C- Socket : Programming a Client/Server-Application to send a file - c

I want to program an application to send a file with sockets:
Here my Server:
void str_server(int sock)
{
char buf[1025];
const char* filename="test.text";
FILE *file = fopen(filename, "rb");
err_abort("Test");
while (!feof(file))
{
int rval = fread(buf, 1, sizeof(buf), file);
send(sock, buf, rval, 0);
}
}
and here my client:
void RecvFile(int sock, const char* filename)
{
int rval;
char buf[0x1000];
FILE *file = fopen(filename, "wb");
while ((rval = recv(sock, buf, sizeof(buf), 0)) > 0)
{
fwrite(buf, 1, rval, file);
}
close(sock);
}
My problem is that my client create a file....but dont write the content in the file!

Add some error handling to your code, that should help you track down the problem. Also note that send(), recv(), fread() and fwrite() are not guaranteed to write/read the entire buffer you specify, so you should take that into account as well.
Also, since TCP is a byte stream, the server needs to indicate when the file ends so the client knows when to stop reading. If you don't send the file size before sending the actual file, the only option is to close the socket when the transfer is done.
Try something like this:
int send_all(int sock, const void *buf, int len)
{
const char *pbuf = (const char *) buf;
while (len > 0)
{
int sent = send(sock, pbuf, len, 0);
if (sent < 1)
{
// if the socket is non-blocking, then check
// the socket error for WSAEWOULDBLOCK/EAGAIN
// (depending on platform) and if true then
// use select() to wait for a small period of
// time to see if the socket becomes writable
// again before failing the transfer...
printf("Can't write to socket");
return -1;
}
pbuf += sent;
len -= sent;
}
return 0;
}
void str_server(int sock)
{
char buf[0x1000];
const char* filename = "test.text";
struct stat s;
if (stat(filename, &s) == -1)
{
printf("Can't get file info");
return;
}
FILE *file = fopen(filename, "rb");
if (!file)
{
printf("Can't open file for reading");
return;
}
// if you need to handle files > 2GB,
// be sure to use a 64bit integer, and
// a host-to-network function that can
// handle 64bit integers...
long size = s.st_size;
long tmp_size = htonl(size);
if (send_all(sock, &tmp_size, sizeof(tmp_size)) == 0)
{
while (size > 0)
{
int rval = fread(buf, 1, min(sizeof(buf), size), file);
if (rval < 1)
{
printf("Can't read from file");
break;
}
if (send_all(sock, buf, rval) == -1)
break;
size -= rval;
}
}
fclose(file);
}
int write_all(FILE *file, const void *buf, int len)
{
const char *pbuf = (const char *) buf;
while (len > 0)
{
int written = fwrite(pbuf, 1, len, file);
if (written < 1)
{
printf("Can't write to file");
return -1;
}
pbuf += written;
len -= written;
}
return 0;
}
int read_all(int sock, void *buf, int len)
{
char *pbuf = (char *) buf;
int total = 0;
while (len > 0)
{
int rval = recv(sock, pbuf, len, 0);
if (rval < 0)
{
// if the socket is non-blocking, then check
// the socket error for WSAEWOULDBLOCK/EAGAIN
// (depending on platform) and if true then
// use select() to wait for a small period of
// time to see if the socket becomes readable
// again before failing the transfer...
printf("Can't read from socket");
return -1;
}
if (rval == 0)
{
printf("Socket disconnected")
return 0;
}
pbuf += rval;
len -= rval;
total += rval;
}
return total;
}
void RecvFile(int sock, const char* filename)
{
int rval;
char buf[0x1000];
FILE *file = fopen(filename, "wb");
if (!file)
{
printf("Can't open file for writing");
return;
}
// if you need to handle files > 2GB,
// be sure to use a 64bit integer, and
// a network-to-host function that can
// handle 64bit integers...
long size = 0;
if (read_all(sock, &size, sizeof(size)) == 1)
{
size = ntohl(size);
while (size > 0)
{
rval = read_all(sock, buf, min(sizeof(buf), size));
if (rval < 1)
break;
if (write_all(file, buf, rval) == -1)
break;
}
}
fclose(file);
}

