordsinmono(*x);
x++;
}
return w;
}
int wordsinlib(char *****x) {
int w = 0;
while (*x) {
w += wordsinbio(*x);
x++;
}
return w;
}
int wordsinlol(char ******x) {
int w = 0;
while (*x) {
w += wordsinlib(*x);
x++;
}
return w;
}
int main(void) {
char *word;
char **sentence;
char ***monologue;
char ****biography;
char *****biolibrary;
char ******lol;
//fill data structure
word = malloc(4 * sizeof *word); // assume it worked
strcpy(word, "foo");
sentence = malloc(4 * sizeof *sentence); // assume it worked
sentence[0] = word;
sentence[1] = word;
sentence[2] = word;
sentence[3] = NULL;
monologue = malloc(4 * sizeof *monologue); // assume it worked
monologue[0] = sentence;
monologue[1] = sentence;
monologue[2] = sentence;
monologue[3] = NULL;
biography = malloc(4 * sizeof *biography); // assume it worked
biography[0] = monologue;
biography[1] = monologue;
biography[2] = monologue;
biography[3] = NULL;
biolibrary = malloc(4 * sizeof *biolibrary); // assume it worked
biolibrary[0] = biography;
biolibrary[1] = biography;
biolibrary[2] = biography;
biolibrary[3] = NULL;
lol = malloc(4 * sizeof *lol); // assume it worked
lol[0] = biolibrary;
lol[1] = biolibrary;
lol[2] = biolibrary;
lol[3] = NULL;
printf("total words in my lol: %d\n", wordsinlol(lol));
free(lol);
free(biolibrary);
free(biography);
free(monologue);
free(sentence);
free(word);
}
Output:
total words in my lol: 243
One reason is you want to change the value of the pointer passed to a function as the function argument, to do this you require pointer to a pointer.
In simple words, Use ** when you want to preserve (OR retain change in) the Memory-Allocation or Assignment even outside of a function call. (So, Pass such function with double pointer arg.)
This may not be a very good example, but will show you the basic use:
#include <stdio.h>
#include <stdlib.h>
void allocate(int **p)
{
*p = (int *)malloc(sizeof(int));
}
int main()
{
int *p = NULL;
allocate(&p);
*p = 42;
printf("%d\n", *p);
free(p);
}
Let’s say you have a pointer. Its value is an address.
but now you want to change that address.
you could. by doing pointer1 = pointer2, you give pointer1 the address of pointer2.
but! if you do that within a function, and you want the result to persist after the function is done, you need do some extra work. you need a new pointer3 just to point to pointer1. pass pointer3 to the function.
here is an example. look at the output below first, to understand.
#include <stdio.h>
int main()
{
int c = 1;
int d = 2;
int e = 3;
int * a = &c;
int * b = &d;
int * f = &e;
int ** pp = &a; // pointer to pointer 'a'
printf("\n a's value: %x \n", a);
printf("\n b's value: %x \n", b);
printf("\n f's value: %x \n", f);
printf("\n can we change a?, lets see \n");
printf("\n a = b \n");
a = b;
printf("\n a's value is now: %x, same as 'b'... it seems we can, but can we do it in a function? lets see... \n", a);
printf("\n cant_change(a, f); \n");
cant_change(a, f);
printf("\n a's value is now: %x, Doh! same as 'b'... that function tricked us. \n", a);
printf("\n NOW! lets see if a pointer to a pointer solution can help us... remember that 'pp' point to 'a' \n");
printf("\n change(pp, f); \n");
change(pp, f);
printf("\n a's value is now: %x, YEAH! same as 'f'... that function ROCKS!!!. \n", a);
return 0;
}
void cant_change(int * x, int * z){
x = z;
printf("\n ----> value of 'a' is: %x inside function, same as 'f', BUT will it be the same outside of this function? lets see\n", x);
}
void change(int ** x, int * z){
*x = z;
printf("\n ----> value of 'a' is: %x inside function, same as 'f', BUT will it be the same outside of this function? lets see\n", *x);
}
Here is the output: (read this first)
a's value: bf94c204
b's value: bf94c208
f's value: bf94c20c
can we change a?, lets see
a = b
a's value is now: bf94c208, same as 'b'... it seems we can, but can we do it in a function? lets see...
cant_change(a, f);
----> value of 'a' is: bf94c20c inside function, same as 'f', BUT will it be the same outside of this function? lets see
a's value is now: bf94c208, Doh! same as 'b'... that function tricked us.
