We've got a SQL Server instance with some 15-20 databases, which we check in TFS with the help of RedGate. I'm working on a script to be able to replicate the instance (so a developer could run a local instance when needed, for example) with the help of these scripts. What I'm worried about is the dependencies between these scripts.
In TFS, RedGate has created these folders with .sql files for each database:
Functions
Security
Stored Procedures
Tables
Triggers
Types
Views
I did a quick test with Powershell, just looping over these folders to execute the sql, but I think that might not always work. Is there a strict ordering which I can follow? Or is there some simpler way to do this? To clarify, I want to be able to start with an completly empty SQL Server instance, and end up with a fully configured one according to what is in the TFS (without data, but that is ok). Using Powershell is not a requirement, so if it is simpler to do some other way, that is preferrable.
If you're already using RedGate they have a ton of articles on how to move changes from source control to database. Here's one which describes moving database code from TFS using sqcompare command-line:
http://www.codeproject.com/Articles/168595/Continuous-Integration-for-Database-Development
If you compare to any empty database it will create the script you are looking for.
The only reliable way to deploy the database from scripts folders would be to use Red Gate SQL Compare. If you run the .sql files using PowerShell, the objects may not be created in the right order. Even if you run them in an order that makes sense (functions, then tables, then views...), you still may have dependency issues.
SQL Compare reads all of the scripts and uses them to construct a "virtual" database in memory, then it calculates a dependency matrix for it so when the deployment script is created, things are done in the correct order. That will prevent SQL Server from throwing dependency-related errors.
If you are using Visual Studio with the database option it includes a Schema Compare that will allow you to compare what is in the database project in TFS to the local instance. It will create a script for you to have those objects created in the local instance. I have not tried doing this for a complete instance.
You might have to at most create the databases in the local instance and then let Visual Studio see that the tables and other objects are not there.
You could also just take the last backup of each database and let the developer restore them to their local instance. However this can vary on each environment depending on security policy and what type of data is in the database.
I tend to just use PowerShell to build the scripts for me. I have more control over what is scripted out when so when I rerun the scripts on the local instance I can do it in the order it needs to be done in. May take a little more time but I get better functioning scripts for me to work with, and PS is just my preference. There are some good scripts already written in the SQL Community that can help you on this. Jen McCown did a blog post of all the post her husband has written for doing just this, right here.
I've blogged about how to build a database from a set of .sql files using the SQL Compare command line.
http://geekswithblogs.net/SQLDev/archive/2012/04/16/how-to-build-a-database-from-source-control.aspx
The post is more from the point of view of setting up continuous integration, but the principles are the same.
Related
I just lost some stored procedures in a test database. So I don't have to go through this again is there a way I can generate a script that I could use to recreate ALL my database objects. I am using the SSMS so I am hoping there's some option with that which will allow me to get a script for recreation of everything.
Right Click (the database in object explorer)
Tasks
Generate Scripts
or use a version control tool or documentation tool from some one like redgate
finally you could simply take regular backups
As suggested, you can generate scripts using management studio for any views or functions but
The ideal way is to keep a repository of every object in SVN , TFS or something similar.
We do it for our dev, test (and off course for prod). We do not treat non-prod environments as non-important.
I'm currently in the process of redesigning our department's source control strategy using Team Foundation Server (TFS) in regard to database objects. Essentially, we store nothing in TFS at this time. I have discovered SSDT and really enjoy their integration within Visual Studio and think it will make our transition into TFS much easier.
So, Does SSDT have the capability of generating scripts based on the delta's of my SSDT project verses what is in our server? It seems from what I have researched, I will only be able to generate an entire database script.
Requirements (Mind you, our developers do not have ddl access to production):
I cannot drop a database to re-create it
I cannot drop ALL objects like all stored procs to re-create them but only what I need
Tables will need to be altered not dropped and only what has changed
Dacpac's are out of the question
Our best option based on our environment at this time is to use scripts for updates
Our database environment is currently SQL Server 2008 R2. My SSDT version is the latest 2013 that was published in June.
