I have a strange problem with xcopy in Windows XP Professional. I don't know if its a stupid question as I am specifying only a file as the source, so should I even expect any other behavior ? This is it:
I am using xcopy <src> <dest> /s/y.
<src>=C:\sourcefolder\a\b\c\d\something.java and
<dest>=C:\destinationfolder.
Now xcopy copies the file but does not create the directory structure \a\b\c\d\ inside C:\destinationfolder .
what I want is C:\destinationfolder\a\b\c\d\something.java and
what I get is C:\destinationfolder\something.java
I have tried to run it in destination folder C:\destinationfolder by specifying a . for target folder
Tried it without any target in above
There is a script I have which calls xcopy iteratively so I am left with C:\destinationfolder\many java files without any directory structure.
A. Yes I have done xcopy /? to see all options
B. /T also does not create any empty directory structure
C. I can not go to source folder a\b\c\d\ and run xcopy . <dest>
UPDATE
I removed my previous answer on using ROBOCOPY. I believe the following will do what you want using XCOPY.
Assuming your folder structure is like this:
SOURCE = C:\MyJavaStuff\A\B\C\D\something.java
DEST = C:\MyDestination
Run XCOPY like this:
XCOPY C:\MyJavaStuff\something*.java C:\MyDestination /S /E
Note the * in something*.java.
The problem is that you are specifying which file to copy in the source. xcopy won't create the folder structure in this case. However, if you change your call to xcopy to
xcopy *.java C:\myfolder /s/y
it will copy the .java files and the folder structure as well. You need to specify a wildcard for this call to work as you want. If you want only to copy specific files, you will have to adjust the call to xopy, e.g.:
xcopy something.jav* C:\myfolder /s/y
Edit
You say that you get the list of files to copy from another command. If you can output this list of files in a text file, you could do the following:
FOR /F "tokens=* delims=," %F in (d:\test\list.txt) DO xcopy src\%~nxF* .\dest /S /Y
What this command does is read a text file ("d:\test\list.txt" in this case), read every line, and for each file, run xcopy, adding a wildcard at the end of the file name to make sure it creates the folder structure.
I'm assuming here that:
You can get the list of files in a text file, with only the file names (and optinally the paths)
You know the source folder ("C:\sourcefolder" in your example, the folder structure "a\b\c\d" does not need to be known) and can use it in the FOR command.
You can also use the following form:
FOR /F "tokens=* delims=," %F in ('cmd') DO xcopy src\%~nxF* .\dest /S /Y
where cmd needs to be replace with the command you use to generate your list of files to copy.
Note that if you use this FOR command in a batch file, you need to replace %F with %%F (and %~nxF* with %%~nxF*).
I had a look at the xcopy switches and you can copy the directory structure with /T, although that doesn't copy empty directories you can override this with /E. So your command would look like this:
xcopy C:\sourcefolder\a\b\c\d\something.java C:\destinationfolder /T /E /S /Y
Hope this helps!
In order to get C:\destinationfolder\a\b\c\d\something.java XCOPY needs to know how much of C:\sourcefolder\a\b\c\d\something.java to duplicate.
You can use:
C:
cd \sourcefolder
XCOPY something.java* C:\destinationfolder\ /S
Just be aware that this may have the side effect of also copying C:\sourcefolder\oops\something.java to C:\destinationfolder\oops\something.java as well as any other matches for something*.java under C:\sourcefolder\.
It seems to me that xcopy is typically used for copying directory trees, not single files (though it can work). And, xcopy will recreate the directory structure under the source folder in the target folder. If xcopy is given the /i switch, the target folder is assumed to be a directory. It will be created if it does not exist, even if there are multiple parents that need to be created.
You have C:\MyJavaStuff\A\B\C\D\something.java - that is your source. You want to end up with something.java not in C:\destinationfolder, but in C:\destinationfolder\A\B\C\D - so that is your target. You don't even have C:\destinationfolder. That is OK, with /i the entire path will be created.
xcopy /i c:\MyJavaStuff\A\B\C\D\something.java C:\destinationfolder\A\B\C\D
If something.java were the only file under C:\MyJavaStuff, you could also use
xcopy /sei c:\MyJavaStuff C:\destinationfolder
That would recreate the entire tree structure, copying your file. But if there are other files (and folders) under MyJavaStuff they would also be copied.
I have written a very similar batch file using xcopy. Perhaps what I did will help you.
This is the command I used:
xcopy "c:\Data Files\Dave's Data\*.*" "m:\Dave's Data" /R/D /E/H
In this case, Dave's Data on the source contains an entire directory tree containing at least 50,000 files & exceeding 75GB data. It runs perfectly on Windows XP
I found /T was unnecessary as the directory tree is copied. I also found /S was unnecessary as /E copied directories & sub-directories including empty ones. I included /R to copy & overwrite read only files on the destination. /H copied hidden directories. /D copied only newer files. I use this as a daily backup tool for my data.
