We are working to install SCCM 2012 using SQL Server 2008 R2 as our Database Target.
About our environment.
SCCM server is part of of "Domain A" and SQL Server is Part of "Domain B". A two trust is between the two.
SQL Server is running CU 6 (10.50.1765).
I've enabled: Named Pipes, TCIP, Disable Dynamic Ports and set the Port to 1433
SQL Server is running under a named instance
I granted the SCCM Server full access and as well as the domain account being used to do the install.
The default collation is set to "SQL_Latin1_General_CP1_CI_AS
To rule out firewall problems we ran a PS script to test the connectivity to the server\instance and it checked out ok.
We are getting the error.
Setup is unable to connect to SQL Server with the connection information provided. Verify the following:
The sql server and instance names are entered correctly
The specified sql server instance is not configured to use dynamic ports
If a firewall is enabled on the SQL Server, inbound rules exists to allow connection to the correct ports.
The account used to run Setup has permissions to connect to the specified SQL Server Instance.
Any assistance would be greatly appreciated.
Details of the different hotfixes required for different versions of SQL Server can be found here:
http://technet.microsoft.com/en-us/library/gg682077#BKMK_SupConfigSQLDBconfig
Minimum supported configurations include:
SQL Server 2008 SP2 with a minimum of Cumulative Update 9
SQL Server 2008 SP3 with a minimum of Cumulative Update 4
SQL Server 2008 R2 with SP1 and with a minimum of Cumulative Update 6
SQL Server Express (any version) is not supported for System Center Configuration Manager 2012
We finally figured it out.
Things we checked.
Enabled CLR with a query
No dynamic ports on any IP
Upgraded to 2008 R2 CU 6
Added the SCCM Computer as sysadmin with a query
Lastly, if you are in an environment with multiple tenants (we service several school districts) Windows SUS can not be installed and pointing to a different server. The pre-check automatically checks the same DB server as SUS. We uninstalled it (outs was pointing to an older db server) and then it worked like a champ.
Related
I installed SQL Server 2017 Express as a named Instance alongside my default instance. After rebooting once - both were showing but the I could not connect to SQL Server Express remotely. I then followed the instructions to enable IP on SQL Express using configuration manager and rebooted. Now I can connect remotely but my default instance is showing NO databases!
Also in configuration manager, SQL Server Services does not show any of my instances so that I can check they are running (this was the care even prior to enabling the IP address on the protocol, and when I knew it definitely was running as I could connect to it)
--
Update:
I discovered if I launch SQL Server Configuration Manager 2016 rather than "SQL Server Configuration Manager" I can see all my servers.
SQL Server 2016 appears to be running as is SQL Server Express. There is also a "MSSQLServer" that is stopped - think this may be SQL Server 2012. Not sure at this stage which one had the databases.
Ok so for anyone in a similar situation / panic. Do the following.
Look to see what other SQL Server configuration mangers are showing up. If you have installed multiple versions over the years chances are you'll see more than one.
Try using one of the later ones. You can see the file path too if you need it here.
If you manage to see a list of your database servers, check which are enabled and disabled. I had to disable SQL Server (SQLExpress) first before I could enable SQL Server (MSSQLServer), which in my case referred to SQL Server 2012.
If you want to have SQL Server Express running as a named server running alongside your default server, make sure you assign it a different port number (e.g. 1435) in the SQL Server Network Configuration>Protocols for SQL Express>TCP/IPALL section in SQL Server configuration manager.
https://support.microsoft.com/en-us/help/3135244/tls-1.2-support-for-microsoft-sql-server
TLS1.1 and TLS1.2 are the only things I have enabled and I have disabled TSL 1.0 and SSL as seen below:
I have two instances of SQL Servers on my machine: A 2008 SQL Express R2 and a SQL 2014.
With those network settings I can still through SSMS connect to SQL 2014 but NOT to 2008 Express R2
So is that a known thing about SQL Servers? Can you explain what is happening?
The error says that the server was not found, I think you did not use the correct server name, that is, if you have 2 instances, one of them is the default(I think 2014), the other one is a named instance, and if you didn't change the name offered by istallation the instance
name is SQLExpress, so if you connect locally, you can use .\SQLExpress or localhost\SQLExpress or (local)\SQLExpress, if you connect remotely you should use yourCompName\SQLExpress and your SQL Server browser must be started (or you can use yourCompName,port_name instead and use no Browser)
I am trying to understand if it is a requirement to install IIS in order to enable TCP/IP communications in SQL Server Configuration Manager with Microsoft SQL Server 2008 R2.
I would prefer to have the database on its own server with TCP/IP enabled, and then IIS w/ PHP on a 2nd server, that points to the database at another IP address. I just want to confirm that IIS is not required in the database server for this functionality to exist.
Thanks.
IIS and SQL Server both are different and can work independently. You don't require IIS to make sure that your SQL Server is working correctly i.e., they both work independently. However if you want then you can configure IIS with SQL Server. You can follow this link to configure it.
I dont know much about sql server.
I have just re-installed windows 7 on my laptop. After that I installed Visual Studio 2012 Express Edition. I also Installed SQL Server Management Studio 2008 R2.
Now when I try to log in to sql server management studio by using server name as . or (local) or .\SQLEXPRESS or PC-Name\SQLEXPRESS and using Windows Authentication I get the error as below.
Please dont mark this question as negative as I have searched on google for last 4 hours but did not understand the problem.
