I get the following error after reinstalling my site on localhost.
Fatal error: require_once() [function.require]: Failed opening required '/Applications/XAMPP/xamppfiles/htdocs/sites/all/modules/custom/redirect/redirect.install'
The .install file DOES exist, and is below:
1 <?php
2 /**
3 * #file
4 *
5 */
6
7 /**
8 * Implementation of hook_install().
9 */
10 function redirect_install() {
11
12 }
13
14 /**
15 * Implementation of hook_uninstall().
16 */
17 function redirect_uninstall() {
18 variable_del('desktop_site_home');
19 variable_del('mobile_site_home');
20 }
The module has no require or include statements at all.
Does anyone have any idea whatsoever what might be going wrong here?
Thanks in advance..
You have a permissions and/or a file ownership problem.
Fix them quickly. This is my technique:
cd to the module's dir and:
chmod 775 *.install
Optionally, ls -la and see if there is a dominant owner of the files inside the Drupal docroot. Say you have some files owned by www-data in the group www-data.
If so, that's probably the user that your web server is running as. So...
chown www-data:www-data [filename]
hope that helps
joe
Related
Downloaded from here
Untarred, mkdir build, mkdir PC, executed...
../../gdb/configure --target=arm-linux-gnueabihf
returned...
../../gdb/gdbsupport/common-defs.h:33:10: fatal error: ../../gnulib/config.h: No such file or directory
#include "../../gnulib/config.h"
There was a 'gnulib' package I could install, installed it and it made no difference
Edited ../../gdb/gdbsupport/common-defs.h and found one header include based on gdbserver/gdb.
#ifdef GDBSERVER
#include "build-gnulib-gdbserver/config.h"
#else
#include "../../gnulib/config.h"
#endif
Go back two levels and there is a gnulib directory but no config.h, ll shows
-rw-rw-r-- 1 user user 51507 May 23 15:10 aclocal.m4
-rw-rw-r-- 1 user user 2417 May 23 15:10 ChangeLog
-rw-rw-r-- 1 user user 69989 May 23 15:10 config.in
-rw-rw-r-- 1 user user 743485 May 23 15:10 configure
-rw-rw-r-- 1 user user 1625 Feb 8 05:49 configure.ac
drwxrwxr-x 5 user user 4096 Jun 2 14:53 import/
-rw-rw-r-- 1 user user 739 May 23 15:10 Makefile.am
-rw-rw-r-- 1 user user 58332 May 23 15:10 Makefile.in
drwxrwxr-x 2 user user 4096 Jun 2 14:53 patches/
-rw-rw-r-- 1 user user 249 Sep 20 2019 README
-rwxrwxr-x 1 user user 5641 May 23 15:10 update-gnulib.sh
So in the process of writing out the end of my question I put two and two together and am just answering so no one else has to go through this.
As you'll notice configure in gnulib is not executable, so first I ran 'chmod +x configure' Before running it I figured I would go back into my build/PC directory to run configure from there to see if that would recursively configure gnulib, but that did not seem to be the case. You will need to execute ./configure inside of the gnulib directory to generate the config.h. I think regardless of you cross compiling or not you want gnulib to NOT have an explicit target, looks like it'll be used solely for the purpose of building GDB.
After running ./configure you'll now notice you have a config.h, yeahhhhhhh! Now go back to your build/PC directory and run make. Guess what? It will now complain about having already configured the gnulib directory and you need to clean up for make to work. "But Joe!", you say, "Won't that remove the config.h we so desperately needed?" "Yes! Yes it will!" So you need to move your config.h elsewhere, execute 'make distclean' inside of the gnulib directory, go back to your build directory, just wipe it out completely because you'll have issues due to the mixed configurations, re-configure yet again, DON'T FORGET TO COPY CONFIG.H BACK INTO GNULIB/, then run make.
All in a days work.
I try to get the name of the folder / file pointed by the symbolic link.
For example, when you do ls -l
You can get this result
-rw-r--r-- 1 macos staff 0 Feb 22 12:05 test
lrwxr-xr-x 1 macos staff 7 Feb 19 11:05 sl -> test
How could I do, if I know the path of sl to get the file/folder here it pointed to ?
I want to do it using stat if possible.
Any suggestion ?
So to summarize :
It's impossible to get the name of the file/folder pointed by a symbolic link, using lstat or stat.
