This is a very difficult problem about how to maneuver a spaceship that can both translate and rotate in 3D, for a space game.
The spaceship has n jets placing in various positions and directions.
Transformation of i-th jet relative to the CM of spaceship is constant = Ti.
Transformation is a tuple of position and orientation (quaternion or matrix 3x3 or, less preferable, Euler angles).
A transformation can also be denoted by a single matrix 4x4.
In other words, all jet are glued to the ship and cannot rotate.
A jet can exert force to the spaceship only in direction of its axis (green).
As a result of glue, the axis rotated along with the spaceship.
All jets can exert force (vector,Fi) at a certain magnitude (scalar,fi) :
i-th jet can exert force (Fi= axis x fi) only within range min_i<= fi <=max_i.
Both min_i and max_i are constant with known value.
To be clear, unit of min_i,fi,max_i is Newton.
Ex. If the range doesn't cover 0, it means that the jet can't be turned off.
The spaceship's mass = m and inertia tensor = I.
The spaceship's current transformation = Tran0, velocity = V0, angularVelocity = W0.
The spaceship physic body follows well-known physic rules :-
Torque=r x F
F=ma
angularAcceleration = I^-1 x Torque
linearAcceleration = m^-1 x F
I is different for each direction, but for the sake of simplicity, it has the same value for every direction (sphere-like). Thus, I can be thought as a scalar instead of matrix 3x3.
Question
How to control all jets (all fi) to land the ship with position=0 and angle=0?
Math-like specification: Find function of fi(time) that take minimum time to reach position=(0,0,0), orient=identity with final angularVelocity and velocity = zero.
More specifically, what are names of technique or related algorithms to solve this problem?
My research (1 dimension)
If the universe is 1D (thus, no rotation), the problem will be easy to solve.
( Thank Gavin Lock, https://stackoverflow.com/a/40359322/3577745 )
First, find the value MIN_BURN=sum{min_i}/m and MAX_BURN=sum{max_i}/m.
Second, think in opposite way, assume that x=0 (position) and v=0 at t=0,
then create two parabolas with x''=MIN_BURN and x''=MAX_BURN.
(The 2nd derivative is assumed to be constant for a period of time, so it is parabola.)
The only remaining work is to join two parabolas together.
The red dash line is where them join.
In the period of time that x''=MAX_BURN, all fi=max_i.
In the period of time that x''=MIN_BURN, all fi=min_i.
It works really well for 1D, but in 3D, the problem is far more harder.
Note:
Just a rough guide pointing me to a correct direction is really appreciated.
I don't need a perfect AI, e.g. it can take a little more time than optimum.
I think about it for more than 1 week, still find no clue.
Other attempts / opinions
I don't think machine learning like neural network is appropriate for this case.
Boundary-constrained-least-square-optimisation may be useful but I don't know how to fit my two hyper-parabola to that form of problem.
This may be solved by using many iterations, but how?
I have searched NASA's website, but not find anything useful.
The feature may exist in "Space Engineer" game.
Commented by Logman: Knowledge in mechanical engineering may help.
Commented by AndyG: It is a motion planning problem with nonholonomic constraints. It could be solved by Rapidly exploring random tree (RRTs), theory around Lyapunov equation, and Linear quadratic regulator.
Commented by John Coleman: This seems more like optimal control than AI.
Edit: "Near-0 assumption" (optional)
In most case, AI (to be designed) run continuously (i.e. called every time-step).
Thus, with the AI's tuning, Tran0 is usually near-identity, V0 and W0 are usually not so different from 0, e.g. |Seta0|<30 degree,|W0|<5 degree per time-step .
I think that AI based on this assumption would work OK in most case. Although not perfect, it can be considered as a correct solution (I started to think that without this assumption, this question might be too hard).
I faintly feel that this assumption may enable some tricks that use some "linear"-approximation.
The 2nd Alternative Question - "Tune 12 Variables" (easier)
The above question might also be viewed as followed :-
I want to tune all six values and six values' (1st-derivative) to be 0, using lowest amount of time-steps.
Here is a table show a possible situation that AI can face:-
The Multiplier table stores inertia^-1 * r and mass^-1 from the original question.
The Multiplier and Range are constant.
Each timestep, the AI will be asked to pick a tuple of values fi that must be in the range [min_i,max_i] for every i+1-th jet.
Ex. From the table, AI can pick (f0=1,f1=0.1,f2=-1).