Yes, if you do a publish from the project you will pretty much meet all of these requirements, though dacpacs are built as part of the process. The schema compare and pre/post deploy scripts are stored in the dacpac and the publish reads what "should" be present against what is currently in the database. It then generates a change script of all necessary changes to bring the database in line with the project.
Make sure you use the Refactor/Rename when renaming objects - that will cut down on the table drop/recreate operations. You may want to be careful with the "Drop objects not in the project" options. If you haven't been careful with making sure all objects created in your production server are in your project, you could accidentally drop something important just because someone didn't get it checked in.
There are command lines to the SQLPackage command that can generate change detail reports and scripts that you can use. The scripts need to be run through SQLCMD or in SQLCMD mode, but you can definitely produce scripts pretty easily.
I have been working on a project and gotten it through the first stage. However, the requirments ended up changing and I have to add new tables and redo some of the foriegn key references in the DB.
The problem I have is my lack of knowledge of dealing with doing this kind of change to a staging then production database once I get the development done on dev database.
What are some strategies for migrating database schema changes and maintaining data in the database?
About as far as my knowledge is on doing this is open up Sql Server Management Studio and starting adding tables manually. I know this is probably a bad way to do it so looking for how to do it properly while realizing I probably started out wrong.
For maintaining schema changes you can use ApexSQL Diff, a SQL Server and SQL Azure schema comparison and synchronization tool, and for maintaining data in the database you can use ApexSQL Data Diff, a SQL Server and SQL Azure data comparison and synchronization tool.
Hope this helps
Disclaimer: I work for ApexSQL as a Support Engineer
You have to have something called as a "KIT". Obviously, if you are maintaining some kind of a source control, all the scripts for the changes that you do in the development environments should be maintained in the source control configuration tool.
Once you are done with all the scripts/changes that you deem certified to move to next higher environment. Prepare the kit with having all these scripts in folders (ideally categorized as Procedures, Tables, Functions, Bootstraps) And then have a batch files that could execute these scripts in the kit in a particular order using OSQL command line utility.
Have separate batch files for UAT/ Staging/ production so that you can just double click on the batch file to execute the kit in the appropriate server. Check for OSQL options.
This way all your environments are in sync!
I typically use something like the SQL Server Publishing Wizard to produce SQL scripts of the changes. That is a rather simple and easy approach. The major downside with that tool is that the produced will drop and recreate tables that are not changed but used by procedures that have changed (and I can't understand why), so there is some manual labour involved in going through the script and remove things that don't need to be there.
Note that you don't need to download and install this tool; you can launch it from within Visual Studio. Right-click on a connection in the Server Explorer and select "Publish to Provider" in the context menu.
Red Gate SQL Compare and SQL Data Compare all the way. Since my company bought it, it saved me tons of time staging our databases from DEV to TEST to ACCEPTANCE to PRODUCTION.
And you can have it synchronize with a scripts folder too for easy integration in a source control system.
http://www.red-gate.com
You might want to check out a tool like Liquibase: http://liquibase.org/
You can use visual studio 2015. Go to Tools=> SQL server => New Schema comparison
step 1) Select source and target Database.
Click on Compare option.
step 2) once comparison completed, you can click on icon Generate Script(Shift+alt+G)
this will generate Commit script.
step 3) To generate rollback script for database changes just swap database from step 1
There are some tools available to help you with that.
If you have Visual Studio Team edition, check database projects (aka DataDude aka Visual Studio Team for Database Professionals) See here and here
It allows you to generate a model from the dev/integration database and then (for many, but not all cases) automatically create scripts which update your prod database with the changes you made to dev/integration.
For VS 2008, make sure you get the GDR2 patches.