The function readlink can do the job => Man : http://man7.org/linux/man-pages/man2/readlink.2.html. You will get example in the man
Thank you for helping me solve my problem
Nagiosql generated files make problems during preflight check - but everythings seems to be okay.
/etc/nagios/nagios.cfg
....
## Hosts
cfg_dir=/etc/nagiosql/hosts/
cfg_file=/etc/nagiosql/hosttemplates.cfg
cfg_file=/etc/nagiosql/hostgroups.cfg
cfg_file=/etc/nagiosql/hostextinfo.cfg
cfg_file=/etc/nagiosql/hostescalations.cfg
cfg_file=/etc/nagiosql/hostdependencies.cfg
## Services
cfg_dir=/etc/nagiosql/services/
cfg_file=/etc/nagiosql/servicetemplates.cfg
cfg_file=/etc/nagiosql/servicegroups.cfg
cfg_file=/etc/nagiosql/serviceextinfo.cfg
cfg_file=/etc/nagiosql/serviceescalations.cfg
cfg_file=/etc/nagiosql/servicedependencies.cfg
...
nagios -v /etc/nagios/nagios.cfg
....
Running pre-flight check on configuration data...
Checking services...
Error: There are no services defined!
Checked 0 services.
Checking hosts...
Error: There are no hosts defined!
Checked 0 hosts.
The content seems okay to me
[root#xxx services]# cd /etc/nagiosql/services/
[root#xxx services]# ls -alh
total 20K
drwsr-sr-x 2 apache nagios 4.0K Aug 7 10:46 .
drwsr-sr-x 5 apache nagios 4.0K Aug 7 12:17 ..
-rw-r--r-- 1 apache nagios 2.3K Aug 7 10:46 localhost.cfg
-rw-r--r-- 1 apache nagios 2.2K Aug 7 10:46 www.google.com.cfg
-rw-r--r-- 1 apache nagios 1.1K Aug 7 10:46 www.yahoo.com.cfg
[root#xxx hosts]# ls -alh
total 16K
drwsr-sr-x 2 apache nagios 4.0K Aug 11 07:12 .
drwsr-sr-x 5 apache nagios 4.0K Aug 7 12:17 ..
-rw-r--r-- 1 apache nagios 800 Aug 11 07:12 GIT.cfg
-rw-r--r-- 1 apache nagios 948 Aug 11 07:12 psm01.cfg
Content also seems to be fine (generated by nagiosql):
[root#xxx hosts]# vi GIT.cfg
###############################################################################
#
# Host configuration file
#
# Created by: Nagios QL Version 3.2.0
# Date: 2015-08-11 07:12:54
# Version: Nagios 3.x config file
#
# --- DO NOT EDIT THIS FILE BY HAND ---
# Nagios QL will overwite all manual settings during the next update
#
###############################################################################
define host {
host_name GIT
alias GIT Server
address 172.25.10.80
register 0
}
###############################################################################
#
# Host configuration file
#
# END OF FILE
#
###############################################################################
~
Can somebody tell me where the solution for this problem is? Already wasted 2 hours...
Try removing the final slash from the directory names in your cfg_dir definitions and see if that doesn´t get it to recognize the cfg files in that directory.
For example,
Change:
cfg_dir=/etc/nagiosql/hosts/
...
cfg_dir=/etc/nagiosql/services/
To:
cfg_dir=/etc/nagiosql/hosts
...
cfg_dir=/etc/nagiosql/services
EDIT:
Okay I think directory permissions may be causing the cfg_dir evaulations to fail. According to the ls -alh output you listed, your /etc/nagiosql/hosts/, /etc/nagiosql/services/, and /etc/nagiosql/ directories do not grant write permissions to the nagios group. Nagios will need to get a directory listing for those directories and will need group write permissions to do it.
To remedy:
chmod g+w /etc/nagiosql/hosts/
chmod g+w /etc/nagiosql/services/
Restart nagios service.