The only problem I have is while this command will work on Windows 7 the first time, it will not work on subsequent runs when the destination directory tree exists. I suspect this is due to a privilege issue as the xcopy command will work on subsequent runs on Windows 7 within a cmd.exe window.
Related
I am looking to copy all text files on the C drive, but the program needs to avoid text files that are part of the system, and only copy the text files that have been created by the user.
Is there a built in way to do this, or do I need to get creative? If so, how would you go about it? I would like to keep it within batch and not involve powershell or anything like that.
I thought about using creation dates to determine whether or not a file is a system file, but that didn't work all the way.
You can generate a list of all systemfiles using the dir command. So
dir /b /as > %USERPROFILE%\excluded_Files.txt
Would generate a list of the systemfiles from that directory.
Using xcopy as described here you can now copy all files from one directory to another excluding the systemfiles.
The xcopy command should be something like this:
xcopy C:\firstDirectory\*.txt C:\secondDirectory /EXCLUDE:%USERPROFILE%\excluded_Files.txt
Edit
So your code that is there would copy all rtf and txt files from the whole C drive to Drive D folder E.
A batch-file using my method would look like this:
#echo off
cd /d C:\
dir /b /as /s > %USERPROFILE%\excluded_Files.txt
xcopy C:\*.rtf D:\E /EXCLUDE:%USERPROFILE%\excluded_Files.txt /s
xcopy C:\*.txt D:\E /EXCLUDE:%USERPROFILE%\excluded_Files.txt /s
Explanation:
#echo off supresses redundant output of the commands that would be displayed before execution.
cd /d C:\ changes the current execution directory to the root of the C drive. /d is added for potential drive change.
dir /b /as /s > %USERPROFILE%\excluded_Files.txt redirects the output of the dir command into a file in your userprofile (Usually C:\Users\yourUserName). The switch /b will only show the filenames and not size, creation date etc. /as will only list system files and /s makes the dir command work recursively through all directories.
xcopy C:\*.rtf D:\E /EXCLUDE:%USERPROFILE%\excluded_Files.txt /s will copy all rtf files from C:\ to D:\E and exclude all files from the list previously created (that will contain all system txt and rtf files (as well as others)). /s makes xcopy work recursively as for dir.
Next line is a copy of the same with txt files.
I'm creating a batch file that deletes all Rar$DIa0.??? folders in the %TEMP% directory.
Is this possible, and how to do it?
The ??? is three randomized numbers. And that's where I have trouble with - deleting all folders that have Rar$DIa0. in the name.
for /d is designed for just this type of use. Something like this should work (remove one of the % if you're testing from the command line):
for /d %%i in ("%TEMP%\Rar$DIa0.???") do rd "%TEMP%\%%i"
The /d makes it work on directory names instead of file names.
If you want to make it easier on yourself, change to the %TEMP% folder first:
pushdir
cd /d %TEMP%
for /d %%i in ("Rar$DIa0.???") do rd "%%i"
The ??? makes it only act on folders that have three letters after a .. If your folders don't have just a three letter extension, change .??? to .*. If you've got a typo, and there is no actual . in the foldername, just remove it and use Rar$DIa0??? or Rar$DIa0*
You may want to test it first by changing rd to echo to make sure you get the folders you want before actually deleting them.
For more information about for (pun intended) type for /? from a command prompt.
The command line to use in a batch file for this task is:
#for /D %%I in ("%TEMP%\Rar$DIa0.*") do #rd /Q /S "%%I"
Command FOR with option /D searches in folder defined by environment variable TEMP for subfolders with folder name starting with Rar$DIa0. not having hidden or system attribute set.
The loop variable I holds for each found subfolder matching this folder pattern the name of found folder with full path without double quotes although the path to temp folder very often contains 1 or more spaces.
For that reason just the command RD with the parameters /Q for quiet execution and /S for deleting also all subfolders in the specified folder must be called with referencing the current value of loop variable I enclosed in double quotes.
For understanding the used commands and how they work, open a command prompt window, execute there the following commands, and read entirely all help pages displayed for each command very carefully.
for /?
rd /?
By the way: WinRAR deletes the temporary folders usually automatically, except a file is opened from within an archive for viewing/modifying it in another application and WinRAR is closed before the other application is exited with the opened file. In this case WinRAR can't delete the temporary folder with temporarily extracted file because the file is still opened in another application. Of course also command RD can't delete the temporary folder if this folder is still the current directory of another application or a file in this folder is still opened by another application with a read/write access lock.