Related

Changing STDOUT to file in ncat source code

I managed to compile ncat. I am using -k option to keep server open. Instead of accepting data to STDOUT, my goal is to write to files instead. So far I was able to write to a file instead of STDOUT but my goal is to loop through new files on each new connection. Right now it is appending to the same filename_0 and f++ is not incrementing. Here is what I have so far. The original code will be below. The difference is in the else clause, basically if n is actually greater than 0. On each loop, n is 512 bytes until the last chunk. I just want to be able to have new files from each new connection. filename_0, filename_1, filename_3, etc.
MODIFIED CODE:
/* Read from a client socket and write to stdout. Return the number of bytes
read from the socket, or -1 on error. */
int read_socket(int recv_fd)
{
char buf[DEFAULT_TCP_BUF_LEN];
struct fdinfo *fdn;
int nbytes, pending;
int f = 0;
fdn = get_fdinfo(&client_fdlist, recv_fd);
ncat_assert(fdn != NULL);
nbytes = 0;
do {
int n, s;
n = ncat_recv(fdn, buf, 512, &pending);
if (n <= 0) {
if (o.debug)
logdebug("Closing fd %d.\n", recv_fd);
#ifdef HAVE_OPENSSL
if (o.ssl && fdn->ssl) {
if (nbytes == 0)
SSL_shutdown(fdn->ssl);
SSL_free(fdn->ssl);
}
#endif
close(recv_fd);
checked_fd_clr(recv_fd, &master_readfds);
rm_fd(&client_fdlist, recv_fd);
checked_fd_clr(recv_fd, &master_broadcastfds);
rm_fd(&broadcast_fdlist, recv_fd);
conn_inc--;
if (get_conn_count() == 0)
checked_fd_clr(STDIN_FILENO, &master_readfds);
return n;
}
else {
char filename[20];
snprintf(filename, sizeof(char) * 20, "filename_%i", f);
FILE *fp = fopen(filename, "a");
if (fp == NULL)
{
printf("Could not open file");
return 0;
}
//Write(STDOUT_FILENO, buf, n);
s = fwrite(buf, 1, n, fp);
fclose(fp);
f++;
nbytes += n;
}
} while (pending);
return nbytes;
}
ORIGINAL CODE:
int read_socket(int recv_fd)
{
char buf[DEFAULT_TCP_BUF_LEN];
struct fdinfo *fdn;
int nbytes, pending;
fdn = get_fdinfo(&client_fdlist, recv_fd);
ncat_assert(fdn != NULL);
nbytes = 0;
do {
int n;
n = ncat_recv(fdn, buf, sizeof(buf), &pending);
if (n <= 0) {
if (o.debug)
logdebug("Closing fd %d.\n", recv_fd);
#ifdef HAVE_OPENSSL
if (o.ssl && fdn->ssl) {
if (nbytes == 0)
SSL_shutdown(fdn->ssl);
SSL_free(fdn->ssl);
}
#endif
close(recv_fd);
checked_fd_clr(recv_fd, &master_readfds);
rm_fd(&client_fdlist, recv_fd);
checked_fd_clr(recv_fd, &master_broadcastfds);
rm_fd(&broadcast_fdlist, recv_fd);
conn_inc--;
if (get_conn_count() == 0)
checked_fd_clr(STDIN_FILENO, &master_readfds);
return n;
}
else {
Write(STDOUT_FILENO, buf, n);
nbytes += n;
}
} while (pending);
return nbytes;
}
I was able to figure out using the other functions involved. i passed a pointer into this function to write to it. the handler is a function i added the open() file pointer to.

how to send image files through http?

