Related
I don't understand how to use $scope.$watch and $scope.$apply. The official documentation isn't helpful.
What I don't understand specifically:
Are they connected to the DOM?
How can I update DOM changes to the model?
What is the connection point between them?
I tried this tutorial, but it takes the understanding of $watch and $apply for granted.
What do $apply and $watch do, and how do I use them appropriately?
You need to be aware about how AngularJS works in order to understand it.
Digest cycle and $scope
First and foremost, AngularJS defines a concept of a so-called digest cycle. This cycle can be considered as a loop, during which AngularJS checks if there are any changes to all the variables watched by all the $scopes. So if you have $scope.myVar defined in your controller and this variable was marked for being watched, then you are implicitly telling AngularJS to monitor the changes on myVar in each iteration of the loop.
A natural follow-up question would be: Is everything attached to $scope being watched? Fortunately, no. If you would watch for changes to every object in your $scope, then quickly a digest loop would take ages to evaluate and you would quickly run into performance issues. That is why the AngularJS team gave us two ways of declaring some $scope variable as being watched (read below).
$watch helps to listen for $scope changes
There are two ways of declaring a $scope variable as being watched.
By using it in your template via the expression <span>{{myVar}}</span>
By adding it manually via the $watch service
Ad 1)
This is the most common scenario and I'm sure you've seen it before, but you didn't know that this has created a watch in the background. Yes, it had! Using AngularJS directives (such as ng-repeat) can also create implicit watches.
Ad 2)
This is how you create your own watches. $watch service helps you to run some code when some value attached to the $scope has changed. It is rarely used, but sometimes is helpful. For instance, if you want to run some code each time 'myVar' changes, you could do the following:
function MyController($scope) {
$scope.myVar = 1;
$scope.$watch('myVar', function() {
alert('hey, myVar has changed!');
});
$scope.buttonClicked = function() {
$scope.myVar = 2; // This will trigger $watch expression to kick in
};
}
$apply enables to integrate changes with the digest cycle
You can think of the $apply function as of an integration mechanism. You see, each time you change some watched variable attached to the $scope object directly, AngularJS will know that the change has happened. This is because AngularJS already knew to monitor those changes. So if it happens in code managed by the framework, the digest cycle will carry on.
However, sometimes you want to change some value outside of the AngularJS world and see the changes propagate normally.
Consider this - you have a $scope.myVar value which will be modified within a jQuery's $.ajax() handler. This will happen at some point in future. AngularJS can't wait for this to happen, since it hasn't been instructed to wait on jQuery.
To tackle this, $apply has been introduced. It lets you start the digestion cycle explicitly. However, you should only use this to migrate some data to AngularJS (integration with other frameworks), but never use this method combined with regular AngularJS code, as AngularJS will throw an error then.
How is all of this related to the DOM?
Well, you should really follow the tutorial again, now that you know all this. The digest cycle will make sure that the UI and the JavaScript code stay synchronised, by evaluating every watcher attached to all $scopes as long as nothing changes. If no more changes happen in the digest loop, then it's considered to be finished.
You can attach objects to the $scope object either explicitly in the Controller, or by declaring them in {{expression}} form directly in the view.
Further readings:
Make Your Own AngularJS, Part 1: Scopes And Digest
In AngularJS, we update our models, and our views/templates update the DOM "automatically" (via built-in or custom directives).
$apply and $watch, both being Scope methods, are not related to the DOM.
The Concepts page (section "Runtime") has a pretty good explanation of the $digest loop, $apply, the $evalAsync queue and the $watch list. Here's the picture that accompanies the text:
Whatever code has access to a scope – normally controllers and directives (their link functions and/or their controllers) – can set up a "watchExpression" that AngularJS will evaluate against that scope. This evaluation happens whenever AngularJS enters its $digest loop (in particular, the "$watch list" loop). You can watch individual scope properties, you can define a function to watch two properties together, you can watch the length of an array, etc.
When things happen "inside AngularJS" – e.g., you type into a textbox that has AngularJS two-way databinding enabled (i.e., uses ng-model), an $http callback fires, etc. – $apply has already been called, so we're inside the "AngularJS" rectangle in the figure above. All watchExpressions will be evaluated (possibly more than once – until no further changes are detected).
