I am trying to setup ADFS to work with SAML 2.0 Service Provider, but I am facing an issue that can't authenticate users via ADFS webpage. This is the error I am getting:
Encountered error during federation passive request.
Additional Data
Exception details:
Microsoft.IdentityServer.Web.RequestFailedException: MSIS7012: An error occurred while processing the request. Contact your administrator for details. ---> System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.
at Microsoft.IdentityServer.Protocols.WSTrust.WSTrustClientManager.Issue(Message request, WCFResponseData responseData)
at Microsoft.IdentityServer.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst, WCFResponseData responseData)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.SubmitRequest(MSISRequestSecurityToken request)
--- End of inner exception stack trace ---
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.SubmitRequest(MSISRequestSecurityToken request)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.RequestBearerToken(MSISSignInRequestMessage signInRequest, SecurityTokenElement onBehalfOf, SecurityToken primaryAuthToken, String desiredTokenType, Uri& replyTo)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.BuildSignInResponseCoreWithSecurityToken(SecurityToken securityToken, WSFederationMessage incomingMessage)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.BuildSignInResponseForProtocolRequest(FederationPassiveContext federationPassiveContext, SecurityToken securityToken)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.BuildSignInResponse(SecurityToken securityToken)
System.ServiceModel.FaultException: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework 3.0 SDK documentation and inspect the server trace logs.
at Microsoft.IdentityServer.Protocols.WSTrust.WSTrustClientManager.Issue(Message request, WCFResponseData responseData)
at Microsoft.IdentityServer.Protocols.WSTrust.WSTrustClient.Issue(RequestSecurityToken rst, WCFResponseData responseData)
at Microsoft.IdentityServer.Web.FederationPassiveAuthentication.SubmitRequest(MSISRequestSecurityToken request)
Any ideas what it could be? I tried many setting options, even reinstalled ADFS on the fresh windows copy.
Related
I have made a few pipelines in Azure Data Factory, which transfer and modify data from Blob Storage (Excel Files) to Azure SQL. They were off for like 2 month and the company has implemented MFA on whole Azure Active Directory.
After that when I try to run the pipelines I have only "Failed status". For every pipeline the error is the same. They are look like this:
Operation on target Data flow1 failed: {"StatusCode":"DFExecutorUserError","Message":"Job failed due to reason: java.lang.Exception: fail to reach https://we.frontend.clouddatahub.net/subscriptions/aa2d32bf-f0d0-4656-807b-7e929da73853/entities/99264214-3071-4faa-87c2-32d9dec7e5a4/identities/00000000-0000-0000-0000-000000000000/token?api-version=2.0 with status code:403, payload:{"error":{"code":"ManagedIdentityInvalidCredential","message":"Acquire MI token from AAD failed. ErrorCode: invalid_client, Message: A configuration issue is preventing authentication - check the error message from the server for details. You can modify the configuration in the application registration portal. See https://aka.ms/msal-net-invalid-client for details. Original exception: AADSTS700027: Client assertion failed signature validation.\r\nTrace ID: 4eef805e-a0ca-494e-bcc2-c01cd755f400\r\nCorrelation ID: f313ba30-9455-4065-90ab-a0fe28dadc99\r\nTimestamp: 2022-02-21 13:11:56Z","details":[],"additionalInfo":[]}}, CorrelationId:171b73ff-5721-45e5-bf95-2b29dc4dd1b4, RunId:887b22ec-6cae-42d3-9580-b93a98800b3c","Details":"java.lang.Exception: fail to reach https://we.frontend.clouddatahub.net/subscriptions/aa2d32bf-f0d0-4656-807b-7e929da73853/entities/99264214-3071-4faa-87c2-32d9dec7e5a4/identities/00000000-0000-0000-0000-000000000000/token?api-version=2.0 with status code:403, payload:{"error":{"code":"ManagedIdentityInvalidCredential","message":"Acquire MI token from AAD failed. ErrorCode: invalid_client, Message: A configuration issue is preventing authentication - check the error message from the server for details. You can modify the configuration in the application registration portal. See https://aka.ms/msal-net-invalid-client for details. Original exception: AADSTS700027: Client assertion failed signature validation.\r\nTrace ID: 4eef805e-a0ca-494e-bcc2-c01cd755f400\r\nCorrelation ID: f313ba30-9455-4065-90ab-a0fe28dadc99\r\nTimestamp: 2022-02-21 13:11:56Z","details":[],"additionalInfo":[]}}, CorrelationId:171b73ff-5721-45e5-bf95-2b29dc4dd1b4, RunId:887b22ec-6cae-42d3-9580-b93a98800b3c\n\tat com.microsoft.datafactory.dat"}
Is there any way I can evade this error without deactivating MFA?
