I have a file with path names to files:
/my/path1
/my/path11
/my/path12
/my/path13
The file structure is that it has individual paths in each line. All I want to do is search for the existence of a string /my/path1 or anyother in the above file many times
I could think of 2 methods.
every time get file contents line by line and then search the string. Advantage is that the file can be of anysize and I dont need to worry about buffer overflow.
Load the contents into a buffer and search it using the buffer. But as I dont have control over the file size I should be cautious here.
What is the best approach? I am working in unix. Is there any in-build library commands in C that I can make use of for this purpose? Or how can I accomplish the same task using awk in C code.
If you use stdio it will do the buffering for you. You can change its operation by using the function setvbuf to buffer more than a single line. getline can by used to check line by line.
I think loading all the file in memory is not a good idea. Using fgets and strcmp is the best way, I guess.
Related
I want to do the following:
open and read and ASCII file
locate a substring (geographical coordinates)
create its replacement (apply corrections to the original coordinates)
overwrite the original substring (write in the original file the corrected coordinates).
The format of the ASCII file is:
$GPGGA,091306.00,4548.17420,N,00905.47990,E,1,09,0.87,233.5,M,47.2,M,,*53
I will paste here only the part of the code that is responsible for this operation:
opnmea = fopen (argv[1], "r+");
if (fgets(row_nmea, ROW, opnmea)==NULL){
if (strstr(row_nmea,"$GPGGA")!=NULL) {
sscanf(row_nmea+17, "%10c", old_phi);
sscanf(row_nmea+30, "%11c", old_lam);
sscanf(row_nmea+54, "%5c", old_h);
fputs();
}
}
What I do till now is to extract in a variable the old coordinates and I was thinking to use fputs() for overwriting the old with new values. But I could not do it. The other part of the code that is not here is computing the correct coordinates. My idea is to correct the rows one by one, as the fgets() function reads each line.
I would appreciate very much any suggestion that can show me how to use fputs() or another function to complete my work. I am looking for something simple as I am beginner with C.
Thank you in advance.
Patching a text file in place is not a good solution for this problem, for multiple reasons:
the modified version might have a different length, hence patching cannot be done in place.
the read-write operation of standard streams is not so easy to handle correctly and defeats the buffering mechanism.
if you encounter an error during the patching phase, a partially modified file can be considered corrupted as one cannot tell which coordinates have been modified and which have not.
other programs might be reading from the same file as you are writing it. They will read invalid or inconsistent data.
I strongly recommend to write a program that reads the original file and writes a modified version to a different output file.
For this you need to:
open the original file for reading opnmea = fopen(argv[1], "r");
open the output file for writing: outfile = fopen(temporary_file_name, "w");
copy the lines that do not require modification: just call fputs(row_nmea, outfile).
parse relevant data in lines that require modification with whatever method you are comfortable with: sscanf, strtok, ...
compute the modified fields and write the modified line to outfile with fprintf.
Once the file has been completely and correctly handled, you can replace the original file with rename. The rename operation is usually atomic at the file-system level, so other programs will either finish reading from the previous version or open the new version.
Of course, if the file has only one line, you could simply rewind the stream and write back the line with fprintf, but this is a special case and it will fail if the new version is shorter than the original. Truncating the extra data is not easy. An alternative is to reopen the file in write mode ("w") before writing the modified line.
I would recommend strtok(), followed by your revision, followed by strcat().
strtok() will let you separate the line using the comma as a delimiter, so you will get the field you want reliably. You can break up the line into separate strings, revise the coordinates you wish, and reassemble the line, including the commas, with strcat().
These pages include nice usage examples, too:
http://www.cplusplus.com/reference/cstring/strtok/
http://www.cplusplus.com/reference/cstring/strcat/?kw=strcat
I am using a C program which takes file contents as input. I am using input redirection at the command line to read the file. Can I use getchar() to obtain the content of the file? Or should I be reading it into a certain array and then access it?
Yes sure you can use any method to read input from file while running program through command.
You do not need to format it at all. the data in file should appear as if typed on command line while providing inputs. May be this helps.
Please provide more insight if this does not help.Thanks
I am working with a text file, which contains a list of processes under my programs control, along with relevant data.