Also, you don't need to remove the slashes from the directory paths in the nagios cfg_dir configurations. Nagios will strip the trailing slash (/) for you, according to the code:
https://github.com/NagiosEnterprises/nagioscore/blob/eb8e83d5d05e572eb8c0d4d4764885c5427b4b69/xdata/xodtemplate.c#L327
/* process all files in a config directory */ else if(!strcmp(var, "xodtemplate_config_dir") || !strcmp(var, "cfg_dir")) {
if(config_base_dir != NULL && val[0] != '/') {
asprintf(&cfgfile, "%s/%s", config_base_dir, val);
} else
cfgfile = strdup(val);
/* strip trailing / if necessary */ if(cfgfile != NULL && cfgfile[strlen(cfgfile) - 1] == '/')
cfgfile[strlen(cfgfile) - 1] = '\x0';
/* process the config directory... */ result = xodtemplate_process_config_dir(cfgfile, options);
my_free(cfgfile);
/* if there was an error processing the config file, break out of loop */ if(result == ERROR)
break; } }
EDIT #2: In the host definition you posted, your register value is set to 0. Try setting it to 1 instead. register 0 is used for templates that will be inherited from, but will not actually show up in the Nagios UI.
Change:
define host {
host_name GIT
alias GIT Server
address 172.25.10.80
register 0
}
To:
define host {
host_name GIT
alias GIT Server
address 172.25.10.80
register 1
}
Also please set register 1 for your service definitions as well.
Try adding executable permissions to your directories. Some programs and languages require +x permissions in order to actually open the directory.
If that doesn't work, temporarily set everything to 0777 permissions to see if the issue is permissions related at all.
You also have config problems even if you get that part working. Your host and service configs don't have a use directive in them, which points to a template that would have most of the default values. The register directive is implied as 1 unless you specifically set it to 0 for a template. See the object definitions docs if you need a reference: https://assets.nagios.com/downloads/nagioscore/docs/nagioscore/3/en/objectdefinitions.html
Hi i want to install MinorFS 0.3.5 to my computer. My Ubuntu version is 14.04 LTS. But i had some problems while installing the program.
Firstly i installed all fuse modules and gcc and run the script install.pl.
The program is designed for Ubuntu 8. As a result it wants to install fuse module to start the script install.pl.
But there is not a loadable fuse module for Ubuntu 14.04 LTS. I research about it and i see that, for the latest version of Ubuntu, the kernel is configured to include FUSE instead of compiling it as a module. So, i modified the perl code in install.pl and
install the script.(I install fuseiso with command apt-get install fuseiso just in case.)
Everyting is great for the moment. But for the next step, i run the command on terminal "/etc/init.d/minorfs start ".
And i get this error : " The path specified in /var/minorfs/viewfs.startcap is not a valid base dir for minorviewfs
"
This command runs the minorcapfs and minorviewfs i guess.Minorcapfs run succesfully but for minorviewfs i got this error.
The code which gives the Error writen below:(in minorviewfs file)
unless (-d $basepath) {
print STDERR "The path specified in $VARDIR/viewfs.startcap is not a valid base dir for minorviewfs\n";
exit 1;
}
Then for test, i print my " $basepath " and it's : /mnt/minorfs/cap/61ce0488ac06eba530e178a0d1716ec576b47f71
I couldn't solve this error.
Please help me to get rid of this problem.
Thank you!
I solved the problem with manually making a directory with the mkdir command. Now the script work. But now I have a different problem. The output is ;
Starting MinorFs filesystems minorcapfs going into background, consult syslog for information minorviewfs going into background, consult syslog for information.
Then when i run the command ls -la /mnt/minorfs/priv
i should get a links to the folders. But I have nothing.
dr-xr-xr-x 1 root root 0 Jan 1 1970 .
lrwxrwxrwx 1 root root 0 Jan 1 1970 home ->
lrwxrwxrwx 1 root root 0 Jan 1 1970 tmp ->
So i looked the system log file with gedit /var/log/syslog and i see that Error;
Sep 1 13:51:37 burak-UX31A minorcapfs[3581]: Problem in Fuse::main at /usr/local/bin/minorcapfs line 340
Sep 1 13:51:37 burak-UX31A minorcapfs[3581]: user: 0 1001 ; group 104 104 104 104 at /usr/local/bin/minorcapfs line 341
Sep 1 13:51:37 burak-UX31A minorcapfs[3581]: Probably a problem accesing /dev/fuse at /usr/local/bin/minorcapfs line 342
Sep 1 13:52:01 burak-UX31A minorviewfs[3584]: Use of uninitialized value in subroutine entry at /usr/lib/perl5/Fuse.pm line 147, line 26.