When things happen "outside AngularJS" – e.g., you used bind() in a directive and then that event fires, resulting in your callback being called, or some jQuery registered callback fires – we're still in the "Native" rectangle. If the callback code modifies anything that any $watch is watching, call $apply to get into the AngularJS rectangle, causing the $digest loop to run, and hence AngularJS will notice the change and do its magic.
AngularJS extends this events-loop, creating something called AngularJS context.
$watch()
Every time you bind something in the UI you insert a $watch in a $watch list.
User: <input type="text" ng-model="user" />
Password: <input type="password" ng-model="pass" />
Here we have $scope.user, which is bound to the first input, and we have $scope.pass, which is bound to the second one. Doing this we add two $watches to the $watch list.
When our template is loaded, AKA in the linking phase, the compiler will look for every directive and creates all the $watches that are needed.
AngularJS provides $watch, $watchcollection and $watch(true). Below is a neat diagram explaining all the three taken from watchers in depth.
angular.module('MY_APP', []).controller('MyCtrl', MyCtrl)
function MyCtrl($scope,$timeout) {
$scope.users = [{"name": "vinoth"},{"name":"yusuf"},{"name":"rajini"}];
$scope.$watch("users", function() {
console.log("**** reference checkers $watch ****")
});
$scope.$watchCollection("users", function() {
console.log("**** Collection checkers $watchCollection ****")
});
$scope.$watch("users", function() {
console.log("**** equality checkers with $watch(true) ****")
}, true);
$timeout(function(){
console.log("Triggers All ")
$scope.users = [];
$scope.$digest();
console.log("Triggers $watchCollection and $watch(true)")
$scope.users.push({ name: 'Thalaivar'});
$scope.$digest();
console.log("Triggers $watch(true)")
$scope.users[0].name = 'Superstar';
$scope.$digest();
});
}
http://jsfiddle.net/2Lyn0Lkb/
$digest loop
When the browser receives an event that can be managed by the AngularJS context the $digest loop will be fired. This loop is made from two smaller loops. One processes the $evalAsync queue, and the other one processes the $watch list. The $digest will loop through the list of $watch that we have
app.controller('MainCtrl', function() {
$scope.name = "vinoth";
$scope.changeFoo = function() {
$scope.name = "Thalaivar";
}
});
{{ name }}
<button ng-click="changeFoo()">Change the name</button>
Here we have only one $watch because ng-click doesn’t create any watches.
We press the button.
The browser receives an event which will enter the AngularJS context
The $digest loop will run and will ask every $watch for changes.
Since the $watch which was watching for changes in $scope.name
reports a change, it will force another $digest loop.
The new loop reports nothing.
The browser gets the control back and it will update the DOM
reflecting the new value of $scope.name
The important thing here is that EVERY event that enters the AngularJS context will run a $digest loop. That means that every time we write a letter in an input, the loop will run checking every $watch in this page.
$apply()
If you call $apply when an event is fired, it will go through the angular-context, but if you don’t call it, it will run outside it. It is as easy as that. $apply will call the $digest() loop internally and it will iterate over all the watches to ensure the DOM is updated with the newly updated value.
The $apply() method will trigger watchers on the entire $scope chain whereas the $digest() method will only trigger watchers on the current $scope and its children. When none of the higher-up $scope objects need to know about the local changes, you can use $digest().
I found very in-depth videos which cover $watch, $apply, $digest and digest cycles in:
AngularJS - Understanding Watcher, $watch, $watchGroup, $watchCollection, ng-change
AngularJS - Understanding digest cycle (digest phase or digest process or digest loop)
AngularJS Tutorial - Understanding $apply and $digest (in depth)
Following are a couple of slides used in those videos to explain the concepts (just in case, if the above links are removed/not working).
In the above image, "$scope.c" is not being watched as it is not used in any of the data bindings (in markup). The other two ($scope.a and $scope.b) will be watched.
From the above image: Based on the respective browser event, AngularJS captures the event, performs digest cycle (goes through all the watches for changes), execute watch functions and update the DOM. If not browser events, the digest cycle can be manually triggered using $apply or $digest.
More about $apply and $digest:
There are $watchGroup and $watchCollection as well. Specifically, $watchGroup is really helpful if you want to call a function to update an object which has multiple properties in a view that is not dom object, for e.g. another view in canvas, WebGL or server request.
Here, the documentation link.
Just finish reading ALL the above, boring and sleepy (sorry but is true). Very technical, in-depth, detailed, and dry.