NOW! lets see if a pointer to a pointer solution can help us... remember that 'pp' point to 'a'
change(pp, f);
----> value of 'a' is: bf94c20c inside function, same as 'f', BUT will it be the same outside of this function? lets see
a's value is now: bf94c20c, YEAH! same as 'f'... that function ROCKS!!!.
Adding to Asha's response, if you use single pointer to the example bellow (e.g. alloc1() ) you will lose the reference to the memory allocated inside the function.
#include <stdio.h>
#include <stdlib.h>
void alloc2(int** p) {
*p = (int*)malloc(sizeof(int));
**p = 10;
}
void alloc1(int* p) {
p = (int*)malloc(sizeof(int));
*p = 10;
}
int main(){
int *p = NULL;
alloc1(p);
//printf("%d ",*p);//undefined
alloc2(&p);
printf("%d ",*p);//will print 10
free(p);
return 0;
}
The reason it occurs like this is that in alloc1 the pointer is passed in by value. So, when it is reassigned to the result of the malloc call inside of alloc1, the change does not pertain to code in a different scope.
I saw a very good example today, from this blog post, as I summarize below.
Imagine you have a structure for nodes in a linked list, which probably is
typedef struct node
{
struct node * next;
....
} node;
Now you want to implement a remove_if function, which accepts a removal criterion rm as one of the arguments and traverses the linked list: if an entry satisfies the criterion (something like rm(entry)==true), its node will be removed from the list. In the end, remove_if returns the head (which may be different from the original head) of the linked list.
You may write
for (node * prev = NULL, * curr = head; curr != NULL; )
{
node * const next = curr->next;
if (rm(curr))
{
if (prev) // the node to be removed is not the head
prev->next = next;
else // remove the head
head = next;
free(curr);
}
else
prev = curr;
curr = next;
}
as your for loop. The message is, without double pointers, you have to maintain a prev variable to re-organize the pointers, and handle the two different cases.
But with double pointers, you can actually write
// now head is a double pointer
for (node** curr = head; *curr; )
{
node * entry = *curr;
if (rm(entry))
{
*curr = entry->next;
free(entry);
}
else
curr = &entry->next;
}
You don't need a prev now because you can directly modify what prev->next pointed to.
To make things clearer, let's follow the code a little bit. During the removal:
if entry == *head: it will be *head (==*curr) = *head->next -- head now points to the pointer of the new heading node. You do this by directly changing head's content to a new pointer.
if entry != *head: similarly, *curr is what prev->next pointed to, and now points to entry->next.
No matter in which case, you can re-organize the pointers in a unified way with double pointers.
1. Basic Concept -
When you declare as follows : -
1. char *ch - (called character pointer)
- ch contains the address of a single character.
- (*ch) will dereference to the value of the character..
2. char **ch -
'ch' contains the address of an Array of character pointers. (as in 1)
'*ch' contains the address of a single character. (Note that it's different from 1, due to difference in declaration).
(**ch) will dereference to the exact value of the character..
Adding more pointers expand the dimension of a datatype, from character to string, to array of strings, and so on... You can relate it to a 1d, 2d, 3d matrix..
So, the usage of pointer depends upon how you declare it.
Here is a simple code..
int main()
{
char **p;
p = (char **)malloc(100);
p[0] = (char *)"Apple"; // or write *p, points to location of 'A'
p[1] = (char *)"Banana"; // or write *(p+1), points to location of 'B'
cout << *p << endl; //Prints the first pointer location until it finds '\0'
cout << **p << endl; //Prints the exact character which is being pointed
*p++; //Increments for the next string
cout << *p;
}
2. Another Application of Double Pointers -
(this would also cover pass by reference)
Suppose you want to update a character from a function. If you try the following : -
void func(char ch)
{
ch = 'B';
}
int main()
{
char ptr;
ptr = 'A';
printf("%c", ptr);
func(ptr);
printf("%c\n", ptr);
}
The output will be AA. This doesn't work, as you have "Passed By Value" to the function.