Then, the caller will use fi to multiply with the Multiplier table to get values''.
Px'' = f0*0.2+f1*0.0+f2*0.7
Py'' = f0*0.3-f1*0.9-f2*0.6
Pz'' = ....................
SetaX''= ....................
SetaY''= ....................
SetaZ''= f0*0.0+f1*0.0+f2*5.0
After that, the caller will update all values' with formula values' += values''.
Px' += Px''
.................
SetaZ' += SetaZ''
Finally, the caller will update all values with formula values += values'.
Px += Px'
.................
SetaZ += SetaZ'
AI will be asked only once for each time-step.
The objective of AI is to return tuples of fi (can be different for different time-step), to make Px,Py,Pz,SetaX,SetaY,SetaZ,Px',Py',Pz',SetaX',SetaY',SetaZ' = 0 (or very near),
by using least amount of time-steps as possible.
I hope providing another view of the problem will make it easier.
It is not the exact same problem, but I feel that a solution that can solve this version can bring me very close to the answer of the original question.
An answer for this alternate question can be very useful.
The 3rd Alternative Question - "Tune 6 Variables" (easiest)
This is a lossy simplified version of the previous alternative.
The only difference is that the world is now 2D, Fi is also 2D (x,y).
Thus I have to tune only Px,Py,SetaZ,Px',Py',SetaZ'=0, by using least amount of time-steps as possible.
An answer to this easiest alternative question can be considered useful.
I'll try to keep this short and sweet.
One approach that is often used to solve these problems in simulation is a Rapidly-Exploring Random Tree. To give at least a little credibility to my post, I'll admit I studied these, and motion planning was my research lab's area of expertise (probabilistic motion planning).
The canonical paper to read on these is Steven LaValle's Rapidly-exploring random trees: A new tool for path planning, and there have been a million papers published since that all improve on it in some way.
First I'll cover the most basic description of an RRT, and then I'll describe how it changes when you have dynamical constraints. I'll leave fiddling with it afterwards up to you:
Terminology
"Spaces"
The state of your spaceship can be described by its 3-dimension position (x, y, z) and its 3-dimensional rotation (alpha, beta, gamma) (I use those greek names because those are the Euler angles).
state space is all possible positions and rotations your spaceship can inhabit. Of course this is infinite.
collision space are all of the "invalid" states. i.e. realistically impossible positions. These are states where your spaceship is in collision with some obstacle (With other bodies this would also include collision with itself, for example planning for a length of chain). Abbreviated as C-Space.
free space is anything that is not collision space.
General Approach (no dynamics constraints)
For a body without dynamical constraints the approach is fairly straightforward:
Sample a state
Find nearest neighbors to that state
Attempt to plan a route between the neighbors and the state
I'll briefly discuss each step
Sampling a state
Sampling a state in the most basic case means choosing at random values for each entry in your state space. If we did this with your space ship, we'd randomly sample for x, y, z, alpha, beta, gamma across all of their possible values (uniform random sampling).
Of course way more of your space is obstacle space than free space typically (because you usually confine your object in question to some "environment" you want to move about inside of). So what is very common to do is to take the bounding cube of your environment and sample positions within it (x, y, z), and now we have a lot higher chance to sample in the free space.
In an RRT, you'll sample randomly most of the time. But with some probability you will actually choose your next sample to be your goal state (play with it, start with 0.05). This is because you need to periodically test to see if a path from start to goal is available.
Finding nearest neighbors to a sampled state
You chose some fixed integer > 0. Let's call that integer k. Your k nearest neighbors are nearby in state space. That means you have some distance metric that can tell you how far away states are from each other. The most basic distance metric is Euclidean distance, which only accounts for physical distance and doesn't care about rotational angles (because in the simplest case you can rotate 360 degrees in a single timestep).
Initially you'll only have your starting position, so it will be the only candidate in the nearest neighbor list.
Planning a route between states
This is called local planning. In a real-world scenario you know where you're going, and along the way you need to dodge other people and moving objects. We won't worry about those things here. In our planning world we assume the universe is static but for us.
What's most common is to assume some linear interpolation between the sampled state and its nearest neighbor. The neighbor (i.e. a node already in the tree) is moved along this linear interpolation bit by bit until it either reaches the sampled configuration, or it travels some maximum distance (recall your distance metric).