We have found the best way to push changes is to treat databases changes like code. All changes are in scripts, they are in source control and they are part of a version. Nothing is ever under any circumstances pushed to prod that is not scripted and in source control. That way you don't accidentally push changes that are in dev, but not yet ready to be pushed to prod. Further you can restore prod data to the dev box and rerun all the scripts not yet pushed and you have fresh data and all the dev work preserved. This also works great when you have lookup values to tables that are chaging that you don;t want pushed to prod until other things move as well. Script the insert and put it with the rest of the code for the version.
It's nice to use those tools to do a compare to see if something is missed in the scripts, but I would NEVER rely on them alone. Far too much risk of pushing something "not yet ready for prime time" to prod.
A good database design tool (such as Sybase Powerdesigner) will allow you to create the design changes to the data model, then generate the code to implement those changes. You can then store and run the code as you choose. This tool should also be able to do reverse engineering when you inherit a database you didn't build.
Finding all the changes between development and production is often difficult even in an organized, well-documented environment. Idera has a tool for SQL Server which will detect structural differences between your development and production database and another tool which detects changes in the data. In fact, I often use these to go the other direction and sync development with production to start a new project.
Say I have a website and a database of that website hosted locally on my computer (for development) and another database hosted (for production)...ie first I do the changes on the dev db and then I do the changes to the prod DB.
What is the best way to transfer the changes that I did on the local database to the hosted database?
If it matters, I am using MS Sql Server (2008)
The correct way to do this with Visual Studio and SQL Server is to add a Database Project to the web app solution. The database project should have SQL files that can recreate the entire database completely on a new server along with all the necessary tables, procedures users and roles.
That way, they are included in the source control for all the rest of the code as well.
There is a Changes sub-folder in the Database Project where I put the SQL files that apply any new alterations or additions to the database for subsequent versions.
The SQL in the files should be written with proper "if exists" blocks such that it can be run safely multiple times on an already updated database without error.
As a rule, you should never make your changes directly in the database - instead modify the SQL script in the project and apply it to the database to make sure your source code (the SQL files) is always up to date.
We do this in the (Ruby on) Rails world by writing "migrations," which capture the changes you make to the DB structure at each point. These are run with a migration tool (a task for rake), which also writes to a DB table so it knows whether a particular migration has been run or not.
You could make a structure like this for your dev platform (.Net?), but I think that in other answers to this question people will suggest available tools for handling database versioning in your development platform, or perhaps for your specific DB.
I don't know any of these, but check out this list. I see a lot of pay things out there, but there must be something free. Also check this out.
I migrate changes via change scripts written by developers when they have tested/verified their changes. (The exception being moving large data.) All scripts are stored in a Source control system. and can be verified by DBAs.
It is manual, sometime time consuming but effective, safe and controled process.
Databases are too vital to copy from dev.
There are tools to help create/verify these scripts.
See http://www.red-gate.com/
I have used their tools to compare 2 databases to create scripts.
Brian
If the changes are small, I sometimes make them by hand. For larger changes, I use Red Gate's SQL Compare to generate change scripts. These are hand-verified and run in the QA environment first to make sure they don't break anything. For large changes, we run a special backup prior to making the change both in QA and in production.
We used to use the approach provided by Ron. It makes sense for a big project with dedicated team of DBAs. But if you do not have a dedicated developers who write code only for DB this approach is time and resource expensive.
The approach to use RedGate DB compare is also not good. You still have a do a lot of manual work you can skip some step by mistake.
It needs something better. This is was the reason why we built the "Agile DB Recreation/Import/Reverse/Export tool"
The tool is free.
Advantages: your developers use any prefered tools to develop DEV DB. Then they run the DB RIRE and it makes reverseengeniring DB (tables, views, stor proc, etc) and export data into XML files. XML files you can keep in the any code repository system.
And the second step is to run DB RIRE one more time to generate difference scripts between structure and data in XML files and in Production DB.
