I want to create a copy of a table, say TestTable, with a new name, say TestTableNew, in the same database with the use of an SSIS package. I've created a "Transfer SQL Server Objects Task" for this with the source database specified as both the SourceDatabase and the DestinationDatabase. When I run this task, the original table TestTable is overwritten with a new -empty- TestTable.
This might well be something really obvious that I've overlooked, but can I somehow specify another name for the destination table somewhere in this transfer task? Or should I solve this in another way?
You can't use the "Transfer SQL Server Objects Task" to copy a table to the same database because there isn't an option to specify the new table name. You would be copying table "TestTable" to table "TestTable", which will fail because they both have the same name.
You can set the "DropObjectsFirst" property to true, but that will make you lose your original table and its data, which I think you did on your test, otherwise you would have received a failure message.
The best option here is to use an "Execute SQL Task" to create the structure of your TestTableNew based on your TestTable and then do a simple OleDBSource -> OleDBDestination transformation to load all the data from one table to another.
My knowledge of SSIS is very limited but I assume you can run sql commands passing in
parameters and therefore generating something like the following dynamically
select *
insert into TestTableNew
from TestTable
Related
On the ETL server I have a DW user table.
On the prod OLTP server I have the sales database. I want to pull the sales only for users that are present in the user table on the ETL server.
Presently I am using an execute SQL task to fetch the DW users into a SSIS System.Object variable. Then using a for each loop to loop through each item (userid) in this variable and via a data flow task fetch the OLTP sales table for each user and dump it into the DW staging table. The for each is taking long time to run.
I want to be able to do an inner join so that the response is quicker, but I cant do this since they are on separate servers. Neither can I use a global temp table to make the inner join, for the same reason.
I tried to collect the DW users into a comma separated string variable and then using it (via string_split) to query into OLTP, but this is also taking more time at the pre-execute phase (not sure why exactly) even for small number of users.
I also am aware of lookup transform but that too will result in all oltp rows to be brought into the dw etl server to test the lookup condition.
Is there any alternate approach to be able to do an inner join by taking the list of users into the source?
Note: I do not have write permissions on the OLTP db.
Based on the comments, I think we can use a temporary table to solve this.
Can you help me understand this restriction? "Neither can I use a global temp table to make the inner join, for the same reason."
The restriction is since oltp server and dw server are separate so can't have global temp table common to both servers. Hope makes sense.
The general pattern we're going to do is
Execute SQL Task to create a temporary table on the OLTP server
A Data Flow task to populate the new temporary table. Source = DW. Destination = OLTP. Ensure Delay Validation = True
Modify existing Data Flow. Modify source to be a query that uses the temporary table i.e. SELECT S.* FROM oltp.sales AS S WHERE EXISTS (SELECT * FROM #SalesPerson AS SP WHERE SP.UserId = S.UserId); Ensure Delay Validation = True
A long form answer on using temporary tables (global to set the metadata, regular thereafter)
I don't use temp table in SSIS
Temporary tables, live in tempdb. Your OLTP and DW connection managers likely do not point to tempdb. To be able to reference a temporary table, local or global, in SSIS you need to either define an additional connection manager for the same server that points explicitly at tempdb so you can use the drop down in the source/destination components (technically accurate but dumb). Or, you use an SSIS Variable to hold the name of the table and use the ~From Variable~ named option in source/destination component (best option, maximum flexibility).
Soup to nuts example
I will use WideWorldImporters as my OLTP system and WideWorldImportersDW as my DW system.
One-time task
Open SQL Server Management Studio, SSMS, and connect to your OLTP system. Define a global temporary table with a unique name and the expected structure. Leave your connection open so the table structure remains intact during initial development.
I used the following statement.
DROP TABLE IF EXISTS #SO_70530036;
CREATE TABLE #SO_70530036(EmployeeId int NOT NULL);
Keep track of your query because we'll use it later on but as I advocate in my SSIS answers, perform the smallest task, test that it works and then go on to the next. It's the only way to debug.
Connection Managers
Define two OLE DB Connection Managers. WWI_DW uses points to the named instance DEV2019UTF8 and WWI_OLTP points to DEV2019EXPRESS. Right click on WWI_OLTP and select Properties. Find the property RetainSameConnection and flip that from the default of False to True. This ensures the same connection is used throughout the package. As temporary tables go out of scope when the connection goes away, closing and reopening a connection in a package will result in a fatal error.
These two databases on different instances so we can't cheat and directly comingle data.
Variables
Define 4 variables in SSIS, all of type String.
TempTableName - I used a value of ##SO_70530036 but use whatever value you specified in the One-time task section.
QuerySourceEmployees - This will be the query you run to generate the candidate set of data to go into the temporary table. I used SELECT TOP (3) E.[WWI Employee ID] AS EmployeeId FROM Dimension.Employee AS E WHERE E.[Is SalesPerson] = CAST(1 AS bit);
QueryDefineTables - Remember the drop/create statements from the on-time task? We're going to use the essence of them but use the expression builder to let us dynamically swap the table name. I clicked the ellipses, ..., on the Expression section and used the following "DROP TABLE IF EXISTS " + #[User::TempTableName] + "; CREATE TABLE " + #[User::TempTableName] + "( EmployeeId int NOT NULL);" You should be able to copy the Value from the row and paste it into SSMS to confirm it works.