Thank you David Browne - Microsoft for your valuable suggestion. Posting your suggestion as answer to help other community members.
Use either of Managed identity or Provision a Service principle
for authentication. Switch the Authentication to SQL Auth for SQL Server and SAS/Account Key auth for Azure Storage.
For a couple of month we have been sending reports to about 100 users.
We recently enabled MFA on our Office365 Tenant. I added the user sending reports to exceptions. But now the service only sends about 60 of the 100 emails. I have looked into the logs and cant find what the problem actually is.
I have added the error message below.
Than you!
emailextension!WindowsService_12!8850!01/03/2022-06:45:12:: e ERROR: Error sending email. Exception: System.AggregateException: One or more errors occurred. ---> System.Net.Mail.SmtpException: The server committed a protocol violation The server response was:
at System.Net.Mail.SendMailAsyncResult.End(IAsyncResult result)
at System.Net.Mail.SmtpClient.SendMailCallback(IAsyncResult result)
--- End of inner exception stack trace ---
at System.Threading.Tasks.Task.ThrowIfExceptional(Boolean includeTaskCanceledExceptions)
at System.Threading.Tasks.Task.Wait(Int32 millisecondsTimeout, CancellationToken cancellationToken)
at System.Threading.Tasks.Task.Wait(TimeSpan timeout)
at Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider.Deliver(Notification notification)
---> (Inner Exception #0) System.Net.Mail.SmtpException: The server committed a protocol violation The server response was:
at System.Net.Mail.SendMailAsyncResult.End(IAsyncResult result)
at System.Net.Mail.SmtpClient.SendMailCallback(IAsyncResult result)<---
. Additional Information: SmtpException StatusCode:GeneralFailure
notification!WindowsService_12!8850!01/03/2022-06:45:12:: e ERROR: Error occurred processing subscription bb732977-1cb9-4fef-8201-193e0e8b20b8: Failure sending mail: One or more errors occurred.Mail will not be resent.
I actually found the solution. For some reason part of the emails were being sent using TLS 1.0 and the rest were using TLS 1.2 I disabled TLS 1.0 through the registry and it went back to normal.
I have successfully set up a scan for an on-prem dev sql instance. However, i am trying to set up scans on multiple on-prem sql instances.
I have successfully installed the integration run time agent on a server I want to scan. When I double check the credentials to be sure the username and password are correct, it passes as successful.
When I go to set up the scan against this same db, I use the appropriate user name and secret out of the key vault. While setting up the scan, Purview sees all the tables in the db I am wanting to scan.
So, my thought it, if the username or password were incorrect, it wouldn't pass the connection test and or see the tables in the db I'm wanting to scan.
Ok, so after I start the scan, it fails.
In the logs on that server, I can see where it fails w/ the following error code: 7000215
According to https://login.microsoftonline.com/error?code=7000215, this error message is: Developer error - the app is attempting to sign in without the necessary or correct authentication parameters.
So, I'm at a loss at why I can see the db and tables, but it continues to fail the scan.
The event viewer details show: Message:(AADSTS7000215: Invalid client secret is provided.)
Any help or recommendations would be greatly appreciated.
