I'm using an MDX query to pull information to support a set of reports. A high degree of detail is required for the reports so they take some time to generate. To speed up the access time we pull the data we need and store it in a flat Oracle table and then connect to the table in Excel. This makes the reports refresh in seconds instead of minutes.
Previously the MDX was generated and run by department for 100 departments and then for a number of other filters. All this was done in VB.Net. The requirements for filters have grown to the point where this method is not sustainable (and probably isn't the best approach regardless).
I've built the entire dataset into one MDX query that works perfectly. One of my sets that I cross join includes members from three different levels of hierarchy, it looks like this:
(
Descendants([Merch].[Merch CHQ].[All], 2),
Descendants([Merch].[Merch CHQ].[All], 3),
[Merch].[Merch CHQ].[Department].&[1].Children
)
The problem for me is in our hierarchy (which I can't change), each group (first item) and each department (second item) have the same structure to their naming, ie 15-DeptName and it's confusing to work with.
To address it I added a member:
MEMBER
[Measures].[Merch Level] AS
(
[Merch].[Merch CHQ].CurrentMember.Level.Name
)
Which returns what type the member is and it works perfectly.
The problem is that it updates for every member so none of the rows get filtered by NON BLANK, instead of 65k rows I have 130k rows which will hurt my access performance.
Can my query be altered to still filter out the non blanks short of using IIF to check each measurement for null?
You can specify Null for your member based on your main measure like:
MEMBER
[Measures].[Merch Level] AS
IIf(IsEmpty([Measures].[Normal Measure]),null,[Merch].[Merch CHQ].CurrentMember.Level.Name)
That way it will only generate when there is data. You can go further and add additional dimensions to the empty check if you need to get more precise.
Related
I could need some help with a Anylogic Model.
Model (short): Manufacturing scenario with orders move in a individual route. The workplaces (WP) are dynamical created by simulation start. Their names, quantity and other parameters are stored in a database (excel Import). Also the orders are created according to an import. The Agent population "order" has a collection routing which contains the Workplaces it has to stop in the specific order.
Target: I want a moveTo block in main which finds the next destination of the agent order.
Problem and solution paths:
I set the destination Type to agent and in the Agent field I typed a function agent.getDestination(). This function is in order which returns the next entry of the collection WP destinationName = routing.get(i). With this I get a Datatype error (while run not compiling). I quess it's because the database does not save the entrys as WP Type but only String.
Is there a possiblity to create a collection with agents from an Excel?
After this I tried to use the same getDestination as String an so find via findFirst the WP matching the returned name and return it as WP. WP targetWP = findFirst(wps, w->w.name == destinationName);
Of corse wps (the population of Workplaces) couldn't be found.
How can I search the population?
Maybe with an Agentlink?
I think it is not that difficult but can't find an answer or a solution. As you can tell I'm a beginner... Hope the description is good an someone can help me or give me a hint :)
Thanks
Is there a possiblity to create a collection with agents from an Excel?
Not directly using the collection's properties and, as you've seen, you can't have database (DB) column types which are agent types.1
But this is relatively simple to do directly via Java code (and you can use the Insert Database Query wizard to construct the skeleton code for you).
After this I tried to use the same getDestination as String an so find via findFirst the WP matching the returned name and return it as WP
Yes, this is one approach. If your order details are in Excel/the database, they are presumably referring to workplaces via some String ID (which will be a parameter of the workplace agents you've created from a separate Excel worksheet/database table). You need to use the Java equals method to compare strings though, not == (which is for comparing numbers or whether two objects are the same object).
I want a moveTo block in main which finds the next destination of the agent order
So the general overall solution is
Create a population of Workplace agents (let's say called workplaces in Main) from the DB, each with a String parameter id or similar mapped from a DB column.
Create a population of Order agents (let's say called orders in Main) from the DB and then, in their on-startup action, set up their collection of workplace IDs (type ArrayList, element class String; let's say called workplaceIDsList) using data from another DB table.
Order probably also needs a working variable storing the next index in the list that it needs to go to (so let's say an int variable nextWorkplaceIndex which starts at 0).
Write a function in Main called getWorkplaceByID that has a single String argument id and returns a Workplace. This gets the workplace from the population that matches the ID; a one-line way similar to yours is findFirst(workplaces, w -> w.id.equals(id)).