I'm learning the socket programming and trying to write a simple http server with c. My program can load html/css/javascript files correctly, but the image files can't be loaded. For example, the website icon favicon.ico and <img> of the html file always failed to load. I'm using the code as below to build my simple server:
server.c:
#define CYAN(format, ...) \
printf("\033[1;36m" format "\33[0m\n", ## __VA_ARGS__)
struct sockaddr_in s_addr;
struct sockaddr_in c_addr;
socklen_t c_addr_size;
int s_sock;// server socket
int c_sock;// clinet socket
char buf[4096];// user agent
char msg[4096];// file content
char head[1024];// http header
char file[128];// which file requested
void init_server();
void read_request();
void send_file();
int main()
{
init_server();
while (1) {
c_sock = accept(s_sock, NULL, NULL);
if (c_sock != -1) {
int nread = recv(c_sock, buf, sizeof(buf), 0);
read_request();// TODO
CYAN("%d", nread);
CYAN("%s", buf);
send_file();
close(c_sock);
}
}
close(s_sock);
return 0;
}
void init_server()
{
s_sock = socket(AF_INET, SOCK_STREAM, 0);
assert(s_sock != -1);
s_addr.sin_family = AF_INET;
s_addr.sin_addr.s_addr = inet_addr("127.0.0.1");
s_addr.sin_port = htons(8000);
int res = bind(s_sock, (struct sockaddr*)&s_addr, sizeof(s_addr));
if (res == -1) { perror("cannot bind"); exit(-1); }
listen(s_sock, 10);// TODO
c_addr_size = sizeof(c_addr);
}
void read_request()
{
int buf_len = strlen(buf);
int i = 0, j = 0;
for (i = 0; i < buf_len - 10; i ++) {
if (buf[i] == 'G' && buf[i + 1] == 'E' && buf[i + 2] == 'T') {// `GET` keyword
i = i + 4;// skip space
while (buf[i] != ' ') {
file[j] = buf[i];
j ++, i ++;
}
file[j] = '\0';
CYAN("%s", file);
return;
}
}
}
void send_file()
{
if (strcmp(file, "/") == 0) {
sprintf(file, "index.html");
is_html = 1;
} else {
sprintf(file, "%s", file + 1);// skip `/`
}
FILE *fp = fopen(file, "r");
// count file length
int file_len = 0;
while (fgets(msg, 1000, fp)) {// read by lines
file_len += strlen(msg);
}
// send http header
sprintf(head,
"HTTP/1.1 200 OK\n"
// "Content-Type: text/html\n"
"Content-Length: %d\n"
"\n", file_len
);
// send file content
CYAN("%d", fseek(fp, 0, SEEK_SET));
memset(msg, 0, sizeof(msg));
send(c_sock, head, strlen(head), 0);
while (fgets(msg, 1000, fp)) {// read by lines
send(c_sock, msg, strlen(msg), 0);
}
fclose(fp);
}
I'm not familiar with http, and I don't know whether I should change the content of the http header when sending images files. How to correct my code, can anyone help me?
FILE *fp = fopen(file, "r");
// count file length
int file_len = 0;
while (fgets(msg, 1000, fp)) {// read by lines
file_len += strlen(msg);
}
No. No. No. No. Never use text processing on binary data.
File length is easy.
FILE *fp = fopen(file, "rb");
fseek(fp, 0, SEEK_END);
long file_len = ftell(fp);
fseek(fp, 0, SEEK_SET);
Now to send it:
send_helper(c_sock, head, strlen(head), 0); /* send header */
while (file_len > 4096) {
int delta = fread(msg, 4096, 1, fp);
if (delta == 0) {
/* handle error */
fclose(fp);
/* need to refactor here; c_sock is useless and needs to be closed */
return;
}
send_helper(c_sock, msg, delta);
file_len -= delta;
}
if (file_len > 0) {
/* last chunk; fread only returns a short count on an actual error so no loop here */
int delta = fread(msg, 4096, 1, fp);
if (delta == 0) {
/* handle error */
fclose(fp);
/* need to refactor here; c_sock is useless and needs to be closed */
return;
}
send_helper(c_sock, msg, delta);
}
fclose(fp);
Unlike fread, send needs a loop to ensure all bytes are sent.
void send_helper(int c_sock, char *msg, size_t size)
{
while (size > 0)
{
ssize_t delta = sendto(c_sock, msg, size, 0);
/*
* not bothering to handle error well--
* we'll just error a few more times and drop out of loop anyway.
* You probably should come back and fix this later though
*/
if (delta <= 0) return;
size -= (size_t)delta;
msg += (size_t)delta;
}
}