The correct way to do that would be -
void func( char *ptr) //Passed by Reference
{
*ptr = 'B';
}
int main()
{
char *ptr;
ptr = (char *)malloc(sizeof(char) * 1);
*ptr = 'A';
printf("%c\n", *ptr);
func(ptr);
printf("%c\n", *ptr);
}
Now extend this requirement for updating a string instead of character.
For this, you need to receive the parameter in the function as a double pointer.
void func(char **str)
{
strcpy(str, "Second");
}
int main()
{
char **str;
// printf("%d\n", sizeof(char));
*str = (char **)malloc(sizeof(char) * 10); //Can hold 10 character pointers
int i = 0;
for(i=0;i<10;i++)
{
str = (char *)malloc(sizeof(char) * 1); //Each pointer can point to a memory of 1 character.
}
strcpy(str, "First");
printf("%s\n", str);
func(str);
printf("%s\n", str);
}
In this example, method expects a double pointer as a parameter to update the value of a string.
Pointers to pointers also come in handy as "handles" to memory where you want to pass around a "handle" between functions to re-locatable memory. That basically means that the function can change the memory that is being pointed to by the pointer inside the handle variable, and every function or object that is using the handle will properly point to the newly relocated (or allocated) memory. Libraries like to-do this with "opaque" data-types, that is data-types were you don't have to worry about what they're doing with the memory being pointed do, you simply pass around the "handle" between the functions of the library to perform some operations on that memory ... the library functions can be allocating and de-allocating the memory under-the-hood without you having to explicitly worry about the process of memory management or where the handle is pointing.
For instance:
#include <stdlib.h>
typedef unsigned char** handle_type;
//some data_structure that the library functions would work with
typedef struct
{
int data_a;
int data_b;
int data_c;
} LIB_OBJECT;
handle_type lib_create_handle()
{
//initialize the handle with some memory that points to and array of 10 LIB_OBJECTs
handle_type handle = malloc(sizeof(handle_type));
*handle = malloc(sizeof(LIB_OBJECT) * 10);
return handle;
}
void lib_func_a(handle_type handle) { /*does something with array of LIB_OBJECTs*/ }
void lib_func_b(handle_type handle)
{
//does something that takes input LIB_OBJECTs and makes more of them, so has to
//reallocate memory for the new objects that will be created
//first re-allocate the memory somewhere else with more slots, but don't destroy the
//currently allocated slots
*handle = realloc(*handle, sizeof(LIB_OBJECT) * 20);
//...do some operation on the new memory and return
}
void lib_func_c(handle_type handle) { /*does something else to array of LIB_OBJECTs*/ }
void lib_free_handle(handle_type handle)
{
free(*handle);
free(handle);
}
int main()
{
//create a "handle" to some memory that the library functions can use
handle_type my_handle = lib_create_handle();
//do something with that memory
lib_func_a(my_handle);
//do something else with the handle that will make it point somewhere else
//but that's invisible to us from the standpoint of the calling the function and
//working with the handle
lib_func_b(my_handle);
//do something with new memory chunk, but you don't have to think about the fact
//that the memory has moved under the hood ... it's still pointed to by the "handle"
lib_func_c(my_handle);
//deallocate the handle
lib_free_handle(my_handle);
return 0;
}
Hope this helps,
Jason
Strings are a great example of uses of double pointers. The string itself is a pointer, so any time you need to point to a string, you'll need a double pointer.
Simple example that you probably have seen many times before
int main(int argc, char **argv)
In the second parameter you have it: pointer to pointer to char.
Note that the pointer notation (char* c) and the array notation (char c[]) are interchangeable in function arguments. So you could also write char *argv[]. In other words char *argv[] and char **argv are interchangeable.
What the above represents is in fact an array of character sequences (the command line arguments that are given to a program at startup).
See also this answer for more details about the above function signature.
A little late to the party, but hopefully this will help someone.