QuerySales - This is the actual query you're going to use to pull your filtered set of sales data. Again, we'll use the Expression to allow us to dynamically reference the temporary table name. The prettified version of the expression would look something like
"SELECT
SI.InvoiceID
, SI.SalespersonPersonID
, SO.OrderID
, SOL.StockItemID
, SOL.Quantity
, SOL.OrderLineID
FROM
Sales.Invoices AS SI
INNER JOIN
Sales.Orders AS SO
ON SO.OrderID = SI.OrderID
INNER JOIN
Sales.OrderLines AS SOL
ON SO.OrderID = SOL.OrderID
WHERE
EXISTS (SELECT * FROM " + #[User::TempTableName] + " AS TT WHERE TT.EmployeeID = SI.SalespersonPersonID);"
Again, you should be able to pull the Value from the three queries and run them independently and verify they work.
Execute SQL Task
Add an Execute SQL task to the Control Flow. I named mine SQL Create temporary table My Connection Manager is WWI_OLTP and I changed the SQLSourceType to Variable and the SourceVariable is User::QueryDefineTables
Every time your package runs, the first thing it will do is establish create the temporary table. Which is good because SSIS is a metadata driven ETL engine and the next two steps would fail if the table didn't exist.
Data Flow Task - Prime the pump
This data flow is where we'll transfer DW data back to the OLTP system so can filter in the source system.
Drag a Data Flow Task onto the Control Flow. I named mine DFT Load Temp and before you click into it, right click on the Task and find the DelayValidation property and change this from the default of False to True. Normally, a package validates all metadata before actual execution begins as the idea is you want to know everything is good before any data starts moving. Since we're using temporary tables, we need to tell the execution engine "trust us, it'll be ready"
Double click inside the Data Flow Task.
Add an OLE DB Source. I named mine OLESRC SourceEmployees I use the connection manager WWI_DW. My data access mode changes to SQL command from variable and then I select my variable User::QuerySourceEmployees
Add an OLE DB Destination. I named mine OLEDST TempTableName and double clicked to configure it. The Connection Manager is WWI_OLTP and again, since the table lives in tempdb, we can't select it from the drop down. Change the Data access mode to Table name or view name variable - fast load and then select your variable name User::TempTableName. Click the Mapping tab and ensure source columns map to destination columns.
Data Flow Task - Transfer data
Finally, we will pull our source data, nicely filtered against the data from our target system.
Add an OLE DB Source. I named it OLESRC QuerySales. The Connection Manager is WWI_OLTP. Data access mode again changes to SQL command from variable and the variable name is User::QuerySales
From here, do whatever else you need to do to make the magic happen.
Instead of having 270k rows with an unfiltered query
I have 67k as there are only 3 employees in the temporary table.
Reference package
But wait, there's more!
Close out visual studio, open it back up and try to touch something in the data flows. Suddenly, there are red Xs everywhere! Any time you close a data flow component, it fires a revalidate metadata operation and guess what, it can't do that as the connection to the temporary table is gone.
The package will run fine, it will not throw VS_NEEDSNEWMETADATA but editing/maintenance becomes a pain.
If you switched from global temporary table to local, switch the table name variable's value back to a global and then run the define statement in SSMS. Once that's done, then you can continue editing the package.
I assure you, the local temporary table does work once you have the metadata set and you use queries via variables for source/destination.
No need for the global temporary table hack, or the SET FMTONLY OFF hack (which no longer works).
Just specify the result set metadata in the SQL query with WITH RESULT SETS. eg
EXEC ('
create table #t
(
ID INT,
Name VARCHAR(150),
Number VARCHAR(15)
)
insert into #t (Id, Name, Number)
select object_id, name, 12
from sys.objects
select * from #t
')
WITH RESULT SETS
(
(
ID INT,
Name VARCHAR(150),
Number VARCHAR(15)
)
)
If you need to parameterize the query, there's a bit of a catch because there are some limitations in how SSIS discovers parameters. SSIS runs sp_describe_undeclared_parameters, which doesn't really work with batches that call sp_executesql, because sp_executesql has a very unique way it handles parameters, one which you couldn't replicate with a user stored procedure.
So to parameterize the query you'll either need to pass the parameter values into the query using the "query from variable" and SSIS expressions, or push all this TSQL into a stored procedure.
ETL Script to dynamically map multiple execute sql resultset to multiple tables (table name based on sql file provided)
I have a source folder with sql files ( I can put it up as stored procedures as well ) . I know how to loop and execute sql tasks in a foreach container. Now the part where I'm stuck is I need to use the final result set of each sql queries and shove it into a table with the same name as the sql file.