What's going on here is that your tree is growing towards the sample. When I say that you step "bit by bit" I mean you define some "delta" (a really small value) and move along the linear interpolation that much each timestep. At each point you check to see if you the new state is in collision with some obstacle. If you hit an obstacle, you keep the last valid configuration as part of the tree (don't forget to store the edge somehow!) So what you'll need for a local planner is:
Collision checking
how to "interpolate" between two states (for your problem you don't need to worry about this because we'll do something different).
A physics simulation for timestepping (Euler integration is quite common, but less stable than something like Runge-Kutta. Fortunately you already have a physics model!
Modification for dynamical constraints
Of course if we assume you can linearly interpolate between states, we'll violate the physics you've defined for your spaceship. So we modify the RRT as follows:
Instead of sampling random states, we sample random controls and apply said controls for a fixed time period (or until collision).
Before, when we sampled random states, what we were really doing was choosing a direction (in state space) to move. Now that we have constraints, we randomly sample our controls, which is effectively the same thing, except we're guaranteed not to violate our constraints.
After you apply your control for a fixed time interval (or until collision), you add a node to the tree, with the control stored on the edge. Your tree will grow very fast to explore the space. This control application replaces linear interpolation between tree states and sampled states.
Sampling the controls
You have n jets that individually have some min and max force they can apply. Sample within that min and max force for each jet.
Which node(s) do I apply my controls to?
Well you can choose at random, or your can bias the selection to choose nodes that are nearest to your goal state (need the distance metric). This biasing will try to grow nodes closer to the goal over time.
Now, with this approach, you're unlikely to exactly reach your goal, so you need to define some definition of "close enough". That is, you will use your distance metric to find nearest neighbors to your goal state, and then test them for "close enough". This "close enough" metric can be different than your distance metric, or not. If you're using Euclidean distance, but it's very important that you goal configuration is also rotated properly, then you may want to modify the "close enough" metric to look at angle differences.
What is "close enough" is entirely up to you. Also something for you to tune, and there are a million papers that try to get you a lot closer in the first place.
Conclusion
This random sampling may sound ridiculous, but your tree will grow to explore your free space very quickly. See some youtube videos on RRT for path planning. We can't guarantee something called "probabilistic completeness" with dynamical constraints, but it's usually "good enough". Sometimes it'll be possible that a solution does not exist, so you'll need to put some logic in there to stop growing the tree after a while (20,000 samples for example)
More Resources:
Start with these, and then start looking into their citations, and then start looking into who is citing them.
Kinodynamic RRT*
RRT-Connect
This is not an answer, but it's too long to place as a comment.
First of all, a real solution will involve both linear programming (for multivariate optimization with constraints that will be used in many of the substeps) as well as techniques used in trajectory optimization and/or control theory. This is a very complex problem and if you can solve it, you could have a job at any company of your choosing. The only thing that could make this problem worse would be friction (drag) effects or external body gravitation effects. A real solution would also ideally use Verlet integration or 4th order Runge Kutta, which offer improvements over the Euler integration you've implemented here.
Secondly, I believe your "2nd Alternative Version" of your question above has omitted the rotational influence on the positional displacement vector you add into the position at each timestep. While the jet axes all remain fixed relative to the frame of reference of the ship, they do not remain fixed relative to the global coordinate system you are using to land the ship (at global coordinate [0, 0, 0]). Therefore the [Px', Py', Pz'] vector (calculated from the ship's frame of reference) must undergo appropriate rotation in all 3 dimensions prior to being applied to the global position coordinates.
Thirdly, there are some implicit assumptions you failed to specify. For example, one dimension should be defined as the "landing depth" dimension and negative coordinate values should be prohibited (unless you accept a fiery crash). I developed a mockup model for this in which I assumed z dimension to be the landing dimension. This problem is very sensitive to initial state and the constraints placed on the jets. All of my attempts using your example initial conditions above failed to land. For example, in my mockup (without the 3d displacement vector rotation noted above), the jet constraints only allow for rotation in one direction on the z-axis. So if aZ becomes negative at any time (which is often the case) the ship is actually forced to complete another full rotation on that axis before it can even try to approach zero degrees again. Also, without the 3d displacement vector rotation, you will find that Px will only go negative using your example initial conditions and constraints, and the ship is forced to either crash or diverge farther and farther onto the negative x-axis as it attempts to maneuver. The only way to solve this is to truly incorporate rotation or allow for sufficient positive and negative jet forces.