Why am I writing? Because AngularJS is massive, lots of inter-connected concepts can turn anyone going nuts. I often asked myself, am I not smart enough to understand them? No! It's because so few can explain the tech in a for-dummie language w/o all the terminologies!
Okay, let me try:
1) They are all event-driven things. (I hear the laugh, but read on)
If you don't know what event-driven is Then
think you place a button
on the page, hook it up w/ a function using "on-click", waiting for
users to click on it to trigger the actions you plant inside the
function. Or think of "trigger" of SQL Server / Oracle.
2) $watch is "on-click".
What's special about is it takes 2 functions as parameters, first one
gives the value from the event, second one takes the value into
consideration...
3) $digest is the boss who checks around tirelessly,
bla-bla-bla but a good boss.
4) $apply gives you the way when you want to do it manually, like a fail-proof (in case on-click doesn't kick in, you force it to run.)
Now, let's make it visual. Picture this to make it even more easy to
grab the idea:
In a restaurant,
- WAITERS
are supposed to take orders from customers, this is
$watch(
function(){return orders;},
function(){Kitchen make it;}
);
- MANAGER running around to make sure all waiters are awake, responsive to any sign of changes from customers. This is $digest()
- OWNER has the ultimate power to drive everyone upon request, this is $apply()
AngularJS allows you to implement two-way data binding. However, the interesting part is how it detects model changes? The model is usually a plain object like the code below. We can change the name property of $scope.user but how does AngularJS detect the model changed? Does AngularJS enum all the properties of the $scope object?
angular.module('myApp', [])
.controller('BusinessCardController', function($scope){
$scope.user = {
name: 'Tanay Pant'
}
});
<input type="text" ng-model="user.name" placeholder="Full Name" />
There is a digest cycle, where the scope examines all of the $watch expressions and compares them with the previous value. It looks at the object models for changes, if the old value isn't the same as the new value, AngularJS will update the appropriate places, a.k.a dirty checking.
In order for the digest cycle to be execute $apply(fn) has to be run, this is how you enter the Angular world from JavaScript. How does $apply(fn) get called (taken from AngularJs integration with browser):
The browser's event-loop waits for an event to arrive. An event is a user interaction, timer event, or network event (response from a server).
The event's callback gets executed. This enters the JavaScript context. The callback can modify the DOM structure.
Once the callback executes, the browser leaves the JavaScript context and re-renders the view based on DOM changes.
Data Binding
Digest Cycle Explanation
In order to achieve two-way binding, directives register watchers. For a page to be fast and efficient we need to try and reduce all these watchers that we create. So you should be careful when using two-way binding - i.e. only use it when you really needed. Otherwise use one-way:
<h1> {{ ::vm.title }} </h1>
Here it is quite obvious that the title of the page probably won't be changed while the user is on the page - or needs to see the new one if it is changed. So we can use :: to register a one-way binding during the template linking phase.
The main issues I've seen with explosions of watchers are grids with hundreds of rows. If these rows have quite a few columns and in each cell there is two-way data binding, then you're in for a treat. You can sit back and wait like in modem times for the page to load!
Two-way binding is limited almost exclusively to elements that use ng-model. The direction going from view to model uses standard event handlers to detect changes that must be updated within the model (e.g., onchange). The direction going from the model back to the view is updated during a $digest. But we do not call $digest directly.
Every element that is on your page that is going to respond to the digest cycle will, somewhere, attach a listener and an expression to its scope using $watch. When you write {{ foo() }}, or when you use ng-model='user.name', internally there is a call to $watch made on your behalf with a Javascript expression that will be run every time a digest cycle is run. This registration might happen during the compile of the template (our first example), or it might happen during the link phase of a directive (our second).
There is no magic here. The listeners that are attached are regular functions -- in our example, the listener for the expression foo() is provided for you, and it will update the html text on the page, while the listener for the expression user.name will call setText, or setOption, or whatever is required by the particular input which ng-model has been attached.
While angular can handle most of the listening, you can attach your own watch expressions with your own listeners manually inside any function that has access to a scope (scope is important because we will tear down those watchers if the corresponding parts of the page are removed). Be mindful of excess. Bindings aren't free, and the more things that are bound, the slower the page will respond. One-time bindings are one way of reducing this cost. Using $on with $emit and $broadcast are another.
