I'm using Eclipse Juno, trying to get the ARM toolchain working. What I have installed:
Eclipse Juno
Zylin Embedded CDT Plugin
GNU ARM Eclipse plugin
Summon-Arm-Toolchain, installed in the default ~/sat/ directory.
When I create a new C project using the Summon toolchain, the following error appears: 'Program "arm-none-eabi-gcc" not found in path.' The error location is "[Discovery Options] page in project properties." I've tried setting the Eclipse-level (Eclipse->Preferences->C/C++->Build->Environment) PATH and the project-level PATH to include this path, both relatively (~/sat) and absolutely /Users/alterscape/sat), but nothing seems to fix the problem. I've also tried manually adding the full path in the Discovery Options page. Is there a known fix? If not, is there a way to echo $PATH inside Eclipse to see what it thinks its path is?
So, here's the story: Eclipse CDT does NOT automatically re-check errors to see if they go away after you apply changes to your path. You have to manually re-build. This came as a surprise to me because I am used to my Java toolchain checking/updating errors as I make configuration changes. It isn't entirely obvious that you need to re-run Build Project to see if your changes fixed the error, but that's the path forward.
Related
I am using Eclipse for a C project. I created a new Project by going to New->C project->Executable->Empty Project, Linux gcc toolchain.
When I add a new .c file, I get "program 'g++' not found in path".
How do I get rid of this? I'm not even using C++.
I had similar problem and it is solved by
Installing g++ The GNU C++ complier using ubuntu software centre and
Changing in -
Window -> Preferences -> C/C++ -> Build -> Settings -> Discovery -> CDT GCC Build in Complier Settings [Shared]
From: ${COMMAND} -E -P -v -dD "${INPUTS}"
To : /usr/bin/${COMMAND} -E -P -v -dD "${INPUTS}"
I hope it helps.
For posterity I'm going to post my own solution to this problem. None of the answers above or on related StackOverflow questions helped; most referred to menu entries that didn't exist, and the ones I could try did nothing. I searched other sites as well; there were about 6 different answers repeated many times, and none helped.
Short answer: I blew away the Eclipse install and replaced it. Then it worked. For me at least it wasn't a project or configuration option (at least not one I could get to from the GUI); something in the Eclipse program folder had gotten tweaked and only a new install could repair the problem.
I'm doing Android development using the "ADT" (Android Developer Tools) build of Eclipse. I did something to the configuration that made it start giving the above error (actually two errors, for gcc and g++ both). And I tried plenty of potential solutions (in addition to my own searching for options that might help) with no success.
Thing is, I didn't NEED gcc or g++ in the path. I'm doing Android development, and while both are used in the build process, I'm not using Eclipse to do the builds; I use the Android build system. And the C/C++ Build/Discovery options didn't even give me an option for setting paths for gcc or g++. Other answers I found elsewhere referenced menu entries that don't exist, and most seemed to be about helping people to use the normal C/C++ build within Eclipse, which I didn't need to do.
So I used this opportunity to download the latest ADT package from Google, and then I ran the new one, importing the existing project into a new workspace (just in case the old workspace was corrupted or otherwise part of the problem). No more annoying gcc/g++ error.
I got the same error while I was using "Eclipse IDE for C/C++ Developers."
Install Eclipse from Ubuntu Software Center and then download and install Eclipse CDT.
To install CDT, open Eclipse -> Help -> Install New Software -> Add -> Archieve...
Then give CDT path to there. That's all
I was able to fix the problem by selecting
project(right click in Project Explorer on your project)->properties->Tool Chain Editor
and switching the Current Toolchain: to Android GCC and Current Buolder: to Android Builder
I also had the same problem. I did not have this error running my program but after a adding, including different Api and paths , probably unintentionally some changes happened in my Path that I could not fix it.
I could fix this error by going to Properties and just restore default for all the Tabs.
I'm trying to compile a code i made in C in Debian using CDT for Eclipse and i'm having the famouse Binary not found error when i try to compile the code. I already build the code by pressing Ctrl+B and the Debug folder appears, and the code doesn't have any syntax error, but the error still there. After that i tried to make a run configuration for my project but i'm not sure about what to put where it say's C/C++ Application. Which is the best configuration for this problem?