In C arrays always allocate memory on the stack, thus a function can't return
a (non-static) array due to the fact that memory allocated on the stack
gets freed automatically when the execution reaches the end of the current block.
That's really annoying when you want to deal with two-dimensional arrays
(i.e. matrices) and implement a few functions that can alter and return matrices.
To achieve this, you could use a pointer-to-pointer to implement a matrix with
dynamically allocated memory:
/* Initializes a matrix */
double** init_matrix(int num_rows, int num_cols){
// Allocate memory for num_rows float-pointers
double** A = calloc(num_rows, sizeof(double*));
// return NULL if the memory couldn't allocated
if(A == NULL) return NULL;
// For each double-pointer (row) allocate memory for num_cols floats
for(int i = 0; i < num_rows; i++){
A[i] = calloc(num_cols, sizeof(double));
// return NULL if the memory couldn't allocated
// and free the already allocated memory
if(A[i] == NULL){
for(int j = 0; j < i; j++){
free(A[j]);
}
free(A);
return NULL;
}
}
return A;
}
Here's an illustration:
double** double* double
------------- ---------------------------------------------------------
A ------> | A[0] | ----> | A[0][0] | A[0][1] | A[0][2] | ........ | A[0][cols-1] |
| --------- | ---------------------------------------------------------
| A[1] | ----> | A[1][0] | A[1][1] | A[1][2] | ........ | A[1][cols-1] |
| --------- | ---------------------------------------------------------
| . | .
| . | .
| . | .
| --------- | ---------------------------------------------------------
| A[i] | ----> | A[i][0] | A[i][1] | A[i][2] | ........ | A[i][cols-1] |
| --------- | ---------------------------------------------------------
| . | .
| . | .
| . | .
| --------- | ---------------------------------------------------------
| A[rows-1] | ----> | A[rows-1][0] | A[rows-1][1] | ... | A[rows-1][cols-1] |
------------- ---------------------------------------------------------
The double-pointer-to-double-pointer A points to the first element A[0] of a
memory block whose elements are double-pointers itself. You can imagine these
double-pointers as the rows of the matrix. That's the reason why every
double-pointer allocates memory for num_cols elements of type double.
Furthermore A[i] points to the i-th row, i.e. A[i] points to A[i][0] and
that's just the first double-element of the memory block for the i-th row.
Finally, you can access the element in the i-th row
and j-th column easily with A[i][j].
Here's a complete example that demonstrates the usage:
#include <stdio.h>
#include <stdlib.h>
#include <time.h>
/* Initializes a matrix */
double** init_matrix(int num_rows, int num_cols){
// Allocate memory for num_rows double-pointers
double** matrix = calloc(num_rows, sizeof(double*));
// return NULL if the memory couldn't allocated
if(matrix == NULL) return NULL;
// For each double-pointer (row) allocate memory for num_cols
// doubles
for(int i = 0; i < num_rows; i++){
matrix[i] = calloc(num_cols, sizeof(double));
// return NULL if the memory couldn't allocated
// and free the already allocated memory
if(matrix[i] == NULL){
for(int j = 0; j < i; j++){
free(matrix[j]);
}
free(matrix);
return NULL;
}
}
return matrix;
}
/* Fills the matrix with random double-numbers between -1 and 1 */
void randn_fill_matrix(double** matrix, int rows, int cols){
for (int i = 0; i < rows; ++i){
for (int j = 0; j < cols; ++j){
matrix[i][j] = (double) rand()/RAND_MAX*2.0-1.0;
}
}
}
/* Frees the memory allocated by the matrix */
void free_matrix(double** matrix, int rows, int cols){
for(int i = 0; i < rows; i++){
free(matrix[i]);
}
free(matrix);
}
/* Outputs the matrix to the console */
void print_matrix(double** matrix, int rows, int cols){
for(int i = 0; i < rows; i++){
for(int j = 0; j < cols; j++){
printf(" %- f ", matrix[i][j]);
}
printf("\n");
}
}
int main(){
srand(time(NULL));
int m = 3, n = 3;
double** A = init_matrix(m, n);
randn_fill_matrix(A, m, n);
print_matrix(A, m, n);
free_matrix(A, m, n);
return 0;
}
For example, you might want to make sure that when you free the memory of something you set the pointer to null afterwards.
void safeFree(void** memory) {
if (*memory) {
free(*memory);
*memory = NULL;
}
}
When you call this function you'd call it with the address of a pointer
void* myMemory = someCrazyFunctionThatAllocatesMemory();
safeFree(&myMemory);
Now myMemory is set to NULL and any attempt to reuse it will be very obviously wrong.