So when is digest called? It is certainly not automatic. If the digest cycle is running, it means someone somewhere called $apply on their scope or on the root scope. ng-model attaches handlers which will respond to regular html events and will make calls to $apply on your behalf. But foo(), on the other hand, will never get called until some other bit of script somewhere calls $apply. Fortunately, most functions that you fill out for angular wrap those functions with a call to $apply, so you don't often have to make the call yourself (e.g., $timeout is wrapped with $apply, which is why we use it instead of setTimeout). But if you were using something outside of the scope of angular (a 3rd party library that connects to events), you would need to remember to call $apply yourself, and just like above, you can do this manually by calling $apply anywhere you have access to a scope.
In order to make Data Binding possible, AngularJS uses $watch API's to observer the changes on the scope. AngularJS registered watchers for each variable on the scope to observe the value in it. If the value of the variable on the scope gets changes, then the view gets updated automatically.
It happens because of the $digest cycle is triggered. Hence, AngularJS processes all the registered watchers on the current scope and the children and check for the updates and call the dedicated watcher listeners until the model is stabilized and no more listeners are fired. Once the $digest loop finishes the execution, the browser re-renders the DOM and reflects the changes
By default, every variable on a scope is observed by the angular. In this way, unnecessary variable are also observed by the angular that is time consuming and as a result page is becoming slow.
I've read this Q/A about databinding and $apply -> $digest in AngularJS :
How does data binding work in AngularJS?
While I understand the principle and the consequences, I'm still unsure about when AngulaJS is going to call $digest to do the dirty-checks. (And so, when should I consider to do something about the $watcher)
Every example I found was about using 'ng-click', 'ng-show', or 'ng-class'. But I'm pretty sure that it is also triggered by any change on variables of the scope ({{myData}}), and by many others directives (All of them maybe ?).
I would like to understand in which cases a $digest is called.
Can you give me any generic rule to knwo when it is called, or an exhaustive list of actions that will trigger a dirty-check ?
Have a look at this:
angularjs docs, specifically at "Integration with the browser event loop" section.
Basically the way it works is that AngularJS binds event handlers to any element that interacts with angular (any element that has a directive attached to it) and every time that event fires, $apply is called which internally calls $digest which will trigger the reevaluation of all the $watches which will check for values changed, etc...
everybody!
Here is my not working and not complete sample for demonstrating purposes.
In few words, suppose that I have some control and some control event (select tv node), in this event I change some scope variable, say $scope.test and I expect it to change (it's value on html page). But in provided sample code it doesn't change unless I use scope.$apply() method (commented), when scope.$apply() is used then everything works as expected.
So, my question is more about applicability of use of scope.$apply() method.
There are a lot of articles related to this and most of them suggest that apply() method shouldn't be used unless you are developing angular directives
or some advanced binding scenarious. That's why I'm a little bit confused with my relatively simple case.
Thanks in advance.
The rule is that you call $scope.$apply() whenever you change some state that Angular has to respond to outside of Angular's framework, eg an event handled by jQuery (or in your case Kendo) event handlers.
Moreover the $scope should not be available in your select: handler because the handler is Kendo, $scope is Angular. (Indeed your example throws Cannot set property 'test' of undefined when clicking on a label.)
I don't understand how to use $scope.$watch and $scope.$apply. The official documentation isn't helpful.
What I don't understand specifically:
Are they connected to the DOM?
How can I update DOM changes to the model?
What is the connection point between them?
I tried this tutorial, but it takes the understanding of $watch and $apply for granted.
What do $apply and $watch do, and how do I use them appropriately?
You need to be aware about how AngularJS works in order to understand it.
Digest cycle and $scope
First and foremost, AngularJS defines a concept of a so-called digest cycle. This cycle can be considered as a loop, during which AngularJS checks if there are any changes to all the variables watched by all the $scopes. So if you have $scope.myVar defined in your controller and this variable was marked for being watched, then you are implicitly telling AngularJS to monitor the changes on myVar in each iteration of the loop.
A natural follow-up question would be: Is everything attached to $scope being watched? Fortunately, no. If you would watch for changes to every object in your $scope, then quickly a digest loop would take ages to evaluate and you would quickly run into performance issues. That is why the AngularJS team gave us two ways of declaring some $scope variable as being watched (read below).
$watch helps to listen for $scope changes
There are two ways of declaring a $scope variable as being watched.