The MoveTo block (which I presume is in Main) needs to move the Order to an agent defined by getWorkplaceByID(agent.workplaceIDsList.get(nextWorkplaceIndex++)). (The ++ bit increments the index after evaluating the expression so it is ready for the next workplace to go to.)
For populating the collection, you'd have two tables, something like the below (assuming using strings as IDs for workplaces and orders):
orders table: columns for parameters of your orders (including some String id column) other than the workplace-list. (Create one Order agent per row.)
order_workplaces table: columns order_id, sequence_num and workplace_id (so with multiple rows specifying the sequence of workplace IDs for an order ID).
In the On startup action of Order, set up the skeleton query code via the Insert Database Query wizard as below (where we want to loop through all rows for this order's ID and do something --- we'll change the skeleton code to add entries to the collection instead of just printing stuff via traceln like the skeleton code does).
Then we edit the skeleton code to look like the below. (Note we add an orderBy clause to the initial query so we ensure we get the rows in ascending sequence number order.)
List<Tuple> rows = selectFrom(order_workplaces)
.where(order_workplaces.order_id.eq(id))
.orderBy(order_workplaces.sequence_num.asc())
.list();
for (Tuple row : rows) {
workplaceIDsList.add(row.get(order_workplaces.workplace_id));
}
1 The AnyLogic database is a normal relational database --- HSQLDB in fact --- and databases only understand their own specific data types like VARCHAR, with AnyLogic and the libraries it uses translating these to Java types like String. In the user interface, AnyLogic makes it look like you set the column types as int, String, etc. but these are really the Java types that the columns' contents will ultimately be translated into.
AnyLogic does support columns which have option list types (and the special Code type column for columns containing executable Java code) but these are special cases using special logic under the covers to translate the column data (which is ultimately still a string of characters) into the appropriate option list instance or (for Code columns) into compiled-on-the-fly-and-then-executed Java).
Welcome to Stack Overflow :) To create a Population via Excel Import you have to create a method and call Code like this. You also need an empty Population.
int n = excelFile.getLastRowNum(YOUR_SHEET_NAME);
for(int i = FIRST_ROW; i <= n; i++){
String name = excelFile.getCellStringValue(YOUR_SHEET_NAME, i, 1);
double SEC_PARAMETER_TO_READ= excelFile.getCellNumericValue(YOUR_SHEET_NAME, i, 2);
WP workplace = add_wps(name, SEC_PARAMETER_TO_READ);
}
Now if you want to get a workplace by name, you have to create a method similar to your try.
Functionbody:
WP workplaceToFind = wps.findFirst(w -> w.name.equals(destinationName));
if(workplaceToFind != null){
//do what ever you want
}
My department uses a software tool that can use a custom component library sourced from Tables or Queries in an MS Access database.
Table: Components
ID: AutoNumber
Type: String
Mfg: String
P/N: String
...
Query: Resistors
SELECT Components.*
FROM Components
WHERE Components.Type = "Resistors"
Query: Capacitors
SELECT Components.*
FROM Components
WHERE Components.Type = "Capacitors"
These queries work fine for SELECT. But when users add a row to the query, how can I ensure the correct value is saved to the Type field?
Edit #2:
Nope, can't be done. Sorry.
Edit #1:
As was pointed out, I may have misunderstood the question. It's not a wonky question after all, but perhaps an easy one?
If you're asking how to add records to your table while making sure that, for example, "the record shows up in a Resistors query if it's a Resistor", then it's a regular append query, that specifies Resisitors as your Type.
For example:
INSERT INTO Components ( ID, Type, Mfg )
SELECT 123, 'Resistors', 'Company XYZ'
If you've already tried that and are having problems, it could be because you are using a Reserved Word as a field name which, although it may work sometimes, can cause problems in unexpected ways.
Type is a word that Access, SQL and VBA all use for a specific purpose. It's the same idea as if you used SELECT and FROM as field or table names. (SELECT SELECT FROM FROM).
Here is a list of reserved words that should generally be avoided. (I realize it's labelled Access 2007 but the list is very similar, and it's surprisingly difficult to find an recent 'official' list for Excel VBA.)
Original Answer:
That's kind a a wonky way to do things. The point of databases is to organize in such a way as to prevent duplication of not only data, but queries and codes as well
I made up the programming rule for my own use "If you're doing anything more than once, you're doing it wrong." (That's not true in all cases but a general rule of thumb nonetheless.)