However, even when I relaxed your min/max force constraints, I was unable to get my mockup to land successfully, demonstrating how complex planning will probably be required here. Unless it is possible to completely formulate this problem in linear programming space, I believe you will need to incorporate advanced planning or stochastic decision trees that are "smart" enough to continually use rotational methods to reorient the most flexible jets onto the currently most necessary axes.
Lastly, as I noted in the comments section, "On May 14, 2015, the source code for Space Engineers was made freely available on GitHub to the public." If you believe that game already contains this logic, that should be your starting place. However, I suspect you are bound to be disappointed. Most space game landing sequences simply take control of the ship and do not simulate "real" force vectors. Once you take control of a 3-d model, it is very easy to predetermine a 3d spline with rotation that will allow the ship to land softly and with perfect bearing at the predetermined time. Why would any game programmer go through this level of work for a landing sequence? This sort of logic could control ICBM missiles or planetary rover re-entry vehicles and it is simply overkill IMHO for a game (unless the very purpose of the game is to see if you can land a damaged spaceship with arbitrary jets and constraints without crashing).
I can introduce another technique into the mix of (awesome) answers proposed.
It lies more in AI, and provides close-to-optimal solutions. It's called Machine Learning, more specifically Q-Learning. It's surprisingly easy to implement but hard to get right.
The advantage is that the learning can be done offline, so the algorithm can then be super fast when used.
You could do the learning when the ship is built or when something happens to it (thruster destruction, large chunks torn away...).
Optimality
I observed you're looking for near-optimal solutions. Your method with parabolas is good for optimal control. What you did is this:
Observe the state of the system.
For every state (coming in too fast, too slow, heading away, closing in etc.) you devised an action (apply a strategy) that will bring the system into a state closer to the goal.
Repeat
This is pretty much intractable for a human in 3D (too many cases, will drive you nuts) however a machine may learn where to split the parabolas in every dimensions, and devise an optimal strategy by itself.
THe Q-learning works very similarly to us:
Observe the (secretized) state of the system
Select an action based on a strategy
If this action brought the system into a desirable state (closer to the goal), mark the action/initial state as more desirable
Repeat
Discretize your system's state.
For each state, have a map intialized quasi-randomly, which maps every state to an Action (this is the strategy). Also assign a desirability to each state (initially, zero everywhere and 1000000 to the target state (X=0, V=0).
Your state would be your 3 positions, 3 angles, 3translation speed, and three rotation speed.
Your actions can be any combination of thrusters
Training
Train the AI (offline phase):
Generate many diverse situations
Apply the strategy
Evaluate the new state
Let the algo (see links above) reinforce the selected strategies' desirability value.
Live usage in the game
After some time, a global strategy for navigation emerges. You then store it, and during your game loop you simply sample your strategy and apply it to each situation as they come up.
The strategy may still learn during this phase, but probably more slowly (because it happens real-time). (Btw, I dream of a game where the AI would learn from every user's feedback so we could collectively train it ^^)
Try this in a simple 1D problem, it devises a strategy remarkably quickly (a few seconds).
In 2D I believe excellent results could be obtained in an hour.
For 3D... You're looking at overnight computations. There's a few thing to try and accelerate the process:
Try to never 'forget' previous computations, and feed them as an initial 'best guess' strategy. Save it to a file!
You might drop some states (like ship roll maybe?) without losing much navigation optimality but increasing computation speed greatly. Maybe change referentials so the ship is always on the X-axis, this way you'll drop x&y dimensions!
States more frequently encountered will have a reliable and very optimal strategy. Maybe normalize the state to make your ship state always close to a 'standard' state?
Typically rotation speeds intervals may be bounded safely (you don't want a ship tumbling wildely, so the strategy will always be to "un-wind" that speed). Of course rotation angles are additionally bounded.
You can also probably discretize non-linearly the positions because farther away from the objective, precision won't affect the strategy much.
For these kind of problems there are two techniques available: bruteforce search and heuristics. Bruteforce means to recognize the problem as a blackbox with input and output parameters and the aim is to get the right input parameters for winning the game. To program such a bruteforce search, the gamephysics runs in a simulation loop (physics simulation) and via stochastic search (minimax, alpha-beta-prunning) every possibility is tried out. The disadvantage of bruteforce search is the high cpu consumption.
The other techniques utilizes knowledge about the game. Knowledge about motion primitives and about evaluation. This knowledge is programmed with normal computerlanguages like C++ or Java. The disadvantage of this idea is, that it is often difficult to grasp the knowledge.