C Programming Sending File over Socket issues

I'm trying to setup a client and a server program where the client can download a file from the server.
I have got the client to download a .txt file however, the .txt file is only created, none of the data within it is transferred.
I've figured out the error is either from when the server sends the size of the file to the client OR the client is failing to recognize where the EOF is.
This is my server side code:
int send_all(int clientSocket, const void *buffer, int len) {
const char *pbuf = (const char *) buffer;
while(len > 0) {
int sent = send(clientSocket, pbuf, len, 0);
printf("%d\n", sent);
if(sent < 1) {
printf("%s\n", "Can't write to socket");
return -1;
}
pbuf += sent;
len -= sent;
}
return(0);
}
void SendFileToClient(int clientSocket, char* fileName) {
//int offset;
char buffer[0x1000];
char temp[512] = "/root/Documents/";
const char* filename = fileName;
struct stat s;
strcat(temp, filename);
printf("%s\n", temp);
//append the filenameonto the directory
if(stat(temp, &s) == -1) {
printf("%s\n", "Can't get file info");
return;
}
FILE *file = fopen(temp, "rb");
if(!file) {
printf("%s\n", "Can't open the file for reading");
return;
}
off_t size = s.st_size;
off_t tmp_size = ntohl(size);
if(send_all(clientSocket, &tmp_size, sizeof(tmp_size)) == 0) {
while(size > 0) {
printf("%ld\n", size);
int rval = fread(buffer, 1, min(sizeof(buffer), size), file);
if(rval < 1) {
printf("%s\n", "Cant read from file");
break;
}
if (send_all(clientSocket, buffer, rval) == -1)
break;
size -= rval;
}
}
fclose(file);
}
This is my client side code:
int write_all(FILE *file, const void *buffer, int len) {
const char *pbuf = (const char *) buffer;
while (len > 0) {
int written = fwrite(pbuf, 1, len, file);
if(written < 1) {
printf("%s\n", "Cant write to file");
return -1;
}
pbuf += written;
len -= written;
}
return 0;
}
int read_all(int clientSocket, void *buffer, int len) {
char *pbuf = (char *) buffer;
int total = 0;
while (len > 0) {
int rval = recv(clientSocket, pbuf, len, 0);
if(rval < 0) {
printf("%s\n", "Cant read from socket");
return -1;
}
if(rval == 0) {
printf("%s\n", "Socket disconnected");
return 0;
}
pbuf += rval;
len -= rval;
total += rval;
}
return total;
}
void RecvFile(int clientSocket, const char* filename) {
int rval;
char buffer[0x1000];
//printf("%s\n", filename);
FILE *file = fopen(filename, "wb");
if(!file) {
printf("%s\n", "Cant open file for writing");
return;
}
off_t size = 0;
//this statement is not working
if(read_all(clientSocket, &size, sizeof(size)) == 1) {
size = ntohl(size);
printf("%s%ld\n", "size: ", size);
while(size > 0) {
rval = read_all(clientSocket, buffer, min(sizeof(buffer), size));
printf("%s%d\n", "rval: ", rval);
if(rval < 1)
break;
if(write_all(file, buffer, rval) == -1) {
printf("%s\n", "Cant write to file");
break;
}
}
}
printf("%s\n", "closing file...");
fclose(file);
}
My apologies if the code looks a bit messy - for some reason it didn't paste in with nice formatting.
I believe this is where part of the problem is, but even through various debugging I can't seem to get it to work :(
//this statement is not working
if(read_all(clientSocket, &size, sizeof(size)) == 1) {
Thanks in advance for any help!