Are the only options "Resistors" and "Capacitors"? (...I hope you're not tracking the inventory of an electronics supply store...) If there are may options, that's even more reason to find an alternative method.
To answer your question, in the Query Design window, it is not possible to return the name of the open query.
Some alternative options:
As #Erik suggested, constrain to a control on a form. Perhaps have a drop-down or option buttons which the user can select the relevant type. Then your query would look like:
SELECT * FROM Components WHERE Type = 'Forms![YourFormName]![NameOfYourControl]'
In VBA, have the query refer to the value of a variable, foe example:
Dim TypeToDel as String
TypeToDel = "Resistor"
DoCmd.RunSQL "SELECT * FROM Components WHERE Type = '" & typeToDel'"
Not recommended, but you could have the user manually enter the criteria. If your query is like this:
SELECT * FROM Components WHERE Type = '[Enter the component type]'
...then each time the query is run, it will prompt:
Similarly, you could have the query prompt for an option, perhaps a single-digit or a code, and have the query choose the the appropriate criteria:
...and have an IF statement in the query criteria.
SELECT *
FROM Components
WHERE Type = IIf([Enter 1 for Resistors, 2 for Capacitors, 3 for sharks with frickin' laser beams attached to their heads]=1,'Resistors',IIf([Enter 1 for Resistors, 2 for Capacitors, 3 for sharks with frickin' laser beams attached to their heads]=2,'Capacitors','LaserSharks'));
Note that if you're going to have more than 2 options, you'll need to have the parameter box more than once, and they must be spelled identically.
Lastly, if you're still going to take the route of a separate query for each component type, as long as you're making separate queries anyway, why not just put a static value in each one (just like your example):
SELECT * FROM Components WHERE Type = 'Resistor'
There's another wonky answer here but that's just creating even more duplicate information (and more future mistakes).
Side note: Type is a reserved word in Access & VBA; you might be best to choose another. (I usually prefix with a related letter like cType.)
More Information:
Use parameters in queries, forms, and reports
Use parameters to ask for input when running a query
Microsoft Access Tips & Tricks: Parameter Queries
• Frickin' Lasers
I'm usually a PHP programmer, but I'm currently working on a project in MS Access 2003 and I'm a complete VBA newbie. I'm trying to do something that I could easily do in PHP but I have no idea how to do it in Access. The facts are as follows:
Tables and relevant fields:
tblItems: item_id, on_hand
tblProjects: project_id
tblProjectItems: project_id, item_id
Goal: Determine which projects I could potentially do, given the items on-hand.
I need to find a way to compare each project's required items against the items on-hand to determine if there are any items missing. If not, add the project to the list of potential projects. In PHP I would compare an array of on-hand items with an array of project items required, using the array_diff function; if no difference, add project_id to an array of potential projects.
For example, if...
$arrItemsOnHand = 1,3,4,5,6,8,10,11,15
$arrProjects[1] = 1,10
$arrProjects[2] = 8,9,12
$arrProjects[3] = 7,13
$arrProjects[4] = 1,3
$arrProjects[5] = 2,14
$arrProjects[6] = 2,5,8,10,11,15
$arrProjects[7] = 2,4,5,6,8,10,11,15
...the result should be:
$arrPotentialProjects = 1,4
Is there any way to do this in Access?
Consider a single query to reach your goal: "Determine which projects I could potentially do, given the items on-hand."
SELECT
pi.project_id,
Count(pi.item_id) AS NumberOfItems,
Sum(IIf(i.on_hand='yes', 1, 0)) AS NumberOnHand
FROM
tblProjectItems AS pi
INNER JOIN tblItems AS i
ON pi.item_id = i.item_id
GROUP BY pi.project_id
HAVING Count(pi.item_id) = Sum(IIf(i.on_hand='yes', 1, 0));
That query computes the number of required items for each project and the number of those items which are on hand.
When those two numbers don't match, that means at least one of the required items for that project is not on hand.
So the HAVING clause excludes those rows from the query result set, leaving only rows where the two numbers match --- those are the projects for which all required items are on hand.
I realize my description was not great. (Sorry.) I think it should make more sense if you run the query both with and without the HAVING clause ... and then read the description again.
Anyhow, if that query gives you what you need, I don't think you need VBA array handling for this. And if you can use that query as your form's RecordSource or as the RowSource for a list or combo box, you may not need VBA at all.