At some point, one of the processes will finish, and thus will need to be removed from the file (as its no longer under control).
Here is a sample of the file contents (which has enteries added "randomly"):
PID=25729 IDLE=0.200000 BUSY=0.300000 USER=-10.000000
PID=26416 IDLE=0.100000 BUSY=0.800000 USER=-20.000000
PID=26522 IDLE=0.400000 BUSY=0.700000 USER=-30.000000
So for example, if I wanted to remove the line that says PID=26416.... how could I do that, without writing the file over again?
I can use external unix commands, however I am not very familiar with them so please if that is your suggestion, give an example.
Thanks!
Either you keep the contents of the file in temporary memory and then rewrite the file. Or you could have a file for each of the PIDs with the relevant information in them. Then you simply delete the file when it's no longer running. Or you could use a database for this instead.
As others have already pointed out, your only real choice is to rewrite the file.
The obvious way to do that with "external UNIX commands" would be grep -v "PID=26416" (or whatever PID you want to remove, obviously).
Edit: It is probably worth mentioning that if the lines are all the same length (as you've shown here) and order doesn't matter, you could delete a line more efficiently by copying the last line into the space being vacated, then shorten the file so eliminate what had been the last line. This will only work if they really are all the same length though (e.g., if you got a PID of '1', you'd need to pad it to the same length as the others in the file).
The only way is by copying each character that comes after the deleted line down over the characters that are deleted.
It is far more efficient to simply rewrite the file.
how could I do that, without writing the file over again?
You cannot. Filesystems (perhaps besides more esoteric record based ones) does not support insertion or deletion.
So you'll have to write the lines to a temporary file up till the line you want to delete, skip over that line, and write the rest of the lines to the file. When done, rename/copy the temp file to the original filename
Why are you maintaining these in a text file? That's not the best model for such a task. But, if you're stuck with it ... if these lines are guaranteed to all be the same length (it appears that way from the sample), and if the order of the lines in the file doesn't matter, then you can write the last line over the line for the process that has died and then shorten the file by one line with the (f)truncate() call if you're on a POSIX system: see Jonathan Leffler's answer in How to truncate a file in C?
But note carefully netrom's answer, which gives three different better ways to maintain this info.
Also, if you stick with a text file (preferably written from scratch each time from data structures you maintain, as per netrom's first suggestion), and you want to be sure that the file is always well formed, then write the new data into a temp file on the same device (putting it in the same directory is easiest) and then do a rename() call, which is an atomic operation.
You can use sed:
sed -i.bak -e '/PID=26416/d' test
-i is for editing in place. It also creates a back-up file with the new extension .bak
-e is for specifying the pattern. The /d indicates all lines matching the pattern should be deleted.
test is the filename
The unix command for it is:
grep -v "PID=26416" myfile > myfile.tmp
mv myfile.tmp myfile
The grep -v part outputs the file without the rows with the search term.
The > myfile.tmp part creates a new temp file for this output.
The mv part renames the temp file to the original file.
Note that we are rewriting the file here, and moreover, we can lose data if someone write something to file between the two commands.
hello i got a problem with reading from a file, i am trying to read from a file using fscanf() and i cant seem to sort it out.
i try to read the file line by line and putting the string in a variable (buffer) each time but i cant understand how the while loop is suppose to be looking like
thanks in advance
the file that i want to read from is a txt file with this format: first line :"1234,abc,etc" second line : "2432,fjh,etc" and more lines like those i want to be able to use the fscanf method inorder to put in each loop the all line lets say "1234,abc,etc" in my string variable and so on till i dont have any more lines to read from
this is what i managed to gather so far (ofc its not the currect way to write it):
char* buffer[100];
while (fscanf(FILE *finput,"%s",buffer)!=something)
{
printf("%s",buffer);
}
i want this code to be able to print all of the lines in my code if you would be able to correct my errors i will greatly appriciate it
I feel like you should read some of these great topics first:
Trouble reading a line using fscanf()
Reading file using fscanf() in C
fscanf multiple lines [c++]
There are plenty of reasons why you should use fgets or something else instead.
Quoting from this place:
fscanf() is a field oriented function and is inappropriate for use in a robust, general-purpose text file reader. It has two major drawbacks:
You must know the exact data layout of the input file in advance and rewrite the function call for every different layout.