RSA encryption/decryption of long files

I want to encrypt/decrypt a long file with RSA (I know AES is better, but this is just for a comparison) in openssl/libcrypto. I am splitting the input file into blocks of size numBlocks = inputFileLength/maxlen+1 where maxlen = 200. I can successfully encode and decode in the same loop as follows:
for (int i = 0; i < chunks; i++)
{
int bytesDone = i * maxlen;
int remainingLen = inLength - bytesDone;
int thisLen;
if (remainingLen > maxlen)
{
thisLen = maxlen;
} else
{
thisLen = remainingLen;
}
if((encBytes=RSA_public_encrypt(thisLen, data + bytesDone, encryptdata + bytesDone,
rsa_public, RSA_PKCS1_PADDING)) == -1)
{
printf("error\n");
}
if((decBytes=RSA_private_decrypt(encBytes, encryptdata + bytesDone, decryptdata + bytesDone,
rsa_private, RSA_PKCS1_PADDING)) == -1)
{
printf("error\n");
}
}
However, I want to save the encoded buffer encryptdata in a binary file, reading the binary file back and decryption. I try to do this as follows:
for (int i = 0; i < chunks; i++)
{
int bytesDone = i * maxlen;
int remainingLen = inLength - bytesDone;
int thisLen;
if (remainingLen > maxlen)
{
thisLen = maxlen;
} else
{
thisLen = remainingLen;
}
if((encBytes=RSA_public_encrypt(thisLen, data + bytesDone, encryptdata + bytesDone,
rsa_public, RSA_PKCS1_PADDING)) == -1)
{
printf("error\n");
}
}
writeFile("encoded.bin",encryptdata,strlen(encryptdata));
size_t size;
unsigned char *readData = readFile("encoded.bin", size);
int inputlen = size;
for (int i = 0; (i * keylen) < inputlen; i++) //keylen = 256
{
int bytesDone = i * keylen;
if((decBytes=RSA_private_decrypt(encBytes, readData + bytesDone, decryptdata + bytesDone,
rsa_private, RSA_PKCS1_PADDING)) == -1)
{
printf("error\n");
}
}
printf("Decrypted text: %s",decryptdata);
The readFile and writeFile functions are as follows:
void writeFile(char *filename, unsigned char *file, size_t fileLength
{
FILE *fd = fopen(filename, "wb");
if(fd == NULL) {
fprintf(stderr, "Failed to open file: %s\n", strerror(errno));
exit(1);
}
size_t bytesWritten = fwrite(file, 1, fileLength, fd);
if(bytesWritten != fileLength) {
fprintf(stderr, "Failed to write file\n");
exit(1);
}
fclose(fd);
}
unsigned char* readFile(char *filename, size_t size) {
FILE *fd = fopen(filename, "rb");
if(fd == NULL) {
fprintf(stderr, "Failed to open file: %s\n", strerror(errno));
exit(1);
}
// Determine size of the file
fseek(fd, 0, SEEK_END);
size_t fileLength = ftell(fd);
fseek(fd, 0, SEEK_SET);
size = fileLength;
// Allocate space for the file
unsigned char* buffer = (unsigned char*)malloc(fileLength);
// Read the file into the buffer
size_t bytesRead = fread(buffer, 1, fileLength, fd);
if(bytesRead != fileLength) {
fprintf(stderr, "Error reading file\n");
exit(1);
}
fclose(fd);
return buffer;
}
However, the decryption fails with the error message segmentation fault (core dump) and the decrypt function only returns -1 for every block. Any help will be appreciated.
ReadFile modifies the parameter "size" which is passed by value, thus when the readfile function returns, size is not affected.
I would change readfile proto as follows :
unsigned char* readFile(char *filename, size_t *size)
and then change the call into
unsigned char *readData = readFile("encoded.bin", &size);
and finally modify the readFile size update to
size = fileLength;
Your have various technical errors in your code like doing a strlen(..) on binary data in this statement:
writeFile("encoded.bin",encryptdata,strlen(encryptdata));
encryptdata is binary data that can include 0 that would be interprited as a string termination by strlen(..)
But the main problem is that you try to use RSA as a block cipher. Your encrypted blocks are bigger that what you encrypt, but you don't handle that in your code. You might be able to get your code to handle this, but the right approach is to use ciphers invented for bulk encryption, like AES. When you do that, you automatically get support for 'blocking' out of the box.
In addition to this you get something like a factor 1000 faster encryption.