For instance if you want random access to noncontiguous data.
p -> [p0, p1, p2, ...]
p0 -> data1
p1 -> data2
-- in C
T ** p = (T **) malloc(sizeof(T*) * n);
p[0] = (T*) malloc(sizeof(T));
p[1] = (T*) malloc(sizeof(T));
You store a pointer p that points to an array of pointers. Each pointer points to a piece of data.
If sizeof(T) is big it may not be possible to allocate a contiguous block (ie using malloc) of sizeof(T) * n bytes.
One thing I use them for constantly is when I have an array of objects and I need to perform lookups (binary search) on them by different fields.
I keep the original array...
int num_objects;
OBJECT *original_array = malloc(sizeof(OBJECT)*num_objects);
Then make an array of sorted pointers to the objects.
int compare_object_by_name( const void *v1, const void *v2 ) {
OBJECT *o1 = *(OBJECT **)v1;
OBJECT *o2 = *(OBJECT **)v2;
return (strcmp(o1->name, o2->name);
}
OBJECT **object_ptrs_by_name = malloc(sizeof(OBJECT *)*num_objects);
int i = 0;
for( ; i<num_objects; i++)
object_ptrs_by_name[i] = original_array+i;
qsort(object_ptrs_by_name, num_objects, sizeof(OBJECT *), compare_object_by_name);
You can make as many sorted pointer arrays as you need, then use a binary search on the sorted pointer array to access the object you need by the data you have. The original array of objects can stay unsorted, but each pointer array will be sorted by their specified field.
Why double pointers?
The objective is to change what studentA points to, using a function.
#include <stdio.h>
#include <stdlib.h>
typedef struct Person{
char * name;
} Person;
/**
* we need a ponter to a pointer, example: &studentA
*/
void change(Person ** x, Person * y){
*x = y; // since x is a pointer to a pointer, we access its value: a pointer to a Person struct.
}
void dontChange(Person * x, Person * y){
x = y;
}
int main()
{
Person * studentA = (Person *)malloc(sizeof(Person));
studentA->name = "brian";
Person * studentB = (Person *)malloc(sizeof(Person));
studentB->name = "erich";
/**
* we could have done the job as simple as this!
* but we need more work if we want to use a function to do the job!
*/
// studentA = studentB;
printf("1. studentA = %s (not changed)\n", studentA->name);
dontChange(studentA, studentB);
printf("2. studentA = %s (not changed)\n", studentA->name);
change(&studentA, studentB);
printf("3. studentA = %s (changed!)\n", studentA->name);
return 0;
}
/**
* OUTPUT:
* 1. studentA = brian (not changed)
* 2. studentA = brian (not changed)
* 3. studentA = erich (changed!)
*/
The following is a very simple C++ example that shows that if you want to use a function to set a pointer to point to an object, you need a pointer to a pointer. Otherwise, the pointer will keep reverting to null.
(A C++ answer, but I believe it's the same in C.)
(Also, for reference: Google("pass by value c++") = "By default, arguments in C++ are passed by value. When an argument is passed by value, the argument's value is copied into the function's parameter.")
So we want to set the pointer b equal to the string a.
#include <iostream>
#include <string>
void Function_1(std::string* a, std::string* b) {
b = a;
std::cout << (b == nullptr); // False
}
void Function_2(std::string* a, std::string** b) {
*b = a;
std::cout << (b == nullptr); // False
}
int main() {
std::string a("Hello!");
std::string* b(nullptr);
std::cout << (b == nullptr); // True
Function_1(&a, b);
std::cout << (b == nullptr); // True
Function_2(&a, &b);
std::cout << (b == nullptr); // False
}
// Output: 10100
What happens at the line Function_1(&a, b);?