I am working currently on telecom analytics project and newbie in query optimisation. To show result in browser it takes a full minute while just 45,000 records are to be accessed. Could you please suggest on ways to reduce time for showing results.
I wrote following query to find call-duration of a person of age-group:
sigma=0
popn=len(Demo.objects.filter(age_group=age))
card_list=[Demo.objects.filter(age_group=age)[i].card_no
for i in range(popn)]
for card in card_list:
dic=Fact_table.objects.filter(card_no=card.aggregate(Sum('duration'))
sigma+=dic['duration__sum']
avgDur=sigma/popn
Above code is within for loop to iterate over age-groups.
Model is as follows:
class Demo(models.Model):
card_no=models.CharField(max_length=20,primary_key=True)
gender=models.IntegerField()
age=models.IntegerField()
age_group=models.IntegerField()
class Fact_table(models.Model):
pri_key=models.BigIntegerField(primary_key=True)
card_no=models.CharField(max_length=20)
duration=models.IntegerField()
time_8bit=models.CharField(max_length=8)
time_of_day=models.IntegerField()
isBusinessHr=models.IntegerField()
Day_of_week=models.IntegerField()
Day=models.IntegerField()
Thanks
Try that:
sigma=0
demo_by_age = Demo.objects.filter(age_group=age);
popn=demo_by_age.count() #One
card_list = demo_by_age.values_list('card_no', flat=True) # Two
dic = Fact_table.objects.filter(card_no__in=card_list).aggregate(Sum('duration') #Three
sigma = dic['duration__sum']
avgDur=sigma/popn
A statement like card_list=[Demo.objects.filter(age_group=age)[i].card_no for i in range(popn)] will generate popn seperate queries and database hits. The query in the for-loop will also hit the database popn times. As a general rule, you should try to minimize the amount of queries you use, and you should only select the records you need.
With a few adjustments to your code this can be done in just one query.
There's generally no need to manually specify a primary_key, and in all but some very specific cases it's even better not to define any. Django automatically adds an indexed, auto-incremental primary key field. If you need the card_no field as a unique field, and you need to find rows based on this field, use this:
class Demo(models.Model):
card_no = models.SlugField(max_length=20, unique=True)
...
SlugField automatically adds a database index to the column, essentially making selections by this field as fast as when it is a primary key. This still allows other ways to access the table, e.g. foreign keys (as I'll explain in my next point), to use the (slightly) faster integer field specified by Django, and will ease the use of the model in Django.
If you need to relate an object to an object in another table, use models.ForeignKey. Django gives you a whole set of new functionality that not only makes it easier to use the models, it also makes a lot of queries faster by using JOIN clauses in the SQL query. So for you example:
class Fact_table(models.Model):
card = models.ForeignKey(Demo, related_name='facts')
...
The related_name fields allows you to access all Fact_table objects related to a Demo instance by using instance.facts in Django. (See https://docs.djangoproject.com/en/dev/ref/models/fields/#module-django.db.models.fields.related)
With these two changes, your query (including the loop over the different age_groups) can be changed into a blazing-fast one-hit query giving you the average duration of calls made by each age_group:
age_groups = Demo.objects.values('age_group').annotate(duration_avg=Avg('facts__duration'))
for group in age_groups:
print "Age group: %s - Average duration: %s" % group['age_group'], group['duration_avg']
.values('age_group') selects just the age_group field from the Demo's database table. .annotate(duration_avg=Avg('facts__duration')) takes every unique result from values (thus each unique age_group), and for each unique result will fetch all Fact_table objects related to any Demo object within that age_group, and calculate the average of all the duration fields - all in a single query.
I'm writing an NHibernate criteria that selects data supporting paging. I'm using the COUNT(*) OVER() expression from SQL Server 2005(+) to get hold of the total number of available rows, as suggested by Ayende Rahien. I need that number to be able to calculate how many pages there are in total. The beauty of this solution is that I don't need to execute a second query to get hold of the row count.
However, I can't seem to manage to write a working criteria (Ayende only provides an HQL query).
Here's an SQL query that shows what I want and it works just fine. Note that I intentionally left out the actual paging logic to focus on the problem:
SELECT Items.*, COUNT(*) OVER() AS rowcount
FROM Items
Here's the HQL:
select
item, rowcount()
from
Item item
Note that the rowcount() function is registered in a custom NHibernate dialect and resolves to COUNT(*) OVER() in SQL.