In c socket, why my server can't receive the whole content?

I am new in this field, and writing one server and client, but it really confusing that I can't get all the content, but some small clip.
My server code:
read(connfd, name, 20);
//recv(connfd,name,1024,0);
char* a=name;
while(a[0]!='\n'){
a++;
}
a[0]='\0';
printf("name:%s\n", name);
read(connfd, size, 20);
printf("size:%s\n", size);
recv(connfd,buf,8192,0);
printf("buf:%s\n", buf);
if((stream = fopen(name,"w+t"))==NULL){
printf("The file was not opened! \n");
}
int write_length = fwrite(buf,sizeof(char),8192,stream);
bzero(buf,8192);
if(put){
char *res="OK\n";
write(connfd, res, 1024);
}
fclose(stream);
and my client code is:
char buffer[8192];
bzero(buffer,8192);
char * put="PUT\n";
if ((write(fd, put, 8192)) <= 0) {
if (errno != EINTR) {
fprintf(stderr, "Write error: %s\n", strerror(errno));
exit(0);
}
}
struct stat st ;
stat( put_name, &st );
char str[100];
sprintf(str, "%d", st.st_size);
int len;
char *current=NULL;
len=strlen(put_name);
char sendname[1024];
strcpy(sendname,put_name);
strcat(sendname,"\n");
write(fd, sendname, 10);
strcat(str,"\n");
write(fd, str, 10);
FILE *stream;
if((stream = fopen(put_name,"r"))==NULL)
{
printf("The file was not opened! \n");
exit(1);
}
int lengsize = 0;
while((lengsize = fread(buffer,1,8192,stream)) > 0){
if(send(fd,buffer,8192,0)<0){
printf("Send File is Failed\n");
break;
}
bzero(buffer, 8192);
}
Now, I can send all content, but can receive part of them. for example, on my mac, server can receive name but the str is neglected, when I printf the str in the server, it shows the content of file. and the content of file is not the whole file content. Some content disappear. Could you tell me why?
The read and write functions are not guaranteed to send or receive the entire message with a single call. Instead, you're expected to sit in a loop, writing the message incrementally until everything has been sent and reading everything incrementally until everything has been read. For example, if you know exactly how much has been sent, you can do this:
char recvBuffer[BUFFER_SIZE];
int bytesRead = 0;
while (bytesRead < BUFFER_SIZE) {
int readThisTime = read(file, recvBuffer + bytesRead, BUFFER_SIZE - bytesRead);
if (readThisTime == -1) {
// handle error...
}
bytesRead += readThisTime;
}
If you don't know exactly how much has been sent, try this:
char recvBuffer[BUFFER_SIZE];
int bytesRead = 0;
while (bytesRead < BUFFER_SIZE) {
int readThisTime = read(file, recvBuffer + bytesRead, BUFFER_SIZE - bytesRead);
if (readThisTime == -1) {
// handle error...
}
if (readThisTime == 0) break; // Done!
bytesRead += readThisTime;
}
You are ignoring the return values of send() and recv(). You MUST check return values!
When sending the file, lengsize receives how many bytes were actually read from the file. Your client is sending too many bytes when lengsize is < 8192 (typically the last block of the file if the file size is not an even multiple of 8192).
But more importantly, although the client is telling the server the file size, the server is ignoring it to know when to stop reading. The server is also ignoring the return value of recv() to know how many bytes were actually received so it knows how many bytes can safely be written to the output file.
