G'day, I am trying to make a clone of the WordPress website into my local server. I installed the Duplicator plugin and generated a archive file of the website and the installer.php. Then after ran the installer.php from http://localhost:8888/untitledfolder/installer.php.
In the step 2 (Install Database) there is an error which is a connection failure. I already created a database named 'livewebsite' beforehand. It's likewise the below image.
Any help would be really appreciated though I am new to WordPress trying to learn from the scratch. No down votes for the question please. Thank you! :)
I got the issue. That was my username and password. Username & password should be default data which is root and 123 for my settings. Thank you!
You should change MySQL port (the right input with localhost) from 8888 to 3306. That's the real port of MySQL server.
After change and retry, you can see the Host: Fail will become Host: Success with green flag I think. If Database still have a red fail flag, please edit your database username and password. It's not your WordPress account.
I'm developing chat application, I'm using ejabberd for my project. I installed ejabberd server(16.06) successfully and it performing good in auth method as internal. But it is not working when I'm changed auth method as sql. These are the things I'm changed in ejabberd.yml file
default_db: sql
auth_method: sql
## ODBC compatible or MSSQL server:
##
sql_type: mssql
sql_server: "Server=azure_server_name;DSN=DB_Name;UID=azure_DB_username;PWD=azure_DB_password"
sql_pool_size: 10
sql_keepalive_interval: 28800
mod_mam:
iqdisc: one_queue
db_type: sql
default: always
I'm getting following error for while I'm register new user and admin login into web admin portal
ejabberd_auth:is_user_exists:316 The authentication module ejabberd_auth_sql returned an error
when checking user <<"newuser">> in server <<"localhost">>
Error message: {timeout,{p1_fsm,sync_send_event,[<0.390.0>,{sql_cmd,{sql_query,{sql_query,<<"Q9525209">>,#Fun<sql_queries.9.38301790>,#Fun<sql_queries.10.38301790>,#Fun<sql_queries.11.38301790>,{sql_queries,145}}},3534866},60000]}}
I'm used register command:
bin>ejabberdctl register "newuser" "localhost" "password"
Thanks in advance. Please add your ideas and suggestions to resolve this issue.
Again- I am no Ejabberd expert- I imagine someone might have more experience with this; However, it seems that you're confusing Register which I assume is an action to create a login on the Ejabberd platform with the login that is being used on the database. (Or I'm misinterpreting your comments. One of the two.)
You will need to use a username/password combination that exists on the Azure SQL Database in your connection string.
Additionally, you might try the following connection string :
sql_server:"Server=tcp:azure_server_name.database.windows.net;DSN=DB_Name;UID=azure_DB_username;PWD=azure_DB_password"
I set up PGAdmin III with my Heroku database.
I was wondering how I can see my Users database. I am still building my website so I wanted to test how they are being registered in the database.
However, all I see is tons of databases with strange "d10abc111ldlapsaman"-like names. How do I access my User database?
If PGAdmin III is not the right tool for this - what tool should I get to see my users of my still - in -development Heroku application?
You may have figured out your issue by now, but what you want to do is go to https://postgres.heroku.com. Look at your default connection settings for your database. Now, do the following in pgAdmin III using these settings:
File -> Add Server
Name: anything you want
Host: ec2-xx-xxx-xxx-xxx.compute-1.amazonaws.com
Port: 5432
Maintenance DB: yourdbname (in your example it would be d10abc111ldlapsaman)
Username: uiuskwljksjdkje (change to yours)
Password: sdjfj3##f333edfs (change to yours)
The other settings can stay at what they initially were.
You should no be connected to the server. Expand it and scroll through the long list until you find your database name (the one that you put as Maintenance DB).
You're done!
Updating the answer for someone who still needs it, like me:
Go to your heroku account and find your database credentials (you should open your app, then postgres on add-ons and finally settings):
screenshot
In pgadmin you should right-click on 'servers'-> create -> server and enter your credentials:
General/Name: the name that pgadmin will show (only for you)
Connection/Host name: Host in credentials
Connection/Port: Port in credentials (probably 5432)
Connection/Maintenance database: Database in credentials
Connection/Username: User in credentials
Connection/Password: Password in credentials (tip: check the box to save it)
SSL/SSL mode: Require
Advanced/DB restriction: your database (same as maintenance db) -> this will filter only your db of the many others that will spam if you don't do that.
Want to improve this post? Provide detailed answers to this question, including citations and an explanation of why your answer is correct. Answers without enough detail may be edited or deleted.
I'm trying to install SQL Server 2008 development server on my local machine as administrator.
During the installation I receive this error, any idea how to solve it?thanks
[Error Message]
The credentials you provided for the SQL Server Agent service are invalid. To continue, provide a valid account and password for the SQL
Server Agent service.