And this the MinorCapfs code ; http://codepad.org/nUUJ3b5m
How to get rid of this problems? Thank you.
FastCgiIpcDir problems in error log
Hi,
I have noticed in my Apache error logs the following error (error 1):
[Wed Feb 08 14:00:06 2012] [alert] [client 41.185.88.175] (2)No such file or directory: FastCGI: failed to connect to (dynamic) server "/var/www/bin/php-splashpage-user/php-fastcgi": something is seriously wrong, any chance the socket/named_pipe directory was removed?, see the FastCgiIpcDir directive
Directly afterwards followed by this error (error 2):
[Wed Feb 08 14:00:06 2012] [error] [client 41.185.88.175] FastCGI: incomplete headers (0 bytes) received from server "/var/www/bin/php-splashpage-user/php-fastcgi"
How do I fix error 1?
I read about changing this due to the host system cleaning out the "/tmp" directory ( the default dir for fastCgiIpcDir if not defined ) periodically and thus obliterating communication with current active FastCGI services. So I decided to give it a go. I set the FastCgiIpcDir in fastcgi.conf file in hopes of success, but there is simply no change.
This is the contents of my fastcgi.conf file:
<IfModule mod_fastcgi.c>
FastCgiIpcDir /var/lib/apache2/fastcgi_test
FastCgiConfig -idle-timeout 60 -maxClassProcesses 1
FastCgiWrapper On
AddHandler php5-fcgi .php
Action php5-fcgi /cgi-bin/php-fastcgi
<Location "/cgi-bin/php-fastcgi">
Order Deny,Allow
Deny from All
Allow from env=REDIRECT_STATUS
Options ExecCGI
SetHandler fastcgi-script
</Location>
</IfModule>
Permissions and onwerships of /var/lib/apache2/fastcgi_test:
drwxr-xr-x 3 www-data www-data 4.0K 2012-02-08 09:20 fastcgi_test
My php wrapper script php_fastcgi has the following lines:
#!/bin/sh
PHP_FCGI_CHILDREN=120
export PHP_FCGI_CHILDREN
PHP_FCGI_MAX_REQUESTS=1000
export PHP_FCGI_MAX_REQUESTS
umask 0022
exec /usr/bin/php-cgi -d apc.shm_size=50
I am running PHP 5.3.1, Apache/2.2.14, Ubuntu 10.04.
Here's few things I've picked up so far:
Error 1 only appears at the beginning of an hour say 6 seconds just after the new hour
From working with mod_FastCgi I have learnt that increasing the child processes help relieve some of the "error 2" errors ( which cause the HTTP 500 error at random intervals). Currently I am not quite sure what the affect of error 1 would be, however if error 2 follows directly after then it's safe to say it's not a good thing.
There is very little, if any, full information on errors reported by Fastcgi with tried and tested solutions. Sadly I may just be adding onto the piles of Fastcgi errors posted on the web with no conclusion.
Your help, advice or tips in resolving error 1 would be readily appreciated.
I don't know how to make it work with a wrapper, and suexec, but you should try this:
http://blog.kmp.or.at/2013/06/apache-2-2-on-debian-wheezy-w-php-fpm-fastcgi-apc-and-a-kind-of-suexec/
The solution in the link does not even use suexec, nor the wrapper, and that way at least it works.
The steps required for that:
0) install php5-fpm, and apache-mpm-worker if not already installed
1) comment this line :
#FastCgiWrapper On
2) make an alias:
Alias /cgi-bin/php-fastcgi **/var/something**
3) fastcgiexternalserver:
FastCgiExternalServer **/var/something** -socket php5-fpm-site1user.sock
(The strongly typed paths must be the same)
4) set up the conf in php5-fpm/pool.d/site1user.conf
[site1user]
user = site1user
group = site1user
listen = /var/run/php5-fpm-site1user.sock
pm = dynamic
pm.max_children = 5
pm.start_servers = 2
pm.min_spare_servers = 1
pm.max_spare_servers = 3
chdir = /
5) restart fpm
service php5-fpm restart
6) for deeper understanding check my other answer here
https://serverfault.com/questions/524708/php5-fpm-apache2-on-wheezy-connect-failed-with-fastcgi/536277#536277