By using it in your template via the expression <span>{{myVar}}</span>
By adding it manually via the $watch service
Ad 1)
This is the most common scenario and I'm sure you've seen it before, but you didn't know that this has created a watch in the background. Yes, it had! Using AngularJS directives (such as ng-repeat) can also create implicit watches.
Ad 2)
This is how you create your own watches. $watch service helps you to run some code when some value attached to the $scope has changed. It is rarely used, but sometimes is helpful. For instance, if you want to run some code each time 'myVar' changes, you could do the following:
function MyController($scope) {
$scope.myVar = 1;
$scope.$watch('myVar', function() {
alert('hey, myVar has changed!');
});
$scope.buttonClicked = function() {
$scope.myVar = 2; // This will trigger $watch expression to kick in
};
}
$apply enables to integrate changes with the digest cycle
You can think of the $apply function as of an integration mechanism. You see, each time you change some watched variable attached to the $scope object directly, AngularJS will know that the change has happened. This is because AngularJS already knew to monitor those changes. So if it happens in code managed by the framework, the digest cycle will carry on.
However, sometimes you want to change some value outside of the AngularJS world and see the changes propagate normally.
Consider this - you have a $scope.myVar value which will be modified within a jQuery's $.ajax() handler. This will happen at some point in future. AngularJS can't wait for this to happen, since it hasn't been instructed to wait on jQuery.
To tackle this, $apply has been introduced. It lets you start the digestion cycle explicitly. However, you should only use this to migrate some data to AngularJS (integration with other frameworks), but never use this method combined with regular AngularJS code, as AngularJS will throw an error then.
How is all of this related to the DOM?
Well, you should really follow the tutorial again, now that you know all this. The digest cycle will make sure that the UI and the JavaScript code stay synchronised, by evaluating every watcher attached to all $scopes as long as nothing changes. If no more changes happen in the digest loop, then it's considered to be finished.
You can attach objects to the $scope object either explicitly in the Controller, or by declaring them in {{expression}} form directly in the view.
Further readings:
Make Your Own AngularJS, Part 1: Scopes And Digest
In AngularJS, we update our models, and our views/templates update the DOM "automatically" (via built-in or custom directives).
$apply and $watch, both being Scope methods, are not related to the DOM.
The Concepts page (section "Runtime") has a pretty good explanation of the $digest loop, $apply, the $evalAsync queue and the $watch list. Here's the picture that accompanies the text:
Whatever code has access to a scope – normally controllers and directives (their link functions and/or their controllers) – can set up a "watchExpression" that AngularJS will evaluate against that scope. This evaluation happens whenever AngularJS enters its $digest loop (in particular, the "$watch list" loop). You can watch individual scope properties, you can define a function to watch two properties together, you can watch the length of an array, etc.
When things happen "inside AngularJS" – e.g., you type into a textbox that has AngularJS two-way databinding enabled (i.e., uses ng-model), an $http callback fires, etc. – $apply has already been called, so we're inside the "AngularJS" rectangle in the figure above. All watchExpressions will be evaluated (possibly more than once – until no further changes are detected).
When things happen "outside AngularJS" – e.g., you used bind() in a directive and then that event fires, resulting in your callback being called, or some jQuery registered callback fires – we're still in the "Native" rectangle. If the callback code modifies anything that any $watch is watching, call $apply to get into the AngularJS rectangle, causing the $digest loop to run, and hence AngularJS will notice the change and do its magic.
AngularJS extends this events-loop, creating something called AngularJS context.
$watch()
Every time you bind something in the UI you insert a $watch in a $watch list.
User: <input type="text" ng-model="user" />
Password: <input type="password" ng-model="pass" />
Here we have $scope.user, which is bound to the first input, and we have $scope.pass, which is bound to the second one. Doing this we add two $watches to the $watch list.
When our template is loaded, AKA in the linking phase, the compiler will look for every directive and creates all the $watches that are needed.