I'm using Debian Squeeze, Eclipse CDT and GCC as compiler
If you have successfully built your project and have an executable you can run (no build errors, project properly configured as executable), just press a "search project" or "browse" button in "debug configurations" dialog and point it to your executable.
UPDATE 1:
My original post was too long and obscured the real problem. I have discovered exactly what is causing the "Multiple targets" bug when Make is called.
UPDATE 2:
I found out that this 'Multiple Targets' bug is caused by GNU Make version 3.8.1 (see here1 and here2). GNU Make 3.8.1 is the current GNU Make released with Cygwin. To summarize the link: The old v3.8.0 handled windows paths fine and the newer v3.8.1 reports errors for windows paths (maybe it's a passive aggressive jab from the FSF?).
When you start a new project in Eclipse+CDT+Cygwin w/o external includes/libraries, everything works fine for me.
As soon as I try to use an external include/library I get the "Multiple targets" bug.
Here is exactly the steps needed to reproduce the bug on Windows+Eclipse+CDT+Cygwin:
Project project properties --> C/C++ Build --> Settings --> Tool Settings --> Cygwin C Compiler --> Includes --> Include Paths (-I) -- > Add Button --> Pick directory --> "C:\dir1\dir2"
I hit build.
It builds with no errors the first time.
I hit build again... I get build errors "Multiple targets. Stop.".
I click on the error.
Eclipse pulls up a makefile. The error happens when make sees the windows path for the new include file from the external library:
# NOTE: Error happens when the first "C:/" occurs
src/main.d src/main.o: ../src/main.c C:/dir1/dir2/ExternalLibrary.h
The reason for Make getting an error "Multiple targets" is because it sees the ":" which is part of the Make syntax for declaring a target. When there are two ":", Make errors out because it doesn't know what to do with "Multiple targets."
I can not edit the makefiles manually because they are immediately regenerated and overwritten [UPDATE: by Eclipse-CDT]. Given that I can't manually edit the makefile.
Is there any way for Eclipse to NOT use the "C:\" path? or tell make to ignore the "C:\" path?
Is this an Eclipse+CDT+Cygwin bug?
If you use Eclipse+CDT+Cygwin... please lend a hand (I don't want to use Visual Studios...)! Maybe I am using Eclipse+CDT+cygwin wrong? How do YOU get External Library includes to work?
*Very very frustrated*
Trying to stay Open-Source and cross-platform user,
Trevor
Turns out the "multiple targets" issue is caused by the current version of GNU Make installed from Cygwin. GNU Make 3.8.1 is the current GNU Make released with Cygwin.
The GNU Make 3.8.1 does not handle windows paths that contain "C:\". So every time your make file has a windows path with "C:\" you get a build error "multiple targets".
The solution I ended up doing is to download a fixed GNU Make v3.8.1. See Here1 or Here2. Then Eclipse+CDT+Cygwin worked fine again.
Update (05-feb-2015):
With an updated cygwin and a new Make (4.0.x) then the problem goes away.
https://superuser.com/questions/154418/where-do-i-get-make-for-cygwin
Had a such a problem, too. Problem was that I included paths on the project settings. Then I had absolute paths. When including the paths in the folder settings with relative paths it worked fine.
I still Got the same problem with eclipse/CDT Juno after update cygwin
to fix it:
you need make 3.80-1 or older and this needs cygintl-2.dll.
download make3.80-1 from
http://www.filewatcher.com/m/make-3.80-1.tar.bz2.286814-0.html
and the needed Dll from
http://www.dllguru.com/cygintl-2.dll.html
extract it somewhere
rename your make in cygwin/bin to makeVersion e.g. make3.82.90
copy cygintl-2.dll and make into cygwin/bin
try build your project in eclipse twice, the problem should be disappeared
gerdi
Just spend 3 straight hours trying to solve the java.lang.UnsatisfiedLinkError: no jtokyocabinet in java.library.path problem in Eclipse in Linux.
Downloaded TC and TC-Java sources,
Built them both using ./config --prefix=/usr (so everything "JNI" related should be in /usr/lib)
Set the LD_LIBRARY_PATH=/usr/lib and CLASSPATH="$CLASSPATH:/usr/local/lib/tokyocabinet.jar" and exported both in .profile
Imported tokyocabinet.jar into the project.