Update:
There are many reasons that may cautioning the problem:
SQL Server is not running
SQL Server is not properly configured
You try to connect with a worng instance Name
You can try the following:
Go to Mycomputer->Rigt Click->Manage->Application and Services
And from there check that SQL Server Express is running
2.From there also, gCheck the Instance name of your SQL Express and be sure when you log on to Management Studio you Provide the same Instance name
Confirm that the service is installed and running. Under Computer Management, drill-down into Services and Applications -> Services.
There should be a service named "SQL Server (SQLEXPRESS)". Try a restart or start of the service.
If any other instance of SQL Server is installed it will be listed - try connecting to LOCALHOST(whatever the instance is listed as) to verify the installation is functional.
UPDATED following further information from comments:
You may have only installed the client tools (management studio), and have not installed the database service. Ensure you have the correct installer which includes the database services engine.
First check that the SQL Server parameters are set accordingly.
Go to Start -
All Programs — Microsoft SQL Server 2008 R2 — Configuration tools —
SQL Server Configuration Manager
Under SQL Server Services, make sure that the instance is running :
SQL Server ()
SQL Server Browser
Under SQL Server Network Configuration - Protocols for (), these are enabled:
TCP/IP
Named Pipes
Do the same under SQL Native Client 10.0 under Client Protocols
I can connect to a remote SQL 2008 Server instance, but I cannot see all the databases in the instance using SQL Server 2008 Management Studio.
I suspect that my problem has something to do with not all database in the remote instance having the same version. For example, I "upgraded" a 2005 database to 2008 by doing a backup from 2005 and importing it into 2008.
When I realized that this was not one of the database that I could see from my other PC, I noticed that the compatibility level of the imported was still 2005, so I changed it to 2008. Still I could not see the database.
On that remote server, the instance node is named "sql2008", and is "Version 10".
When I connect to the sql2008 remote instance from my local PC, the connection is shown locally as being a "SQL Server Version 8.0" instance.
I suspect that locally, I am only being shown databases that are somehow in the remote 2008 instance but have not been upgraded.
I guess I don't know what constitutes an upgraded database and I don't know how to connect to see all the databases, even if this requires multiple connections from the source PC.
The local machine is Windows 7 Ultimate. The remote host is Windows XP Pro.
Related -not being able to see the SQL Server 2008 instance.
Update:
This is what I see on the remote server using Mgt Studio, namely, a SQL 2008 instance and a 2000 instance.
When I log onto the SQL 2008 instance and perform the following query
SELECT
##VERSION As Version,
SERVERPROPERTY('ComputerNamePhysicalNetBIOS') as ComputerNamePhysicalNetBIOS,
SERVERPROPERTY('ServerName') As ServerName,
SERVERPROPERTY('MachineName') As MachineName
The result re-confirms that the 2008b instance shown above with a version of 10 is a 2008 instance:
Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (Intel X86) Mar 29 2009 10:27:29 Copyright (c) 1988-2008 Microsoft Corporation Developer Edition on Windows NT 5.1 <X86> (Build 2600: Service Pack 3)
USPL-DOKMANC2 USPL-DOKMANC2\SQL2008B USPL-DOKMANC2
OK, now from my LOCAL box, I used SQL Mgt Studio to try and connect to USPL-DOKMANC2 (the remote box.)
alt text http://content.screencast.com/users/Dokmanc/folders/Jing/media/ec146f56-5651-4968-9286-82508dc5d3b2/2010-05-22_1426.png
...I connect to the remote w/o the port I get this error:
alt text http://content.screencast.com/users/Dokmanc/folders/Jing/media/d3c5bc46-c286-4708-a2f5-282fc76124cb/2010-05-22_1427.png
But if I enter the DEFAULT port, I am able to connect. Note that the SQL2008 connection that I just added appears as being version "8" (SQL 2000).
alt text http://content.screencast.com/users/Dokmanc/folders/Jing/media/ea80af5e-4a1f-4417-9327-0b76476b4d14/2010-05-22_1426.png
I seem to be connecting to my SQL2000 instance again even though I specified in my connection params to connect to SQL2008b, a 2008 instance.
I can't seem to see my remote 2008 instance on uspl-dokmanc2. I keep getting my 2000 default instance databases showing up under sql2008b.
2nd Update:
Based on excellenf feedback below that SQL is most likely disregarding the name of the instance when tryingt o connect and determining the instance from the port specified. Now I just need to know the port that the SQL2008b instance is running on. I expected that SQL Mgt Config would tell me. The port is blank. Does this imply a default port? What would it be for 2008, not ethat I already have another 2008 instance, so if they all have to have separate ports, the normal 2008 default is probably not it.
Here's what I see in SQL Mgt Config for the 2008b instance. No port mentioned:
The remote instance (8.0) is a SQL Server 2000 instance
There is no such concept as "database version" that relates to visibility or permissions: every DB on a given server (version, SP and hotfix included) is at some internal version. This is why you can't restore or attach a SQL Server 2008 DB onto SQL Server 2005
I would run this to get the full details
SELECT
##VERSION,
SERVERPROPERTY('ComputerNamePhysicalNetBIOS'),
SERVERPROPERTY('ServerName'),
SERVERPROPERTY('MachineName')
For example, you may have a client alias that means you're connecting to the wrong server.
Also, you have to explicitly DENY ANY VIEW DATABASE TO public to "hide" databases
Are you sure your 2008 instance uses 1433 port? MS SQL seem to disregard a name of a instance and connect with the given port in most cases. Use the Configuration Manager to check the port.
Also, check if the SQL Browser is available from the remote machine - you'll have to add 1434 on UDP to your firewall settings. Remember to make sure that the SQL Browser is running on your server of course. See: http://support.microsoft.com/kb/914277