I made a view with views module: "exampleview"
View needs an argument: "myarg"
I can load my page at "exampleview/myarg" and at "exampleview".
When I call drupal_goto('exampleview/myarg'); the destination is only "exampleview".
Same result with:
$arr = array('exampleview','myarg');
drupal_goto($arr);
Can you help me?
This is from drupal_goto
Usually the redirected URL is constructed from this function's input parameters. However you may override that behavior by setting a destination in either the $_REQUEST-array (i.e. by using the query string of an URI) This is used to direct the user back to the proper page after completing a form. For example, after editing a post on the 'admin/content'-page or after having logged on using the 'user login'-block in a sidebar. The function drupal_get_destination() can be used to help set the destination URL.
It seems like your destination parameter is set so you have to clear destination parameter or use header function
Related
I am using the oidc-client library to authorize with our own Identity Server 4. It is working fine and I need to extend the login functionality. I'd like to use the OIDC-Parameter "prompt". The parameter is sent correctly to the connect/authorize endpoint. When the Login-Method is called, I am trying to get the AuthorizationContext by calling
var context = await _interaction.GetAuthorizationContextAsync(vm.ReturnUrl);
var prompt = context.PromptModes;
_interaction is an instance of IIdentityServerInteractionService. The PromptModes are always empty. Is this the right way I am trying to access them?
Thank you
It looks like you check the value in an inappropriate place.
The answer for a similar question on Github was:
we have to remove the prompt parameter because we would otherwise run into an endless loop. You could save the parameter in a separate parameter I guess.
I'm trying to access a SSPRS report that has the option to select the year and the month by adding the parameters in the URL as ¶m=value but I always get the default.
This are the parameters and I know I'm sending the correct values in the URL.
This is the report panel where I can select the Year and Month, I'm trying to get the specific report that I need by passing those parameters in the URL.
What could I be doing wrong?
Thank you everyone.
There are a couple of ways these go wrong, I'm guessing your problem is URL encoding of your date parameter, but I'll give you other stuff too. Here is a working URL with 3 parameters: a date, a string, and an integer.
https://db01.MyCompany.com/ReportServer_Prod?/Reports/R440_OutstandingRecp¶mDateEnd=12%2f31%2f2015¶mPropLiab=Property¶mRepPeriod=1
The key parts of this URL:
"https://db01.MyCompany.com/ReportServer_Prod?/" - db01.MyCompany.com is our database VM, and I'm using the "Prod" (production) instance of SQL on it.
NOTE: Check your Reporting Services Configuration application and look at the "Web Service URL" to get what "ReportServer_Prod" is on your installation.
"?/Reports/" is the path to the virtual directory, note that this is different from the path a browser would normally use. Normally my path would be "ReportServer_Prod/Pages/Report.aspx?ItemPath=%2fReports%2fR440_OutstandingRecp" if I was just viewing this from the Reporting Services interface.
Parameters are separated by "&" and it's "ParamName" "=" "ParamValue" so "¶mPropLiab=Property¶mRepPeriod=1" are the string and integer parameters respectively.
Lastly, parameter values are URL encoded if necessary. Mostly it doesn't show up, but for dates and some strings, it becomes necessary. We can't send something like "12/31/2015" because it looks like part of the path, we need a URL encoded string like "12%2f31%2f2015"
Hopefully one (or more) of these were what you needed, reply in the comments if it's still not working or if you need more explanation of why the parts are what they are.
EDIT: One more thing, if a parameter has a "Display" and a "Value" (i.e. in a drop down list) you must pass the value, not the display.
EDIT: I can't make the comment stop hiding my URL, so I'll put it here
WHAT WAS TRIED
https://slo2000/Reports_TECOVA?/Reports/TEXO%20CVA%20Reports%2fTEXO_London_B_CVA_Report&ReportMonth=January&ReportYear=2020
https://slo2000/Reports_TECOVA?/Reports/TEXO%20CVA%20Reports/TEXO_London_B_CVA_Report&ReportMonth=January&ReportYear=2020
https://slo2000/ReportServer_TECOVA?/Reports/TEXO+CVA+Reports/TEXO_London_B_CVA_Report&ReportMonth=January&ReportYear=2020
WHAT WORKS (From #Nacho in comments, brought here for visibility)
http://slo2000/ReportServer_TECOVA/Pages/ReportViewer.aspx?%2TEXO+CVA+Reports%2fTEXO_London_B_CVA_Report&rs:Command=Render&ReportMonth=January&ReportYear=2020
I'm trying the get the route parameter in Next 9 and all the examples in the docs make sense and work. Here https://nextjs.org/learn/basics/clean-urls-with-dynamic-routing/dynamic-routing and here https://nextjs.org/docs#imperatively
My problem is that these examples are all in the context of navigating to a page from a link, I would like to load the page directly from the url.
If I go to localhost:3000/meeting/123 it loads the index page, not teh page nested in the meetings folder.
The query parameter shows the 'asPath' key with eth value 'meeting/123' so its all working but it doesn't actually use the code at pages/meeting/[meetingId].js
How do I load a dynamic route directly from the url?
For anyone else reading this, this works absolutely fine, false alarm, I just forgot to remove my customer server setup that I had for this previously. To do this prior to next 9 you had to set up a custom server and startup using the server. I set everything up for version 9 but was still starting up in teh custom server. Leaving this up here in case anyone else makes teh same mistake.
I do a standard pattern in my application - a link to /controller/delete/object_id, then a post form to "confirm", a check if $this->request->is('post') and if true - the controller deletes the object from database.
What is weird is that for a single, particular object_id, my browser (Firefox) forces the form to be a GET one. With any other object_id everything is ok, but with this particular one, despite all declarations within form tag and etc. brower generates a GET request.
Do you have any clue what this might be?! I even tried to use brower's private mode, because I thought it can be some garbage in browser cache, but the bug is still here.
I managed to bypass this problem:
define a specific action in form->create, pointing to your controller' method
add a hidden field with object_id
add some additional code in the controller method to get object_id from $this->request->data, because a hidden post field is not passed as an argument to method, as it is with GET method.
This way, to some unknown reason, it just works. Anyway, I still feel I'm doing something wrong. It's not as "clean" as I would expect.
Can someone please explain these functions:
RequestHandlerComponent::renderAs()
RequestHandlerComponent::respondAs()
RequestHandlerComponent::setContent()
It feels slightly redundant to have all three of them (as public methods anyway). If I want to respond to a request with a PDF file, does that mean I'd have to call all three functions? How should I use these in my controller?
They're all different. From the API Docs:
renderAs
Sets the layout and template paths for the content type defined by $type.
I.e. more or less a shortcut for $this->layout = '...' and $this->render(...).
respondAs
Sets the response header based on type map index name. If DEBUG is greater than 2, the header is not set.
Outputs header(...).
setContent
Adds/sets the Content-type(s) for the given name. This method allows content-types to be mapped to friendly aliases (or extensions), which allows RequestHandler to automatically respond to requests of that type in the startup method.
Doesn't actually do anything to the output, just allows you to add new types that are not defined by default.
For outputting a PDF (assuming you have it as a file already) you should actually use a Media View.