Am I missing a setting other than the proper -Djava.library.path=. settings? I can't even find anything on the net about jtokyocabinet on the web or in the documentation. What's the secret sauce to getting this thing to work?
try to make a link to libjtokyocabinet.so...0 in your JAVA_HOME/jre/lib/i386.
it is because your code can not find tokyocabinet's *.so and *.a files, usually they are in /usr/local/lib, run the following command:
export LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
and then try your code again.
Have the same problem, in my case, using OpenSUSE 12.3 64 bits and Eclipse.
First, the kyotocabinet-java package can be downloaded from this repository:
http://download.opensuse.org/repositories/devel:/libraries:/c_c++/openSUSE_12.3/
This package provide /usr/lib64/libjkyotocabinet.so.1.1.0 that is the library used by the kyotocabinet jar you can get from maven or the official site.
Looking for this lib I found that there is created a slink:
xxxx#xxxx:/usr/lib64> ls -al /usr/lib64/libjkyoto*
/usr/lib64/libjkyotocabinet.so.1 -> libjkyotocabinet.so.1.1.0
/usr/lib64/libjkyotocabinet.so.1.1.0
I just created a new slink without the ".1" at the end...
sudo ln -s libjkyotocabinet.so.1.1.0 libjkyotocabinet.so
/usr/lib64/libjkyotocabinet.so -> /usr/lib64/libjkyotocabinet.so.1.1.0
And all worked alright, seems that
System.loadLibrary("jkyotocabinet");
don't work if the library name is ended with something different to ".so"
Yes, you're missing something. Eclipse controls its own classpath, so whatever you set up in the environment outside Eclipse is likely not to have any effect.
You need to go into the properties for your project, find the "Build Path" settings and add the path to your tc.jar (or jars) to your build path there.
It may be easier to set up a /lib directory within your eclipse project, copy your tokyo jar there and add that to your build path. That way, it becomes part of your project (and can move from Eclipse installation to Eclipse installation) rather than being an external system dependency.
I have install the C/C++ CDT Version of Eclipse.
After making a HelloWorld.c file and get the code in there I get an error of "Launch failed. Binary not found".
I found in google that my Eclipse miss the compiler and I install MinGW on my computer and add the path to env variables (tested it with "gcc -v" in cmd and succeded).
But poorly it get the same Launch Failed error - any ideas, what step I forgot?
Some things to check:
1.) MinGW tools are installed as well. Make sure you have the C compiler and the Make program
2.) Check your Environment variables. Make sure both the compiler and Make are on the path.
3.) Eclipse is a temperamental beast at times, don't lose heart :-)
4.) If you're looking for a good IDE (without care for ideological concerns), might be worth looking at Bloodshed C++ IDE and Visual C++ 2010 express (or whatever they call their free version).
5.) Check the options menu in Eclipse to make sure it's looking at the correct environment variables for finding the Path.
IMHO, the simplest setup for eclipse on windows these days is cygwin - it seems to have been updated more recently than mingw, and works better.
Go to http://www.cygwin.com/, download the installer, select the default directory of c:\cygwin. Select 'All users'.
When it offers a list of packages, select 'gcc', 'binutils' and 'make' under the 'devel' category.
Add c:\cygwin\bin to your windows environment PATH.
Make sure Eclipse knows where to find your gcc compiler. An easier way would be to use EasyEclipse until you are more comfortable with your dev env.
I needed to move from the MinGW gcc to the CygWin gcc - all the C++2011 works and others say it is a better option too. Download the CygWin binaries etc. and then open up Eclipse.
In project properties, C/C++ Build -> Environment and set the CYGWIN_HOME variable. This worked fine for me on Eclipse Kepler Windows 7 (64Bit)
I also put the cygwin bin directory at the front of my Windows PATH variable.
Full details here:
http://help.eclipse.org/indigo/index.jsp?topic=%2Forg.eclipse.cdt.doc.user%2Fconcepts%2Fcdt_o_home.htm
You can try installing wascana. It automatically set up GNU compiler for you on Windows.