It's difficult to read text strings that contain spaces because fscanf() sees space characters as field delimiters.
If you know the size of file you're trying to read, you could use fread(), which is block oriented.
just had a general question about how to approach a certain problem I'm facing. I'm fairly new to C so bear with me here. Say I have a folder with 1000+ text files, the files are not named in any kind of numbered order, but they are alphabetical. For my problem I have files of stock data, each file is named after the company's respective ticker. I want to write a program that will open each file, read the data find the historical low and compare it to the current price and calculate the percent change, and then print it. Searching and calculating are not a problem, the problem is getting the program to go through and open each file. The only way I can see to attack this is to create a text file containing all of the ticker symbols, having the program read that into an array and then run a loop that first opens the first filename in the array, perform the calculations, print the output, close the file, then loop back around moving to the second element (the next ticker symbol) in the array. This would be fairly simple to set up (I think) but I'd really like to avoid typing out over a thousand file names into a text file. Is there a better way to approach this? Not really asking for code ( unless there is some amazing function in c that will do this for me ;) ), just some advice from more experienced C programmers.
Thanks :)
Edit: This is on Linux, sorry I forgot to metion that!
Under Linux/Unix (BSD, OS X, POSIX, etc.) you can use opendir / readdir to go through the directory structure. No need to generate static files that need to be updated, when the file system has the information you want. If you only want a sub-set of stocks at a given time, then using glob would be quicker, there is also scandir.
I don't know what Win32 (Windows / Platform SDK) functions are called, if you are developing using Visual C++ as your C compiler. Searching MSDN Library should help you.
Assuming you're running on linux...
ls /path/to/text/files > names.txt
is exactly what you want.
opendir(); on linux.
http://linux.die.net/man/3/opendir
Exemple :
http://snippets.dzone.com/posts/show/5734
In pseudo code it would look like this, I cannot define the code as I'm not 100% sure if this is the correct approach...
for each directory entry
scan the filename
extract the ticker name from the filename
open the file
read the data
create a record consisting of the filename, data.....
close the file
add the record to a list/array...
> sort the list/array into alphabetical order based on
the ticker name in the filename...
You could vary it slightly if you wish, scan the filenames in the directory entries and sort them first by building a record with the filenames first, then go back to the start of the list/array and open each one individually reading the data and putting it into the record then....
Hope this helps,
best regards,
Tom.
There are no functions in standard C that have any notion of a "directory". You will need to use some kind of platform-specific function to do this. For some examples, take a look at this post from Cprogrammnig.com.
Personally, I prefer using the opendir()/readdir() approach as shown in the second example. It works natively under Linux and also on Windows if you are using Cygwin.
Approach 1) I would just have a specific directory in which I have ONLY these files containing the ticker data and nothing else. I would then use the C readdir API to list all files in the directory and iterate over each one performing the data processing that you require. Which ticker the file applies to is determined only by the filename.
Pros: Easy to code
Cons: It really depends where the files are stored and where they come from.
Approach 2) Change the file format so the ticker files start with a magic code identifying that this is a ticker file, and a string containing the name. As before use readdir to iterate through all files in the folder and open each file, ensure that the magic number is set and read the ticker name from the file, and process the data as before
Pros: More flexible than before. Filename needn't reflect name of ticker
Cons: Harder to code, file format may be fixed.
but I'd really like to avoid typing out over a thousand file names into a text file. Is there a better way to approach this?
I have solved the exact same problem a while back, albeit for personal uses :)
What I did was to use the OS shell commands to generate a list of those files and redirected the output to a text file and had my program run through them.
On UNIX, there's the handy glob function:
glob_t results;
memset(&results, 0, sizeof(results));
glob("*.txt", 0, NULL, &results);
for (i = 0; i < results.gl_pathc; i++)
printf("%s\n", results.gl_pathv[i]);
globfree(&results);
On Linux or a related system, you could use the fts library. It's designed for traversing file hierarchies: man fts,
or even something as simple as readdir
If on Windows, you can use their Directory Management API's. More specifically, the FindFirstFile function, used with wildcards, in conjunction with FindNextFile