So, Folder -> script1.sql , script2.sql etc -> ETL -> goes to table script1, table script2 etc.
EDIT : Based on the comment made by Joe, I just want to say that I'm aware of using insert within a script but I need to insert it onto a table in a different server.And Linked servers are not the ideal solutions
Any psuedocode or link to tutorials will be extremely helpful . Thanks!
I would add the table creation to the script. It is probably the simplest way to do this. If your script is Select SomeField From Table1, you could change it to Select SomeField Into Table script1 From Table1. Then there is no need to map in SSIS which is not easy to do from my experience.
Here is the scenario for which Iam trying to create a SSIS package using VS2013. We have SQLServer2014 servers - A & B.
From ServerA.Database1, need to copy data for few specific tables to ServerB.Database2.
But before copy, have to drop the table and recreate the table at destination (ServerB.Database2) using the table schema from source (ServerA.Database1) because of schema changes happening frequently. Need to schedule this weekly.
How to accomplish using SSIS (how to retrieve source table schema information in the ssis package so that it will be used to create a table at the destination) ? or any other way ?
Thanks
Bhanu.
Add an execute sql task and provide sql text 'Drop table tablename' and then create table tablename (variables and datatypes)
Below approach will require a Linked Server. No need to worry about table schema.
Drop table TargetServer.database.dbo.tablename
Insert * into TargetServer.database.dbo.tablename from SourceServer.database.dbo.tablename
I have created a table called DimInternationalFunction.
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[DimInternationalFunction]') AND type in (N'U'))
DROP TABLE [DimInternationalFunction]
Go
Create Table DimInternationalFunction
(IntFunctionKey int NOT NULL identity primary key,
SubSubFunctionString char(10),
FunctionCode char(3),
SubFunctionCode char(6),
SubSubFunctionCode char(10),
SubSubFunctionName nvarchar(60),
SubFunctionName nvarchar(60),
FunctionName nvarchar(60))
I have initially inserted records in this table in SSMS.
After inserting the initial records manually in SSMS, now my manager wants me to insert "new records only" using SSIS.
I have tried using this in SSMS and it worked. Either it gives me 0 records inserted or sometimes it gives me 5 records inserted as a result. My manager wants me to do this in SSIS.
I tried using this script inside the OLE DB Source under Data Access Mode: SQL Command and SQL Command text:
insert into DWResourceTask.dbo.DimInternationalFunction
select f.SubSubFunctionString,
f.FunctionCode,
f.SubFunctionCode,
f.SubSubFunctionCode,
f.SubSubFunctionName,
f.SubFunctionName,
f.FunctionName
from ODS_Function F
where FunctionViewCode = 'INT'
and not exists (select * from DWResourceTask.dbo.DimInternationalFunction I
where (f.SubSubFunctionString=i.SubSubFunctionString
and f.FunctionCode=i.FunctionCode
and f.SubFunctionCode=i.SubFunctionCode
and f.SubSubFunctionCode=i.SubSubFunctionCode
and f.SubSubFunctionName=i.SubSubFunctionName
and f.SubFunctionName=i.SubFunctionName
and f.FunctionName=i.FunctionName)
)
The error message that I got after clicking preview is
The component reported the following warnings:
Error at Int Function [International Function Table [33]]: No column information was returned by the SQL command.
Choose OK if you want to continue with the operation.
Choose Cancel if you want to stop the operation.
Is there another component in SSIS that can do this? or can I just use either exec sql task component or ole db source?
I am thinking of using exec sql task connected to a data flow task, inside the data flow task I will put ole db source containing a staging table and do a delete on that or is there any other way to do it. Please help. Thanks in advance.
You could do it with an Execute SQL task.
If you want to do it "the pure SSIS way", you could use a lookup component. Set the "rows with no matching" handler to "Redirect to no match output", and configure the target table as connection. Then use the "No Match Output" only, ignoring the "Match Output". And send the records from the "No Match Output" to the target.
In spite of its name, the "Lookup" component can be used to filter data in many cases.
But I would assume the Execute SQL task would be more efficient for large data sets, keeping all data within the database engine.
I have one table named "Staff" in access and also have this table(same name) in SQL 2008.
Both table have thousands of records. I want to merge records from the access table to sql table without affecting the existing records in sql. Normally, I just export using OCBC driver and that works fine if that table doesn't exist in sql server. Please advise. Thanks.
A simple append query from the local access table to the linked sql server table should work just fine in this case.
So, just drop in the first (from) table into the query builder. Then change the query type to append, and you are prompted for the append table name.
From that point on, just drop in the columns you want (do not drop in the PK column, as they need not be used nor transferred in this case).
You can also type in the sql directly in the query builder. Either way, you will wind up with something like:
INSERT INTO dbo_custsql
( ADMINID, Amount, Notes, Status )
SELECT ADMINID, Amount, Notes, Status
FROM custsql1;
This may help: http://www.red-gate.com/products/sql-development/sql-compare/
Or you could write a simple program to read from each data set and do the comparison, adding, updating, and deleting, etc.