The "value" of &main::a (an address) is copied into the parameter std::string* Function_1::a. Therefore Function_1::a is a pointer to (i.e. the memory address of) the string main::a.
The "value" of main::b (an address in memory) is copied into the parameter std::string* Function_1::b. Therefore there are now 2 of these addresses in memory, both null pointers. At the line b = a;, the local variable Function_1::b is then changed to equal Function_1::a (= &main::a), but the variable main::b is unchanged. After the call to Function_1, main::b is still a null pointer.
What happens at the line Function_2(&a, &b);?
The treatment of the a variable is the same: within the function, Function_2::a is the address of the string main::a.
But the variable b is now being passed as a pointer to a pointer. The "value" of &main::b (the address of the pointer main::b) is copied into std::string** Function_2::b. Therefore within Function_2, dereferencing this as *Function_2::b will access and modify main::b . So the line *b = a; is actually setting main::b (an address) equal to Function_2::a (= address of main::a) which is what we want.
If you want to use a function to modify a thing, be it an object or an address (pointer), you have to pass in a pointer to that thing. The thing that you actually pass in cannot be modified (in the calling scope) because a local copy is made.
(An exception is if the parameter is a reference, such as std::string& a. But usually these are const. Generally, if you call f(x), if x is an object you should be able to assume that f won't modify x. But if x is a pointer, then you should assume that f might modify the object pointed to by x.)
Compare modifying value of variable versus modifying value of pointer:
#include <stdio.h>
#include <stdlib.h>
void changeA(int (*a))
{
(*a) = 10;
}
void changeP(int *(*P))
{
(*P) = malloc(sizeof((*P)));
}
int main(void)
{
int A = 0;
printf("orig. A = %d\n", A);
changeA(&A);
printf("modi. A = %d\n", A);
/*************************/
int *P = NULL;
printf("orig. P = %p\n", P);
changeP(&P);
printf("modi. P = %p\n", P);
free(P);
return EXIT_SUCCESS;
}
This helped me to avoid returning value of pointer when the pointer was modified by the called function (used in singly linked list).
OLD (bad):
int *func(int *P)
{
...
return P;
}
int main(void)
{
int *pointer;
pointer = func(pointer);
...
}
NEW (better):
void func(int **pointer)
{
...
}
int main(void)
{
int *pointer;
func(&pointer);
...
}
Most of the answers here are more or less related to application programming. Here is an example from embedded systems programming. For example below is an excerpt from the reference manual of NXP's Kinetis KL13 series microcontroller, this code snippet is used to run bootloader, which resides in ROM, from firmware:
"
To get the address of the entry point, the user application reads the word containing the pointer to the bootloader API tree at offset 0x1C of the bootloader's vector table. The vector table is placed at the base of the bootloader's address range, which for the ROM is 0x1C00_0000. Thus, the API tree pointer is at address 0x1C00_001C.
The bootloader API tree is a structure that contains pointers to other structures, which have the function and data addresses for the bootloader. The bootloader entry point is always the first word of the API tree.
"
uint32_t runBootloaderAddress;
void (*runBootloader)(void * arg);
// Read the function address from the ROM API tree.
runBootloaderAddress = **(uint32_t **)(0x1c00001c);
runBootloader = (void (*)(void * arg))runBootloaderAddress;
// Start the bootloader.
runBootloader(NULL);
I have used double pointers today while I was programming something for work, so I can answer why we had to use them (it's the first time I actually had to use double pointers). We had to deal with real time encoding of frames contained in buffers which are members of some structures. In the encoder we had to use a pointer to one of those structures. The problem was that our pointer was being changed to point to other structures from another thread. In order to use the current structure in the encoder, I had to use a double pointer, in order to point to the pointer that was being modified in another thread. It wasn't obvious at first, at least for us, that we had to take this approach. A lot of address were printed in the process :)).
You SHOULD use double pointers when you work on pointers that are changed in other places of your application. You might also find double pointers to be a must when you deal with hardware that returns and address to you.