Try something more like this instead:
common:
int readData(int s, void *buf, int buflen)
{
int total = 0;
char *pbuf = (char*) buf;
while (buflen > 0) {
int numread = recv(s, pbuf, buflen, 0);
if (numread <= 0) return numread;
pbuf += numread;
buflen -= numread;
total += numread;
}
return total;
}
int sendData(int s, void *buf, int buflen)
{
int total = 0;
char *pbuf = (char*) buf;
while (buflen > 0) {
int numsent = send(s, pbuf, buflen, 0);
if (numsent <= 0) return numsent;
pbuf += numsent;
buflen -= numsent;
total += numsent;
}
return total;
}
int readInt32(int s, int32_t *value)
{
int res = readData(s, value, sizeof(*value));
if (res > 0) *value = ntohl(*value);
return res;
}
int sendInt32(int s, int32_t value)
{
value = htonl(value);
return sendData(s, &value, sizeof(value));
}
char* readStr(int s)
{
int32_t size;
if (readInt32(s, &size) <= 0)
return NULL;
char *str = malloc(size+1);
if (!str)
return NULL;
if (readData(s, str, size) <= 0) {
free(str);
return NULL;
}
str[size] = '\0';
return str;
}
int sendStr(int s, const char *str)
{
int len = strlen(str);
int res = sendInt32(s, len);
if (res > 0)
res = sendData(s, str, len);
return res;
}
server:
char buffer[8192];
char *name = readStr(connfd);
if (!name) {
// error handling ...
sendStr(connfd, "Socket read error");
return;
}
printf("name:%s\n", name);
int32_t filesize;
if (readInt32(connfd, &filesize) <= 0) {
// error handling ...
free(name);
sendStr(connfd, "Socket read error");
return;
}
printf("size:%d\n", filesize);
if ((stream = fopen(name, "wb")) == NULL) {
// error handling ...
printf("The file was not opened!\n");
free(name);
sendStr(connfd, "File not opened");
return;
}
while (filesize > 0) {
int numread = readData(connfd, buf, min(filesize, sizeof(buffer)));
if (numread <= 0) {
// error handling ...
close(stream);
free(name);
sendStr(connfd, "Socket read error");
return;
}
printf("buf:%.*s\n", numread, buf);
if (fwrite(buf, 1, numread, stream) != numread) {
// error handling ...
close(stream);
free(name);
sendStr(connfd, "File write error");
return;
}
filesize -= numread;
}
fclose(stream);
free(name);
sendStr(connfd, "OK");
client:
char buffer[8192];
struct stat st;
if (stat( put_name, &st ) != 0) {
// error handling ...
exit(0);
}
if ((stream = fopen(put_name, "rb")) == NULL) {
// error handling ...
printf("The file was not opened!\n");
exit(0);
}
if (sendStr(fd, put_name) <= 0) {
// error handling ...
close(stream);
exit(0);
}
int32_t filesize = st.st_size;
if (sendInt32(fd, filesize) <= 0) {
// error handling ...
close(stream);
exit(0);
}
int lengsize;
while (filesize > 0) {
lengsize = fread(buffer, 1, min(filesize , sizeof(buffer)), stream);
if (lengsize <= 0) {
printf("Read File Failed\n");
// error handling ...
close(stream);
exit(0);
}
if (sendData(fd, buffer, lengsize) <= 0) {
printf("Send File Failed\n");
// error handling ...
close(stream);
exit(0);
}
filesize -= lengsize;
}
close(stream);
char *resp = readStr(fd);
if (!resp) {
// error handling ...
exit(0);
}
if (strcmp(resp, "OK") == 0)
printf("Send File OK\n");
else
printf("Send File Failed: %s\n", resp);
free(resp);

Resources