Of course you can make as much iterations as you need.
I wonder how you guys manage deployment of a database between 2 SQL Servers, specifically SQL Server 2005.
Now, there is a development and a live one. As this should be part of a buildscript (standard windows batch, even do with current complexity of those scripts, i might switch to PowerShell or so later), Enterprise Manager/Management Studio Express do not count.
Would you just copy the .mdf File and attach it? I am always a bit careful when working with binary data, as this seems to be a compatiblity issue (even though development and live should run the same version of the server at all time).
Or - given the lack of "EXPLAIN CREATE TABLE" in T-SQL - do you do something that exports an existing database into SQL-Scripts which you can run on the target server? If yes, is there a tool that can automatically dump a given Database into SQL Queries and that runs off the command line? (Again, Enterprise Manager/Management Studio Express do not count).
And lastly - given the fact that the live database already contains data, the deployment may not involve creating all tables but rather checking the difference in structure and ALTER TABLE the live ones instead, which may also need data verification/conversion when existing fields change.
Now, i hear a lot of great stuff about the Red Gate products, but for hobby projects, the price is a bit steep.
So, what are you using to automatically deploy SQL Server Databases from Test to Live?
I've taken to hand-coding all of my DDL (creates/alter/delete) statements, adding them to my .sln as text files, and using normal versioning (using subversion, but any revision control should work). This way, I not only get the benefit of versioning, but updating live from dev/stage is the same process for code and database - tags, branches and so on work all the same.
Otherwise, I agree redgate is expensive if you don't have a company buying it for you. If you can get a company to buy it for you though, it really is worth it!
For my projects I alternate between SQL Compare from REd Gate and the Database Publishing Wizard from Microsoft which you can download free
here.
The Wizard isn't as slick as SQL Compare or SQL Data Compare but it does the trick. One issue is that the scripts it generates may need some rearranging and/or editing to flow in one shot.
On the up side, it can move your schema and data which isn't bad for a free tool.
Don't forget Microsoft's solution to the problem: Visual Studio 2008 Database Edition. Includes tools for deploying changes to databases, producing a diff between databases for schema and/or data changes, unit tests, test data generation.
It's pretty expensive but I used the trial edition for a while and thought it was brilliant. It makes the database as easy to work with as any other piece of code.
Like Rob Allen, I use SQL Compare / Data Compare by Redgate. I also use the Database publishing wizard by Microsoft. I also have a console app I wrote in C# that takes a sql script and runs it on a server. This way you can run large scripts with 'GO' commands in it from a command line or in a batch script.
I use Microsoft.SqlServer.BatchParser.dll and Microsoft.SqlServer.ConnectionInfo.dll libraries in the console application.
I work the same way Karl does, by keeping all of my SQL scripts for creating and altering tables in a text file that I keep in source control. In fact, to avoid the problem of having to have a script examine the live database to determine what ALTERs to run, I usually work like this:
On the first version, I place everything during testing into one SQL script, and treat all tables as a CREATE. This means I end up dropping and readding tables a lot during testing, but that's not a big deal early into the project (since I'm usually hacking the data I'm using at that point anyway).
On all subsequent versions, I do two things: I make a new text file to hold the upgrade SQL scripts, that contain just the ALTERs for that version. And I make the changes to the original, create a fresh database script as well. This way an upgrade just runs the upgrade script, but if we have to recreate the DB we don't need to run 100 scripts to get there.
Depending on how I'm deploying the DB changes, I'll also usually put a version table in the DB that holds the version of the DB. Then, rather than make any human decisions about which scripts to run, whatever code I have running the create/upgrade scripts uses the version to determine what to run.
The one thing this will not do is help if part of what you're moving from test to production is data, but if you want to manage structure and not pay for a nice, but expensive DB management package, is really not very difficult. I've also found it's a pretty good way of keeping mental track of your DB.