AngularJS provides $watch, $watchcollection and $watch(true). Below is a neat diagram explaining all the three taken from watchers in depth.
angular.module('MY_APP', []).controller('MyCtrl', MyCtrl)
function MyCtrl($scope,$timeout) {
$scope.users = [{"name": "vinoth"},{"name":"yusuf"},{"name":"rajini"}];
$scope.$watch("users", function() {
console.log("**** reference checkers $watch ****")
});
$scope.$watchCollection("users", function() {
console.log("**** Collection checkers $watchCollection ****")
});
$scope.$watch("users", function() {
console.log("**** equality checkers with $watch(true) ****")
}, true);
$timeout(function(){
console.log("Triggers All ")
$scope.users = [];
$scope.$digest();
console.log("Triggers $watchCollection and $watch(true)")
$scope.users.push({ name: 'Thalaivar'});
$scope.$digest();
console.log("Triggers $watch(true)")
$scope.users[0].name = 'Superstar';
$scope.$digest();
});
}
http://jsfiddle.net/2Lyn0Lkb/
$digest loop
When the browser receives an event that can be managed by the AngularJS context the $digest loop will be fired. This loop is made from two smaller loops. One processes the $evalAsync queue, and the other one processes the $watch list. The $digest will loop through the list of $watch that we have
app.controller('MainCtrl', function() {
$scope.name = "vinoth";
$scope.changeFoo = function() {
$scope.name = "Thalaivar";
}
});
{{ name }}
<button ng-click="changeFoo()">Change the name</button>
Here we have only one $watch because ng-click doesn’t create any watches.
We press the button.
The browser receives an event which will enter the AngularJS context
The $digest loop will run and will ask every $watch for changes.
Since the $watch which was watching for changes in $scope.name
reports a change, it will force another $digest loop.
The new loop reports nothing.
The browser gets the control back and it will update the DOM
reflecting the new value of $scope.name
The important thing here is that EVERY event that enters the AngularJS context will run a $digest loop. That means that every time we write a letter in an input, the loop will run checking every $watch in this page.
$apply()
If you call $apply when an event is fired, it will go through the angular-context, but if you don’t call it, it will run outside it. It is as easy as that. $apply will call the $digest() loop internally and it will iterate over all the watches to ensure the DOM is updated with the newly updated value.
The $apply() method will trigger watchers on the entire $scope chain whereas the $digest() method will only trigger watchers on the current $scope and its children. When none of the higher-up $scope objects need to know about the local changes, you can use $digest().
I found very in-depth videos which cover $watch, $apply, $digest and digest cycles in:
AngularJS - Understanding Watcher, $watch, $watchGroup, $watchCollection, ng-change
AngularJS - Understanding digest cycle (digest phase or digest process or digest loop)
AngularJS Tutorial - Understanding $apply and $digest (in depth)
Following are a couple of slides used in those videos to explain the concepts (just in case, if the above links are removed/not working).
In the above image, "$scope.c" is not being watched as it is not used in any of the data bindings (in markup). The other two ($scope.a and $scope.b) will be watched.
From the above image: Based on the respective browser event, AngularJS captures the event, performs digest cycle (goes through all the watches for changes), execute watch functions and update the DOM. If not browser events, the digest cycle can be manually triggered using $apply or $digest.
More about $apply and $digest:
There are $watchGroup and $watchCollection as well. Specifically, $watchGroup is really helpful if you want to call a function to update an object which has multiple properties in a view that is not dom object, for e.g. another view in canvas, WebGL or server request.
Here, the documentation link.
Just finish reading ALL the above, boring and sleepy (sorry but is true). Very technical, in-depth, detailed, and dry.
Why am I writing? Because AngularJS is massive, lots of inter-connected concepts can turn anyone going nuts. I often asked myself, am I not smart enough to understand them? No! It's because so few can explain the tech in a for-dummie language w/o all the terminologies!
Okay, let me try:
1) They are all event-driven things. (I hear the laugh, but read on)
If you don't know what event-driven is Then
think you place a button
on the page, hook it up w/ a function using "on-click", waiting for
users to click on it to trigger the actions you plant inside the
function. Or think of "trigger" of SQL Server / Oracle.
2) $watch is "on-click".
What's special about is it takes 2 functions as parameters, first one
gives the value from the event, second one takes the value into
consideration...
3) $digest is the boss who checks around tirelessly,
bla-bla-bla but a good boss.
4) $apply gives you the way when you want to do it manually, like a fail-proof (in case on-click doesn't kick in, you force it to run.)
Now, let's make it visual. Picture this to make it even more easy to
grab the idea:
In a restaurant,
- WAITERS
are supposed to take orders from customers, this is
$watch(
function(){return orders;},
function(){Kitchen make it;}
);
- MANAGER running around to make sure all waiters are awake, responsive to any sign of changes from customers. This is $digest()
- OWNER has the ultimate power to drive everyone upon request, this is $apply()