I'm wondering if it is possible to set up a batch command to perform this action.
Once .bat file is executed, ALL images from folders and sub-folders would be copied to my location on the desktop.
Example:
Original folder is located:
\intranet\file_location\PP Complete Images (in this folder will be loads of other folders and in those folders there will be .jpg images)
Destination file would be based on the desktop.
So I need to extract .jpg images from all folders and sub-folders.
If image already exists in original folder, skip the image or overwrite as script will be executed every morning.
Or should I look for a software to do this for me?
Existing code:
cd c:
cd\
copy "\\intranet\PP Complete Images\Master Image Folder*.jpg" "C:\Users\username\Desktop\Master Image Folder"
copy "\\intranet\PP Complete Images*.jpg"
exit
How do you want it?
It isn't quite clear to me, how the result exactly should be -- should it be flattened or should it be hierarchical as well?
Look at this for example:
source
folder-1
folder-1-1
image1.jpg
folder-1-2
image2.jpg
cheese.jpg
image3.jpg
some_text.txt
folder-2
folder-2-1
image3.jpg
some_music.mp3
cheese.jpg
target
Should the result be basically a copy of the shown hierarchy (without any other file than the jpgs), or should it be a flattened result like this one:
source
... (see above)
target
image1.jpg
image2.jpg
cheese.jpg
image3.jpg
image3.jpg
How can you do it?
Flattened
You can use DOS' for command to walk directories1 and make a custom function2 to handle the files:
#ECHO OFF
for /r %%f in (*.jpg) do call:copyFile %%f
GOTO END
:copyFile
copy /V /-Y %~1 ..\target
GOTO:EOF
:END
Meaning: for every %%f in the listing of *.jpg from the current working dir, execute function copyFile. The /r switch makes the listing recursing (walk through all subdirectories).
In the function, the argument passed to it (now known as %~1) is passed to the copy function: Copy the file to the target directory which is ..\target in this case. /V lets copy verify the result, /-Y lets it ask for permission to overwrite files. See copy /?!
Very big problem: If you have one or more files in different subfolders of your source directory, which have the same name (like the two cheese.jpgs in my example), you will loose data!
So, I wouldn't recommend this approach, as you risk loosing data (digital cameras are not very creative in naming pictures!).
Hierarchical
Just use robocopy:
robocopy /S <sourcedir> <targetdir> *.jpg
/S creates and copys subfolders as well. You can also use /DCOPY:T to make the directories have the same timestamp than the original ones or /L to preview the actions of robocopy.
Small problem: The /E switch handles subfolders as well, even if they are empty. /S handles subfolders as well, but not, if they are empty. But it handles them, if they are not empty, but have no JPG inside -- so, subfolders without JPGs will result in empty folders in the target folder.
Robocopy has loads of parameters, so check out robocopy /?.
Hope this helps! :-)
1Found here: How to traverse folder tree/subtrees in a windows batch file?
2Found here: http://www.dostips.com/DtTutoFunctions.php
Your existing code:
the cd c: is incorrect. To switch the current drive to c: use
c:
The cd \ is redundant. Your remaining code specifies the directories, so the current directory is irrelevant.
Your first copy command has three problems. Master Image Folder*.jpg means all filenames beginning Master Image Folder and ending .jpg. You probably meant Master Image Folder\*.jpg meaning all files ending .jpg in ...\Master Image Folder\
C:\Users\username\Deskto... is probably an error. It is a literal path, so the actual directory would be C:\Users\username\Deskto... You would probably need C:\Users\%username%\Deskto... to substitute-in the current username.
And then the job would stop on a filename-match, so either you'd be pressing A to overwrite all or you'd be pressing y or n for each name-match.
Your final copy command has no specified destination directory.
You can edit-in your actual code by using the edit button under the original text window, cutting-and-pasting your actual code - censoring if necessary, selecting the resultant code block and pressing the {} button above the edit box which indents each line with the effect of formatting and hilighting the code.
The simplest solution is probably to use
xcopy /d /y /s "\\intranet\PP Complete Images\Master Image Folder\*.jpg" "C:\Users\%username%\Desktop\Master Image Folder\"
which will copy updated files (/d) with automatic overwrite (/y) and scanning subdirectories (/s) from-name/mask to-directory.
This would create an identical directory-hierarchy to the original subtree under the destop's Master Image Folder directory.
You could extend this to
for %%a in (
"\\intranet\PP Complete Images\Master Image Folder"
"\\intranet\wherever\somewhere"
) do xcopy /d /y /s "%~a\*.jpg" "C:\Users\%username%\Desktop\Master Image Folder\"
to perform the same action on multiple directory-subtrees; but you need to ensure that the destination directory is not within any subtree selected for inclusion in the list within the parentheses.