The best practice for solving spaceship navigation is to combine both ideas into a hybrid system. For programming sourcecode for this concrete problem I estimate that nearly 2000 lines of code are necessary. These kind of problems are normaly done within huge projects with many programmers and takes about 6 months.
What is a simple way to see if my low-pass filter is working? I'm in the process of designing a low-pass filter and would like to run tests on it in a relatively straight forward manner.
Presently I open up a WAV file and stick all the samples in a array of ints. I then run the array through the low-pass filter to create a new array. What would an easy way to check if the low-pass filter worked?
All of this is done in C.
You can use a broadband signal such as white noise to measure the frequency response:
generate white noise input signal
pass white noise signal through filter
take FFT of output from filter
compute log magnitude of FFT
plot log magnitude
Rather than coding this all up you can just dump the output from the filter to a text file and then do the analysis in e.g. MATLAB or Octave (hint: use periodogram).
Depends on what you want to test. I'm not a DSP expert, but I know there are different things one could measure about your filter (if that's what you mean by testing).
If the filter is linear then all information of the filter can be found in the impulse response. Read about it here: http://en.wikipedia.org/wiki/Linear_filter
E.g. if you take the Fourier transform of the impulse response, you'll get the frequency response. The frequency response easily tells you if the low-pass filter is worth it's name.
Maybe I underestimate your knowledge about DSP, but I recommend you to read the book on this website: http://www.dspguide.com. It's a very accessible book without difficult math. It's available as a real book, but you can also read it online for free.
EDIT: After reading it I'm convinced that every programmer that ever touches an ADC should definitely have read this book first. I discovered that I did a lot of things the difficult way in past projects that I could have done a thousand times better when I had a little bit more knowledge about DSP. Most of the times an unexperienced programmer is doing DSP without knowing it.
Create two monotone signals, one of a low frequency and one of a high frequency. Then run your filter on the two. If it works, then the low frequency signal should be unmodified whereas the high frequency signal will be filtered out.
Like Bart above mentioned.
If it's LTI system, I would insert impulse and record the samples and perform FFT using matlab and plot magnitude.
You ask why?
In time domain, you have to convolute the input x(t) with the impulse response d(t) to get the transfer function which is tedious.
y(t) = x(t) * d(t)
In frequency domain, convolution becomes simple multiplication.
y(s) = x(s) x d(s)
So, transfer function is y(s)/x(s) = d(s).
That's the reason you take FFT of impulse response to see the behavior of the filter.
You should be able to programmatically generate tones (sine waves) of various frequencies, stuff them into the input array, and then compare the signal energy by summing the squared values of the arrays (and dividing by the length, though that's mathematically not necessary here because the signals should be the same length). The ratio of the output energy to the input energy gives you the filter gain. If your LPF is working correctly, the gain should be close to 1 for low frequencies, close to 0.5 at the bandwidth frequency, and close to zero for high frequencies.
A note: There are various (but essentially the same in spirit) definitions of "bandwidth" and "gain". The method I've suggested should be relatively insensitive to the transient response of the filter because it's essentially averaging the intensity of the signal, though you could improve it by ignoring the first T samples of the input, where T is related to the filter bandwidth. Either way, make sure that the signals are long compared to the inverse of the filter bandwidth.
When I check a digital filter, I compute the magnitude response graph for the filter and plot it. I then generate a linear sweeping sine wave in code or using Audacity, and pass the sweeping sine wave through the filter (taking into account that things might get louder, so the sine wave is quiet enough not to clip) . A visual check is usually enough to assert that the filter is doing what I think it should. If you don't know how to compute the magnitude response I suspect there are tools out there that will compute it for you.
Depending on how certain you want to be, you don't even have to do that. You can just process the linear sweep and see that it attenuated the higher frequencies.
Given is an array of 320 elements (int16), which represent an audio signal (16-bit LPCM) of 20 ms duration. I am looking for a most simple and very fast method which should decide whether this array contains active audio (like speech or music), but not noise or silence. I don't need a very high quality of the decision, but it must be very fast.
It occurred to me first to add all squares or absolute values of the elements and compare their sum with a threshold, but such a method is very slow on my system, even if it is O(n).
You're not going to get much faster than a sum-of-squares approach.