[Details]
Microsoft.SqlServer.Configuration.Agent.InputValidationException: The credentials you provided for the SQL Server Agent service are
invalid. To continue, provide a valid account and password for the SQL
Server Agent service.
Use the credential that you use to login to PC. Username can be searched by Clicking in sequence
Advanced -> Find -> Choose your Username -> (e.g. JOHNSMITH_HP/John)
Password must be same as your windows login password
There you go !!
I solved using as credential built-in accounts as the NetworkService
this article point me out in the right direction
http://www.sqlcoffee.com/SQLServer2008_0013.htm
Under the "Account Name" Drop Box choose Browse.
Type the user name that you used to log in to windows on the
"Enter the object name to select" and then click "Check Names".
Click "Ok".
Under "Password" just type the password that you used for windows login.
In my case it was more of a Microsoft bug, than an actual issue. I installed under the Administrator login and used strong password btw but I was still getting this error constantly.
I tried to install with Windows credential without entering the password, but that did not go through either. Was getting the same error.
Then I cleared all password textboxes manually and copies the correct password in each text box. Hit enter, and it went through.
The error was most likely misleading.
There seem to be several problems that can cause this symptom. To tell them apart, one needs to look in the setup log files in %PROGRAMFILES%\Microsoft SQL Server\[versionnumber]\Setup Bootstrap\Log, probably Detail.txt.
According to this article, when running the installer as a local administrator and trying to use a domain account for the service, it may claim that the credentials are invalid because the local administrator does not have sufficient permissions in the domain to look up the service account's SID. This was the main problem I was encountering, and it might be what was affecting the original poster a year and a half ago.
I've had this error as a result of trying to use a cloned VM that had the same SID as the domain. The two options to fix it were: sysprep (or rebuild) the database server OR dcpromo the DC down and back up to change the domain SID.
I found I had to be logged in as a domain user.
It gave me this error when I was logged in as local machine Administrator and trying to add domain service account.
Logged in as domain user (but admin on machine) and it accepted the credentials.
In my case password was expired. Change the password and try the step again.
Well I have been battling to understand why, when at the Account section of the installation of a second node, the system will not accept the password I used to log in. I have been scratching my head - reading every post under the sun all to no avail.
I did notice that some service accounts were given as service.instname.instno#FDNdomain.com and others were given as DOMAIN\service.instname.instno (the latter being the Win2000 version)
I also noticed comments about strength of password so I thought - I can do that so I changed the password to a much higher strength and RDC in to the server - with new password and thought - best to update the services on the existing node first. I stopped the service, clicked on password and pasted in from the clipboard - (can't go wrong eh?) ha ha says Windows.. Got ya.. it wouldn't accept the password - that I just logged in with. I clicked on browse to select the service account and VOILA! the account name changed to the DOMAIN\user version and readily accepted the password. I then repeated the exercise on the other service. I then found that the node installation would continue (after backing up and forward through the process) to pick up the new name format and accepted the passwords without complaint.
I think the moral of this experience is to use the wizards and select through the "browse" button rather than manually entering the service name.
I hope my experience saves someone else the pain I went through.
Still Confused
I had a domain account with a strong password, but it didn´t work, then I used Network Service account. I tried to change it on SQL Server Configuration Manager after installation and it worked.
Taking SQL Server cluster role offline-Online on node 1 worked for me.
I had a VM that was server 2012 and I had to change the nic to VMXNET 3. It wasn't connecting to the domain fast enough for the services to start I guess.
the button 'Use same account' below thee main window will fill in all the textboxes automatically. this worked fpr me.
You might encounter one of these three problems:
Password Policy Violation, find valuable information here: https://msdn.microsoft.com/en-us/library/ms161959.aspx
Password not starting with a "character"
Domain Service User's account might be locked.
A blog post with the summary for all three possible problems might be found here:
https://cms4j.wordpress.com/2016/11/29/0x851c0001-the-credentials-you-provided-for-the-sqlserveragent-service-is-invalid/
I'm building the blog project example shown in the "definitive guide of symfony" (chapter 8: the model) on official webpage.
When i do operations that affects the database (like save();) in symfony, this message appears:
Unable to open PDO connection [wrapped: SQLSTATE[28000] [1045] Access denied for user 'root'#'localhost' (using password: NO)]
I tried to find errors in propel configuration files and nothing found. I just did what the guide says, nothing else. Maybe i need to create by command line the database or something like.
You need to properly configure databases.yml with a valid user and password for your MySQL server. Right now it's trying to connect as the root user with no password, and it appears that's not valid for your local MySQL configuration.