If you have a company buying it, Toad from Quest Software has this kind of management functionality built in. It's basically a two-click operation to compare two schemas and generate a sync script from one to the other.
They have editions for most of the popular databases, including of course Sql Server.
I agree that scripting everything is the best way to go and is what I advocate at work. You should script everything from DB and object creation to populating your lookup tables.
Anything you do in UI only won't translate (especially for changes... not so much for first deployments) and will end up requiring a tools like what Redgate offers.
Using SMO/DMO, it isn't too difficult to generate a script of your schema. Data is a little more fun, but still doable.
In general, I take "Script It" approach, but you might want to consider something along these lines:
Distinguish between Development and Staging, such that you can Develop with a subset of data ... this I would create a tool to simply pull down some production data, or generate fake data where security is concerned.
For team development, each change to the database will have to be coordinated amongst your team members. Schema and data changes can be intermingled, but a single script should enable a given feature. Once all your features are ready, you bundle these up in a single SQL file and run that against a restore of production.
Once your staging has cleared acceptance, you run the single SQL file again on the production machine.
I have used the Red Gate tools and they are great tools, but if you can't afford it, building the tools and working this way isn't too far from the ideal.
I'm using Subsonic's migrations mechanism so I just have a dll with classes in squential order that have 2 methods, up and down. There is a continuous integration/build script hook into nant, so that I can automate the upgrading of my database.
Its not the best thign in the world, but it beats writing DDL.
RedGate SqlCompare is a way to go in my opinion. We do DB deployment on a regular basis and since I started using that tool I have never looked back.
Very intuitive interface and saves a lot of time in the end.
The Pro version will take care of scripting for the source control integration as well.
I also maintain scripts for all my objects and data. For deploying I wrote this free utility - http://www.sqldart.com. It'll let you reorder your script files and will run the whole lot within a transaction.
I agree with keeping everything in source control and manually scripting all changes. Changes to the schema for a single release go into a script file created specifically for that release. All stored procs, views, etc should go into individual files and treated just like .cs or .aspx as far as source control goes. I use a powershell script to generate one big .sql file for updating the programmability stuff.
I don't like automating the application of schema changes, like new tables, new columns, etc. When doing a production release, I like to go through the change script command by command to make sure each one works as expected. There's nothing worse than running a big change script on production and getting errors because you forgot some little detail that didn't present itself in development.
I have also learned that indexes need to be treated just like code files and put into source control.
And you should definitely have more than 2 databases - dev and live. You should have a dev database that everybody uses for daily dev tasks. Then a staging database that mimics production and is used to do your integration testing. Then maybe a complete recent copy of production (restored from a full backup), if that is feasible, so your last round of installation testing goes against something that is as close to the real thing as possible.
I do all my database creation as DDL and then wrap that DDL into a schema maintainence class. I may do various things to create the DDL in the first place but fundamentally I do all the schema maint in code. This also means that if one needs to do non DDL things that don't map well to SQL you can write procedural logic and run it between lumps of DDL/DML.
My dbs then have a table which defines the current version so one can code a relatively straightforward set of tests:
Does the DB exist? If not create it.
Is the DB the current version? If not then run the methods, in sequence, that bring the schema up to date (you may want to prompt the user to confirm and - ideally - do backups at this point).
For a single user app I just run this in place, for a web app we currently to lock the user out if the versions don't match and have a stand alone schema maint app we run. For multi-user it will depend on the particular environment.
The advantage? Well I have a very high level of confidence that the schema for the apps that use this methodology is consistent across all instances of those applications. Its not perfect, there are issues, but it works...
There are some issues when developing in a team environment but that's more or less a given anyway!
Murph
I'm currently working the same thing to you. Not only deploying SQL Server databases from test to live but also include the whole process from Local -> Integration -> Test -> Production. So what can make me easily everyday is I do NAnt task with Red-Gate SQL Compare. I'm not working for RedGate but I have to say it is good choice.