One optimization that you may not be doing so far is to use a running total. That is, in each time step, instead of summing the squares of the last n samples, keep a running total and update that with the square of the most recent sample. To avoid your running total from growing and growing over time, add an exponential decay. In pseudocode:
decay_constant=0.999; // Some suitable value smaller than 1
total=0;
for t=1,...
// Exponential decay
total=total*decay_constant;
// Add in latest sample
total+=current_sample;
if total>threshold
// do something
end
end
Of course, you'll have to tune the decay constant and threshold to suit your application. If this isn't fast enough to run in real time, you have a seriously underpowered DSP...
You might try calculating two simple "statistics" - first would be spread (max-min). Silence will have very low spread. Second would be variety - divide the range of possible values into say 16 brackets (= value range) and as you go through the elements, determine in which bracket that element goes. Noise will have similar numbers for all brackets, whereas music or speech should prefer some of them while neglecting others.
This should be possible to do in just one pass through the array and you do not need complicated arithmetics, just some addition and comparison of values.
Also consider some approximation, for example take only each fourth value, thus reducing the number of checked elements to 80. For audio signal, this should be okay.
I did something like this a while back. After some experimentation I arrived at a solution that worked sufficiently well in my case.
I used the rate of change in the cube of the running average over about 120ms. When there is silence (only noise that is) the expression should be hovering around zero. As soon as the rate starts increasing over a couple of runs, you probably have some action going on.
rate = cur_avg^3 - prev_avg^3
I used a cube because the square just wasn't agressive enough. If the cube is to slow for you, try using the square and a bitshift instead. Hope this helps.
It is clearly that the complexity should be at least O(n). Probably some simple algorithms that calculate some value range are good for the moment but I would look for Voice Activity Detection on web and for related code samples.
I once wrote a Tetris AI that played Tetris quite well. The algorithm I used (described in this paper) is a two-step process.
In the first step, the programmer decides to track inputs that are "interesting" to the problem. In Tetris we might be interested in tracking how many gaps there are in a row because minimizing gaps could help place future pieces more easily. Another might be the average column height because it may be a bad idea to take risks if you're about to lose.
The second step is determining weights associated with each input. This is the part where I used a genetic algorithm. Any learning algorithm will do here, as long as the weights are adjusted over time based on the results. The idea is to let the computer decide how the input relates to the solution.
Using these inputs and their weights we can determine the value of taking any action. For example, if putting the straight line shape all the way in the right column will eliminate the gaps of 4 different rows, then this action could get a very high score if its weight is high. Likewise, laying it flat on top might actually cause gaps and so that action gets a low score.
I've always wondered if there's a way to apply a learning algorithm to the first step, where we find "interesting" potential inputs. It seems possible to write an algorithm where the computer first learns what inputs might be useful, then applies learning to weigh those inputs. Has anything been done like this before? Is it already being used in any AI applications?
In neural networks, you can select 'interesting' potential inputs by finding the ones that have the strongest correlation, positive or negative, with the classifications you're training for. I imagine you can do similarly in other contexts.
I think I might approach the problem you're describing by feeding more primitive data to a learning algorithm. For instance, a tetris game state may be described by the list of occupied cells. A string of bits describing this information would be a suitable input to that stage of the learning algorithm. actually training on that is still challenging; how do you know whether those are useful results. I suppose you could roll the whole algorithm into a single blob, where the algorithm is fed with the successive states of play and the output would just be the block placements, with higher scoring algorithms selected for future generations.
Another choice might be to use a large corpus of plays from other sources; such as recorded plays from human players or a hand-crafted ai, and select the algorithms who's outputs bear a strong correlation to some interesting fact or another from the future play, such as the score earned over the next 10 moves.
Yes, there is a way.
If you choose M selected features there are 2^M subsets, so there is a lot to look at.
I would to the following:
For each subset S
run your code to optimize the weights W
save S and the corresponding W
Then for each pair S-W, you can run G games for each pair and save the score L for each one. Now you have a table like this:
feature1 feature2 feature3 featureM subset_code game_number scoreL
1 0 1 1 S1 1 10500
1 0 1 1 S1 2 6230
...
0 1 1 0 S2 G + 1 30120
0 1 1 0 S2 G + 2 25900
Now you can run some component selection algorithm (PCA for example) and decide which features are worth to explain scoreL.
A tip: When running the code to optimize W, seed the random number generator, so that each different 'evolving brain' is tested against the same piece sequence.
I hope it helps in something!