I'd advise against "flattening" the output because if you do that, the latest whatever.jpg from each of the subtrees will end up in your destination directory, without notification that there are many possibly different whatever.jpg versions.
I do believe the solution to your problem would be Robocopy.
Robocopy is just plain awesome!
Here is the syntax of robocopy-
robocopy [Source] [Destination] [File] [...] [options]
Source
Specifies the source folder. Where you want to take the files from.
Destination
Destination directory/folder.
File
Here we are! This is what will help you. Here you can specify an extension you want to move. So in your case, your code would look somewhat like this.
robocopy *.jpg c:\destinationdir /S /MAX:1048576
*To execute this .bat every morning go to a program called task scheduler, dont worry, its built into windows. http://windows.microsoft.com/en-US/windows/schedule-task#1TC=windows-7
*Then Click on Create basic task, and set your task to whenever you like!
Thanks guys for your help!!!
I got it solved and there is a code below if someone would ever need something similar:
pushd Z:\intranet\PP Complete Images\
for /r %%a in (*.jpg) do (
XCOPY /Y "%%a" "C:\Users\username\Desktop\Master Image Folder"
)
popd
I want to use a batch file to synchronize 2 folders on Windows, and I'm using the xcopy command like this
xcopy /s /d <Original Folder> <Destination Folder>
It's working perfectly because I just want to overwrite only the modified ones, but I have 1 tiny problem, when I delete a file from the original folder, that file remains in the destination folder when i run the batch file, breaking the synching I want to achieve... I think this can't be done with xcopy, but I don't know which command I should use in case I delete a file in the original folder.
EDIT: This programs is for people who don't understant a lot of PC's so i don't want to install anything in their pc's. Just want a plain batch file to keep the 2 folders synchronized
SOLUTION: Thanks to Kuba Wyrostek I got to this command
robocopy <Original Folder> <Destination Folder> /e /purge
Thank you all for your time
xcopy has no such option. Your alternatives are:
rsync - http://rsync.samba.org
robocopy - http://technet.microsoft.com/en-us/library/cc733145.aspx
To refine your answer, you can simply do:
robocopy <Original Folder> <Destination Folder> /mir
/mir mirrors a directory tree (equivalent to /e plus /purge).
The XCOPY command for copying the updates from one folder to another is as follows:
C:\> XCOPY C:/SOURCE D:/DESTINATION /E /D /C /Y
The flags used in the above example have the following meanings:
/E causes all folders and sub-folders to be copied
/D causes a DATE comparison to be made, only copying items that are newer than the DESTINATION item. If the DESTINATION is older, or does not contain the file, then it will be copied.
/C tells XCOPY to continue if it encounters an error - typically errors occur with read-only files, or files that have protected permissions
/Y tells XCOPY to suppress prompting you for confirmation, which is necessary if you intend to create an automation script or scheduled task
I know this is old, but I have a question. Can this not be done with the correct xcopy commands.
Folder 1: c:\workingFolder\"contents here"
Folder 2: d:\workingFolderSync\"contents here"
Batch file below
xcopy "c:\workingFolder\*.*" "d:\workingFolderSync\" /i /s /d /y
xcopy "d:\workingFolderSync\*.*" "c:\workingFolder\" /i /s /d /y
pause
( I usually remove the pause after i test and know the batch works. )
But this will only copy contents from the folder to the other if its newer.
Then it looks in the destination folder and copies contents from destination back to source if it is newer. This reproduces what syncing does, except for the in real time monitoring of modified files. Creating a proper task schedule can actually implement running this command at specific times to almost perfectly reproduce syncing. You can also run this before modification on a machine and after modification on a machine. Even doing the same thing on a second machine if your using a network drive to sync.
Your method will have two main problems:
Files deleted from one folder will be reinstated by the copy left in the other folder the next time you run your xcopy
Renaming files can cause chaotic results.
I would like to know how to copy a folder to another folder in a batch file.
I would like stuff with the same name to be overwritten.
Thanks.
Unless I'm missing something, the easiest way is with xcopy (provided you actually mean .bat files on Windows):
xcopy <SOURCE> <DEST> /e /d /y /h /r /c
To explain those flags:
/e: Include directories and sub directories even if empty
/d: Only copy files which have changed on SOURCE more recently than DEST
/y: Suppress prompts
/h: Also copy hidden and system files
/r: Override read-only files (e.g. ignore Read Only flag)
/c: Continue even if there are errors
Source: My standard backup script, been running every day for 6 years.
or take a look at ROBOCOPY en.wikipedia.org/wiki/Robocopy