Here's the actual error message:
Retrieving auth token from AAD failed, exception thrown
(Type:(Microsoft.IdentityModel.Clients.ActiveDirectory.AdalServiceException),
Message:(AADSTS7000215: Invalid client secret is provided. Trace ID:
525bc331-5788-4d3c-a576-3570c5c92b00 Correlation ID:
acfc0ed8-c522-4e3b-8922-804df3bf2fbe Timestamp: 2021-02-22 04:06:46Z),
StackTrace:( at
Microsoft.DataTransfer.Execution.DataScan.Retry.d__1`1.MoveNext()
--- End of stack trace from previous location where exception was thrown --- at
System.Runtime.ExceptionServices.ExceptionDispatchInfo.Throw() at
System.Runtime.CompilerServices.TaskAwaiter.HandleNonSuccessAndDebuggerNotification(Task
task) at
Microsoft.DataTransfer.Execution.DataScan.DataScanManagementServiceClient.d__22.MoveNext())
, InnerException (Type:(System.Net.Http.HttpRequestException),
Message:(Response status code does not indicate success: 401
(Unauthorized).), StackTrace:() , InnerException
(Type:(Microsoft.IdentityModel.Clients.ActiveDirectory.AdalException),
Message:({"error":"invalid_client","error_description":"AADSTS7000215:
Invalid client secret is provided.\r\nTrace ID:
525bc331-5788-4d3c-a576-3570c5c92b00\r\nCorrelation ID:
acfc0ed8-c522-4e3b-8922-804df3bf2fbe\r\nTimestamp: 2021-02-22
04:06:46Z","error_codes":[7000215],"timestamp":"2021-02-22
04:06:46Z","trace_id":"525bc331-5788-4d3c-a576-3570c5c92b00","correlation_id":"acfc0ed8-c522-4e3b-8922-804df3bf2fbe","error_uri":"https://login.microsoftonline.com/error?code=7000215"}:
Unknown error), StackTrace:() ) ) ) Job ID:
986cf741-f4bf-4333-a51e-b9c04a15a75c Log ID: Error
I was able to address this issue.
The issue was the integration services run time client was not the most recent version.
A newer version (IntegrationRuntime_5.2.7713.1)
Once I installed this version, I was able to scan the databases previously not able to be scanned.
I followed the example on this website to implement a GCM server using CCS. However the code has exception when it tries to connect to the gcm server (last line in the code below):
ConnectionConfiguration config = new ConnectionConfiguration(GCM_SERVER, GCM_PORT);
config.setSecurityMode(SecurityMode.enabled);
config.setReconnectionAllowed(true);
config.setRosterLoadedAtLogin(false);
config.setSendPresence(false);
config.setSocketFactory(SSLSocketFactory.getDefault());
connection = new XMPPTCPConnection(config);
connection.connect();
I looked up online and someone said I needed to enable billing for my app on appengine in order to use GCM server. I did so but it still does not work. I keep seeing the following error:
gcm.googleapis.com:5235 Exception: Permission denied: Attempt to
access a blocked recipient without permission. (mapped-IPv4)
Am I missing something?
I've recently installed the BizTalk 2013 HL7 adapter on my development machine. During setup, it asks for the logging account, which I provided and was successfully added and the installation finished without a hitch.
However, when I try to submit a message to the Receive port configured to use the HL7 pipeline, I'm always receiving the same errors
First there is an "Information" event log stating:
Login failed for user 'my-BizTalk-HOST-account'. Reason: Failed to open
the explicitly specified database. [CLIENT: 1.2.3.4]
Then immediately after there is:
There was a failure executing the receive pipeline: "BTAHL72XPipelines.BTAHL72XReceivePipeline, BTAHL72XPipelines, Version=1.3.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35" Source: "BTAHL7 2.X Disassembler" Receive Port: "my-receive-port-name" URI: "0.0.0.0:11001" Reason: Unable to configure the logstore.
If I look at the details tab in the event, it shows in the Binary Data in Bytes, the name of my server, followed by master.
A few points to consider:
we do not have SQL Server logging enabled in the HL7 configuration
tool (just the event log)
my-BizTalk-HOST-account is not the account that is configured for HL7 logging anyway, so why is it being used?
I'm not sure why it's trying to access the master database (if that is indeed what the event log is telling me)
SQL logins/users for my-BizTalk-HOST-account are setup in the BizTalk databases with proper permissions
sending to any other receive location behaves fine, it's just those using the BTAHL72xReceivePipeline
Can anyone explain this or have a fix?