A requirement is that the query is expressed using a criteria. Unfortunately, I don't know how to get it right:
var query = Session
.CreateCriteria<Item>("item")
.SetProjection(
Projections.SqlFunction("rowcount", NHibernateUtil.Int32));
Whenever I add a projection, NHibernate doesn't select item (like it would without a projection), just the rowcount() while I really need both. Also, I can't seem to project item as a whole, only it's properties and I really don't want to list all of them.
I hope someone has a solution to this. Thanks anyway.
I think it is not possible in Criteria, it has some limits.
You could get the id and load items in a subsequent query:
var query = Session
.CreateCriteria<Item>("item")
.SetProjection(Projections.ProjectionList()
.Add(Projections.SqlFunction("rowcount", NHibernateUtil.Int32))
.Add(Projections.Id()));
If you don't like it, use HQL, you can set the maximal number of results there too:
IList<Item> result = Session
.CreateQuery("select item, rowcount() from item where ..." )
.SetMaxResult(100)
.List<Item>();
Use CreateMultiCriteria.
You can execute 2 simple statements with only one hit to the DB that way.
I am wondering why using Criteria is a requirement. Can't you use session.CreateSQLQuery? If you really must do it in one query, I would have suggested pulling back the Item objects and the count, like:
select {item.*}, count(*) over()
from Item {item}
...this way you can get back Item objects from your query, along with the count. If you experience a problem with Hibernate's caching, you can also configure the query spaces (entity/table caches) associated with a native query so that stale query cache entries will be cleared automatically.
If I understand your question properly, I have a solution. I struggled quite a bit with this same problem.
Let me quickly describe the problem I had, to make sure we're on the same page. My problem came down to paging. I want to display 10 records in the UI, but I also want to know the total number of records that matched the filter criteria. I wanted to accomplish this using the NH criteria API, but when adding a projection for row count, my query no longer worked, and I wouldn't get any results (I don't remember the specific error, but it sounds like what you're getting).
Here's my solution (copy & paste from my current production code). Note that "SessionError" is the name of the business entity I'm retrieving paged data for, according to 3 filter criterion: IsDev, IsRead, and IsResolved.
ICriteria crit = CurrentSession.CreateCriteria(typeof (SessionError))
.Add(Restrictions.Eq("WebApp", this));
if (isDev.HasValue)
crit.Add(Restrictions.Eq("IsDev", isDev.Value));
if (isRead.HasValue)
crit.Add(Restrictions.Eq("IsRead", isRead.Value));
if (isResolved.HasValue)
crit.Add(Restrictions.Eq("IsResolved", isResolved.Value));
// Order by most recent
crit.AddOrder(Order.Desc("DateCreated"));
// Copy the ICriteria query to get a row count as well
ICriteria critCount = CriteriaTransformer.Clone(crit)
.SetProjection(Projections.RowCountInt64());
critCount.Orders.Clear();
// NOW add the paging vars to the original query
crit = crit
.SetMaxResults(pageSize)
.SetFirstResult(pageNum_oneBased * pageSize);
// Set up a multi criteria to get your data in a single trip to the database
IMultiCriteria multCrit = CurrentSession.CreateMultiCriteria()
.Add(crit)
.Add(critCount);
// Get the results
IList results = multCrit.List();
List<SessionError> sessionErrors = new List<SessionError>();
foreach (SessionError sessErr in ((IList)results[0]))
sessionErrors.Add(sessErr);
numResults = (long)((IList)results[1])[0];
So I create my base criteria, with optional restrictions. Then I CLONE it, and add a row count projection to the CLONED criteria. Note that I clone it before I add the paging restrictions. Then I set up an IMultiCriteria to contain the original and cloned ICriteria objects, and use the IMultiCriteria to execute both of them. Now I have my paged data from the original ICriteria (and I only dragged the data I need across the wire), and also a raw count of how many actual records matched my criteria (useful for display or creating paging links, or whatever). This strategy has worked well for me. I hope this is helpful.
I would suggest investigating custom result transformer by calling SetResultTransformer() on your session.
Create a formula property in the class mapping:
<property name="TotalRecords" formula="count(*) over()" type="Int32" not-null="true"/>;
IList<...> result = criteria.SetFirstResult(skip).SetMaxResults(take).List<...>();
totalRecords = (result != null && result.Count > 0) ? result[0].TotalRecords : 0;
return result;